Database Develop

[Q] I need help restoring the stock ROM, please =[

Hi,
Firstly, I would just like to say, if this has been covered already, I apologize sincerely.
I have recently rooted and unlocked the bootloader on my XL. Unfortunately, I executed the process the wrong way round (rooted first) and subsequently lost all USB storage connectivity as well as messed up my location settings and lockscreen icons (which no longer appear...ever).
To remedy this, I flashed RCMix3D (which I must say, is a fantastic ROM) and it seemed to remedy all problems.
The problem I'm having now is that I am wanting to sell my device due to financial problems, but to sell it to a store, it needs to be on the stock ROM. I have a nandroid backup of the original ROM but it is faulty (no USB connectivity etc) and I cannot sell it with the custom ROM (I tried selling a Samsung Galaxy Ace to them a while ago and it was refused because it had a custom ROM).
So my question is this: How can I get back to a fully functional stock ROM? All guidance and resources are kindly appreciated.
PS. I purchased my device in the U.K and I am my carrier is Three.
Thank you for your time,
Jim

1. Enter FASTBOOT, and then connect to your computer (FASTBOOT USB will be shown)
2. Open command prompt in your computer
3. Relock your device bootloader by typing
Code:
fastboot oem lock
*device will reboot*
4. Enter FASTBOOT again (you will see *** RELOCKED ***)
5. Apply this RUU
6. You device will be back to stock rom unrooted !
C/P

jeandujardin01 said:
1. Enter FASTBOOT, and then connect to your computer (FASTBOOT USB will be shown)
2. Open command prompt in your computer
3. Relock your device bootloader by typing
Code:
fastboot oem lock
*device will reboot*
4. Enter FASTBOOT again (you will see *** RELOCKED ***)
5. Apply this RUU
6. You device will be back to stock rom unrooted !
C/P
Click to expand...
Click to collapse
You sir, are a legend. Many thanks!
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium

jeandujardin01 said:
1. Enter FASTBOOT, and then connect to your computer (FASTBOOT USB will be shown)
2. Open command prompt in your computer
3. Relock your device bootloader by typing
Code:
fastboot oem lock
*device will reboot*
4. Enter FASTBOOT again (you will see *** RELOCKED ***)
5. Apply this RUU
6. You device will be back to stock rom unrooted !
C/P
Click to expand...
Click to collapse
Also, I noticed that RUU file is an exe. file. Is this correct? If so, do I just run in on my PC?
Many thanks again

jimbo.levy said:
Also, I noticed that RUU file is an exe. file. Is this correct? If so, do I just run in on my PC?
Many thanks again
Click to expand...
Click to collapse
Yes the RUU is a Windows PC program. Just run it and follow the instructions.

YES! the RUU provided helped me out when i bricked my sensation xl. and the 'flash oem lock' does the trick.

please tell me how can I go to fastboot and do that command

[Q] Vivid Boot Loop

Could i get some help... i have read and read. But my HTC vivid is stuck in boot loop. I was tring to install the [SUPERGUIDE] BOOTLOADER UNLOCK/PERMROOT/CWM/Flash ROM or Kernel/Revert to Stock in the Vivid forums.
Maybe a link?
Thanks if its posted already.

mikewilld said:
Could i get some help... i have read and read. But my HTC vivid is stuck in boot loop. I was tring to install the [SUPERGUIDE] BOOTLOADER UNLOCK/PERMROOT/CWM/Flash ROM or Kernel/Revert to Stock in the Vivid forums.
Maybe a link?
Thanks if its posted already.
Click to expand...
Click to collapse
what?
all the info is right there. what exactly are you trying to do? i mean, that thread has literally tons of information in it....and without you specifying what EXACTLY you are trying to do, nobody can help you.

Have you tried relocking your bootloader and then running the RUU.
Are you able to get into fastboot?
Like PG said.....we need more to go on?
Sent from my HTC PH39100 using xda premium

I read the instructions and apparently i messed up somewhere. I can get in fast boot.
When i turn my phone on i see the white HTC logo shuts off and see the HTC logo again.

Also when i go in to hboot and go to recover i get a HTC logo and a quick blink of the next screen and then it goes into a boot loop again.

Try putting in hboot....then select fastboot.
Relock the bootloader "fastboot oem lock"
Download and run RUU.
Sent from my SGH-i937 using XDA Windows Phone 7 App

i read to not do a OEM lock unless im sure i have the correct software on my device? how can i make sure?

mikewilld said:
i read to not do a OEM lock unless im sure i have the correct software on my device? how can i make sure?
Click to expand...
Click to collapse
and WHERE does it say that?
6) (Optional) Return to stock (locked bootloader, unrooted, etc) (Many thanks to Pirateghost)
- First, you are going to need to re-lock your bootloader.
- Boot into H-Boot by powering off. Once off, power back on and hold VOL DOWN + POWER BUTTON, once in HBOOT go to "fastboot" and click the power button to select
- Download the adbfastbootrecovery zip from the bottom of the post and EXTRACT it to your desktop
- Go to your computer file explorer and find your desktop "folder", hold SHIFT and RIGHT CLICK, select open a command window here
- Run this code in the command prompt
Code:
fastboot oem lock
- Now reboot
- Now, we will flash you back to the original stock ROM you were on. There are two options for this, the second does NOT need a windows device.
FIRST OPTION (RUU)
- Pick the RUU for your specific device. For example, the one for AT&T has the word "Cingular" in it, the one for Rogers says "Rogers" in it.
- You will find the RUU's here http://www.filefactory.com/f/002b74e0f4775869/ (THANKS to user football)
- Once you download the correct RUU, make sure your phone is plugged in via USB to your computer and you have the correct drivers (or just HTC Sync) installed on your computer
- Run the executable and follow the steps to flash the stock ROM
- Once the ROM loads, you should be good to go
- If you returned to stock because of a bug or issue, and want to root again, make sure to go back and follow the steps PRECISELY to perm root, flash CWM, flash a ROM, flash a kernel, etc. Remember, flash ROM IMMEDIATELY after flashing the kernel
OR
SECOND OPTION (PH39IMG.zip flash)
- Put this file for AT&T or this file for Rogers on a microSD card as is (it should be named PH39IMG.zip)
- Power down the phone, insert microSD and boot back into bootloader (power button + vol down)
- It should automatically find the zip file and flash the stock image (this includes recovery, system, everything stock.)
- If you returned to stock because of a bug or issue, and want to root again, make sure to go back and follow the steps PRECISELY to perm root, flash CWM, flash a ROM, flash a kernel, etc. Remember, flash ROM IMMEDIATELY after flashing the kernel
Click to expand...
Click to collapse

I have spent 3 hours working on this... and feel stupid... like the video said... I'm a n00b

[Q] Help for stock ROM

Hi all, i need as soon as possible your help. I need to go back to stock ROM, since i have to send my phone in warranty beacouse the display is broken. I need to know every step i have to do. Your help will be really appreciate.

ParadiseCity said:
Hi all, i need as soon as possible your help. I need to go back to stock ROM, since i have to send my phone in warranty beacouse the display is broken. I need to know every step i have to do. Your help will be really appreciate.
Click to expand...
Click to collapse
Download correct ruu, in fastboot mode type fastboot oem lock in cmd and flash ruu when phone is fully rebooted.
For locking bootloader, step 6: http://forum.xda-developers.com/showthread.php?t=1578546
and for ruu chapter 4: http://forum.xda-developers.com/showthread.php?t=1693896

AlluXX said:
Download correct ruu, in fastboot mode type fastboot oem lock in cmd and flash ruu when phone is fully rebooted.
For locking bootloader, step 6: http://forum.xda-developers.com/showthread.php?t=1578546
and for ruu chapter 4: http://forum.xda-developers.com/showthread.php?t=1693896
Click to expand...
Click to collapse
6.open the terminal in your computer and type in 'adb devices', you probably will see an empty list, no devices. Just follow step 7
7. type in 'fastboot oem lock' without quotes and your device is locked again, you will see relocked - you might see a warning under it but that's nothing, after rebooting the warning will go away.
I haven't understand these lines. Can u explain me, what does mean "adb devices"?

Sv: [Q] Help for stock ROM
ParadiseCity said:
6.open the terminal in your computer and type in 'adb devices', you probably will see an empty list, no devices. Just follow step 7
7. type in 'fastboot oem lock' without quotes and your device is locked again, you will see relocked - you might see a warning under it but that's nothing, after rebooting the warning will go away.
I haven't understand these lines. Can u explain me, what does mean "adb devices"?
Click to expand...
Click to collapse
Most easy way to flash stock ROM is when device is unlocked , s-off it and run the ruu. If you relock the device you can't flash a GB ROM if you had used stock ICS.
Sent from my Sensation XL using xda app-developers app

anders3408 said:
Most easy way to flash stock ROM is when device is unlocked , s-off it and run the ruu. If you relock the device you can't flash a GB ROM if you had used stock ICS.
Sent from my Sensation XL using xda app-developers app
Click to expand...
Click to collapse
I have installed SDK Android tools, but when i write on CMD "fastboot oem lock" it says "this command is unknown". Why?

ParadiseCity said:
I have installed SDK Android tools, but when i write on CMD "fastboot oem lock" it says "this command is unknown". Why?
Click to expand...
Click to collapse
1- download rom ship
2- relock loader
+ into flash mode
+ Run command in "platform-tools" Folder: "fastboot oem lock"
+ run rom ship RUU - - -ok

R: [Q] Help for stock ROM
chikaro24 said:
1- download rom ship
2- relock loader
+ into flash mode
+ Run command in "platform-tools" Folder: "fastboot oem lock"
+ run rom ship RUU - - -ok
Click to expand...
Click to collapse
How can i flash ruu? Will i have access to recovery?
Inviato dal mio HTC Sensation XL with Beats Audio X315e con Tapatalk 2

Flashing an ruu is done via computer with a windows os

Complete Rooting HTC Butterfly s

Disclaimer:- Below mentioned links was upload By @daorderdillon this thread is comprehensive and explains in lot more detail
S-off,Rooting,firmware install,ota install,Rom install for butterfly s.
Carefully read each step before acting
don't use any kind of screen locks
Use this link to download 901e or 901s model attachments
Before We Begin
Have a micro USB cable handy.
Download and install the HTC USB drivers. Do this by downloading and installing HTC Sync Manager and following the instructions. HTC can be found by going to this link.
You will need this link to download adb and fastboot we will use it later.
All ways remember to uncheck "fastboot" in power tab in settings
Go to setting tap power go to end
And enable USB debugging
Go to setting tap "about" then tap "Software information" then tap then tap 7 times on "build number" to enable developer option enable in settings.
How to unlock Bootloader butterfly s?
Use this link to unlock Bootloader warning this may void your warranty***tampered*** and ***unlocked*** will be written in bootloader but don't worry we will remove it with S-off
if your device not listed use "all other supported device"
Only unlock bootloader isn't much help you will need s-off as well soooo....
How to get S_off butterfly s?
With S-off in other words security off you will be doing a lot of modifications.
We will use Firewater.
YOU HAVE TO BE ON STOCK RECOVERY AND ROM TO PERFORM THIS ACTION
otherwise it will fail horribly
Use this link to s-off
Remove only sync not drivers.
read carefully at firewater instructions.
you will be s-off.
How to Flash firmware butterfly s?
Back up using nandroid google it how to?
This is a test device will be written in recovery so be carefull what you wish for but you can remove it i don't know how but you can search for it in google.
S-off and unlocked bootloader needed
If you have stock CID you can proceed to step 1. If you have any other CID you need to change it before beginning. In this example I am talking about HTC__621 901e model.
Asia with CIDs HTC__044
Hong Kong with CIDs HTC__622
Taiwan with CIDs HTC__621
open up a command window in adb director in C:\adb or where ever you put adb and fastboot
hold shift and click right mouse button to open up a "command window here"
Type these commands.
Write the stock CID back to device by running this:
"adb reboot-bootloader" without ""
Phone should boot to the bootloader. Now run:
"fastboot oem writecid HTC__621" I prefer use this
or you can write
"fastboot oem writecid 11111111"
Now verify that the CID shows on the bootloader screen by running:
fastboot reboot-bootloader
Reboot device if CID on bootloader screen shows the CID. If not retry
*****The next step will wipe the entire contents of the device which includes all of your data. Be sure to back it up to a PC so you can transfer it onto the new device if needed.*****
These instructions are assuming you are running a Windows OS. If you are not then these exe RUU’s won’t be of much use.
Download the firmware.zip file and place in your ADB/fastboot folder. I would recommend renaming the zip file to something simple like ruu.zip.
Boot your phone into the bootloader by holding the power and vol up/down buttons at the same time until you see the bootloader screen or if you have your phone booted you can use the ADB command:
adb reboot-bootloader
Now use these fastboot commands:
fastboot oem rebootRUU
Should see the Silver HTC logo. Now issue this command to flash your phone using the ruu.zip file:
fastboot flash zip ruu.zip
Now the first time you issue a command to flash firmware/ruu in fastboot it only prepares the flash. You have to issue the exact command again:
fastboot flash zip ruu.zip
The green status bar usually does not reach the 100% mark. When the output in the command window is complete, you can reboot:
fastboot reboot
**Notes about the RUU.zip method. You still need to have the proper CID for the RUU. You can run the RUU.zip with super CID, but you will have to lock your bootloader first. If you are running the RUU.zip as base to downgrade all your firmware because you are going to then going to restore a stock Nandroid so the RUU might not be made for your MID, so you may need to edit the android-info.txt inside the ruu.zip to include your MID or CID.
if you have sucessfully did this you can see hboot 1.54
How to install ota butterfly s?
YOU HAVE TO BE ON STOCK RECOVERY,ROM AND S-off TO PERFORM THIS ACTION
1. Check ROM version in Settings-About-Software Information, it MUST match second value in example case 1.21.709.3-1.12.709.2, if you have version different from 1.12.709.2, update will FAIL.
2. Make sure that your device running system without any app/files modifications, otherwise update will FAIL.
3. Your device must be S-OFF AND/OR LOCKED or RELOCKED, being S-ON and UNLOCKED won’t allow you to apply OTA update.
4. Check your recovery, official OTA can be applied ONLY on Stock Recovery, TWRP/CWM/PhilzTouch and etc can’t be used.
5. Now we can copy out OTA package in system storage, I recommend to copy file in root of the Internal Storage but its not necessary.
6. Turn off device.
7. Press Power button and Volume down button, keep them until you see bootloader.
3. After that use volume down button to make a choice at Recovery option and press Power button. Device will reboot in Recovery mode.
4. When recovery starts, you will see red triangle, don’t worry nothing bad happened.
5. Wait for a while and press both Volume buttons and click Power button. This combination allows you to enter Recovery menu.
6. Using volume buttons, navigate to ”apply from phone storage” option and press Power button.
7. Now you can choose your OTA package. In our example it will be stored in data/media/0/OTA_DLXPLUS_U_JB_50_hTC_Asia_TW_1.21.709.3-1.12.709.2_release_333902.zip then press Power button.
8. During installation you might need to follow some instructions on screen. Reboot device when installation finishes.
9. After reboot you will get message that you successfully updated your device
10.If you have already modified you device to a point where no OS is showing in hboot the device will reboot several times.
11.If you want JB 4.3
with sense 5.5 just download it normally in system updates.
if download ota fail
Go to cwm in advance format every thing except external sd card
format system
format internal storage
etc
flash stock firmware
flash cwm recovery
flash stock rom
flash stock recovery
then flash ota
read above and below how to flash
How to install Rom butterfly s?
In order to install rom you will need CWM or Twrp I recommend CWM
1.Boot your HTC Butterfly S into bootloader mode by pressing Volume Down and Power at the same time when it boots up.
2.Connect your HTC Butterfly S to your PC using your micro USB cable.
3.Open a command prompt window in where you put recovery-clockwork-touch-6.0.3.4-dlxpul.img. Do this by going into the fastboot folder, hold down the shift key and right clicking. Once you’ve right clicked, the windows context menu will appear. Select the option ‘open command window here’. A command prompt window will then appear.
4.To flash the custom recovery, enter the command below into the command prompt window.
"fastboot flash recovery recovery-clockwork-touch-6.0.3.4-dlxpul.img"
How to Root butterfly s?
1.Dowload This
2.Put it in internal storage.
3.Reboot into recovery.
4.Use CWM to install zip from sd.
5.Select downloaded .zip.
6.that's it reboot and you are rooted.
How to install rom butterfly s?
1.Download above stock_dlxpul_1.21.709.3.zip or choose from this
2.Put it in internal storage.
3.Reboot into recovery.
4.Use CWM to install zip from sd.
5.Select downloaded .zip.
6.that's it reboot and you have new rom installed.
For more Guide go to This

Is this working with updated OTA 4.4.2 / HBOOT 1.57. I need root to address some issue on KitKat (battery, SD access). Thanks!

unroot htc butterfly s
can someone help me give link to UNROOTING HTC butterfly s? Thanks

rifin2000 said:
can someone help me give link to UNROOTING HTC butterfly s? Thanks
Click to expand...
Click to collapse
i'm looking for that too

Are not root!! please help me !!!!!!

butterfly s 901e said:
Disclaimer:- Below mentioned links was upload By @daorderdillon this thread is comprehensive and explains in lot more detail
S-off,Rooting,firmware install,ota install,Rom install for butterfly s.
Carefully read each step before acting
don't use any kind of screen locks
Use this link to download 901e or 901s model attachments
Before We Begin
Have a micro USB cable handy.
Download and install the HTC USB drivers. Do this by downloading and installing HTC Sync Manager and following the instructions. HTC can be found by going to this link.
You will need this link to download adb and fastboot we will use it later.
All ways remember to uncheck "fastboot" in power tab in settings
Go to setting tap power go to end
And enable USB debugging
Go to setting tap "about" then tap "Software information" then tap then tap 7 times on "build number" to enable developer option enable in settings.
How to unlock Bootloader butterfly s?
Use this link to unlock Bootloader warning this may void your warranty***tampered*** and ***unlocked*** will be written in bootloader but don't worry we will remove it with S-off
if your device not listed use "all other supported device"
Only unlock bootloader isn't much help you will need s-off as well soooo....
How to get S_off butterfly s?
With S-off in other words security off you will be doing a lot of modifications.
We will use Firewater.
YOU HAVE TO BE ON STOCK RECOVERY AND ROM TO PERFORM THIS ACTION
otherwise it will fail horribly
Use this link to s-off
Remove only sync not drivers.
read carefully at firewater instructions.
you will be s-off.
How to Flash firmware butterfly s?
Back up using nandroid google it how to?
This is a test device will be written in recovery so be carefull what you wish for but you can remove it i don't know how but you can search for it in google.
S-off and unlocked bootloader needed
If you have stock CID you can proceed to step 1. If you have any other CID you need to change it before beginning. In this example I am talking about HTC__621 901e model.
Asia with CIDs HTC__044
Hong Kong with CIDs HTC__622
Taiwan with CIDs HTC__621
open up a command window in adb director in C:\adb or where ever you put adb and fastboot
hold shift and click right mouse button to open up a "command window here"
Type these commands.
Write the stock CID back to device by running this:
"adb reboot-bootloader" without ""
Phone should boot to the bootloader. Now run:
"fastboot oem writecid HTC__621" I prefer use this
or you can write
"fastboot oem writecid 11111111"
Now verify that the CID shows on the bootloader screen by running:
fastboot reboot-bootloader
Reboot device if CID on bootloader screen shows the CID. If not retry
*****The next step will wipe the entire contents of the device which includes all of your data. Be sure to back it up to a PC so you can transfer it onto the new device if needed.*****
These instructions are assuming you are running a Windows OS. If you are not then these exe RUU’s won’t be of much use.
Download the firmware.zip file and place in your ADB/fastboot folder. I would recommend renaming the zip file to something simple like ruu.zip.
Boot your phone into the bootloader by holding the power and vol up/down buttons at the same time until you see the bootloader screen or if you have your phone booted you can use the ADB command:
adb reboot-bootloader
Now use these fastboot commands:
fastboot oem rebootRUU
Should see the Silver HTC logo. Now issue this command to flash your phone using the ruu.zip file:
fastboot flash zip ruu.zip
Now the first time you issue a command to flash firmware/ruu in fastboot it only prepares the flash. You have to issue the exact command again:
fastboot flash zip ruu.zip
The green status bar usually does not reach the 100% mark. When the output in the command window is complete, you can reboot:
fastboot reboot
**Notes about the RUU.zip method. You still need to have the proper CID for the RUU. You can run the RUU.zip with super CID, but you will have to lock your bootloader first. If you are running the RUU.zip as base to downgrade all your firmware because you are going to then going to restore a stock Nandroid so the RUU might not be made for your MID, so you may need to edit the android-info.txt inside the ruu.zip to include your MID or CID.
if you have sucessfully did this you can see hboot 1.54
How to install ota butterfly s?
YOU HAVE TO BE ON STOCK RECOVERY,ROM AND S-off TO PERFORM THIS ACTION
1. Check ROM version in Settings-About-Software Information, it MUST match second value in example case 1.21.709.3-1.12.709.2, if you have version different from 1.12.709.2, update will FAIL.
2. Make sure that your device running system without any app/files modifications, otherwise update will FAIL.
3. Your device must be S-OFF AND/OR LOCKED or RELOCKED, being S-ON and UNLOCKED won’t allow you to apply OTA update.
4. Check your recovery, official OTA can be applied ONLY on Stock Recovery, TWRP/CWM/PhilzTouch and etc can’t be used.
5. Now we can copy out OTA package in system storage, I recommend to copy file in root of the Internal Storage but its not necessary.
6. Turn off device.
7. Press Power button and Volume down button, keep them until you see bootloader.
3. After that use volume down button to make a choice at Recovery option and press Power button. Device will reboot in Recovery mode.
4. When recovery starts, you will see red triangle, don’t worry nothing bad happened.
5. Wait for a while and press both Volume buttons and click Power button. This combination allows you to enter Recovery menu.
6. Using volume buttons, navigate to ”apply from phone storage” option and press Power button.
7. Now you can choose your OTA package. In our example it will be stored in data/media/0/OTA_DLXPLUS_U_JB_50_hTC_Asia_TW_1.21.709.3-1.12.709.2_release_333902.zip then press Power button.
8. During installation you might need to follow some instructions on screen. Reboot device when installation finishes.
9. After reboot you will get message that you successfully updated your device
10.If you have already modified you device to a point where no OS is showing in hboot the device will reboot several times.
11.If you want JB 4.3
with sense 5.5 just download it normally in system updates.
if download ota fail
Go to cwm in advance format every thing except external sd card
format system
format internal storage
etc
flash stock firmware
flash cwm recovery
flash stock rom
flash stock recovery
then flash ota
read above and below how to flash
How to install Rom butterfly s?
In order to install rom you will need CWM or Twrp I recommend CWM
1.Boot your HTC Butterfly S into bootloader mode by pressing Volume Down and Power at the same time when it boots up.
2.Connect your HTC Butterfly S to your PC using your micro USB cable.
3.Open a command prompt window in where you put recovery-clockwork-touch-6.0.3.4-dlxpul.img. Do this by going into the fastboot folder, hold down the shift key and right clicking. Once you’ve right clicked, the windows context menu will appear. Select the option ‘open command window here’. A command prompt window will then appear.
4.To flash the custom recovery, enter the command below into the command prompt window.
"fastboot flash recovery recovery-clockwork-touch-6.0.3.4-dlxpul.img"
How to Root butterfly s?
1.Dowload This
2.Put it in internal storage.
3.Reboot into recovery.
4.Use CWM to install zip from sd.
5.Select downloaded .zip.
6.that's it reboot and you are rooted.
How to install rom butterfly s?
1.Download above stock_dlxpul_1.21.709.3.zip or choose from this
2.Put it in internal storage.
3.Reboot into recovery.
4.Use CWM to install zip from sd.
5.Select downloaded .zip.
6.that's it reboot and you have new rom installed.
For more Guide go to This
Click to expand...
Click to collapse
In order to S-OFF, need to perform on stock htc rom? cause i run rumrunner, until pouring number 8 say need power off phone, pray and run again in 30 secs, try many times, same
help...

Updated Firmware, how to re unlock bootloader after locking it?

Have manually updated my HTC ONE M7 to FW 4.19.401.11 following these steps from the thread here, http://forum.xda-developers.com/showthread.php?t=2182823...
1. Re-lock your bootloader (this will most probably wipe content of your device)
2. Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
3. Re-name .zip file to firmware.zip
4. Open command prompt
5. Boot your device in fastboot mode (vol down + power ===> fastboot)
6. Connect device to the PC
7. In command prompt cd to fastboot.exe location
8. Make sure you have correct modeid and cidnum (type: fastboot getvar all)
9. Type: fastboot oem lock (if your device is not relocked yet)
10. Type: fastboot oem rebootRUU and wait for device to reboot
11. Type: fastboot flash zip firmware.zip and wait for process to complete
12. Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
13. Type: fastboot flash zip firmware.zip and wait for process to complete
14. Type: fastboot reboot
15. Unlock your bootloader and flash custom recovery if you are going to use custom ROM.
But now the phone doesnt appear to boot im able to get into bootloader by holding down the volume button, any ideas why i cant boot into the HTC ONE do i need to re unlock the boot loader? If so how do you re unlock the boot loader after relocking it please?
EDIT: Im guess the phone doesnt boot as i need to flash a custom ROM??....if so do i have to re unlock the bootloader first?

BlockABoots said:
Have manually updated my HTC ONE M7 to FW 4.19.401.11 following these steps from the thread here, http://forum.xda-developers.com/showthread.php?t=2182823...
1. Re-lock your bootloader (this will most probably wipe content of your device)
2. Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
3. Re-name .zip file to firmware.zip
4. Open command prompt
5. Boot your device in fastboot mode (vol down + power ===> fastboot)
6. Connect device to the PC
7. In command prompt cd to fastboot.exe location
8. Make sure you have correct modeid and cidnum (type: fastboot getvar all)
9. Type: fastboot oem lock (if your device is not relocked yet)
10. Type: fastboot oem rebootRUU and wait for device to reboot
11. Type: fastboot flash zip firmware.zip and wait for process to complete
12. Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
13. Type: fastboot flash zip firmware.zip and wait for process to complete
14. Type: fastboot reboot
15. Unlock your bootloader and flash custom recovery if you are going to use custom ROM.
But now the phone doesnt appear to boot im able to get into bootloader by holding down the volume button, any ideas why i cant boot into the HTC ONE do i need to re unlock the boot loader? If so how do you re unlock the boot loader after relocking it please?
EDIT: Im guess the phone doesnt boot as i need to flash a custom ROM??....if so do i have to re unlock the bootloader first?
Click to expand...
Click to collapse
try holding the power buttons until the home and back buttons flash, wait til they stop then press volume down, release the power button then release the volume down

grantymc said:
try holding the power buttons until the home and back buttons flash, wait til they stop then press volume down, release the power button then release the volume down
Click to expand...
Click to collapse
Ah that worked thanks!

Uproblem for unlock the relock HTC One
hi
I relocked my HTC One M7 by HTC Bootloader Unlock Application In Windows 8 & Then my phone not start and gone to fastboot mode!
I can not install any ROm or Unlock Again,PLZ help me ASAP...:crying:

Saeiddvc said:
hi
I relocked my HTC One M7 by HTC Bootloader Unlock Application In Windows 8 & Then my phone not start and gone to fastboot mode!
I can not install any ROm or Unlock Again,PLZ help me ASAP...:crying:
Click to expand...
Click to collapse
1- Why did you relocked your bootloader?
2- ''HTC Bootloader Unlock Application'' doesn't say much. I guess you are referring to a toolkit which is not recommended to use
3- Why can't you unlock again? Get your identifier token from fastboot en send it to htcdev. Then flash your unlock code bin file to unlock your phone again. Then youll be able to flash a recovery and a rom...

I CAN`T flash unlock code because my phone not connected to my pc until I relock this!!!!!

Saeiddvc said:
I CAN`T flash unlock code because my phone not connected to my pc until I relock this!!!!!
Click to expand...
Click to collapse
not sure what you are trying to say here mate.
your phone doesn't need to be unlocked to be able to ''connect it'' to your pc. You should be able to use fastboot from bootloader to
1- get your identifier token
2- flash the unlock_code.bin to unlock it again
if you can't 'communicate with the phone using fastboot in bootloader, your drivers are not installed correctly on your computer.
in windows device manager, it should be listed as ''My HTC'' if your drivers are ok.

alray said:
not sure what you are trying to say here mate.
your phone doesn't need to be unlocked to be able to ''connect it'' to your pc. You should be able to use fastboot from bootloader to
1- get your identifier token
2- flash the unlock_code.bin to unlock it again
if you can't 'communicate with the phone using fastboot in bootloader, your drivers are not installed correctly on your computer.
in windows device manager, it should be listed as ''My HTC'' if your drivers are ok.
Click to expand...
Click to collapse
thanks
I uninstalled HTC driver & restarted My PC the install it again so connect HTC ONE to my PC & unluck again