Related
please tell me how to enable usb on the go . i want to attached my pen drive and my hard drive to my phone .
plug it into the phone, and u're ready to go.. hence the name usb on the go
jinnn_1989 said:
please tell me how to enable usb on the go . i want to attached my pen drive and my hard drive to my phone .
Click to expand...
Click to collapse
You need a USB Host to go cable - they are pretty cheap off of ebay.
USB hard drives don't always work - at minimum you will need a powered hub.
- Frank
i know wht USB on the means but how do i enable it. i have tried connecting with a pendrive with the help of the USb on the cable but it does not show .
Once you plug your on the cable in the phone will inform you that usb connecter s connected. Whatever you plug in at the other end of otg cable work run unless it is not supported.
Sent from my SCH-I500 using Tapatalk
Just plug it in and look in My files. It will show as usbstorage.
I have an official samsung OTG cable, it works fine on the SGS2, but doesn't appear on the Galaxy Note under usbstorage.
Anyone else out there having similar problems?
i had grab some ebay OtG but after unmount and remove the OTG it causes wakelock which drain alot of juice.
I am also facing problems with OTG . when i plug in the cable thr is not msg nor anything happens in phone. please could any one tell me how to enable it may be with kernel or custom rom or may be anything else.
I also want to know this as well,I have spent considerable time yesterday trying to make this work but no luck at all,I would appreciate if someone could help,as I have seen a video in this forum where the guy was able to.connect a mouse to it stating that it is supported out of the box.
I was able to get it to work with a pendrive and a mouse with no problems, but I couldn't get a keyboard or my 2.5" external drive to mount.
Details:
My OTG cable was from DealExtreme for $2.30 or something.
My pendrive was FAT32 formatted.
My mouse was a basic $10 optical one.
My 2.5" external was NTFS, which probably goes some way to explaining why it didn't work even when I gave it some extra power from my desktop PC too.
My keyboard was a standard USB. I also tried a Logitech keyboard with a wireless USB dongle but that didn't work either.
I watched a whole film off my pendrive with no issues. I messed around with the mouse a bit, but the cursor moved too slowly for my taste and the scroll wheel didn't scroll webpages, which is half the reason I'd plug a mouse in anyway.
jinnn_1989 said:
I am also facing problems with OTG . when i plug in the cable thr is not msg nor anything happens in phone. please could any one tell me how to enable it may be with kernel or custom rom or may be anything else.
Click to expand...
Click to collapse
If you get no message when the cable is plugged in on it's own, chances are it is a problem with the cable. I bought a cable of Ebay which didn't work, so I bought a different one and that did.
Regards,
Dave
Hello!
Today I (Finally) received my USB OTG Y cable! I have the Samsung Galaxy S3 4G (I9305) and i bought the cable because the ebay site said it was for s3. I was really happy when i got it and plugged my usb memory stick into it. It all worked good. Then I plugged in the charger (to the female micro usb) and it didnt start charging. I wasn't happy anymore. Then i started to researh a little. I found out that my phone doesnt support USB host mode and charging at the same time ( ). So im just asking, is there a way to make my phone charge when i use the OTG cable without any hardware modifying? Can I just likes install a custom kernel that supports OTg charging? Or just make my phone think its docced when i use that cable (I thought that may work)?
Btw im running android 4.4.4 stock rom and stock kernel. Thanks for any help.
And here is a picture of the cable. Down there ⬇
Does anyone know of a way to have OTG and charging at the same time? I know you can use wireless charging and otg at the same time, I'd like to know if it can all be done through usb.
http://www.amazon.com/Micro-Cable-P...1453677269&sr=8-1&keywords=otg+charging+cable
I have that exact cable. It only Powers the peripheral device. From what I can gather it's a software thing with the gs6, but I have such a small understanding of this kind of stuff.
It should be possible, I believe they had a docking station with a USB port that worked the way you're thinking
se1000 said:
It should be possible, I believe they had a docking station with a USB port that worked the way you're thinking
Click to expand...
Click to collapse
For the galaxy s6?
hueye1 said:
For the galaxy s6?
Click to expand...
Click to collapse
It was for the S4, but the reason it shouldn't work for the S6 is that the S6 no longer uses the micro-usb/MDL plug. Just saying that it should be possible to power the phone and do OTG
http://www.amazon.com/Samsung-Galax...words=samsung+galaxy+smart+multimedia+docking
anyone knows if Marshmallow Android 6 new kernel supports charge phone over OTG cable for Galaxy S6 Edge?
Lava OTG charger, 40 bucks and works a couple times. Lol I'm seriously about ready to throw all my devices.
I bought this cable: http://www.amazon.com/Micro-Cable-Player-Samsung-Galaxy/dp/B00CXAC1ZW/ref=sr_1_1?ie=UTF8&qid=1453677269&sr=8-1&keywords=otg+charging+cable and it works fine with my friends Windows Phone, i.e harddrive connects and the phone charges, but on my S6 it doesn't charge at all. Is this a wiring issue with the S6 or some software restriction?
Ev0s said:
I bought this cable: xxx and it works fine with my friends Windows Phone, i.e harddrive connects and the phone charges, but on my S6 it doesn't charge at all. Is this a wiring issue with the S6 or some software restriction?
Click to expand...
Click to collapse
did you ever find a solution - having same problem OTG cable working on other android devices but not my T-mobile S6 with broken touch screen
I know I'm late on this, but I have an S6 around and I'm trying to make other uses out of it, however I have struggled with this with everything I've done.
I haven't solved this, but today I came with an idea that may help some people, at least it seems it will work for me.
Ok, we cannot charge through the usb while using OTG, but we can charge through wireless and use OTG at the same time.
I have tested this with a cheap wireless base and I have plugged to the OTG first a powered usb hub and of course the phone was charging without problems. Then removed the hub and plugged a USB micro SD reader with a card directly to the OTG cable, it also continued to charge, it has charged to 100% with that plugged on.
Hope it helps.
Regards.
Hello .... I'm curious if this tablet can be open up and have the memory removed, only to upgrade it to a higher level, is it possible ? Oh yeah and I know need it to be with one usb end and not a very long cable . Thanks
Dude905 said:
Hello .... I'm curious if this tablet can be open up and have the memory removed, only to upgrade it to a higher level, is it possible ? Thanks
Click to expand...
Click to collapse
It's probably possible, but it wouldn't work.
Take a look:
https://www.youtube.com/watch?v=0nqY2EXTHhE
Do some reading here:
http://forums.webosnation.com/hp-touchpad/331349-2gb-ram-upgrade-touchpad-attempt.html
In my opinion everything is possible with the right "CODE" and that is attached to a human memory with very smart neurons!
From what I saw there I'm assuming that the memory hard drive or card GB is internal to the board ? I want to replace the 32GB with a 64 GB card or whatever these HP tablets have . I don't want to get into un-soldering and soldering though .... Thanks
Dude905 said:
From what I saw there I'm assuming that the memory hard drive or card GB is internal to the board ? I want to replace the 32GB with a 64 GB card or whatever these HP tablets have . I don't want to get into un-soldering and soldering though .... Thanks
Click to expand...
Click to collapse
Everything is integrated. If you want to expand storage you can use an OTG Micro USB HUB an attached a USB 64GB flash drive, it will be bulky but works!
HP_TOUCHPAD said:
Everything is integrated. If you want to expand storage you can use an OTG Micro USB HUB an attached a USB 64GB flash drive, it will be bulky but works!
Click to expand...
Click to collapse
That would work ? that would be great if it can . I would like to place movies onto the usb flash drive and play off it, So you saying it can work ? Thanks
Of course it works, you can play movies directly from the USB flash drive. You will need to supply power to the USB drive, connected by wire or using a Power Bank.
https://www.amazon.com/Adaptor-Powered-Charging-Charger-Connector/dp/B00LTHBCNM/ref=sr_1_9?ie=UTF8&qid=1486006080&sr=8-9&keywords=OTG+micro+usb+hub
If you want to make it portable:
https://www.amazon.com/2600mAh-Portable-External-Battery-Charger/dp/B01N5O3OX3/ref=sr_1_10?
Hello .... I'm curious if this tablet can be open up and have the memory removed, only to upgrade it to a higher level, is it possible ? Oh yeah and I only need it to be with one usb end and not a very long cable . Thanks
Is a Micro USB Port, is the same as your charger. The one that you connect to your Tablet. Search and do some reading on how it works, is very simple but you have to understand how all comes together, there is information on this site also.
Once you have Android install on your tablet, it works the same as others Android or Tablet Devices.
I finally got a OTG Micro USB straight cable, usb on one end and micro on the other, try it out and nothing happens, is there a setting with the tablet that needs to be turn on or off ? thanks
What version of Android are you using? or the type or ROM?
HP_TOUCHPAD said:
What version of Android are you using? or the type or ROM?
Click to expand...
Click to collapse
Its ......Kitkat .... Android 5.1.1 version and cm-11-20161219-NIGHTLY-MLQ-tenderloin .... This is very stable ... Thanks
The ROM that you are using is from the Developer Milaq.
I installed the latest Nightly dated December 26 of 2016, of the ROM you are using.
https://milaq.net/downloads/tenderloin/cm-11.0/
After a fresh installed I connected the OTG Micro USB HUB, then connected the HP Touchpad cord charger to the OTG and finally the USB flash drive ( SanDisk Cruzer Glide 16GB). You will noticed that the USB flash indication light starts flashing and a notification on the Left top side on Android tells you ( USB Storage in USE ). Then you go to the File Manager and you will see USB Storage, when you touch it you will see all the files on the USB flash drive and you can play your movies directly from there at the same speed as if were on the internal storage. When you are done, go to setting and storage and eject the USB Flash drive. Is very simple!
HP_TOUCHPAD said:
The ROM that you are using is from the Developer Milaq.
I installed the latest Nightly dated December 26 of 2016, of the ROM you are using.
https://milaq.net/downloads/tenderloin/cm-11.0/
After a fresh installed I connected the OTG Micro USB HUB, then connected the HP Touchpad cord charger to the OTG and finally the USB flash drive ( SanDisk Cruzer Glide 16GB). You will noticed that the USB flash indication light starts flashing and a notification on the Left top side on Android tells you ( USB Storage in USE ). Then you go to the File Manager and you will see USB Storage, when you touch it you will see all the files on the USB flash drive and you can play your movies directly from there at the same speed as if were on the internal storage. When you are done, go to setting and storage and eject the USB Flash drive. Is very simple!
Click to expand...
Click to collapse
I don't see nothing since nothing happens once I connect it, though if I use the cable to connect to my computer I am able to see the tablet internal drive, but not to a flash drive from tablet to flash . This is why I was asking what's exact cable type for this tablet port . I'm thinking it isn't the correct one . There so many different sizes out there. Thanks for your suggestion, much appreciated
I sent you the link to Amazon of the OTG.
Did you take the time to learn what OTG is?
HP_TOUCHPAD said:
I sent you the link to Amazon of the OTG.
Did you take the time to learn what OTG is?
Click to expand...
Click to collapse
Yes, I did view it but the type that goes into the tablet isn't listed . I bought one already that I assume is the correct size but with these micro usb connectors there is many different types, do you understand what I'm trying to say . Pic below is what I'm using
Code:
https://s23.postimg.org/osksn2wrv/IMG_20170208_141448.jpg
Dude905 said:
Yes, I did view it but the type that goes into the tablet isn't listed . I bought one already that I assume is the correct size but with these micro usb connectors there is many different types, do you understand what I'm trying to say . Pic below is what I'm using
Code:
https://s23.postimg.org/osksn2wrv/IMG_20170208_141448.jpg
Click to expand...
Click to collapse
All the information is on this web site:
https://forum.xda-developers.com/showthread.php?t=1582771
And for the second time this is the OTG cable that I have, which I posted the link : https://www.amazon.com/Adaptor-Powered-Charging-Charger-Connector/dp/B00LTHBCNM/ref=sr_1_31?ie=UTF8&qid=1486568545&sr=8-31&keywords=micro+usb+otg If you look at the specification of how it works it tells you is a "Micro Usb HUB Adaptor with Power Powered"
The HP touchpad or old devices do not offer power to the micro usb port, you need a Y adapter one to supply power to the USB flash drive and the other one for data.
That is why I said, do some research to understand the connection, which it clearly shows on the Amazon product.
Oh ok now I got you it also needs power to make it work, the tablet alone isn't good enough . See, I was hoping just a simple connector going into the tablet Micro and have on the other end usb female connector were by I could plug in a flash stick without power needed . Thanks for all your help
Dude905 said:
Oh ok now I got you it also needs power to make it work, the tablet alone isn't good enough . See, I was hoping just a simple connector going into the tablet Micro and have on the other end usb female connector were by I could plug in a flash stick without power needed . Thanks for all your help
Click to expand...
Click to collapse
That will work with devices that allow power out from the charging port. The work around for old devices is the Y connector, with the connector I posted you can use a USB Keyboard, a USB mouse and a USB flash drive all at once, turning a tablet into a regular desktop PC. Like I posted your ROM will work and you can play movies directly from the USB drive with no loss in performance, with only your basic ROM nothing else is need it.
You are very welcome and have fun!
HP_TOUCHPAD said:
That will work with devices that allow power out from the charging port. The work around for old devices is the Y connector, with the connector I posted you can use a USB Keyboard, a USB mouse and a USB flash drive all at once, turning a tablet into a regular desktop PC. Like I posted your ROM will work and you can play movies directly from the USB drive with no loss in performance, with only your basic ROM nothing else is need it.
You are very welcome and have fun!
Click to expand...
Click to collapse
Yeah, those devises sound really good . I might just get one for that fact alone .... Though, it isn't really what I needed
I haven't used my TouchPad for a few years, and I wanted to give it another try. Unfortunately I have misplaced the original cable that came with the unit. For charging purposes I'm okay, since I have a dock, but now that I wanted to possibly upgrade OS, I can't do anything without the original cable. Tried a few regular USB to micro USB cable, and none work. The computer (I tried Mac and Windows) does not see TouchPad connected.
Would like to upgrade from Cyanogen 4.1.2 to at least 4.4.4, or maybe Nougat, but without the original cable, looks like it's impossible.
Any idea where to get a replacement cable? Amazon has a few options (not too many), but I'm not sure if those would work. Some reviews are saying that charging works fine, but I'm not sure about the data transfer.
Any help is much appreciated.
You should be able to use any kind of Micro USB cable that has a big thicker width. Especially the really short ones won't work because they don't contain the correct connectors. You should just head to the store and a cable that you've got from them should work, but I doubt you would need one if you have a working cable. You have not explained what kind of modes you've tried, what you were even doing
Have you tried
1. Installing novacom driver? (Assuming you are wanting to mod)
2. Changing file transfer to transfer data (MTP)?
Thank you for the reply.
Yes, I was trying to upgrade to Lineage11 build and install Kitkat 4.4.4, with the idea to possibly upgrade it later to Android 7 Nougat. Right now I have Cyanogen 4.1.2, which I've installed a few years ago, but haven't used my TouchPad for quite a while. So, at first I had to recharge the battery which was completely discharged. I still have the original charger, but the USB cable I had didn't do a thing. The tablet was giving me a warning to use the original cable, which I don't have anymore (can't find it). I left the USB cable plugged in for 2-3 hours, and got no signs of life from the tablet. Then I remembered I had the charging dock somewhere, I luckily found it, and after only about 10-15 minutes, the tablet was back to life and started to charge.
The next day, I wanted to proceed with the upgrade. I still have WebOS installed, but this time I wanted to get rid of it. I installed Novacom driver and Toolbox v42. However, after putting the TP into WebOS recovery mode and plugging the USB cable between the computer and the tablet, I was getting the message that the connection to the TP cannot be established. I tried it on Windows 10, but also on a MacBook. Nothing worked. That's why I'm suspecting there is something wrong with the cable. It did not charge the tablet initially, and then it failed to transfer data. Since I have no idea where my original USB cable, that came with the tablet is, I ordered a new cable from Amazon. Just a regular Micro USB cable. It should arrive in a few days, and I hope it will work.
Thanks again for replying, and I'll let you know what happens when I get the cable.
I am still waiting for the new cable from Amazon. It will take another day or two, but now I really wonder if the cable I already have is bad. I just used it to successfully charge a couple of headphones. It worked just fine. But when I try to use it on my TP, no data transfer is possible, and as I said before it won't charge the tablet either. Really concerned that the new Amazon cable will do the same, which means - nothing. Quite confused, to say the least.
Sorry to bother you again folks, but this thing is driving me crazy. I don't know if it is cable related or not, but apparently I cannot install tptoolbox_v42.
Working in Windows 10, and after successfully installing Novacom driver, when I double click on the tptb_v42_win.bat file, the message I am getting is that the connection to TP cannot be established.
Then I tried running the same bat file as administrator. Now the message is that it cannot find TPToolbox-2015-01-08-v42.bin file. That binary file is sitting in the very same folder, as the executable.
What am I doing wrong? Or is it the cable?
Thanks!
DR4 said:
What am I doing wrong? Or is it the cable?
Thanks!
Click to expand...
Click to collapse
The cable must provide data and charging, if the cable is charging the other phones properly then the cables is only to charge the phone and does not provide data.
The Toolbox can only be use to install an specific Android ROM and Recovery, it will not flash any other ROM version.
HP_TOUCHPAD said:
The cable must provide data and charging
Click to expand...
Click to collapse
That has to be the problem with the cable I was using. The one I'm expecting to arrive from Amazon today is a charge/data cable. It should work...I hope.
Yup, it was the cable. Obviously what I had was a charging only cable. Just got a package from Amazon, tried the cable right away, and it works like a charm (charge and data).
Thank you, djared704 and HP_TOUCHPAD