Related
PLEASE READ: This will only work on a stock, signed S-OFF HBOOT. Do not try this on a patched or ENG HBOOT or the result will be a permanent hard brick.
1. Boot into fastboot on your device
2. Open a terminal or command prompt and navigate to where your fastboot binary is.
3. Type the following commands:
Code:
fastboot devices
Ensure your device is listed
_________________________________
Code:
fastboot oem readsecureflag
The output should read something like: secure_flag: 0
_________________________________
Code:
fastboot oem writesecureflag 3
_________________________________
Last:
Code:
fastboot reboot bootloader
Verify that your device is now S-ON
Thanks to Blue6IX for original tutorial
Thanks for this man, I was wondering when someone would come up with this. People will need it to fully return to stock.
Sent from my HTC PH39100 using xda premium
Thanks bud. Logic would suggest you could enter 0 to give s off inplace of 3 to return to s on.
Sent from my HTC Velocity 4G using XDA Premium App
78cortina said:
Thanks bud. Logic would suggest you could enter 0 to give s off inplace of 3 to return to s on.
Sent from my HTC Velocity 4G using XDA Premium App
Click to expand...
Click to collapse
No that will not work, you will have to run the S-Off tool again to regain it.
Awesome thank you
Sent from my HTC PH39100 using XDA
hey cruzin long time, how u been?
do you know if this will return you to a "LOCKED" stated instead of RELOCKED?
lebmb said:
hey cruzin long time, how u been?
do you know if this will return you to a "LOCKED" stated instead of RELOCKED?
Click to expand...
Click to collapse
I tried it... can confirm that u first what I did was lock bootlader run stock rom like ruu and then do these steps.... It will say locked and s on
Sent from my HTC PH39100 using XDA
Marshmellow92 said:
I tried it... can confirm that u first what I did was lock bootlader run stock rom like ruu and then do these steps.... It will say locked and s on
Sent from my HTC PH39100 using XDA
Click to expand...
Click to collapse
that's what i thought
thanks
Just clarifying something, so this will or will NOT work for the ics hboot posted on the s-off site by juopunutbear?
slapshot30 said:
Just clarifying something, so this will or will NOT work for the ics hboot posted on the s-off site by juopunutbear?
Click to expand...
Click to collapse
It will, just as long as you chose the non-patched hboot without fastboot commands.
Just had to use this method.
Used the PH39IMG to get back to a stock hboot and ran the commands. Confirmed that it does display locked in hboot.
Unlocked, reflashed recovery.. and I am good to go s-on
Sent from my HTC PH39100 using XDA
Where can I find the steps on flashing the PH39IMG to get back stock hboot ?
dynamiclynk said:
Where can I find the steps on flashing the PH39IMG to get back stock hboot ?
Click to expand...
Click to collapse
Superuser guide opt 6
http://forum.xda-developers.com/showthread.php?t=1416836
Just FYI it reboots once during the process let it do it's thing don't interrupt it.
esloan said:
Superuser guide opt 6
http://forum.xda-developers.com/showthread.php?t=1416836
Just FYI it reboots once during the process let it do it's thing don't interrupt it.
Click to expand...
Click to collapse
Thanks!
Yeah seems the
SECOND OPTION (PH39IMG.zip flash) <-- link dead
So can I do OPTION ONE and download the correct RUU and do the same or does the PH39IMG.zip have something the RUU does not ?
dynamiclynk said:
Thanks!
Yeah seems the
SECOND OPTION (PH39IMG.zip flash) <-- link dead
So can I do OPTION ONE and download the correct RUU and do the same or does the PH39IMG.zip have something the RUU does not ?
Click to expand...
Click to collapse
The RUU will do the trick.
Sent from my HTC Holiday using xda premium
Curious. Could you write the secureflag to 0?
Sent from my HTC PH39100 using XDA
mibikin said:
Curious. Could you write the secureflag to 0?
Sent from my HTC PH39100 using XDA
Click to expand...
Click to collapse
Nope ,
Sent from my HTC PH39100 using XDA
after i say
fastboot oem readsecureflag
The output is : secure_flag: 3
can i proceed to safety or killing the phone?
i did a s off through HTC by the way
Marshmellow92 said:
I tried it... can confirm that u first what I did was lock bootlader run stock rom like ruu and then do these steps.... It will say locked and s on
Sent from my HTC PH39100 using XDA
Click to expand...
Click to collapse
So for all intents and purposes, it will look like it was never HTC Unlocked then? My g/f has a Vivid, and she's very picky about going to the darkside of rooting, because she doesn't want her warranty voided. If it can look like it's been returned to stock, that would help.
I cant get it to say ***LOCKED*** I locked hboot, ran GB RUU, ran ICS RUU, followed your steps, fastboot oem readsecureflag
Output is : secure_flag: 3
***RELOCKED***
S-ON
Did I do something wrong?
Ok so I unlocked the bootloader and I was s-on, I tried to do the wire trick and messed it so I have to do a RUU, now I have a locked bootloader but I'm s-off? And when I go into recovery I'm in the joupterbear screen and that's all, and sugestions on why I should do next?
Sent from my HTC PH39100 using xda app-developers app
cwa542 said:
Ok so I unlocked the bootloader and I was s-on, I tried to do the wire trick and messed it so I have to do a RUU, now I have a locked bootloader but I'm s-off? And when I go into recovery I'm in the joupterbear screen and that's all, and sugestions on why I should do next?
Sent from my HTC PH39100 using xda app-developers app
Click to expand...
Click to collapse
Did you flash a recovery?
i am running pacman but i want to go back to stock ruu but everytime i try to install ruu from pc it fails
i have unlocked my bootloader but i am s on
Sent from my Incredible S using XDA Premium HD app
JELLYZ said:
i am running pacman but i want to go back to stock ruu but everytime i try to install ruu from pc it fails
i have unlocked my bootloader but i am s on
Sent from my Incredible S using XDA Premium HD app
Click to expand...
Click to collapse
You will need to relock your bootloader in order to install an official RUU.
but on my other phone i have s off and unlocked and i can install ruu no errors
Sent from my Incredible S using XDA Premium HD app
10x for your wrong advice my device is bricked and i cant unlock my phone
Sent from my Incredible S using XDA Premium HD app
JELLYZ said:
but on my other phone i have s off and unlocked and i can install ruu no errors
Sent from my Incredible S using XDA Premium HD app
Click to expand...
Click to collapse
I also have a true S-OFF IncS (via XTC clip), but with HBOOT 2.0x, I still had to relock the bootloader if I wanted to run an official RUU despite having S-OFF. S-OFF did allow me to flash any RUU without the need for a goldcard, but if I didn't relock the bootloader, the RUU would throw a 155 error, so I am speaking from personal experience.
tpbklake said:
I also have a true S-OFF IncS (via XTC clip), but with HBOOT 2.0x, I still had to relock the bootloader if I wanted to run an official RUU despite having S-OFF. S-OFF did allow me to flash any RUU without the need for a goldcard, but if I didn't relock the bootloader, the RUU would throw a 155 error, so I am speaking from personal experience.
Click to expand...
Click to collapse
Yea i experienced this as well.
Sent from one of the few remaining Incredible S'
fixed
Sent from my Incredible S using XDA Premium HD app
Like mine when downgrade to gingerbread i just relock and run the ruu
Sent from my HTC Incredible S using xda premium
HI to all,
After putting my HTC one in S-off and have changed my CID VODAP405 to HTC__405 and set ./revone -r to lock the phone...,
I've always seen the writing RELOCKED in place of LOCKED on my Bootloader... Even using the ruu file does not change the words LOCKED...
And for this reason I thought and test to change this diciture on hboot_signedbyaa.img v1.44.0000 of v1.29.401.12 OTA file....
The diciture is at offset 000ee7e4/5 of hboot file.. and you can change 52 45 to 00 00 or cut this two locations and save hboot file and flash...
Does anyone else know if there is a command to do the same thing without changing the file hboot img?
Best Regards and pardon my bad english :fingers-crossed:
You can also use ./revone -l
Which also turns the status to locked..
You will still have S-OFF so... can still flash anythign you want
Why do you have this posted in the android development forum?
Sent from my HTC One using Tapatalk 4 Beta
What is the difference between having it say locked etc....in bootloader.
Sent from my HTC One using xda app-developers app
Deltafox79 said:
HI to all,
After putting my HTC one in S-off and have changed my CID VODAP405 to HTC__405 and set ./revone -r to lock the phone...,
I've always seen the writing RELOCKED in place of LOCKED on my Bootloader... Even using the ruu file does not change the words LOCKED...
And for this reason I thought and test to change this diciture on hboot_signedbyaa.img v1.44.0000 of v1.29.401.12 OTA file....
The diciture is at offset 000ee7e4/5 of hboot file.. and you can change 52 45 to 00 00 or cut this two locations and save hboot file and flash...
Does anyone else know if there is a command to do the same thing without changing the file hboot img?
Best Regards and pardon my bad english :fingers-crossed:
Click to expand...
Click to collapse
if you want it to say locked don't run ./revone -r that will relock. you need to ./revone -l
Anyone say because after relock the htc one whit ./revone s 3 - l or ./revone -r the command :
fastboot flash unlocktoken Unlock_code.bin
Not unlocked my htc ? I say always Locked or ReLocked??
Regards
Oh god why. Please don't start hex editing hboots there's going to be a ten fold increase in hard bricks now because of s off. Someone should make a Do Not list for s off
Sent from my Tricked out HTC One
Yes you have right but I don't understand because
fastboot flash unlocktoken Unlock_code.bin
Not work plus.. after S-off whit revone also if II select yes phone restart but always locked.. Why??
Regards
Deltafox79 said:
Yes you have right but I don't understand because
fastboot flash unlocktoken Unlock_code.bin
Not work plus.. after S-off whit revone also if II select yes phone restart but always locked.. Why??
Regards
Click to expand...
Click to collapse
You need a new unlock token from htcdev
Deleted
dazbutler1 said:
You need a new unlock token from htcdev
Click to expand...
Click to collapse
Yes I have require two time on htcdev but noting.. mah... :cyclops:
For Now Whit ./revone -s 3 -l after change my cid I see : *** LOCKED *** and S-On Again..
Regards
Can anyone tell me what does having S-OFF and SuperCID but locked bootloader means?
Personally i need S-Off Only for change My brand CID whit NObrand Cid
and return to S-on and LOCKED after this change
because I use STOCK ROM and Wait for OTA UPGRADE when avaiable.. no need unloked bootloader only for this reason...
Regards
Deltafox79 said:
Personally i need S-Off Only for change My brand CID whit NObrand Cid
and return to S-on and LOCKED after this change
because I use STOCK ROM and Wait for OTA UPGRADE when avaiable.. no need unloked bootloader only for this reason...
Regards
Click to expand...
Click to collapse
I want a nexus experience.
So, after making SuperCID I can S-ON and keep bootloader unlocked is it?
how to return locked and s-on，I am unlocked and s-on now
Sent from my HTC One using Tapatalk 2
---------- Post added at 12:27 PM ---------- Previous post was at 12:26 PM ----------
Deltafox79 said:
Personally i need S-Off Only for change My brand CID whit NObrand Cid
and return to S-on and LOCKED after this change
because I use STOCK ROM and Wait for OTA UPGRADE when avaiable.. no need unloked bootloader only for this reason...
Regards
Click to expand...
Click to collapse
how to return locked and s-on，I am unlocked and s-on now
Sent from my HTC One using Tapatalk 2
dingnangen said:
how to return locked and s-on，I am unlocked and s-on now
Sent from my HTC One using Tapatalk 2
---------- Post added at 12:27 PM ---------- Previous post was at 12:26 PM ----------
how to return locked and s-on，I am unlocked and s-on now
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
./revone_0.2.1 -l
Regards
Inviato dal mio iPad con Tapatalk HD
Deltafox79 said:
./revone_0.2.1 -l
Regards
Inviato dal mio iPad con Tapatalk HD
Click to expand...
Click to collapse
need I s-off then use revone_0.2.1 -l？
Sent from my HTC One using Tapatalk 2
dingnangen said:
need I s-off then use revone_0.2.1 -l？
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Actually you might not need soff to use revone. Just push it to the media/local/tmp folder, then in that directory on a terminal emulator type chmod 755 revone
Then ./revone -l I believe
http://forum.xda-developers.com/showthread.php?t=2314582
Just don't do the one that does soff
Sent from my HTC One using xda premium
Android The Greek said:
Actually you might not need soff to use revone. Just push it to the media/local/tmp folder, then in that directory on a terminal emulator type chmod 755 revone
Then ./revone -l I believe
http://forum.xda-developers.com/showthread.php?t=2314582
Just don't do the one that does soff
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
it's that impossible that change soff to son
Sent from my HTC One using Tapatalk 2
dingnangen said:
it's that impossible that change soff to son
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Not sure what your saying
Sent from my HTC One using xda premium
I was wondering if it is possible to undo moonshine?
Sent from my HTCONE using xda app-developers app
flimsy888 said:
I was wondering if it is possible to undo moonshine?
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
I'm pretty sure you'd have to RUU. Not totally sure though....
Yes it is I've done it several times, do you won't to s-on? And return back to stock ? With hboot saying locked?
Sent from my HTCONE using xda app-developers app
-Cupper- said:
I'm pretty sure you'd have to RUU. Not totally sure though....
Click to expand...
Click to collapse
Running RUUs do not affect S-Off status.
Don't know if this is what you are trying to accomplish, don't believe it undoes anything, but might make it look stock, think there was another thread around somewhere, did not really read the thread.
http://forum.xda-developers.com/showthread.php?p=42332512
[HBOOT] Hex Edited Stock 1.44.000 hboot (1.29.651.10)
Sent from Taptalk on HTC One on some awesome custom Rom!
You can always go back to s-on with the fastboot oem write secureflag3 command.
I am note sure if thats the exact flag number so find out first before running it.
raptoro07 said:
Running RUUs do not affect S-Off status.
Click to expand...
Click to collapse
Isn't one of the benefits of s-off being able to Ruu while being unlocked still? ¿
Sent from my One using xda premium
Do NOT run the secureflag 3 command to s-on. You will brick the phone. You need to run the ruu first so you have a stock, SIGNED hboot first. After the ruu is complete then go into fastboot and run
fastboot oem writesecureflag 3
if you do it with the moonshine hboot on the phone it will never turn on again.
18th.abn said:
Do NOT run the secureflag 3 command to s-on. You will brick the phone. You need to run the ruu first so you have a stock, SIGNED hboot first. After the ruu is complete then go into fastboot and run
fastboot oem writesecureflag 3
if you do it with the moonshine hboot on the phone it will never turn on again.
Click to expand...
Click to collapse
This is correct. You never want to writesecureflag with an unsigned hboot.
@mhsbrian That is what I said. Running an RUU doesn't affect your S-Off. You can run RUUs for different devices with S-Off if you tried. (but I wouldn't)
raptoro07 said:
This is correct. You never want to writesecureflag with an unsigned hboot.
@mhsbrian That is what I said. Running an RUU doesn't affect your S-Off. You can run RUUs for different devices with S-Off if you tried. (but I wouldn't)
Click to expand...
Click to collapse
You didn't understand what I was saying. I'm saying in order to run a Ruu normally you have to relock the bootloader first before you can run it. With s-off, you can just Ruu without relocking I already understand that soff isn't affected by Ruu.
Sent from my One using xda premium
You can run the plug in eg1212 made for this phone and change moonshine hboot to read whatever you want.
Sent from my HTC6435LVW using xda premium
mhsbrian said:
You didn't understand what I was saying. I'm saying in order to run a Ruu normally you have to relock the bootloader first before you can run it. With s-off, you can just Ruu without relocking I already understand that soff isn't affected by Ruu.
Sent from my One using xda premium
Click to expand...
Click to collapse
What you need to do is, relock bootloader, run lastest RUU, unlock bootloader, s-off with revone (even tho you still are s-off), s-on with revone reboot into bootloader run writesecureflag 3, reboot to system, then reboot to bootloader and then run RUU one more time and bam you got locked bootloader again (not relocked)
Sent from my HTCONE using xda app-developers app