a) coming from a rooted GB-ROM:
- download Abyss Kernel 4.2 from here: http://www.mediafire.com/?c65mndvpk6ocbaa
- put zip-file on your USB-storage
- boot in Recovery
- Flash Abyss Kernel 4.2!!!
- boot back in recovery (you find this option under 'advanced')
- FullWipe
- Flash ROM
- reboot system
- ...you are done
==> there have been reported problems with a constantly rebooting system when doing installation coming from a GB-ROM as posted above! So the safe and 100% successful way is installing LPY Stock-ROM, root Stock ROM and then go on as described below under point b2). Do not ask for a tutorial on how to install and root LPY Stock ROM....it is describe enough here in Forum!
Click to expand...
Click to collapse
I would like to flash Charck's ICS XXLPY V4 because of simple ROM.
But I do not understand "Fullwipe" in the instruction.
Is there the exact menu "Fullwipe" after flashing Abyss Kernel4.2?
Or I have to click all wipe menu? (there are two wipe menu...)
And I would like to try to flash this ROM without the installation of LPY Stock-ROM.
Is there anyone who succeed this way?
rapboy75 said:
I would like to flash Charck's ICS XXLPY V4 because of simple ROM.
But I do not understand "Fullwipe" in the instruction.
Is there the exact menu "Fullwipe" after flashing Abyss Kernel4.2?
Or I have to click all wipe menu? (there are two wipe menu...)
And I would like to try to flash this ROM without the installation of LPY Stock-ROM.
Is there anyone who succeed this way?
Click to expand...
Click to collapse
Full wipe = data/factory reset + wipe cache + wipe dalvik cache (in advanced).
Already Rooted
gee2012 said:
Full wipe = data/factory reset + wipe cache + wipe dalvik cache (in advanced).
Are you allready rooted or not?
Click to expand...
Click to collapse
Thanks for your advice!!!
My phone is already rooted now. and also I already installed Abyss Kernel 4.2, too.
I just confused if "FullWipe" is one of the exact menu or meaning of wiping menus.
I will give a try right away!
rapboy75 said:
Thanks for your advice!!!
My phone is already rooted now. and also I already installed Abyss Kernel 4.2, too.
I just confused if "FullWipe" is one of the exact menu or meaning of wiping menus.
I will give a try right away!
Click to expand...
Click to collapse
"FullWipe" is not one of the exact menu. Go to wiping menus, you need to do all three separately: wipe data/factory reset, wipe cache, then wipe dalvik cache.
rapboy75 said:
I would like to flash Charck's ICS XXLPY V4 because of simple ROM.
But I do not understand "Fullwipe" in the instruction.
Is there the exact menu "Fullwipe" after flashing Abyss Kernel4.2?
Or I have to click all wipe menu? (there are two wipe menu...)
And I would like to try to flash this ROM without the installation of LPY Stock-ROM.
Is there anyone who succeed this way?
Click to expand...
Click to collapse
i can't flash Abyss Kernel4.2 i don't know what happen to my SGN it was Working Good And When i Try To Flash Rocket Rom v7 ICS i want to make full wipe i try to install Abyss Kernel4.2 but when i reboot my phone i found clock work mode v5.8.1.8 i don't know what happens i try to flash my mobile using pc odin done and when i try to flash abyss i can't i don't know why can anyone help me plz
mhmoud2000 said:
i can't flash Abyss Kernel4.2 i don't know what happen to my SGN it was Working Good And When i Try To Flash Rocket Rom v7 ICS i want to make full wipe i try to install Abyss Kernel4.2 but when i reboot my phone i found clock work mode v5.8.1.8 i don't know what happens i try to flash my mobile using pc odin done and when i try to flash abyss i can't i don't know why can anyone help me plz
Click to expand...
Click to collapse
Hi,after flash abyss kernel pls go to advanced.menu and reboot recovery.hope this help.
Sent from my GT-N7000 using xda premium
If you can get into recovery
1: Flash abyss kernel from SD card
2: Press go back>advanced>reboot in recovery
3: Wipe data
4: Wipe cache
5: Goto advanced and wipe dalvik cache
6: Install the rom (eg rocket rom) from SD card
7: Press go back and reboot device
maionline said:
If you can get into recovery
1: Flash abyss kernel from SD card
2: Press go back>advanced>reboot in recovery
3: Wipe data
4: Wipe cache
5: Goto advanced and wipe dalvik cache
6: Install the rom (eg rocket rom) from SD card
7: Press go back and reboot device
Click to expand...
Click to collapse
i can't flash any custom rom
i try to flash abyss using kernel LQ2 but when i try my device load for like 5 min and then reboot without flashing i don't know what i can do i need someone online to told me what i can do exactly plz xda users help me i make something wrong with my mobile my email [email protected] i need someone to be with me step by step plz all
with LQ2 Kernel i can flash anything the device load for 5 min and then reboot without doing anything
i will try to back to GB rooted stock Rom using pc odin
i got error when i try to update throuhg recovery E:signature verification failed
Is it safe to backup and restore roms using abyss kernel?
Related
I have to post here because I can't post in the direct thread.
http://forum.xda-developers.com/showthread.php?t=1510940
How do I actually install this? I've flashed ROMs before and I assume I can flash this one through CWM but it doesn't say what base OS you need to have running on the phone in order to flash it.
What rom are you currently running? If you are running one of the ics asop roms then I think you are good to go
Sent from my GT-I9000 using xda premium
Hi Guys
DarkKnights Author Recommend
Installation:
1. DOWNLOAD ZIP
2. WIPE DATA/FACTORY RESET.
3. WIPE CACHE PARTITION.
4. FLASH AND THEN REBOOT.
Click to expand...
Click to collapse
I Suggest if you come from Stock ROM
Flash a Kernel with CWM (CF-ROOT kernel with Addon, my Favorite) with Odin/Heimdall
Boot into CWM Recovery Mode
WIPE DATA/FACTORY RESET
WIPE CACHE PARTITION
Flash latest CyanogenMod (be sure, you do it with full version)
Boot into CWM Recovery Mode
WIPE DATA/FACTORY RESET
WIPE CACHE PARTITION
Flash the DarkKnight ICS
Have Fun !
I know it isn't the Best Way, but it surely will do if you like that !
Don't forget to thanks [if it useful was for you]
_______________
I was more asking which ROM to come from.
I ended up flashing 2.3.5 JVT and then this over the top of Semaphore kernel.
Just to make sure that I dont brick my note.
Im currently on costume ics rom. Ive tried several but they are very unstable and I have a feeling its bcuz Im flashing non wipe over other ics roms.
I would like to install a ics costume rom but do full wipe first.
Is it correct that if I flash my kernel to abyss 4.2, then I can do full wipe and install an ics costume rom without messing my note?
Ps: sorry if its been answered before...
1st way :
1. Flash Abyss note 4.2 Kernel
2. reboot into recovery | DO NOT REBOOT SYSTEM
3. Do the 3 Wipes | Data, Cache and Dalvik
4. Install your ics rom... follow the exact instructions.
2nd Way .
1. Use PC ODIN to flash a GB ROM
2. r00t it
3. 3 wipes in the GB CWM
4. Install your ICS ROM following the exact instructions.
Cheers
i am currently on rocket rom v3 lpy
can do a full wipe?? because some post said it will brick the phone
how do i find out if i can safely wipe it??
o(T_T) said:
i am currently on rocket rom v3 lpy
can do a full wipe?? because some post said it will brick the phone
how do i find out if i can safely wipe it??
Click to expand...
Click to collapse
See first and second post > follow instructions in second post > thank second post author.
hackerboi said:
1st way :
1. Flash Abyss note 4.2 Kernel
2. reboot into recovery | DO NOT REBOOT SYSTEM
3. Do the 3 Wipes | Data, Cache and Dalvik
4. Install your ics rom... follow the exact instructions.
2nd Way .
1. Use PC ODIN to flash a GB ROM
2. r00t it
3. 3 wipes in the GB CWM
4. Install your ICS ROM following the exact instructions.
Cheers
Click to expand...
Click to collapse
Thank you. I will try it now
o(T_T) said:
i am currently on rocket rom v3 lpy
can do a full wipe?? because some post said it will brick the phone
how do i find out if i can safely wipe it??
Click to expand...
Click to collapse
Do NOT wipe data on that rom.
Thanks... Did a full wipe and installed crisko 5.1
Works like a charm and no messups
Hi All, Need a little help here
I install Rocket rom and now all i get is a video of androids riding tron like bikes and it goes blank.
Did i do something wrong?
let us know the state of the phone before installing the rom ( rooted / rom version / kernel )
and the procedure you followed
I Had Installed [PhilZ-cwm6] v2.7N * Safe Stock Kernel+CWM6 following this guide http://forum.xda-developers.com/showthread.php?t=1329360
I downloaded RocketRom V. 2.3 and moved it to the ext SD card on the note, then i booted into recovery and installed from sd card.
it installed and restarted and been getting this issue since
reboot into recovery
do a wipe data / factory reset
wipe cache partition
advanced >wipe dalvik
reboot system now
check what happens
Ventcrawler said:
I Had Installed [PhilZ-cwm6] v2.7N * Safe Stock Kernel+CWM6 following this guide http://forum.xda-developers.com/showthread.php?t=1329360
I downloaded RocketRom V. 2.3 and moved it to the ext SD card on the note, then i booted into recovery and installed from sd card.
it installed and restarted and been getting this issue since
Click to expand...
Click to collapse
1. if RocketRom V. 2.3 is GINGERBREAD then fullwipe format factory in CMW solve the issue in my case.
2. if RocketRom V. 2.3 is ICS dont fullwipe will brick your phone.
-flash Speedmod 3-15 in CMW go to advance>reboot recovery. wait until recovery rebooted
-Fullwipe format factory... hope this help
:cyclops:
mistajoe83 said:
2. if RocketRom V. 2.3 is ICS dont fullwipe will brick your phone.
-flash Speedmod 3-15 in CMW go to advance>reboot recovery. wait until recovery rebooted
-Fullwipe format factory... hope this help
:cyclops:
Click to expand...
Click to collapse
as this is a custom rom, the dev will not make the mistake of making it on the stock kernel.. so it will always have a safe kernel and CWM
just do wipe data and cache if u r from ICS , if Gingerbread, u must use another method
all done, thanks for the help guys
i really need help on those Root Gurus out there.
Android Version : 4.0.3
Baseband Version : N7000XXLPT
Kernel Version : 3.0.15-Franco Kernel [email protected] #5 SMP PREEMPT
Build Number : KingDroid NoteMania Edition V3.0
Click to expand...
Click to collapse
Okay heres the thing , I want to flash a new roms and I did the same old thing
Wipe data/Factory reset
Wipe cache partition
Go to advance screen and wipe dalvik cache
Install zip from sd card - > choose zip from sd card. Find your ROM in the extSDcard.
Flash the ROM and reboot system.
While flashing , it took so long to actually flash like 10mins or so and I give up and I did a hard reset.
Can anyone point to me where did I do wrong ?
And I'm trying to flash this
http://rootgalaxynote.com/galaxy-note-roms/tmt4-jelly-bean-rom-for-galaxy-note-gt-n7000/
Up this post .
Up.for.awareness
Just download Hydracore, go back to recovery and flash it... Then go advanced options and reboot recovery.. After that wipe everything again and flash the new rom... Stay away from franco kernel that's way outdated and doesn't work with anything
Tapatalking on my n7000
msedek said:
Just download Hydracore, go back to recovery and flash it... Then go advanced options and reboot recovery.. After that wipe everything again and flash the new rom... Stay away from franco kernel that's way outdated and doesn't work with anything
Tapatalking on my n7000
Click to expand...
Click to collapse
i tried flashing hydracore and it took for me 10mins plus at the screen and still at the same place.
you tried to flash hydracore, and its not installing ?
may be try to flash back the stock ICS using odin and then flash Philz kernel to gain root
.boot into recovery and go to mounts & storage.
format / sytem
format / data
then try to install your TMT rom
If TMT is installed, Or even part installed then it wont boot with Hydracore kernel, The main thing is just having the kernel installed cause its safe, So, In recovery (with Hydracore installed)
Do all the necessary wipes, Flash the ROM, Then flash the kernel (Philz kernel)
then it should boot
If not, follow the above post to revert back to stock ICS / GB with odin, and then start the whole procedure again :good:
Hey,
I got little problem and I need some help. I wanted to falsh OMNI AsylumKANG (from thread http://forum.xda-developers.com/showthread.php?t=2591479 ) , but my n7000 failed to start system. Instead after samsung logo it restarted into twrp screen.My version number is N7000XXLT9. These are steps I made:
1. using stock recovery I flashed PhilZ-cwm6-XXLT9-ORA-5.11.2-signed
2. then launched and rebooted into PhilZ recovery
3. flashed raw_kernel_r4_j43 and reboot into recovery
4. wiped data, cache partition and dalvik cache
7. flashed AsylumKANG_4.4.2_n7000_Build2.2
8. flashed pa_gapps-modular-mini-4.4.2-20140111-signed
9. flashed UPDATE-SuperSU-v1.86
10. reboot
Afterwards as I said phoned showed samsung logo and rebooted itself to twrp recovery
What is problem here?
Thanks for help.
Should reflash Philz. Go to wipe/factory reset menu, then choose clean to install rom. Then go to advanced, wipe dalvik cache. Then reflash raw5, then flask rom.
Sent from my phone.
forest1971 said:
Should reflash Philz. Go to wipe/factory reset menu, then choose clean to install rom. Then go to advanced, wipe dalvik cache. Then reflash raw5, then flask rom.
Sent from my phone.
Click to expand...
Click to collapse
Thanks for idea but I didn't help I flashed stock rom, then Philz then clean to install rom, wipe dalvik cache and the rest is just like from step 3 down. Same issue. I flashed once again stock rom and Philz, but this time installed paranoid android 3+ (pa_n7000-3.99-RC2-20131012). It worked. Maybe I just wait for more kitkat 4.4 based rom releases and then try.
After flash r5 you need to boot into recovery before proceed with lashing rom. Make sure you have done that step.
Sent from my phone.
forest1971 said:
After flash r5 you need to boot into recovery before proceed with lashing rom. Make sure you have done that step.
Sent from my phone.
Click to expand...
Click to collapse
After flash r4 i boot into recovery. You're saying to flash r5 instead of r4?