Related
Hi I'm unable to make a backup using the CWM, stuck while backing up "bb"
Code:
CWM-based Recovery v5.0.2.7
SD Card space 12492MB
backing up boot image...
backing up system...
bb
the backup process is stuck on bb (i've wait more than one hour)
I've also test on cwm 5.5
I'm using the franco kernel and the same problem on the r4 and r5
my flash hystory:
Stock GB -> Stock GB (newer) with root -> stock LPY (using Mobil odin for flash with chainfire kernel) (3 hours after, read warning about brick) -> stock GB using odin PC -> factory reset under GB -> (waiting a long time...) -> install cwm -> flash Criskelo's ICS V5.1 and without reboot flash franco kernel r5 -> trying to make a backucp (stuck on bb) -> wipe /data, /cache, /davil cache then trying to make a backup (still stuck on bb) -> try to flash Cassie's XtraLiteRom ICS Version 2.9 LQ2 stuck at the begenning -> flash franko kernel r4 and try to make a backup and still stuck on bb
I've made only one factory reset under android's ui and it was on GB, juste after roll back from LPY, and I've made only one full wipe under ICS (franko kernel r5 (Removed MMC_CAP_ERASE and chainfire's fix in cwm 5.5) so it might to be safe ?
How can I check if I've a damaged emmc chip ?
why i've these problems ?
Thanks
EDIT:
FIXED: http://forum.xda-developers.com/showpost.php?p=27169589&postcount=20
Up, nobody have an idea for solve my problem ??
You can use "gotbrickbug" in themes/apps by chainfire to see if you have dangerous firmware but there's no way to know if your emmc chip is damaged already unless its bricked.
andreww88 said:
You can use "gotbrickbug" in themes/apps by chainfire to see if you have dangerous firmware but there's no way to know if your emmc chip is damaged already unless its bricked.
Click to expand...
Click to collapse
I've tested the app yesterday and i've the brickbug (0x19 driver) but I havn't made any wipe on no-safe ics and I spend only 3 little hours on the stock LPY
Hi WormsCH,
You wrote stock LPY (using Mobil odin for flash with chainfire kernel) (3 hours after, read warning about brick) what version of CF-Root did you use then ? Did you perform wipe data/factory reset with it ?
Unfortunately it sounds like superbrick.
Boy124 said:
Hi WormsCH,
You wrote stock LPY (using Mobil odin for flash with chainfire kernel) (3 hours after, read warning about brick) what version of CF-Root did you use then ? Did you perform wipe data/factory reset with it ?
Unfortunately it sounds like superbrick.
Click to expand...
Click to collapse
He didn't do a data wipe on any of the bad kernels, he said he used franco. Sounds like a corrupted file or something.
Get into download mode and Odin back to gingerbread.
Boy124 said:
Hi WormsCH,
You wrote stock LPY (using Mobil odin for flash with chainfire kernel) (3 hours after, read warning about brick) what version of CF-Root did you use then ? Did you perform wipe data/factory reset with it ?
Unfortunately it sounds like superbrick.
Click to expand...
Click to collapse
I've used the first CF-Root for LPY released by chainfire.
I havn't made any wipe or factory reset under LPY.
just spent 3 hours (internet browsing, drawing, take some pictures) and after I'had read the brick bug, I've used odin PC for flash official GB and perform a factory reset under GB
andreww88 said:
He didn't do a data wipe on any of the bad kernels, he said he used franco. Sounds like a corrupted file or something.
Get into download mode and Odin back to gingerbread.
Click to expand...
Click to collapse
I get back on GB using Odin, then install CWM (I can perform a backup with the cwm under GB).
Then flash Criskelo's ICS V5.1 -> advanced -> reboot recovery
-> wipe cache/data => stuck while wiping...
get back under GB (Odin)-> install CWM -> flash franko kernel -> advanced, reboot recovery -> flash a rom => stuck at the begining...
it appear than each action on cache/data under ICS got stuck
I get back to GB LC1 stock frimware with PIT file, then flashed the pre rooted LC1, then install cwm for LC1.
-> wipe cache/data
-> install Criskelo's ICS V5.1 -> advanced -> reboot recovery
-> trying to make a backup and still stucked at the end of system backuping (bb)
how can I solv it ????
what it this problem ?
what can I try for solve my problem ?
Have I a dammaged chip ?
nobody can help me ?
WormsCH said:
nobody can help me ?
Click to expand...
Click to collapse
It is superbricked.
Flash stock kernel and send it to SSC. MoBo needs to be replaced.
Boy124 said:
It is superbricked.
Flash stock kernel and send it to SSC. MoBo needs to be replaced.
Click to expand...
Click to collapse
how can I explain to Sammy than I've a problem with my note...
Under GB evrything seem to works correctly and under the CWM on a GB kernel i can backup, restor, flash etc....
under ICS i got stuck when backup, restor, or flash a rom (flash kernel and some fixes seem to works)
Ive the same issue on franco kernel r4 and r5
If you can be on GB, it's obviously not super bricked. I'm sorry I haven't responded sooner. Went to bed last night and forgot to get back on this morning and check it out. Let me read slowly back through everything and see what I can come up with. Go back to Gingerbread right now and root it and get CWM recovery.
---------- Post added at 10:42 AM ---------- Previous post was at 10:37 AM ----------
WormsCH said:
I get back on GB using Odin, then install CWM (I can perform a backup with the cwm under GB).
Then flash Criskelo's ICS V5.1 -> advanced -> reboot recovery
-> wipe cache/data => stuck while wiping...
get back under GB (Odin)-> install CWM -> flash franko kernel -> advanced, reboot recovery -> flash a rom => stuck at the begining...
it appear than each action on cache/data under ICS got stuck
Click to expand...
Click to collapse
Okay, you can't flash Franco kernel on GB so that would explain it not working I think.
Like I said last post, get on Gingerbread w/ root and CWM. Flash an ICS rom (I would suggest CM9 variation but that's just me). If you flash a Samsung ICS rom thats fine but don't wipe data. Wipe cache and dalvik. Flash Franco or Speedmod if on Sammie ICS rom. Let it boot up. If it doesn't boot, wipe data (only if on the safe kernel).
Edit:
Also, sounds like you having problems with the Franco kernel. Will you try Speedmod kernel?
andreww88 said:
If you can be on GB, it's obviously not super bricked. I'm sorry I haven't responded sooner. Went to bed last night and forgot to get back on this morning and check it out. Let me read slowly back through everything and see what I can come up with. Go back to Gingerbread right now and root it and get CWM recovery.
---------- Post added at 10:42 AM ---------- Previous post was at 10:37 AM ----------
Okay, you can't flash Franco kernel on GB so that would explain it not working I think.
Like I said last post, get on Gingerbread w/ root and CWM. Flash an ICS rom (I would suggest CM9 variation but that's just me). If you flash a Samsung ICS rom thats fine but don't wipe data. Wipe cache and dalvik. Flash Franco or Speedmod if on Sammie ICS rom. Let it boot up. If it doesn't boot, wipe data (only if on the safe kernel).
Edit:
Also, sounds like you having problems with the Franco kernel. Will you try Speedmod kernel?
Click to expand...
Click to collapse
I can flash franco kernel from a GB kernel, and I can boot to ICS and use my phone on ICS, evrything seem to works (not fully tested) but, when I'm on ICS kernel (the franco kernel) I can't flash other rom, or make a backup, or restor a backup or sometime wipe data and cache from CWM, just get stuck, need to remove battery or wait with power button hold down.
Once my phone reboot I'm still under ICS and my phone is still working
From CWM under ICS kernel, I can switch between franco kernel r4 and r5, but that's all.
the issue seem to be only on CWM with an ICS kernel. Maybe could I try to write something on /system for see if it's work ?
EDIT:
I'll test the SpeedMod kernel
WormsCH said:
I can flash franco kernel from a GB kernel, and I can boot to ICS and use my phone on ICS, evrything seem to works (not fully tested) but, whene I'm on ICS kernel (the franco kernel) I can't flash other rom, or make a backup, or restor a backup or sometime wipe data and cache from CWM, just get stuck, need to remove battery or wait with power button hold down.
Once my phone reboot I'm still under ICS and my phone is still working
From CWM under ICS kernel, I can switch between franco kernel r4 and r5, but that's all.
the issue seem to be only on CWM with an ICS kernel. Maybe could I try to write something on /system for see if it's work ?
Click to expand...
Click to collapse
Yeah, definitely not bricked then. So, have you TRIED another kernel, like Speedmod? Or just franco ones?
You might not have complete root. So yeah, open up root explorer (or something equivalent) and try to paste a file in /system (make sure you are on R/W). See if that works. If it does, you have root.
I'd say go back to Gingerbread and flash a CM9 rom this time and see if that works just so we can rule out something.
Sorry. It is not super brick.
Did you try different ICS kernels ?
See if you can finish backup with speedmod kernel.
Hi, sorry for long reply.
I've flashed SpeedMode Kernel, and when I tryed to make a backup, the backup stuck at the begin (camera_shoot.ogg)
I tryed to write something to /system, but I wasn't correctly root, so I installed SU-installer.zip from cwm then reboot, i was root, but unable to remount /system in rw mode, and unable to install superSU.
i've tested to write on /system under GB, and it's working.
Why can't I remount /system under ICS ??
EDIT:
on ICS the /system is on /dev/block/mmcblk0p7 and on GB the /system partition is on /dev/block/mmcblk0p9
could mmcblk0p7 be dammaged ??
WormsCH said:
on ICS the /system is on /dev/block/mmcblk0p7 and on GB the /system partition is on /dev/block/mmcblk0p9
could mmcblk0p7 be dammaged ??
Click to expand...
Click to collapse
the mmcblk0p7 equal to cache on GB
up ?
FIXED !!
Finally get it worked !!
I'll describ all the steps for others who can have this issue.
Some steps are maybe useless, but after 4 days of test, flash, wipe, softbrick It's finally works.
-I've flashed with Odin PC: N7000XXKKA -- 2.3.6 201--November-- N7000OXXKK5 --Switzerland and I used the .pit file "Q1_20110914_16GB.pit"
-boot in default recovery for wipe data/cache
-full boot on GB then type *#272*IMEI# then change the CSC to AUT (was on KOR ) Auto reboot & wipe after apply
-After reboot, apply the OAT update N7000XXLA6--2.3.6--2012 January N7000OXXLA1--Switzerland (~75MB)
-Flash with pdin PC the AbyssNotekernel42CWTouchOriginalLogo (this setp Add the warning triangl and incrase counter) after that step I was able to backup and write on /system
-Flash without wipe the KingDroid ICS NoteMania Edition v2.0 after that step I was still able to make a backup under the new CWM and write on /system under ICS
-Flash without wipe Criskelo's ICS V5 then without reboot, the 5.1 fix, then the 15 Scrolling Toggles SystemUI, then the franco r5, then reboot.
after that I was still able to backup and write on /system
-Boot in recovery -> wipe /data, /cache, /davil cache then restored my google account and all my apps.
now I'm able to write on /system and make a backup on CWM
I hop this will help other people
And Thanks for your help
I have N7000 with ICS (4.0.3) and XXLQ2 firmware. I have flashed chainfire's CF-Root kernel. BUT I want to completely reset/wipe the phone to its pristine condition. I have checked 'got brickbug' and i have got the brick bug. so what am i supposed to do? If I wait, will this bug be resolved by Samsung in an upgrade to ICS, or should I go 'back' to GB (if so, how), or can I ignore the brick bug thing and get on with it?
So you don’t want the Odin back to GB. Well then you have the Abyss Note 4.2 Kernel with Redpill Touch recovery. You are on any unsafe kernel ICS Rom and you want to go to safe rom then do one last CWM flash of Abyss kernel reboot recovery and then flash the safe roms. This keeps your root intact. You can even acieve root though this if you have lost it. Just flash Abyss 4.2 go to GB. Check root there and then flash the ICS rom. No need of repack. If any of this gets struck or brick then you know your way out already…..you told that in the question. Link for Abyss 4.2 Kernel is here.http://forum.xda-developers.com/showthread.php?t=1362424 --Download AbyssNote 4.2 kernel with redpill touch recovery Or Abyss 3.9 Kernel (for some users where the 4.2 kernel haven't worked 3.9 worked perfect).
--Now first put this zip on your SD Card before you try to flash anything or restore anything.
--Now boot into recovery - Volume up + Home + Power
--Choose - install zip from SD Card
--Navigate to your Abyss kernel 4.2 or 3.9 zip and flash it
--After flashing is complete- go back to the Recovery start menu
--Go to advanced > reboot recovery
--This will reboot the phone directly to new recovery - Hyperdroid Redpill Recovery
--Now go to Wipe Menu and wipe cache, dalvik and do your factory reset
--After this start your restore from nandroid backup , or flash any GB rom !
Cheers!! Enjoy your Note!
Can be used to wipe only
devid801 said:
So you don’t want the Odin back to GB. Well then you have the Abyss Note 4.2 Kernel with Redpill Touch recovery. You are on any unsafe kernel ICS Rom and you want to go to safe rom then do one last CWM flash of Abyss kernel reboot recovery and then flash the safe roms. This keeps your root intact. You can even acieve root though this if you have lost it. Just flash Abyss 4.2 go to GB. Check root there and then flash the ICS rom. No need of repack. If any of this gets struck or brick then you know your way out already…..you told that in the question. Link for Abyss 4.2 Kernel is here.http://forum.xda-developers.com/showthread.php?t=1362424 --Download AbyssNote 4.2 kernel with redpill touch recovery Or Abyss 3.9 Kernel (for some users where the 4.2 kernel haven't worked 3.9 worked perfect).
--Now first put this zip on your SD Card before you try to flash anything or restore anything.
--Now boot into recovery - Volume up + Home + Power
--Choose - install zip from SD Card
--Navigate to your Abyss kernel 4.2 or 3.9 zip and flash it
--After flashing is complete- go back to the Recovery start menu
--Go to advanced > reboot recovery
--This will reboot the phone directly to new recovery - Hyperdroid Redpill Recovery
--Now go to Wipe Menu and wipe cache, dalvik and do your factory reset
--After this start your restore from nandroid backup , or flash any GB rom !
Cheers!! Enjoy your Note!
Click to expand...
Click to collapse
--After this start your restore from nandroid backup , or flash any GB rom ! OR Flash any ICS Kernel you want!
Hi Folks,
i have a simple question and i hope someone can answer this:
I'm on GB 2.3.6 with XXLC1 (i did this via flashing old GB ->zergrush exploit -> GB 2.3.6 via mobile odin with keep root)
Am i right when i say that all i have to do now is putting the PA.zip in the root directory and flash it via CWM?
Or do i have to change the kernel or any other things?
Download and flash abyss kernel in CWM, then reboot into recovery (under advanced in CWM) and do a full wipe and then install PA
azzledazzle said:
Download and flash abyss kernel in CWM, then reboot into recovery (under advanced in CWM) and do a full wipe and then install PA
Click to expand...
Click to collapse
with abyss kernel you mean abyssnote 4.2 right? (http://forum.xda-developers.com/showthread.php?t=1362424&highlight=abyss)
Original or RedPill?
Thank you very much!
I dont think it matters, But ive always used the redpill version
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
chochweet said:
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
Click to expand...
Click to collapse
What process are you using to flash paranoid rom?
chochweet said:
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
Click to expand...
Click to collapse
Can you provide more info, what kernel and rom are you using to flash PA?
Hi
I tried it from ics (crash v8.1, liquid black 3.2, criskelorom v9, fusion Tom 2.5, rocket Tom v10) ........ no result
I tried it from the gb 2.3.6 (stock).... no result
I used clockworkmod recovery... abyss kernel
Everytime the same problem hung on the boot logo... and no access to clockworkmod recovery....
Sent from my GT-N7000 using xda app-developers app
Go back to gingerbread, root and install clockworkmod, put the pa ROM & gapps zip on your sdcard then go into recovery (cwm) factory wipe data 2-3 times, flash ROM then gapps next wipe cache 2-3 times, finally reboot and wait.
Sent From An Awesome Jelly Bean Galaxy Note
Att.Fan1982 said:
Go back to gingerbread, root and install clockworkmod, put the pa ROM & gapps zip on your sdcard then go into recovery (cwm) factory wipe data 2-3 times, flash ROM then gapps next wipe cache 2-3 times, finally reboot and wait.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
Do I need to install abyss kernel to format and wipe or the native 5.0.2.7 recovery is enough.. and is it safe to wipe cache,format factory reset in stock 2.3.6 by cwm recovery 5.0.2.7
Sent from my GT-N7000 using xda app-developers app
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
Ok let me try
I will let u know about the progress
Sent from my GT-N7000 using xda app-developers app
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
done .... flashed stock 2.3.6 gb rom... flashed cwm recovery and did the same as u told me to do... but again struck on the boot screen logo...
i cant access recovery but can still access download mode....
even i cant understand where is the problem why paranoid is not working on my note.....confused
can i try installing paranoid without installing gapps..... will that work or not?
when you were on GB stock without rooting did you boot into recovery and wipe data, cache ?
( vol up + home + power ) buttons in combination together take you into recovery. you have to keep pressing till N7000 logo shows up, then u let go and then recovery appears
If you already know and done it then im sorry to repeat.
what method you followed to root GB ?
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
rraaka said:
when you were on GB stock without rooting did you boot into recovery and wipe data, cache ?
( vol up + home + power ) buttons in combination together take you into recovery. you have to keep pressing till N7000 logo shows up, then u let go and then recovery appears
If you already know and done it then im sorry to repeat.
what method you followed to root GB ?
Click to expand...
Click to collapse
i used CF-Root-SGN_ZS_MUL_KK1-v5.0-CWM5.rar to root and install recovery...
if you are still on this recovery, get into recovery and wipe data, cache, (advanced ) --- dalvik
give the names of the rom files you have downloaded to flash....
rraaka said:
if you are still on this recovery, get into recovery and wipe data, cache, (advanced ) --- dalvik
give the names of the rom files you have downloaded to flash....
Click to expand...
Click to collapse
190712-102621-STAXXTANIUM-v17.zip
paranoid_note_v05.zip
paranoid_note_v04a.zip
nothing is working
and when i try to install
crashrom
criskelrom
liquidblack
etc
they work fine...
its only when i try to install paranoid i get this problem.... cant understand y
there is one difference is paranoid and other roms is size... paranoid is abt 130mb but rest of the custom roms are 700 to 800 mb
your present status is this right ? - GB 2.3.6, rooted with cfroot, phone compltetly booted and working fine ?
you can get into recovery ?
rraaka said:
your present status is this right ? - GB 2.3.6, rooted with cfroot, phone compltetly booted and working fine ?
you can get into recovery ?
Click to expand...
Click to collapse
yes working absolutely perfect... and recovery is also acccessable...
stock and all other custom roms are working
only problem when i try to install any damn version of paranoid
you must keep gapps ics ready for flashing with PA v0.4a,
keep both zip files on sd card
get into recovery, wipe as told before
install zip from sd card ( remember the name and keep looking till you find it ) choose zip file,, flash it,
then same thing with gapps , flash
do the wipes again
then reboot phone ( first boot takes time so be patient )
you can use the present recovery or flash abyss kernel - --go to advanced -- reboot recovery ...etc etc ( same proceedure)
if this doesnt work ill tell you a method using CM9 safe kernel tar ( give me some time)
rraaka said:
you must keep gapps ics ready for flashing with PA v0.4a,
keep both zip files on sd card
get into recovery, wipe as told before
install zip from sd card ( remember the name and keep looking till you find it ) choose zip file,, flash it,
then same thing with gapps , flash
do the wipes again
then reboot phone ( first boot takes time so be patient )
you can use the present recovery or flash abyss kernel - --go to advanced -- reboot recovery ...etc etc ( same proceedure)
Click to expand...
Click to collapse
i have already tried this procedure so many times, but everytime after finishing installation, rebooting the phone and damn its struck again at boot logo.....
i think its the kernel and recovery which gets erased during the installation of paranoid thats y it gets struck at boot logo
Maybe you have a corrupted download. Check md5 sum to verify.
sahilarora2003 said:
Maybe you have a corrupted download. Check md5 sum to verify.
Click to expand...
Click to collapse
i verified all the zip files (roms) i downloaded..... everything is just fine
chochweet said:
i verified all the zip files (roms) i downloaded..... everything is just fine
Click to expand...
Click to collapse
Do these steps and let me know if its still there.
As I know you are on Rooted GB rom right now.
So Reboot into recovery
Full Wipe
Reboot Recovery
Go to Mounts and storage
Mount system
mount cache
mount data
Format data
Format system
Format Cache
Reboot Recovery
Now
Flash Paranoid Rom
Flash Gapps
Now Again Full Wipe
Reboot System
C if it works
Cheers
Hi all,
I know similar questions have been asked literally hundred times, but as a complete noob to roms, I want to make sure that I get a full set of instructions and then I won't brick my phone. I want to upgrade my note to this JB Rom by cronosmachine. I'm on stock ICS 4.0.4. Never rooted or did modding to the phone. No kernel change (which I know nothing about), nothing.
I'm not sure how much info you guys will need but here are the basics:
Baseband version: N7000XXLRB
Kernel version: 3.0. 15-1115729
[email protected] #3
SMP PREEMPT Thu Sep 20 00:40:29 KST 2012
Build number: IMM76D.ZSLPN
I know that I have to first root my phone to get CWM? My guess is to follow method 1 on [24sept12]How to Root/Unroot Samsung Galaxy Note + CWM?
And then from there I don't know what to do in order to get the ROM onto my phone.
And is there anything else I need to be aware of?
Appreciate any kind of help.
yes first root usin 1a method using philz kernel.
Once done, you will have root and cwm and is a safe kernel.
Download the zip file of the rom you want to flash and place it on internal or external sd card.
boot into recovery now (vol up +power+home)
go to mounts and storage
format/system
format/data
format/cache
go to advanced
wipe dalvik cache
go back
install zip.
point to the rom you downloaded.. and wait for it to install. that's all. see your phone booting into jb.
hope that was clear enough
nokiamodeln91 said:
yes first root usin 1a method using philz kernel.
Once done, you will have root and cwm and is a safe kernel.
Download the zip file of the rom you want to flash and place it on internal or external sd card.
boot into recovery now (vol up +power+home)
go to mounts and storage
format/system
format/data
format/cache
go to advanced
wipe dalvik cache
go back
install zip.
point to the rom you downloaded.. and wait for it to install. that's all. see your phone booting into jb.
hope that was clear enough
Click to expand...
Click to collapse
On Phils' post where I can download the rooted kernel, I don't see XXLRB (my baseband version), but I do see a ZSLPN (my build number). Is the ZSLPN the one i'm supposed to download?
rcheung28 said:
On Phils' post where I can download the rooted kernel, I don't see XXLRB (my baseband version), but I do see a ZSLPN (my build number). Is the ZSLPN the one i'm supposed to download?
Click to expand...
Click to collapse
Yes, bas band refers to the modem, Build Number is rom.
Sent from my GT-N7000 using xda premium
Thanks SpyderTracks.
One more question before I pull the trigger, can all this be done with the "internal" SD card? Or does it have to be an external SD?
stock recovery doesnot allow installation from internal SD. so external is required. but you can use PC odin to install it, but it will leave a yellow triangle and increase the counter. later you can use triangle away app to reset it, Final call is yours.,
So after I installed philz's root and safe kernel, I went into recovery to wipe data cache system, went also wiped dalvik. Then I went to the main menu, chose install zip, tried to select choose zip from sdcard, but it keeps giving me this error: E:Can't mount /sdcard/
Nevermind, I managed to install from internal SD. But I'm not liking the ROM that much, so I plan on flashing CM10 Nightly to try it out.
On the CM10 thread, it says that I shouldn't be on a ROM based on stock. What I want to do is to flash CM9. But in order to do that, I'm not sure if I'm already on a safe kernel (after rooting using dr.ketan's 1a method (Phil's)).
what rom are you on now?
nokiamodeln91 said:
what rom are you on now?
Click to expand...
Click to collapse
I'm on this rom, it's a tw based rom based on the leaked jb ls7?
I am not sure what kernel it has. boot into recovery and check what you see.. If it's philz the you can just flash the cm10 on it. else. install philz xxls7
nokiamodeln91 said:
I am not sure what kernel it has. boot into recovery and check what you see.. If it's philz the you can just flash the cm10 on it. else. install philz xxls7
Click to expand...
Click to collapse
I'm not sure either, I booted into recovery, went into Philz Settings > about, and got CWM base 6.0.1.5, and PhilZ Touch 3.00 (n7000).
And what you're saying is that if I'm on Philz xxls7 kernel, I can go right to flashing CM10, without worrying the "do not flash on stock based ICS fw" (even though I'm on jb)?
Yes.. you are on philz kernel and you can directly install CM10
nokiamodeln91 said:
Yes.. you are on philz kernel and you can directly install CM10
Click to expand...
Click to collapse
Thanks for the information. But I want to know what makes my case an exception from
- Make sure to run CM9 or an AOSP-based ROM : FLASHING FROM STOCK ICS OR ROMS BASED ON STOCK ICS WILL RESULT IN A BRICK! - You're warned!
Click to expand...
Click to collapse
.
I'm on a JB rom but it's based on stock, isn't that essentially the same as based on stock ICS?
the warning was when the safe ics kernels were not in effect.
nokiamodeln91 said:
the warning was when the safe ics kernels were not in effect.
Click to expand...
Click to collapse
Thanks for the quick reply!! When I get home, I'll try this out!
So what I need to do is
put the zip files onto my SD,
reboot into recovery,
install the rom,
install google apps,
wipe data,
factory reset,
reboot into cm10
I don't need to wipe system/cache/dalvik??
once in recovery
mounts & storage
format/system & data & cache
then install rom & gapps
nokiamodeln91 said:
once in recovery
mounts & storage
format/system & data & cache
then install rom & gapps
Click to expand...
Click to collapse
Thanks a lot for guiding me through this, everything worked out perfectly!
great. now enjoy the cm10..:thumbup::thumbup::thumbup:
How come even after I performed format system cache data dalvik, some of the settings are still left on the phone? e.g. previously saved wireless networks, wallpapers... How can I completely start from scratch?