Bootlop after Rocket Rom ICS 4.1 Install [SOLVED] - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hi guys,
I have just installed Rocket Rom ICS v4.1 and have found myself in a bootloop. I can boot into recovery but i'm really worried about bricking my phone.
I have tried reflashing the abyss kernal v4.2 but it freezes on install before restarting after about 5 minutes.
I have a nanoid backup of my GB phone but as I understand it you need abyss to restore to this safely.
What would you guys suggest?
Thanks in advance for any help
Regards

speeder1987 said:
Hi guys,
I have just installed Rocket Rom ICS v4.1 and have found myself in a bootloop. I can boot into recovery but i'm really worried about bricking my phone.
I have tried reflashing the abyss kernal v4.2 but it freezes on install before restarting after about 5 minutes.
I have a nanoid backup of my GB phone but as I understand it you need abyss to restore to this safely.
What would you guys suggest?
Thanks in advance for any help
Regards
Click to expand...
Click to collapse
You can get into recovery but you cannot reflash abyss kernel. If this is the case you can use pc odin to flash abyss. You can download the tar file from:
http://downloadandroidrom.com/file/...rnel/AbyssNotekernel42CWTouchOriginalLogo.tar
You can then restore your backup once you are on abyss recovery.
It would be safer if you use pc odin to flash a GB rom.

tknguyencsu said:
You can get into recovery but you cannot reflash abyss kernel. If this is the case you can use pc odin to flash abyss. You can download the tar file from:
http://downloadandroidrom.com/file/...rnel/AbyssNotekernel42CWTouchOriginalLogo.tar
You can then restore your backup once you are on abyss recovery.
It would be safer if you use pc odin to flash a GB rom.
Click to expand...
Click to collapse
Thanks fro the speedy response
let me just check I understand you correctly (I am new to this). I think I would rather just go back to my working GB rom. So if I just follow the guide listed in to flash the kernel
http://forum.xda-developers.com/showthread.php?t=1424997
and choose the N7000XXKKA English kernel, once flashed I can just restore my nanoid backup. This means I will not need the abyss kernel either?
Again thanks for the help, its greatly appreciated.
Regards

speeder1987 said:
Thanks fro the speedy response
let me just check I understand you correctly (I am new to this). I think I would rather just go back to my working GB rom. So if I just follow the guide listed in to flash the kernel
http://forum.xda-developers.com/showthread.php?t=1424997
and choose the N7000XXKKA English kernel, once flashed I can just restore my nanoid backup. This means I will not need the abyss kernel either?
Again thanks for the help, its greatly appreciated.
Regards
Click to expand...
Click to collapse
Yes, if you choose to go that route to go back to your GB rom you will not need abyss.

Thanks i'll let you know how it goes

Thanks for all the help, my phone is now working and restored back to GB.
I ended up using pc odin to flash the Abyss 4.2 kernel and then doing a restore
Again thanks for all the help I was really worried then I'd ruined my phone.

is there a way of marking the thread as solved now?
regards

speeder1987 said:
is there a way of marking the thread as solved now?
regards
Click to expand...
Click to collapse
Go to edit option, Insert (Solved) In the thread title..

Related

[Q]Problem encountered while reverting from ics to GB

I've searched the entire forum and Google as well, http://forum.xda-developers.com/showthread.php?p=24656901 should provide the best explanation on how to revert back to GB.
However, in that thread, he mentioned that I need to flash abyss 4.0+ kernel first before restoring the backup. How about if the backup file is corrupted for some reason, are there any alternatives to revert back?
Also, if my phone was bricked one day(assume I can enter downloadmode but not CWM, which means I can't flash the abyss 4.0+ kernel), can I use the USB jig and flash the ics leak according to Dr Ketan's guide?
kelvin fong said:
How about if the backup file is corrupted for some reason, are there any alternatives to revert back?
Click to expand...
Click to collapse
Yes. Download any custom GB rom to your PC (Darky, Cassie's XL, whatever), pull your SD card out, slot it in SD Card reader, transfer the GB rom from your PC to your SD card. Put the card back into your phone.
Boot into CWMR, flash Abyss, reload Recovery to get the Redpill one.
Do your wipes (data, cache, dalvik).
Tap 'install zip from SD card', navigate to your GB rom, and flash.
Reboot when the flash is done.
Pour yourself a stiff drink.
kelvin fong said:
Also, if my phone was bricked one day(assume I can enter downloadmode but not CWM, which means I can't flash the abyss 4.0+ kernel), can I use the USB jig and flash the ics leak according to Dr Ketan's guide?
Click to expand...
Click to collapse
I wouldn't recommend that. I'd flash a rootable stock Rom via PC Odin, root it, flash the 1st ICS repack and flash the ICS rom of your choice. It's safer this way.
chasmodo said:
I wouldn't recommend that. I'd flash a rootable stock Rom via PC Odin, root it, flash the 1st ICS repack and flash the ICS rom of your choice. It's safer this way.
Click to expand...
Click to collapse
However in that situation I got a bricked phone with other kernel not Abyss Kernel.
People just emphasize flashing Abyss Kernel b4 reverting to GB, is that really viable to flash stock GB rom via pc odin?
kelvin fong said:
However in that situation I got a bricked phone with other kernel not Abyss Kernel.
People just emphasize flashing Abyss Kernel b4 reverting to GB, is that really viable to flash stock GB rom via pc odin?
Click to expand...
Click to collapse
If soft bricked (you can just reach the Download mode, not the Recovery), flashing Abyss is out, because you have no recovery to flash it from.
The only way to get yourself out of the sticky situation without triggering the binary counter and getting the triangle is the PC Odin and stock Rom. That way your binary counter stays at NO (meaning 0).

[Q] ICS to GB

Can someone write a proper guide how to revert back from ICS to GB with CF kernel and without CF kernel?
Thanks
Sent from my GT-N7000 using xda premium
Prior to flashing GB, donot wipe data using stock or cwm recovery on ICS.
Do not use touch recovery to flash GB rom.
Do not restore GB backup from ICS.
Flash GB firmware with PC odin.
If you are stuck in bootloop or there are FCs after flashing GB, don't panic, just wipe data/factory.
OP
Haddar said:
Hello guys.
The very same thing like to OP happened to me today in the morning. After reading the warning about ICS bugs I decided to revert to GB through PC Odin. And the result is same .... stuck in factoryfs.img and not able to access recovery ...just download mode. Unfortunately I stopped reading at page 7 or so ..... need to leave the computer right now. If there are any thoughts to help us, please reply .... thanks in advance.
P.S. It looks like MoBo replacement is required, right?
Click to expand...
Click to collapse
Seems like it's not that easy!
hi...
who is the best GB or custom?

[q] from kingdroid to ics lpy

Hello guys, let me please get just a confirmation from you since I have no access to Samsung Service Center, i don't want to have a hard brick device.
What are the best procedures to upgrade from KingDroid v2.0 ICS to Open German LPY ?
Flash abysskernel and wipe then flash open german did not work
Thank you!
Use PC Odin.
Hey chasmodo thanks for your quick answer. Just to clarify a little bit, I still need to flash abyss and wipe, then go to PC Odin and flash using dr Keatan procedure ?
thank you so much again
emoibm said:
Hey chasmodo thanks for your quick answer. Just to clarify a little bit, I still need to flash abyss and wipe, then go to PC Odin and flash using dr Keatan procedure ?
Click to expand...
Click to collapse
Do not flash Abyss to wipe, it's not completely safe. Just use PC Odin to flash a GB Rom (pre-rooted or stock).

[Q] My G-note got crashed, please help me...

My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
musheercmr said:
My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
Click to expand...
Click to collapse
stuck in Samsung logo just mean you need to just fullwipe factory in CMW. but be sure you are on safe kernel such as Speedmode or Hydracore before wiping.. i dont know if xxls2 kernel is brick free or not. but stucking at samsung logo has always been solved by fullwipe factory in my case
mistajoe83 said:
stuck in Samsung logo just mean you need to just fullwipe factory in CMW. but be sure you are on safe kernel such as Speedmode or Hydracore before wiping..
Click to expand...
Click to collapse
I did full wipe but still the same .
and now how can i load safe kernel? or any other advise to fix ?
thank you.
musheercmr said:
My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
Click to expand...
Click to collapse
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes
rajsekhar.300 said:
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes
Click to expand...
Click to collapse
that is correct. takes times. but if you waited more than 10 minutes try flashing other rom.. safest method is pc odin.
rajsekhar.300 said:
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes
Click to expand...
Click to collapse
I was waiting more than a hours and i tried to Flash ICS by odin-3, that one also failed
i was in N7000DDLR9 ROM. then i flash N7000XXLS2 by mobi-odin
musheercmr said:
I did full wipe but still the same .
and now how can i load safe kernel? or any other advise to fix ?
thank you.
Click to expand...
Click to collapse
tell us how you flash it. via PC ODIN or ClockWorkMOD.?
as for the kernel if you have Extrnal sdcard then download SpeedMod 3-15 or Hydracore kernel than put that in your external Sdcard. Open CMW than flash the kernel then go to advance>reboot recovery.. wait for recovery rebooted than you are safe to flash other rom.
---------- Post added at 07:28 AM ---------- Previous post was at 07:20 AM ----------
look here.. theres a tutorial of flashing with PC ODIN + Firmware download..
the instruction is detailed and clear.. this should help you the most.
http://forum.xda-developers.com/showthread.php?t=1424997
musheercmr said:
I was waiting more than a hours and i tried to Flash ICS by odin-3, that one also failed
i was in N7000DDLR9 ROM. then i flash N7000XXLS2 by mobi-odin
Click to expand...
Click to collapse
How could you flash xxls2(jb leak) using pc odin..you need to do it using cwm
And what kernel were u on when you flashed xxls2
rajsekhar.300 said:
How could you flash xxls2(jb leak) using pc odin..you need to do it using cwm
And what kernel were u on when you flashed xxls2
Click to expand...
Click to collapse
finally i got installed ICS 4.0.4 (N7000DDLR6) by PC-Odin. thank you guys.
So from now, can you please advise, how can i flash JB (N7000XXLS2 LEAK). @ present my phone is not rooted. and running on fully stoke ROM N7000DDLR6. advise please...
musheercmr said:
finally i got installed ICS 4.0.4 (N7000DDLR6) by PC-Odin. thank you guys.
So from now, can you please advise, how can i flash JB (N7000XXLS2 LEAK). @ present my phone is not rooted. and running on fully stoke ROM N7000DDLR6. advise please...
Click to expand...
Click to collapse
First flash a safe kernel(like philz,hydracore or speedmod) and then flash the jb rom through cwm
rajsekhar.300 said:
First flash a safe kernel(like philz,hydracore or speedmod) and then flash the jb rom through cwm
Click to expand...
Click to collapse
since you flash through PC ODIN means everything is stocked. Means the brick bug is present. you now only have samsung stock recovery and not ClockWorkMod.
if you are planning to install just Samsung Stock Rom then this step is applicable here
http://techie-buzz.com/android/samsung-galaxy-note-jelly-bean-firmware-leaks.html
or
http://din.huluselangor.net/?p=21813&replytocom=5359&wpmp_switcher=mobile
if you are planning install xxls2 custom then you must first root your phone then install CMW and Flash Desired rom with safe kernel installed
look here for tutorial
http://forum.xda-developers.com/showthread.php?t=1329360
mistajoe83 said:
since you flash through PC ODIN means everything is stocked. Means the brick bug is present. you now only have samsung stock recovery and not ClockWorkMod.
if you are planning to install just Samsung Stock Rom then this step is applicable here
http://techie-buzz.com/android/samsung-galaxy-note-jelly-bean-firmware-leaks.html
or
http://din.huluselangor.net/?p=21813&replytocom=5359&wpmp_switcher=mobile
if you are planning install xxls2 custom then you must first root your phone then install CMW and Flash Desired rom with safe kernel installed
Click to expand...
Click to collapse
i tried the same as from 1st link, flashing by PC-Odin N7000XXLS2 (LEAK). but giving me FAIL! when i click start
i am using Odin 1.87, is that make any issue ?
musheercmr said:
i tried the same as from 1st link, flashing by PC-Odin N7000XXLS2 (LEAK). but giving me FAIL! when i click start
i am using Odin 1.87, is that make any issue ?
Click to expand...
Click to collapse
From where did you download the rom..it it was downloaded from sammobile or from that hotfile link,then you should flash it through pc odin
And if its a custom rom that you downloaded from the xda,then it should be flashed through cwm
the Sam mobile and the hot link are the same. youncan flash the rom using pc odin. but before that put the philz kernel xxls2 in the external sd. so that after the flash using odin, you can boot into recovery and flash that kernel and be safe and do the wipe.
nokiamodeln91 said:
the Sam mobile and the hot link are the same..
Click to expand...
Click to collapse
Yes i know..i said that just to make it clear for the op
Gents, Can you please clarify before I am going to do below. And advise if this is the proper way.
• Flash GB (2.3.6) and wipe
• Then flash ICS (4.0.4)
• Download Notecore (or Speedmod, CF root kernel) kernel and flash by PC-Odin
• Then copy N7000XXLS2 (LEAK) to SD card.
• Boot to CWM recovery, then flash from SD, restart.
Thanks.
musheercmr said:
Gents, Can you please clarify before I am going to do below. And advise if this is the proper way.
• Flash GB (2.3.6) and wipe
• Then flash ICS (4.0.4)
• Download Notecore (or Speedmod, CF root kernel) kernel and flash by PC-Odin
• Then copy N7000XXLS2 (LEAK) to SD card.
• Boot to CWM recovery, then flash from SD, restart.
Thanks.
Click to expand...
Click to collapse
All those steps are correct if you are about to flash a leaked jb rom
If its a leaked custom jb rom,then you need to flash it through cwm
[email protected]$3K#@R said:
All those steps are correct if you are about to flash a leaked jb rom
If its a leaked custom jb rom,then you need to flash it through cwm
Click to expand...
Click to collapse
still am in stuck.
now i have N7000DDLR9 (ICS 4.0.4) without root. then i tried to flash N7000XXLS2 (LEAK) by PC-Odin, i am getting failed.
can you please explain step by step, how do from N7000DDLR9 (without root)
thanks.
musheercmr said:
still am in stuck.
now i have N7000DDLR9 (ICS 4.0.4) without root. then i tried to flash N7000XXLS2 (LEAK) by PC-Odin, i am getting failed.
can you please explain step by step, how do from N7000DDLR9 (without root)
thanks.
Click to expand...
Click to collapse
What was the error you got in the pc odin
paste the odin logs that show failed

[Q] How to update to stock ROM?

I have read:
http://forum.xda-developers.com/showthread.php?t=1424997
http://androidforums.com/galaxy-s2-international-all-things-root/578800-what-emmc-brickbug.html
http://forum.xda-developers.com/showthread.php?t=1693704
http://forum.xda-developers.com/showthread.php?t=1644364
My question: I have a SGN infected with the eMMC bug, and I want to upgrade it to the latest stock ROM. I know very little about flashing, and I know there are some risks when doing some things. I would like to know if the first link is safe for me, and which ROM I should use of the ones listed there (I live in The Netherlands). Do you guys have any tips or some guides made for the noobs among us?
that 1st link is the safest and best.
download the rom of. your choice. It. doesn't need to be of. your region. although you can check the latest firmware on www.samfirmware.com....
Once downloaded, use pc odin with the downloaded rom tar.md5 file selected in the pda tab. The connect the phone to pc in download mode and press start.
If you are upgrading to ics, then do not do any wipes, first flash a safe kernel...
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
that 1st link is the safest and best.
download the rom of. your choice. It. doesn't need to be of. your region. although you can check the latest firmware on www.samfirmware.com....
Once downloaded, use pc odin with the downloaded rom tar.md5 file selected in the pda tab. The connect the phone to pc in download mode and press start.
If you are upgrading to ics, then do not do any wipes, first flash a safe kernel...
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
:good:
by the way what's with nokiamodeln91 username.. hahahahaha.. you are in samsung thread.. hahahahaha.. but nice one man.. great help... keep it
nokiamodeln91 said:
that 1st link is the safest and best.
download the rom of. your choice. It. doesn't need to be of. your region. although you can check the latest firmware on LINK ....
Once downloaded, use pc odin with the downloaded rom tar.md5 file selected in the pda tab. The connect the phone to pc in download mode and press start.
If you are upgrading to ics, then do not do any wipes, first flash a safe kernel...
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks for replying. Good to know that that thread is safe, but what do you mean by flashing a safe kernel? Those terms mean nothing to me.
theres two way to flash ROM. 1 is using PC ODIN and the other one is CWM
Flashing Via PC ODIN .. you need to have two thing.. The Rom You Want to flash and the PC-ODIN software
Flashing Via CWM.. you need two things. You need to root your phone and you need to install CWM.
every rom comes with modem, kernel (the file that govern how to handle your phone cpu), csc... the kernel inside ics is known to have brickbug
theres no need to flash kernel if you are flashing Rom via PC ODIN... Flashing kernel is when you are using CWM....
mistajoe83 said:
:good:
by the way what's with nokiamodeln91 username.. hahahahaha.. you are in samsung thread.. hahahahaha.. but nice one man.. great help... keep it
Click to expand...
Click to collapse
tried a few usernames dint work. tried the Samsung too, na.. then nokia to the rescue.
Sent from my GT-N7000 using xda premium
mistajoe83 said:
theres two way to flash ROM. 1 is using PC ODIN and the other one is CWM
Flashing Via PC ODIN .. you need to have two thing.. The Rom You Want to flash and the PC-ODIN software
Flashing Via CWM.. you need two things. You need to root your phone and you need to install CWM.
every rom comes with modem, kernel (the file that govern how to handle your phone cpu), csc... the kernel inside ics is known to have brickbug
theres no need to flash kernel if you are flashing Rom via PC ODIN... Flashing kernel is when you are using CWM....
Click to expand...
Click to collapse
So, I can just flash any ROM using ODIN, and there will be no risk bricking my device?
If I flash a ROM, will I have a fresh install, and will my kernel also change so that I don't have the brickbug anymore?
hiddepolen said:
So, I can just flash any ROM using ODIN, and there will be no risk bricking my device?
If I flash a ROM, will I have a fresh install, and will my kernel also change so that I don't have the brickbug anymore?
Click to expand...
Click to collapse
yes you can flash any ROM using ODIN safely without bricking your device.
yes you will have a fresh install. your kernel will change too. as for the brickbug....
If you flash via PC ODIN then everything is stock to what you flashed.the kernel the firmware the csc the modem..all as stock provided....
1.If you flash ICS via PC-ODIN then your kernel also would be stock ics kernel that has brickbug..
Warning :
Don't wipe anything from stock ICS recovery
Don't factory reset/Hard reset on stock ICS.
Don't flash any Wipe version of ICS ROM
let say you want to flash Latest JB Rom but you are on ICS stock.
first thing you need to do is root your device ...install CWM.. Flash safe kernel
http://forum.xda-developers.com/showthread.php?t=1329360
let say ive rooted... installed CWM with safe kernel...
what i always do is everytime i want to flash new rom whatever rom it is...i flash Speedmod 3-15 (safe kernel) and go to Advance>reboot recovery and flash any rom i want so that im on the safe side without worrying what kernel im on.
2.If you flash GB than your kernel will be GB kernel which is safe to wipe..
if you want to flash custom rom from gb then you root your device and installed CWM and Flash since GB kernel is safe.
but.. let say u flashed ICS and wanted to go back to GB. then you are not safe anymore,,, that is why i always flashed Speedmod kernel 3-15 (safe kernel) and reboot recovery (by going to advance>rebootrecovery) and flashed any rom... that way im always sure that im in safe kernel when flashing Rom
mistajoe83 said:
yes you will have a fresh install. your kernel will change too. as for the brickbug....
If you flash via PC ODIN then everything is stock..If you flash ICS via PC-ODIN then your kernel also would be stock ics kernel that has brickbug.. if you flash GB than your kernel will be GB kernel which is safe to wipe..
Click to expand...
Click to collapse
Thanks so much, you are an incredible help. Slowly, I begin to understand everything !
hiddepolen said:
I have read:
http://forum.xda-developers.com/showthread.php?t=1424997
http://androidforums.com/galaxy-s2-international-all-things-root/578800-what-emmc-brickbug.html
http://forum.xda-developers.com/showthread.php?t=1693704
http://forum.xda-developers.com/showthread.php?t=1644364
My question: I have a SGN infected with the eMMC bug, and I want to upgrade it to the latest stock ROM. I know very little about flashing, and I know there are some risks when doing some things. I would like to know if the first link is safe for me, and which ROM I should use of the ones listed there (I live in The Netherlands). Do you guys have any tips or some guides made for the noobs among us?
Click to expand...
Click to collapse
You can download any stock rom you want from searching it on the forum then you can flash it through ODIN using your computer

Categories

Resources