Database Develop

Quadrant score question from a new user

Hello everyone!
I am a new O2x user and I just decided to install Topogigi Rom.
I installed version 2.0 with sp1 sp2 and sp3.
Baseband 0725.
I applied Supercharger with option 6. That is Hp512 Leaded (balanced)
All went smooth and painless.
Thanks Topogigi!
My question came when performing the Quadrant standard test.
My score was of 2751.
After reading scores from other users, I feel that 2751 is quite low, as some people appear to be able to reach 3000+ with standard 1ghz clock speed.
I am wondering if I did something wrong.
My device is not overclocked as I still don´t know how to set it up for that yet.
Thanks in advance for the help!.
P.S: Tried to post on Topogigi thread but it seems I dont have permission for that.
If this can´t be asked here, please feel free to delete or move my post..

did you wiped cache while installing Service packs?
if you wiped it , you lose the tweaks topogigi made ...

Yes I am afraid I did that
I followed an external tutorial where they adviced to do it.
How can I solve this?
Should I flash again sp2 and then sp3? or do I have to flash the whole rom from the beginning?
Thanks!

BlueWolfJK said:
Yes I am afraid I did that
I followed an external tutorial where they adviced to do it.
How can I solve this?
Should I flash again sp2 and then sp3? or do I have to flash the whole rom from the beginning?
Thanks!
Click to expand...
Click to collapse
Sp3 is just an update to have framework compatible with uot kitchen. Try to flash sp2 again. And before that perform at least 3 benchmark, performance is often best at third try. And remember that benchmark is just... benchmark, as long as your real user experience is good, you don't have to bother about scores. .

I flashed sp2 and now I am getting results a little bit over 3000..
My problem now is that market says that I dont have space in the device whenever I want to install an app.
Reading in Topogigi forum, people seem to solve this issue by just rebooting, but in my case it doesn´t matter how many times I reboot, the market keeps telling me the same error.
The only solution I found is to do a factory reset but that clears the cache and then I loose those tweaks made to the rom that makes it faster.
I agree with not paying much attention to benchmarks but I would like to have a fully functional rom if possible.
Thanks for your help, it is much appreciated.

Relating to your problem about the market, try to clear data for market in manage apilcation before you reboot next time, it worked for me
Sent from my LG-P990 using XDA App

Thanks Supupa.
I tried that but it didnt work.
Apparently the only way for me is to delete cache.
I have solved indirectly the problem when I flashed the new HP Rc4 Kernel.
I wipe the cache so that Market works and then when I flash the Kernel I get the desired benchmark results.
I am now achieving consistent 3477 results without OC and everything seems to work correctly (Market, GPS, data, etc..)
I still have to test battery life though.
One curious thing I found is that if I use the supercharge script with this Kernel, I get lower scores (around 2900).
Should I still supercharge my device?
Thanks for the help, all this is very new for me.

BlueWolfJK said:
Thanks Supupa.
I tried that but it didnt work.
Apparently the only way for me is to delete cache.
I have solved indirectly the problem when I flashed the new HP Rc4 Kernel.
I wipe the cache so that Market works and then when I flash the Kernel I get the desired benchmark results.
I am now achieving consistent 3477 results without OC and everything seems to work correctly (Market, GPS, data, etc..)
I still have to test battery life though.
One curious thing I found is that if I use the supercharge script with this Kernel, I get lower scores (around 2900).
Should I still supercharge my device?
Thanks for the help, all this is very new for me.
Click to expand...
Click to collapse
If your looking for high quadrant scores then dont worry about supercharging your phone if your getting low scores, though if you would like better multitasking and memory management do it (;

BlueWolfJK said:
Hello everyone!
I am a new O2x user and I just decided to install Topogigi Rom.
I installed version 2.0 with sp1 sp2 and sp3.
Baseband 0725.
I applied Supercharger with option 6. That is Hp512 Leaded (balanced)
All went smooth and painless.
Thanks Topogigi!
My question came when performing the Quadrant standard test.
My score was of 2751.
After reading scores from other users, I feel that 2751 is quite low, as some people appear to be able to reach 3000+ with standard 1ghz clock speed.
I am wondering if I did something wrong.
My device is not overclocked as I still don´t know how to set it up for that yet.
Thanks in advance for the help!.
P.S: Tried to post on Topogigi thread but it seems I dont have permission for that.
If this can´t be asked here, please feel free to delete or move my post..
Click to expand...
Click to collapse
1. install Andrev OC Adjuster From TrymHansen, a wonderful GUI for overclok daemon http://forum.xda-developers.com/showthread.php?p=18273457#post18273457
2. set the wake CPU clock to 1,4GHz. save & apply setting.
3. run Quadrand a few times without exiting until the scores are stable.
this is what I got using Topogigi's ROM:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

i would suggest using antutu, much more detailed tests !
quadrant is quite outdated ...

75markus said:
i would suggest using antutu, much more detailed tests !
quadrant is quite outdated ...
Click to expand...
Click to collapse
which sd did u test in the screenshot? i cannot get more than 5Mbps for the SD tests.

shpapy said:
which sd did u test in the screenshot? i cannot get more than 5Mbps for the SD tests.
Click to expand...
Click to collapse
internal one ...

75markus said:
internal one ...
Click to expand...
Click to collapse
That's fast I get about 5mbps are you on ext3 or 4? Did you run some optimization on the card? Thanks
Sent from my LG-P990 using XDA App

shpapy said:
That's fast I get about 5mbps are you on ext3 or 4? Did you run some optimization on the card? Thanks
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
ext4 (using CM 183), vorkkernel + ext4 flag
not really using any sd card optimizations ( are there any ?)

X
75markus said:
ext4 (using CM 183), vorkkernel + ext4 flag
not really using any sd card optimizations ( are there any ?)
Click to expand...
Click to collapse
Only changing cache siZe from my knowledge I also got ext4 and any kernel I tried couldn't score more than 5 hmmm super strange
Thanks again
Sent from my LG-P990 using XDA App

shpapy said:
X
Only changing cache siZe from my knowledge I also got ext4 and any kernel I tried couldn't score more than 5 hmmm super strange
Thanks again
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
well, i changed my partition size some time ago ...
you think this improves sd card speed ?
you can find all information in my signature...

Thanks guys I will try the options you suggest for overclocking my device.
So far I am very happy with my Topogigi rom, all seems to work perfect.

[INIT.D SCRIPT][OverClock] init.d Script for tekahuna's OMAP4 Overclock Modules

init.d Script to load tekahuna's OMAP4 Overclock Modules
by: frostincredible
Disclaimer: You are responsible for your own device. If you do something to it then blame me, I shall laugh at you.​
Requirements:
-OMAP4 Device
-tekahuna's "symsearch.ko" and "opptimizer.ko" modules
---(instructions at link in step 1)
-Rooted
-CWM (or CWM compatible recovery)
-ROM with init.d support (stock OEM ROMs do not support init.d, if on an OEM ROM go here: http://forum.xda-developers.com/showthread.php?t=1294009)
Instructions:
1. Go here and install tekahuna's overclock modules (these are NOT included in the ZIPs found on this page, you must download them from HIS site): http://rootzwiki.com...fficial-thread/
2. Follow his instructions only up to stage 5.
3. Download the ZIP corresponding to the speed you want to run. (e.g. 1100MHz = 1.1GHz).
4. Place ZIP on SDCARD
5. Boot into CWM (or other compatible recovery, stock will NOT work).
6. Flash ZIP
7. Reboot and open a 3rd party app such as ROM Toolbox or SetCPU and move MAX slider all the way up, should be running now at speed of the ZIP you flashed.
ZIPs: (The 1.0GHz is to go back to stock)
1000MHz (1.0GHz) ----- http://dev-host.org/...0GHz-signed.zip
1100MHz (1.1GHz) ----- http://dev-host.org/...1GHz-signed.zip
1200MHz (1.2GHz) ----- http://dev-host.org/...2GHz-signed.zip
1225MHz (1.225GHz) -- http://dev-host.org/...5GHz-signed.zip
1250MHz (1.25GHz) ---- http://dev-host.org/...5GHz-signed.zip
1275MHz (1.275GHz) -- http://dev-host.org/...5GHz-signed.zip
1300MHz (1.3GHz) ----- http://dev-host.org/...3GHz-signed.zip
1400MHz (1.4GHz) ----- http://dev-host.org/...4GHz-signed.zip
1500MHz (1.5GHz) ----- http://dev-host.org/...5GHz-signed.zip
Thanks:
tekahuna for starting this idea with his Overclock modules.
wildstang83 for teaching my scripts back when I was on the Incredible.​

Will this method of overclock reset after reboot?
Which is most stable?

Thanx for posting this find
I've tried other overclock methods and didn't quite like it because the cpu have to set to run full throttle at all times I'm order to achieve the Oc
I'd just tried a few of the zips already so here my findings
1.5 = very slow boot up, very unresponsive, hugh decrease on antutu " 2150 "
1.4 = still very slow boot up, very unresponsive but it still a little bit better than 1.5, antutu " 2475 "
1.3 = can't even boot up, it will reboot instantly so can't do any other testing
1.275 = boot up is much quicker than 1.4 & 1.5 feels almost like stock 1.0 boot up, screen is very responsive but it'll random reboot after 1-5 mins, I tried it 3x and it rebooted everytime so I guess it not stable at all
1.250 = feels like 1.275 bit much more stable, haven't run into any issues yet, no random reboot, no lag, no screen freeze, so far so good, antutu 5889
My base line antutu is 5000-5250
Haven't tried anything below 1.250 so can't write any review for it yet but as long as 1.25 is running smooth I think anything below 1.25 would be fine
The sweetest thing I like about this modd is my cpu doesn't have to be running full speed for the Oc to be effective and it'll survive reboot without any other modding
Not sure how this will affect battery life but I'll keep track of it
So far my bionic is on a manual 5.9.901 update running safestrap Eclipse 901 compatible rom with 901 lib files
Thanx again frostincredible for posting this mod

tekahuna now has beta 2 versions up that include voltage changes and an additional line to be added in terminal; do these work with those and if so how do you go about changing the voltage since that is past step 5 in his directions?

Well, I tried the 1.250 ghz and am stuck in a bootloop. awesome!

I tried the .02 newer files to system/lib/modules and do it with terminal and it didn't work
Then tried to flash the 1.250 zip and that didn't work either
So I copy back the .01 files then reflash the 1.25 zip then it worked again
I guess we need different 1.250 flash zip for .02 to work

bgs_piece said:
Well, I tried the 1.250 ghz and am stuck in a bootloop. awesome!
Click to expand...
Click to collapse
Did you tried other speeds?
I think 1.2 would work fine for you then since 1.25 didn't
I've been on 1.250 for 2 days now and still haven't have any issues yet and it's still very stable for me
It also drain the battery quite fast too

bhp117 said:
Did you tried other speeds?
I think 1.2 would work fine for you then since 1.25 didn't
I've been on 1.250 for 2 days now and still haven't have any issues yet and it's still very stable for me
It also drain the battery quite fast too
Click to expand...
Click to collapse
Luckily I had the 1.1,1.2 and 1.25 zips on my sd card so I was able to boot into clockwork and flashed the 1.2 and everything seems fine. I wouldn't have thought the extra .05 ghz would make that much of a difference, but apparently it did. I wonder if it was the uneven number doing it; I'm scared to try the 1.3 so I think I'll stay on 1.2.
When I had the original droid that was set at 600mhz I overclocked that to 1.4 ghz with no problems. Too bad this won't accept as large of an increase.

My lg revolution can go up to 1.9 that's 900 over stock
I guess its the voltage that can help alot on how high it can go
Too bad the voltage control version didn't work
Hope someone can figure that out

Hey frost incredible
Can you make new zips for the .02 versions?
Thanx

Is this overclocking both cores?

It seems that way
When I use system tuner to monitor cpu usage it shows cpu0 and cpu1
Cpu0 will run most of the time and vary from 300 - 1200
Cpu1 will run less frequently only when needed and vary from offline/inactive - 1200

If you overclock too much, the cpu will get quicker at high temperature and will force decrease the frequency. It's probably why performance is lesser when too high overclock.
the thermal policy will help not achieving thermal runaway, but if high opp is at a too high frequency, you will hardly not stay at this frequency.

quick question, once i get the opptimizer.ko and other .ko files do i need to run them through terminal?
I only ask because I just tried this and after I hit su I get superuser permission but the following commands say not valid.
Any tips?
Or do I need to just place the .ko files in the proper directory them flash the zip through recovery to get this to work?
edit: just re-read the directions and I see this should work without terminal. Just making sure before I boot loop this sucker. I'll make a full backup and report back.
---------- Post added at 06:31 PM ---------- Previous post was at 05:33 PM ----------
Wow! Just flashed 1.25 and worked without a hitch.
Just hit 6150 on antutu benchmark!
Not bad.
I'll continue to run this to see how stable and check bat life and report back.
Then maybe try some other frequencies.

1.3 is running good on my bionic. Not a bad benchmark. Def a little more pep.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my DROID BIONIC using xda premium

So far I've tried;
1.5 (really slow and had to reboot)
1.3 (screen freeze and reboot)
1.275 (screen freeze and reboot)
1.25 (screen freeze and reboot)
That was as of about 2 minutes ago. I'm thinking my phone doesn't want to be overclocked.
I am going to try 1.225 and if that fails 1.1 (at that point, whats the point?)
Will update...
It didn't take long,
Found that 1.225Ghz works great on my phone (like everything else each one is different). Flashed the zip, rebooted set SetCPU to 1.225, set on boot, rebooted again, Bob's your uncle and it works great!
Quadrant score went from 2300ish to 2700ish. Good by terms.
Thank you for making these things so simple!

just one issue, I was getting and intermittent sound issue after flashing 1.3 and 1.25 oc zips, my ringer, alarm and music player would not work, as in no sound from the speaker.
I flashed back to 1.0 and no problems yet today.
Maybe just a quirk on my device.

could someone please pritty please post a video of step by step on overclocking the bionic? i've tried everyway possible to my ability to o/c but still can't o/c.... thank you i would greatly appreciate it and i'm sure others would too

[Driver] Qualcomm S3 Adreno 220 GPU ICS Flashable Update {UnSigned}

This Adreno GPU update is ONLY designed to work on ALL Qualcomm S3 ARM7 Devices running ICS.
Greetings, I have been on XDA for a long time and I hope that you all can benefit from this patch as we have over at the Amaze Forums. Here is a link to my Original Thread and evidence of this patch's success for our Qualcomm S3 Adreno 220 GPU devices running ICS.
We have proven that this driver Patch has doubled our GPU throughput for 2D and 3D rendering.
http://forum.xda-developers.com/showthread.php?t=1631223
I have only tested this on my T-Mobile HTC Amaze (Qualcomm S3 Adreno 220 GPU) and have not experienced any issues.
I have created this Recovery Flashable Patch to Install the Qualcomm Updated Adreno Drivers on the "Official Ruby ICS" release.
Qualcomm Developers Website
I did not get a screenshot of the results before flashing this, however I have seen dramatically improved result on my Quadrant 3D scores with "Force 2D GPU rendering" UNCHECKED in the Setting->Develop Options Menu of this ICS Release. With this option checked I have seen improvements on both 2D and 3D. Although results are slightly degraded for 3D from post update the 2D results have doubled in value.
Quadrant results were obtained immediately after restart to avoid any other processes interfering with the results.
AFTER "Adreno ICS Update" Screenshot 2D Rendering NOT checked.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AFTER "Adreno ICS Update" Screenshot 2D Rendering CHECKED.
If someone would post a screenshot of the before Quadrant result I would gladly add it to this post. Please only post results Immediately after restart for conformity.
Android Ice Cream Sandwich Required
Root Required
Pre Requisites fulfilled (Root) (ICS)
Install "Adreno ICS Update" to the root of your SD Card
Toggle Signature Verification in Recovery
Install zip via Recovery
Fix Permissions
Reboot
ENJOI!!!
Thank you dhkr234 for the flashable zip framework.
Please post any other tested configurations and I will add them for other community members reference.
The usual warning goes here. I'm not responsible for what you do, or how you execute, use this at your own risk!

Additional Configurations Tested
Additional ROMS with confirmed improvements:
ROMS with these NEW Adreno Drivers Baked in:

Here's my results not huge but definitely a improvement. There dosnt seem to be any ill efects yet.
good job!
3rd Picture with 2d rendering on

1987dram said:
Here's my results not huge but definitely a improvement. There dosnt seem to be any ill efects yet.
good job!
Click to expand...
Click to collapse
Try this now with 2D rendering enabled. I will bet you double your performance. Besides this will try improve the performance of the Android UI.
Please post your result with the 2D rendering enabled.
Cheers,
gjcamp
Sent from my HTC_Amaze_4G using xda premium

Results on Dark Raider with Kozmik beta 6 kernel. Definite improvement with 'Force 2D Rendering' checked. But only in the 2D tests. Quadrant scores below.
Stock: (No 'Force 2D Rendering')
Overall - 3726
2D - 546
3D - 2232
this.Adreno Drivers: (No 'Force 2D Rendering')
Overall - 3682
2D - 560
3D - 2093
this.Adreno Drivers: (With 'Force 2D Rendering')
Overall - 3664
2D - 990
3D - 2232

Not to shabby
Sent from my HTC PH39100 using xda premium

Has anyone given this a shot with De-Sensed or Virtuous?
im about to give it a shot
EDIT:
I loaded up Virtuous latest version and gave it a shot
nothing else installed on the phone but the cleanly installed rom and quadrant/antutu
quadrant showed improvement but antutu did not show any improvement
first 2 are without forced 2d rendering
last 2 are with forced 2d rendering

I got the same score with antutu and virtuous as well didn't run quadrant
Sent from my HTC PH39100 using Tapatalk 2

My scores dropped pretty low, while my 2D did improve my 3d drastically dropped pretty low....And I have force 2d rendering checked...

Not sure what this does , I seem to have less of the android lag
In b4 I get my ass chewed up for that
Sent from my HTC PH39100 using XDA

W/signature toggle enabled I'm getting zip verification failed installation aborted what could I be doing wrong? Lol in root of sdcard and ex sdcard also both downloads folders
Sent from my HTC PH39100 using XDA

ENvisiNKeD said:
W/signature toggle enabled I'm getting zip verification failed installation aborted what could I be doing wrong? Lol in root of sdcard and ex sdcard also both downloads folders
Sent from my HTC PH39100 using XDA
Click to expand...
Click to collapse
Toggle Signature Verification OFF
Thank you,
gjcamp

Installed on my lg optimus lte with no issues.
Do I have to flash this after I flash each nightly update? Or is just the once fine?
Sent from my LG-P930 using XDA

hereric said:
Installed on my lg optimus lte with no issues.
Do I have to flash this after I flash each nightly update? Or is just the once fine?
Sent from my LG-P930 using XDA
Click to expand...
Click to collapse
after every update you should have to reflash this file unless the nightly implemented this mod into their rom...

Excellent, increased the video on my Vivid an 80 or more %
Recommended, installed with no issues
Sent from my HTC Raider X710e using XDA

What do you mean help increase video??? just curious
Sent from my HTC PH39100 using Tapatalk 2

I got it to surpass 1000 2D with the latest KozmickKick RC2 and this w/ rendering checked I am unable to post screenshots not the right JPEG blah blah blah but I enjoy using this for games a lot
Sent from my HTC Vivid ICS 4.0.3 Sense 3.6
on Dark Raider Rom using Kozmickkick's OC kernal using XDA

[ROM] English (!) MIUI 2.3.7 RC0 with wifi fix

You may have seen the other MIUI thread on here, but unfortunately a lot stayed in chinese even if you changed the language to English.
Feed3 translated most of the apk's, and I included english versions of Root Explorer and the default gingerbread keyboard as well.
This ROM does NOT format the /data/ partition like the original ROM does. This way you can flash this ROM over your older MIUI installation.
IF YOU'RE COMING FROM ANOTHER ROM (LEGENDFUSE, CM7, ...) YOU HAVE TO WIPE YOUR PHONE FIRST!
Thus, if you want to fix the wifi errors from the original ROM, just flash this over your previous rom, your data will be preserved.
I'm using this rom right now so it's working fine!
Changes:
Added: Google apps are now installed automatically
Fixed/Changed: /Data/ partition is preserved, you can just flash this ROM over your old MIUI rom.
If you want to flash this rom over a non-miui ROM, do a full wipe first. Don't forget to do a nandroid backup first!
Fixed: English Root explorer instead of Chinese one
Fixed: English MIUI Music app instead of Chinese one
Fixed: Wifi rebooting issues
NOTE1:
The first time you'll start this ROM, it will be in chinese. Just follow these instructions to set it to english:
PJ.C said:
miuiLauncher , MENU button ->设置(Setting)->系统(System tab)->语言和输入(Language and Input)->选择语言（Choose Language）-> Choose English.
Click to expand...
Click to collapse
NOTE2:
I did not make this ROM, I only made some changes to the updater script and some files. All credit goes to the maker of this ROM (Cofface) and to the people that translated the .APK's (feed3)
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
Download (including gapps): http://dl.dropbox.com/u/1424119/cofface_legend_miui2.3.7_RC0_app2sd_gapps.zip Seems to install some apk's more than once. Install at own risk
MD5: 56b0f7da005d54098aed84d59a10c46b
Download (without gapps): http://dl.dropbox.com/u/1424119/cofface_legend_miui2.3.7_RC0_app2sd.zip
Google Apps: http://goo.im/gapps/gapps-gb-20110828-signed.zip
MD5: 37cf90ef6ac595109f26faacb2fdc1aa
Link to original ROM (Chinese!): http://bbs.anzhi.com/forum.php?mod=...=page=1&filter=typeid&typeid=5785&typeid=5785

wow great job, i will give it try, thank u

anyone did any benchmarking on these roms?

farukb said:
anyone did any benchmarking on these roms?
Click to expand...
Click to collapse
I'll do so now. Quadrant?
The ROM feels very snappy though, everything is very fast.
EDIT: The quadrant score is pretty bad, I didn't expect that. The rom really works fluently :/
What really counts is the actual speed, quadrant is just a crappy benchmark.

try antutu,i just did a benchmark on my current rom, just so we can compare it with this one
CM7.2 RC3 @600MHz did:
total score: 1338
cpu: 330
gpu: 658
ram: 86
i/o: 264
DETAILED:
ram: 86
CPU integer: 187
CPU float-point: 143
2D graphics: 264
3D graphics: 394
Database IO: 145
SD card write: (2.6 MB/s) 26
SD card read: (9.3 MB/s) 93
and after a reboot:
total: 1357
ram: 91
CPU integer: 188
CPU float-point: 141
2D graphics: 298
3D graphics: 390
Database IO: 130
SD card write: (4.7 MB/s) 47
SD card read: (7.2 MB/s) 72

AnTuTu default speed (Ondemand, 600 MHz max): 1303

Corman- said:
AnTuTu default speed (Ondemand, 600 MHz max): 1303
Click to expand...
Click to collapse
very nice indeed!
can you, please, go to scores tab and provide us with detailed scores ? so that we can compare what actually works better and what doesn't. thanks

After a reboot to start afresh, I now get 1375. I'm using a class 4 SD-card.
RAM: 91
CPU integer: 187
CPU float-point: 142
2D graphics: 295
3D graphics: 374
Database IO: 145
SD card write: 38
SD card read: 103
245-600MHz ondemand

maybe if it would be completely gpu rendered like ics it would be a great aquisition

guys what about gapps? it not works on my legend,i have only loading bar on market

i just tried to flash the rom and keep the data from cm7.2 (i formated system and cache)...and it works...the system boots, sees the apps etc....but i can't even open contacts (although some apps seem to work), i get million FCs, almost for everything i try to do....so, i'll try a clean installation and see if this was because the old data, or the rom.
EDIT: no FCs after fresh flash

Is ist right, the Dalvik cache is mounted at /cache instead of /sd-ext?

@ OP "car home" icon appears twice (maybe just the icon, maybe the whole app)

when I flash the rom i have only 15 mb of internal memory free. how can i fix this?

anbublackops said:
when I flash the rom i have only 15 mb of internal memory free. how can i fix this?
Click to expand...
Click to collapse
same.. seems like sdext is not detected or something :S
also having the car home twice after install

farukb said:
@ OP "car home" icon appears twice (maybe just the icon, maybe the whole app)
Click to expand...
Click to collapse
Hmm, looks like including the gapps in the ROM f*cked up some things indeed.
For now, just install the regular version and flash Gapps separately :/
farukb said:
i just tried to flash the rom and keep the data from cm7.2 (i formated system and cache)...and it works...the system boots, sees the apps etc....but i can't even open contacts (although some apps seem to work), i get million FCs, almost for everything i try to do....so, i'll try a clean installation and see if this was because the old data, or the rom.
EDIT: no FCs after fresh flash
Click to expand...
Click to collapse
You need to do a full wipe if you're not coming from a MIUI rom before. Just do a wipe data/factory reset and it should work.
BTW, I managed to get a score of 1755 in AnTuTu.
For some reason it deleted the details though. I did overclock to 825 Mhz to get this result.

Mavamaarten said:
Hmm, looks like including the gapps in the ROM f*cked up some things indeed.
For now, just install the regular version and flash Gapps separately :/
Click to expand...
Click to collapse
seems so, i can't even install gmail...says insufficient space, although i have more than 100mb free, and can install other apps (both from market and sd)
Mavamaarten said:
You need to do a full wipe if you're not coming from a MIUI rom before. Just do a wipe data/factory reset and it should work.
Click to expand...
Click to collapse
you said you didn't try to flash it over existing cm7 data,so i tried it for you, and the feedback was mentioned above...

farukb said:
seems so, i can't even install gmail...says insufficient space, although i have more than 100mb free, and can install other apps (both from market and sd)
you said you didn't try to flash it over existing cm7 data,so i tried it for you, and the feedback was mentioned above...
Click to expand...
Click to collapse
Yeah, I figured it could work because this ROM is based off CM7...
Anyways, I'm having this problem too and I'm working hard to fix this. The only thing you can do at the moment is back up your stuff using MyBackup and do a clean install (with wipe!) with Gapps in a separate .zip...

seperately installing gapps fixed the problem with insufficient space
although i noticed that widgets are oversized for me :S

Does anyone else have this problem: When i start Viber it crashes and sends a report everytime.

[Kernel] Phenomenal 4.0 Jelly Bean - More Battery Need To Find Iphoners Missings!

Since my first phenomenal release (for galaxy s2 gingerbread) my first goal was: not so much tweeks, but BATTERY LIFE.
Phenomenal had a great success for galaxy s2 and for galaxy s3. Integrated Undervolting approach likes to many people, and for the first time (thanks to 3 versions) every user can use the most stable version that save more battery on own device, though
not many users don't know nothing about undervolting or don't know how set.
BUT the main problem in galaxy s3 is: stock galaxy s3 kernel has already a good battery life, so many people think: If stock has a good battery that guarantees to use phone for one full day, why must I use a custom kernel?
NOW THERE IS A REALLY IMPORTANT REASON!!!!
The new but obsolete maps of apple can lose people!!!
So main idea is: use your phone as you do usually;
use the extra battery given by phenomenal to find your iphoners friends!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to use:
Install Phenomenal Kernel using CWM recovery (zip version) or ODIN (tar version)
Use your phone as you do usually
When an iphoner lost, use phenomenal extra battery to find him
Run google maps and save your friend!!!
PHENOMENAL, THE BEST BATTERY EVER!
How ever,we have 3 versions: Normal, Medium, Extreme.
Why 3 versions? Because every version has a set of different voltages. Not all cpu are the same, so choose what is better for your phone. If voltages are not supported by your phone, your phone will be freeze (you must remove battery....this is not dangerous for phone).
What version use?
If you don't want try which is best for your phone, install Normal version that is stable for all phones.
If you want find your best version, install extreme...if your phone works good and doesn't freeze, keep this; if not install medium. Again, if your phone works good with medium and doesn't freeze, keep this; if not install normal
Battery life: Extreme > Medium > Normal > Stock
Stability: Stock = Normal > Medium > Extreme
YOU DON'T NEED TO SET ANITHING!!!! VOLTAGES ARE BUILD IN!!
I SUGGEST TO WIPE CACHE AND DALKIK CACHE AFTER INSTALLING KERNEL.
THIS KERNEL IS ONLY FOR JELLY BEAN GALAXY S3 SAMSUNG BASED ROM!!!
CHANGELOG 4.0
Based on samsung update 5 Jelly Bean
Ramdisk from XXDLIB
Insecure kernel
Disabled various logs, traces and debugs
All working modules (also exfat)
Various integrated undervolting:
Extreme:
cpu arm : -125mv to all freq
cpu internal: -50mv to all freq
bus: -100mv to all freq
gpu: -100mv to all freq
CWM: http://dl.dropbox.com/u/33360162/phenomenalGS34.0/Phenomenal4.0Extreme.zip
ODIN: http://dl.dropbox.com/u/33360162/phenomenalGS34.0/Phenomenal4.0Extreme.tar
Medium:
cpu arm : -100mv to all freq
cpu internal: -50mv to all freq
bus: -100mv to all freq
gpu: -50mv to all freq
CWM: http://dl.dropbox.com/u/33360162/phenomenalGS34.0/Phenomenal4.0Medium.zip
ODIN: http://dl.dropbox.com/u/33360162/phenomenalGS34.0/Phenomenal4.0Medium.tar
Normal:
cpu arm : -75mv to all freq
cpu internal: -50mv to all freq
bus: -50mv to all freq
gpu: -50mv to all freq
CWM: http://dl.dropbox.com/u/33360162/phenomenalGS34.0/Phenomenal4.0Normal.zip
ODIN: http://dl.dropbox.com/u/33360162/phenomenalGS34.0/Phenomenal4.0Normal.tar
MIRROR FOR ALL VERSIONS:
http://www.mediafire.com/?7fzgpmmm932ae9q
OTHER MIRROR:
http://zantekk.de/host/upload/Phenomenal4.0Normal.zip
http://zantekk.de/host/upload/Phenomenal4.0Medium.zip
http://zantekk.de/host/upload/Phenomenal4.0Extreme.zip

ONLY FOR DEVELOPERS
Phenomenal 4.0 base sources
http://dl.dropbox.com/u/33360162/phenomenalGS34.0/phenomenalGS34.0Sources.tar.gz
Updates sources for normal, medium, extreme
http://dl.dropbox.com/u/33360162/phenomenalGS34.0/updatePhenomenal 4.0.zip

OMG fenomen, TY for you hard work, i have been waiting this kernel

Cant wait to try it. Was only waiting for a good kernel to switch to jelly bean.
Now i will give it a try and report back
Thanks for ur hard work... appreciated as always!
Sent from my GT-I9300 using xda premium

awesome
Sent from my omega jellybean powered sgs 3

Finally mate, thank u
Sent from my iPhone Fu**er S3 using CyanogenMod10

thnx man for ur great Kernel
but wt do u mean by update for Extrem,,etc
in the 2nd post ?!
Sent from my GT-I9300 using xda app-developers app

Hi man glad u are back i just bout u a ber te saluto amico....
1YK5279868811441M
P.S. Should we aplay the update from secound post after installation or no?

m4ever007 said:
thnx man for ur great Kernel
but wt do u mean by update for Extrem,,etc
in the 2nd post ?!
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Are only sourcrs for developers

fenomeno83
I've been waiting, and as expected the Phenomenal extreme runs really smooth and fast. Really great work and thanks for your great work.
On ExTweaks or sTweaks I can probably do without the settings under extreme, right?:laugh:

Great! Hahahahahah
Yes mate i will use extra battery life for find my apple friends
Thanks for this new must have
Edit
Soon coming test
XXDLIB H3G Roma
CheckRom v5.5 - Jelly Bean
Inviato dal mio iPhone ****er (GT-I9300)

Tried extreme - froze on boot. Medium is working so far. I think battery life is good.
Exfat with 64gb works great.
Sent from my GT-I9300 using xda premium

Thanks for this!! Can't wait to try it. Does anyone have any comparisons to siyah? I know siyah offers more options - but which gives better battery life?
Can i use STweaks with phenomenal?

I don't see any difference. First stock and then phenomenal medium.

Thankssssssssss
Inviato dal mio GT-I9300 con Tapatalk 2

No diffrent here between v4 medium and stock kernel
Sent from my GT-I9300 using xda app-developers app

worth the try, but is it really significant?

Mind if I ask you if you're gonna release this for cm10 ROMs? Thanks before hand
Enviado desde mi GT-I9300 usando Tapatalk 2

Whoa!!! It's here!
Thanks mate! Downloading all and see which is able to withstand the pressure.
As for the difference between stock and this, you need run like a few full cycle before you are able to see the difference.
Sent from my GT-I9300 using xda app-developers app

Woot ! Thank you