I am using ICS LPF, since changed to Franco Kernel, I cannot connect to the WIFI network.
Anyone can help, thanks
Try the workaround in one post of the kernel thread for franco.Kernel.
A lot of people have problems with Wifi in this kernel.
Maybe this workaround will help you. Or you might change back to your original kernel.
Try to change it but doesn't work. Now going back to Abyss Kernel.
Reflash the modem - it worked with Franco for me. Check the sticky post for Modems and download and flash the one that suits your ROM.
eatout said:
Try to change it but doesn't work. Now going back to Abyss Kernel.
Click to expand...
Click to collapse
Abyss Kernel? Works only with GB ROMs.
You'll have to choose one of the kernels for ICS.
Related
Hi all,
I'm new to android and some things I do not understand, for example I have the galaxy captivate with the following characteristic:
Rom Android 2.3.4 I897UCKH3
boog_kh3_kernel3
su-2.3.2-efgh-bin-signed.zip
I updated my cellphone using these files, and all works fine but I wanted install a new kernel the last talondev, but after install it I think that my sgs is on soft bricked, displays the logo of AT & T and then starts "loading talon...", but then restarts.
This kernel can be used with the rom? it is compatible? or What should I do to choose a kernel?
Best regards
Talon is I9000 port kernel you are using native I897 rom. Use Samurai, Corn kernel or Boog's kernel. Actually Im not sure there is a corn or samurai kernel for KH3. I know they have it for KJ roms.
I have to find kernels for KH3, right?
Thanks
Correct. Or update to a newer leak like KJ3 as a example.
And I can change to a custom rom? or that such the cm7 rom?
I talk to do this to exit the soft brick and have it back.
thanks
CM7 has its own special instructions. I haven't kept up with it so go to their thread and read. But ya you can change to custom roms like Fusion IX, Fasty and others that are based of a newer firmware version.
RanuTo said:
And I can change to a custom rom? or that such the cm7 rom?
I talk to do this to exit the soft brick and have it back.
thanks
Click to expand...
Click to collapse
You need to flash back to boog kernel. If this does not work it is best you re-flash to stock KH3 with the one-click solution here. http://forum.xda-developers.com/showthread.php?t=1300843
Choose the one WITHOUT bootloaders since you already have those on the phone. It is safer that way.
Regarding CM7 ROMs. You must know they are completely different system compared to the normal Captivate ROMs. Read this thread before flashing:
http://forum.xda-developers.com/showthread.php?t=978150
Don't get me wrong. THEY ARE VERY GOOD CUSTOM ROMs...absolutely. But you cannot mix and match.....Follow CM7 instructions strictly.
thanks for the replies, I will be reading information about their opinions.
thank you very much , I'll let you know the results.
chappatti said:
You need to flash back to boog kernel. If this does not work it is best you re-flash to stock KH3 with the one-click solution here. http://forum.xda-developers.com/showthread.php?t=1300843
Choose the one WITHOUT bootloaders since you already have those on the phone. It is safer that way.
Regarding CM7 ROMs. You must know they are completely different system compared to the normal Captivate ROMs. Read this thread before flashing:
http://forum.xda-developers.com/showthread.php?t=978150
Don't get me wrong. THEY ARE VERY GOOD CUSTOM ROMs...absolutely. But you cannot mix and match.....Follow CM7 instructions strictly.
Click to expand...
Click to collapse
Why would you send him to the nightly page and not the 7.1 stable current nightlys are a bit broken.
I am not amused by your phones performance
Hi,
First of all I have to say I'm really a noob in flashing etc, but I'm trying to learn
I am interested in flashing the horsepower kernel.
I read in the Hp thread that it is only compatible with V20 l/j/g/i/c/e.
I check on my phone and I have V20m...
Is that going to be an issue ? I'm not interested in flashing a custom rom, I just want the extra performance So I'd rather keep the stock rom
And I also have a few questions about the kernel itself. Are there any downsides (apps that won't work, ...)? If ICS is released for the P990, can I just update or do I have to flash the original stock kernel back ? I also read of people that had troubles with baseband, is that something that is kernelrelated of romrelated ?
thx
Just flash the kernel and see what happens
If it doesnt work, restore your backup you made in recovery before you flashed
I've seen people complain that they can't play games like PES2012 with certain kernels.
I think when ICS comes out you can update regardless of what kernel you are using. From my understanding when you flash a rom you overwrite kernel and BB, so if you want a different kernel and BB you have to change that after you flash a rom, but you'll have to confirm this, I'm not sure this is accurate.
LarsPT said:
I've seen people complain that they can't play games like PES2012 with certain kernels.
I think when ICS comes out you can update regardless of what kernel you are using. From my understanding when you flash a rom you overwrite kernel and BB, so if you want a different kernel and BB you have to change that after you flash a rom, but you'll have to confirm this, I'm not sure this is accurate.
Click to expand...
Click to collapse
The ROMs which have Kernel built in....but then you can also use custom kernels which are used to optimize the performance of the device...and ROM flashing does not overwrite any BB....but yes...you have to flash through Smartflash method for changing a BB. Changing a BB will wipe the data for sure....but then after the flashing ROM you also need to change the RIL accordingly....
If you have the wrong baseband, can't you just flash the baseband that worked on the stock rom ?
Bochdalek said:
If you have the wrong baseband, can't you just flash the baseband that worked on the stock rom ?
Click to expand...
Click to collapse
According to Sreeprajay flashing a kernel will not change your BB, so you will keep stock BB.
LarsPT said:
According to Sreeprajay flashing a kernel will not change your BB, so you will keep stock BB.
Click to expand...
Click to collapse
you are right....else i would just flash a kernel for the ROM and jump to different BB for different ROMs....unfortunately it does not..... ;(
testing ROMs will become an exciting game...just a few mins
Hp Kernel
[SuperSonic]*[April-05]*[CM9-ICS KERNEL][RC1-R] Horse Power 2x ICS RC1-R [OTF
I've installed that kernel and I run Nova HD Rebuild 1.0.3, the problem is after I reboot it shows my baseband is unknown. What went wrong? Someone help?
Arthur93x said:
[SuperSonic]*[April-05]*[CM9-ICS KERNEL][RC1-R] Horse Power 2x ICS RC1-R [OTF
I've installed that kernel and I run Nova HD Rebuild 1.0.3, the problem is after I reboot it shows my baseband is unknown. What went wrong? Someone help?
Click to expand...
Click to collapse
You have been replied in PM. Check your PM
Sent from my LG-P990 using Tapatalk
Hi guys,
So I read the threads that warn us about the bricking problem from official XXLPY. And they also told us to flash another safe kernel right away to avoid anything bad happen. But I could not find anything about which kernel is safe to use with this rom (except some said to flash GB kernel, and I assume they don't work with ICS?). So I'm wondering if anyone please guide me to a kernel that is usable with XXLPY (how to guide would be preferred ?
I do not know too much about kernels so all I'm trying to do is to stay away from bricking and get CWM to run on my ICS note.
Thank you very much in advance,
Anyone?
minhqp107 said:
Anyone?
Click to expand...
Click to collapse
The new SpeedMod and Franco kernels MIGHT be safe. Time will tell.
Sent from my GT-N7000 using Tapatalk
The new franco r3 kernel might be safe as franco has disabled the emmc erase bug
Thank you guys, I just flashed franco r3 kernel. Could not tell if the problem was fixed, but now i'm left with a non-wifi galaxy note everytome i try to connect it just stays at "obtaining IP address...". And I found out that some others are aloso having the same problem as I do. Hoping for some help here cause I can't flash speedmod kernel (Idid but after reboot it's still Franco??? )
Use static IP address and it will work.
chasmodo said:
Use static IP address and it will work.
Click to expand...
Click to collapse
I could successfully flashed speedmod k3 using odin PC (don't know why mobile Odin did not work) and my wifi is working again, this kernel also disabled the emmc erase bug so I think I'm all good for now. Thanks anyway
CF root LPF works with me...
Sent from my GT-N7000 using xda premium
Im using franco kernel on LPY, fast kernel and without the eMMC superbrick bug.
does it have root?
Yesterday, my Note just wouldn't connect using WiFi. It is rooted and running the latest Franco kernel (no custom ROM's).. I tried to wipe using built in CWM, reinstall kernel, go back to Version r5 & lots of other potentially solutions by people having the same problem (With another device).
Why is this happening?
Can it be fixed?
Does anyone else have the same problem?
Please go easy on me. I'm not very skilled, but if there IS a solution to this, i'd be forever grateful!
What i have not tried yet,
-Reinstall Busybox,
-switching from WPA to WPA2 on my router
-flash a custom rom
How about a simple idea? Stop using franco's r6 kernel. Although I respect franco's work, the kernel is not IMO a work in progress that never happened... Sleep of Death, pixel salad and wi-fi/network problems plagued the kernel and this is likely to be the root of your problems.
I recommend gavin.lewarne's NoteCore/HydraKernel or hardcore's Speedmod kernel. They are superior in every way from franco's old kernels.
Look in Original Android Development for the threads.
:good:
Thanks man, works amazing!
npras42 said:
How about a simple idea? Stop using franco's r6 kernel. Although I respect franco's work, the kernel is not IMO a work in progress that never happened... Sleep of Death, pixel salad and wi-fi/network problems plagued the kernel and this is likely to be the root of your problems.
I recommend gavin.lewarne's NoteCore/HydraKernel or hardcore's Speedmod kernel. They are superior in every way from franco's old kernels.
Look in Original Android Development for the threads.
:good:
Click to expand...
Click to collapse
So i wiped and flashed Hydracore V1, and it works like charm! Thanks man, i don't know how to thank you enough. This was really helpful to me
The kernal is not good for u r phone..it may have some bugs.
Before doing anything
Update busybox to latest version.
Wipe cache but do not format
hi all
is possible to use cyanogenmod 10.1.3
with semaphore kernel 3.2.0 and modem Radio-CM7-ICS-KK4-Captivate-signed.zip ??
I am interested in KK4 modem
CM10.1 is Android 4.2.2 based ROM, Semaphore 3.0.0c is the right kernel.
Default CM10.1 UGKG3 modem works well in most places, why you want to change it?
I see mobile data works better with KK4 modem, in my country.
OK, I never had to change a modem, so wait for someone with more experience to answer this question.
Thanks for your comment
Val D. said:
OK, I never had to change a modem, so wait for someone with more experience to answer this question.
Click to expand...
Click to collapse
besembel said:
Thanks for your comment
Click to expand...
Click to collapse
Changing modem is probably the most basic thing when it comes to flashing. Your ROM/kernel and bootloaders don't depend on it.
So flash away, you can flash whichever you want and as many times as you want, all it affects is your connectivity.
BWolf56 said:
Changing modem is probably the most basic thing when it comes to flashing. Your ROM/kernel and bootloaders don't depend on it.
So flash away, you can flash whichever you want and as many times as you want, all it affects is your connectivity.
Click to expand...
Click to collapse
Ok tanks, i test kk4 ICS modem.
I should mention that you gotta flash the right modems zips. I believe it's the I9000 zips for the cappy (unless it changed since i last used my cappy).
Sent from my SGH-I747 using xda app-developers app
I flash this file Radio-CM7-ICS-KK4-Captivate-signed.zip and works perfectly