Hi Guys
I am upgrading to a SGS i9000. Previously had a Motorola Milestone, custom kernel is new to me.
I've been searching and couldn't find anything. I want to load gingerbread XXJVK and use SpeedMod Kernel. Will this cause any problems? If I do experience problems would it be straight forward to go back to stock kernel?
davekojo said:
Hi Guys
I am upgrading to a SGS i9000. Previously had a Motorola Milestone, custom kernel is new to me.
I've been searching and couldn't find anything. I want to load gingerbread XXJVK and use SpeedMod Kernel. Will this cause any problems? If I do experience problems would it be straight forward to go back to stock kernel?
Click to expand...
Click to collapse
Speedmod is a kernel designed to run with Froyo, not Gingerbread. Many custom 2.3.3 ROMs have you install Speedmod as an intermediary step just to get CWM installed, but it will not work with JVK. You will need to install one of the kernels specifically designed to support JVK.
I STRONGLY suggest you read the many threads posted here about JVK and the process of flashing to it, AFTER you have read the stickies about flashing ROMs on the i9000. Foreknowledge is always better than Support Calls.
rschenck said:
Speedmod is a kernel designed to run with Froyo, not Gingerbread. Many custom 2.3.3 ROMs have you install Speedmod as an intermediary step just to get CWM installed, but it will not work with JVK. You will need to install one of the kernels specifically designed to support JVK.
I STRONGLY suggest you read the many threads posted here about JVK and the process of flashing to it, AFTER you have read the stickies about flashing ROMs on the i9000. Foreknowledge is always better than Support Calls.
Click to expand...
Click to collapse
Thanks for the advice. I keep going back to the stickies about flashing ROMs to i9000. I guess I will keep reading.
I would wait for the release of Gingerbread . Once its released the devs are going to have a more complete set up to work with .
jje
There's no source to work from... so there's no speedmod as of now. Your best shot could be supercurio's hacked JVK kernel which can convert partitions to ext4. But remember, the rom is still a beta.
My SGS came today. I'm going to look at flashing darky's rom tonight.
I have Cyanogenmod7 RC3 on my milestone at the moment but I don't think I'll miss the 2.3 features.
Again thanks everyone for the advice
hi guys,
i'm a noob.
need some help over here.
i'm using galaxy S i9000.
i rooted my device with speedmod kernel k13e-500hz #36 but firmware is v2.2.
is theer anyway to upgarde to v2.3 with rooted kernel??
many thanks
Hey everyone, just a general question about flashing i9000 ROMs. Obviously they have quite a selection over there, and I was just wondering how one would go about porting and flashing them?
You'll need a reoriented kernel. Not too hard to come by, look for exaliburinhand's threads in captivate development
Sent from my SGH-I897 using XDA App
What if I'm flashing a 2.2 ROM? I don't want to mess with Gingerbread at the moment.
Xcal also has a reoriented kernel for 2.2. You can dl out from dev thread, or from SGS TOOLS (kernels are under rom tools).
Awesome. How would I use the reoriented kernel with the i9000 ROM? Just flash through CWM? And what if I want to flash a different kernel? (Onix, SpeedMod, etc...)
Put the redbend_ua and zImage files from the kernel in the updates folder of the rom zip. Overwriting the others. And flash the whole rom in cwm. One stop shopping.
I was thinking SGS Kernel Flasher (which I've used several times with good results).
mrhaley30705 said:
I was thinking SGS Kernel Flasher (which I've used several times with good results).
Click to expand...
Click to collapse
extra step thats not needed if you know what kernel/modem you want to use in place of whats in the rom zip
Ok, so can someone take me through flashing an i9000 ROM in semi-noob terms?
Hi guys, another newbie question from me
Correct me if I'm wrong, but if I flash a v2.1 SBF, then the kernel will also be flashed to v2.1 as well right?
Ok, so we also have a variety of custom roms. Some are based on v2.2 kernel, while some are for v2.1.
Now my question is, I know that CM7 is based on v2.2 kernel. Currently, I'm using a stock v2.1 SBF, so the kernel is also v2.1 as well. I want to know that despite this, can I still flash CM7 custom rom (which again is based on v2.2 kernel) on my phone? Or can I only flash a CM6 custom rom that is based on v2.1 kernel?
chaoscreater said:
Hi guys, another newbie question from me
Correct me if I'm wrong, but if I flash a v2.1 SBF, then the kernel will also be flashed to v2.1 as well right?
Ok, so we also have a variety of custom roms. Some are based on v2.2 kernel, while some are for v2.1.
Now my question is, I know that CM7 is based on v2.2 kernel. Currently, I'm using a stock v2.1 SBF, so the kernel is also v2.1 as well. I want to know that despite this, can I still flash CM7 custom rom (which again is based on v2.2 kernel) on my phone? Or can I only flash a CM6 custom rom that is based on v2.1 kernel?
Click to expand...
Click to collapse
Are you rooted on stock 2.1? Even CM6 is on the 2.2.1 kernel, so you would have to flash the 2.2 Vulnerable Recovery and then reroot, if I'm not mistaken.
Sent from my Milestone using XDA Premium App
i think you can flash CM7 (if you editing rom)
XT720 use milestone's rom on 29 kernel
chaoscreater said:
Hi guys, another newbie question from me
Correct me if I'm wrong, but if I flash a v2.1 SBF, then the kernel will also be flashed to v2.1 as well right?
Ok, so we also have a variety of custom roms. Some are based on v2.2 kernel, while some are for v2.1.
Now my question is, I know that CM7 is based on v2.2 kernel. Currently, I'm using a stock v2.1 SBF, so the kernel is also v2.1 as well. I want to know that despite this, can I still flash CM7 custom rom (which again is based on v2.2 kernel) on my phone? Or can I only flash a CM6 custom rom that is based on v2.1 kernel?
Click to expand...
Click to collapse
your kernel will update after install the CM7, because CM7 contain the new 2.2 kernel, you can flash CM7 directly, but remember to flash the BPSW update.
skadude66 said:
Are you rooted on stock 2.1? Even CM6 is on the 2.2.1 kernel, so you would have to flash the 2.2 Vulnerable Recovery and then reroot, if I'm not mistaken.
Sent from my Milestone using XDA Premium App
Click to expand...
Click to collapse
Yes i'm rooted on stock 2.1. Initially, I couldn't get into OpenRecovery after flashing the stock 2.1 SBF, whereas I could when I was on stock 2.2. I did some searching and found this:
http://android.doshaska.net/rootable
and flashed the vulnerable recovery and now everything works fine. I got my phone rooted and currently using the TelusLite v5.2 for Eclair. However, i'm not sure if the vulnerable recovery is the 2.2 or not, i'm guessing it is?
Charles_l said:
your kernel will update after install the CM7, because CM7 contain the new 2.2 kernel, you can flash CM7 directly, but remember to flash the BPSW update.
Click to expand...
Click to collapse
Ok now i'm confused. From what I know, the bootloader for Motorola devices like the Milestone is locked. Therefore, we can't properly flash a custom rom on the phone, and we can't flash a different kernel either (which is why if you try to change one of the settings that relate to the kernel in OpenRecovery, you'll brick your phone).
So I've always thought that only flashing a stock SBF will change the kernel, and that the custom roms will rely on the stock kernel, hence why there're custom roms for different Android versions, like Eclair and Froyo? So ya i'm a little bit confused here.
Also, what's the BPSW update? What does it stand for and is that included in the CM7 custom rom topic? I couldn't find it and Google didn't find anything either.....
chaoscreater said:
Yes i'm rooted on stock 2.1. Initially, I couldn't get into OpenRecovery after flashing the stock 2.1 SBF, whereas I could when I was on stock 2.2. I did some searching and found this:
http://android.doshaska.net/rootable
and flashed the vulnerable recovery and now everything works fine. I got my phone rooted and currently using the TelusLite v5.2 for Eclair. However, i'm not sure if the vulnerable recovery is the 2.2 or not, i'm guessing it is?
Ok now i'm confused. From what I know, the bootloader for Motorola devices like the Milestone is locked. Therefore, we can't properly flash a custom rom on the phone, and we can't flash a different kernel either (which is why if you try to change one of the settings that relate to the kernel in OpenRecovery, you'll brick your phone).
So I've always thought that only flashing a stock SBF will change the kernel, and that the custom roms will rely on the stock kernel, hence why there're custom roms for different Android versions, like Eclair and Froyo? So ya i'm a little bit confused here.
Also, what's the BPSW update? What does it stand for and is that included in the CM7 custom rom topic? I couldn't find it and Google didn't find anything either.....
Oh and one more thing, I think this is a bug so can someone look into it? The statusbar hides itself and to unhide it, you have to ADWSettings (press the Menu capacitive button, in between the back and home button, and then click More, then choose ADWSettings).
Then, click on System preferences, and the first option is "Hide Statusbar".
The problem is, that option is by default already un-ticked, which means it does NOT hide your statusbar. And yet, the statusbar is hidden........the only way to fix this is to enable the option so that it actually hides it, then close everything and go back to your desktop, and then open ADWSettings again and then un-tick it. This will fix it and make the statusbar appear.
However, if you move your shortcuts/icons on the desktop around, or if you move it to the Trash, then this will undo the statusbar change and will make it hide again. So then you'll have to do this constantly, so I suggest you guys make sure your desktop shortcuts are fully configured, and then make the statusbar change at the end.
Click to expand...
Click to collapse
Yes, VR is based on 2.2.
sorry, what does VR stand for? And I still don't understand it, can you please explain?
chaoscreater said:
sorry, what does VR stand for? And I still don't understand it, can you please explain?
Click to expand...
Click to collapse
VR is vulnerable recovery, it's what is on android.doshaska.net/rootable
ahh I see......but I still don't understand the part about the kernel.
I thought that every new firmware version update will use a newer version of the kernel? If yes, then how can custom roms like CM7 that requires kernel for v2.2, be installed on stock v2.1? Unless both the v2.1 and v2.2 stock SBF use the same kernel version? But then again, why are there specific roms for Eclair and Froyo? If you look at this topic here:
http://forum.xda-developers.com/showthread.php?t=966812
the OP says that some of those roms might not work because of different kernels. So it leads me to believe that if you're on stock v2.1, then the kernel is different than if you're on stock v2.2, hence why the custom roms you can install are separated by Eclair and Froyo......
And lastly, if custom roms like CM7 will install the v2.2 kernel, shouldn't that require the bootloader to be unlocked?? I thought we can't change the kernel yet? I'm confused....
chaoscreater said:
ahh I see......but I still don't understand the part about the kernel.
I thought that every new firmware version update will use a newer version of the kernel? If yes, then how can custom roms like CM7 that requires kernel for v2.2, be installed on stock v2.1? Unless both the v2.1 and v2.2 stock SBF use the same kernel version? But then again, why are there specific roms for Eclair and Froyo? If you look at this topic here:
http://forum.xda-developers.com/showthread.php?t=966812
the OP says that some of those roms might not work because of different kernels. So it leads me to believe that if you're on stock v2.1, then the kernel is different than if you're on stock v2.2, hence why the custom roms you can install are separated by Eclair and Froyo......
And lastly, if custom roms like CM7 will install the v2.2 kernel, shouldn't that require the bootloader to be unlocked?? I thought we can't change the kernel yet? I'm confused....
Click to expand...
Click to collapse
What you're confusing is that the version of android such as 2.2 is NOT the Kernel. The only way for you to change the kernel per se is to flash an sbf such as the Eclair or Froyo sbf. These are signed by Motorola and have holes in the code that have been exploited so we can flash Custom ROMs. The only things that we can do is flash a custom ROM or flash an SBF through RSD Lite. Kernels cannot be changed otherwise.
Sent from my Milestone using XDA Premium App
ya I understand that, and that's exactly the reason why i'm confused.....
If you flash a v2.1 SBF, then your Android version is v2.1 (Eclair).
If you flash a v2.2 SBF, then your Android version is v2.2 (Froyo).
Now, the problem is that custom roms like CM7 requires the kernel for Froyo. In other words, you have to flash a stock v2.2 SBF first, so that your phone will be running Froyo and that the kernel will obviously be for Froyo as well.
So what I don't understand is, I'm using Eclair right now because I flashed a New Zealand v2.1 SBF. The Android version I'm running on is Eclair, and the kernel version should be for Eclair as well.
Then why is it that you guys said I can still flash CM7, which requires the kernel for Froyo?
chaoscreater said:
ya I understand that, and that's exactly the reason why i'm confused.....
If you flash a v2.1 SBF, then your Android version is v2.1 (Eclair).
If you flash a v2.2 SBF, then your Android version is v2.2 (Froyo).
Now, the problem is that custom roms like CM7 requires the kernel for Froyo. In other words, you have to flash a stock v2.2 SBF first, so that your phone will be running Froyo and that the kernel will obviously be for Froyo as well.
So what I don't understand is, I'm using Eclair right now because I flashed a New Zealand v2.1 SBF. The Android version I'm running on is Eclair, and the kernel version should be for Eclair as well.
Then why is it that you guys said I can still flash CM7, which requires the kernel for Froyo?
Click to expand...
Click to collapse
I have never tried flashing CM7 from Eclair, so I can't tell you that it will work. I upgraded to stock Froyo on Telus the day it came out and got frustrated with it and rooted the same day.
Sent from my Milestone using XDA Premium App
Hmm well I'd flash to stock Froyo as well, then I wouldn't have a problem installing CM7 because I know it'll definitely work. Except that the kernel for Froyo doesn't work well on my Milestone. Many people have problems with the Froyo kernel, mostly to do with connection problems like wifi or 3g.
I've had problem with my wifi where it connects to my router, but isn't sending/receiving any data. Either that, or it works for 5 mins and then disconnects itself afterwards.
Many people suggested to flash back to stock Eclair, so I did and my wifi works awesome right now and never had a connection problem yet. Currently, i'm using the TelusLite v5.2 custom rom for Eclair, and it works great but I wanna try out custom roms for Cyanogen Mod, like CM6 or CM7.
From what I know, CM6 is for Eclair because it uses the Eclair kernel. Whereas CM7 is for Froyo as it uses the Froyo kernel. However, I think the latest version of CM6 also uses the Froyo kernel, as somebody mentioned it in the CM7 topic somewhere.......so ya I'm pretty sure you CAN'T install CM7 on Eclair since the kernel requirement is different.
And yet, i'm confused with the answer in the 4th post:
http://forum.xda-developers.com/showpost.php?p=16834339&postcount=4
chaoscreater said:
Hmm well I'd flash to stock Froyo as well, then I wouldn't have a problem installing CM7 because I know it'll definitely work. Except that the kernel for Froyo doesn't work well on my Milestone. Many people have problems with the Froyo kernel, mostly to do with connection problems like wifi or 3g.
I've had problem with my wifi where it connects to my router, but isn't sending/receiving any data. Either that, or it works for 5 mins and then disconnects itself afterwards.
Many people suggested to flash back to stock Eclair, so I did and my wifi works awesome right now and never had a connection problem yet. Currently, i'm using the TelusLite v5.2 custom rom for Eclair, and it works great but I wanna try out custom roms for Cyanogen Mod, like CM6 or CM7.
From what I know, CM6 is for Eclair because it uses the Eclair kernel. Whereas CM7 is for Froyo as it uses the Froyo kernel. However, I think the latest version of CM6 also uses the Froyo kernel, as somebody mentioned it in the CM7 topic somewhere.......so ya I'm pretty sure you CAN'T install CM7 on Eclair since the kernel requirement is different.
And yet, i'm confused with the answer in the 4th post:
http://forum.xda-developers.com/showpost.php?p=16834339&postcount=4
Click to expand...
Click to collapse
I haven't heard of Eclair to CM7 directly. Every ROM except for the Eclair roms like you are running now are ALL based on Froyo. GB is based on the Froyo kernel, but is a gingerbread port.
Sent from my Milestone using XDA Premium App
yup I know. After all, there is no official Gingerbread support for Milestone (yet), that's why we don't have a v2.3 SBF to flash (therefore not able to get the kernel for Gingerbread).
But ya i'm pretty sure I got this sorted, after all the OP did specifically say that some roms might not work due to different kernels, which is mentioned in this topic here:
http://forum.xda-developers.com/showthread.php?t=966812
so ya you either have to flash the stock v2.1 SBF or v2.2 SBF in order to install specific custom roms that you want, depending on what kernel they're based on, right?
Oh well, guess i'll just stay with TelusLite v5.2 for now. It's pretty fast and stable so I guess that's good enough.
chaoscreater said:
yup I know. After all, there is no official Gingerbread support for Milestone (yet), that's why we don't have a v2.3 SBF to flash (therefore not able to get the kernel for Gingerbread).
But ya i'm pretty sure I got this sorted, after all the OP did specifically say that some roms might not work due to different kernels, which is mentioned in this topic here:
http://forum.xda-developers.com/showthread.php?t=966812
so ya you either have to flash the stock v2.1 SBF or v2.2 SBF in order to install specific custom roms that you want, depending on what kernel they're based on, right?
Oh well, guess i'll just stay with TelusLite v5.2 for now. It's pretty fast and stable so I guess that's good enough.
Click to expand...
Click to collapse
The issue is that TelusLite is no longer updated. Any issues that you will encounter may not be fixed. I've always found RSD Lite to be finicky, but you can always flash the 2.2 VR and try other ROMs and if you aren't happy, you can reflash the 2.1 and go back to TelusLite.
Many options for you to try out!
Sent from my Milestone using XDA Premium App
ya it seems like it. But the latest build (v5.2) was updated on July 2011 so it's only a month old? So ya not too bad. I haven't had any issues with it, and all the stuff that I use my phone for works fine on this rom so i'm pretty happy with it.
I only wanted to try out CM7 because it looks nice and that many of my friends recommended me to use it. But ur right, there're still other great roms out there that I can test out.
RSD Lite works well for me, never had a problem with it so i'm pretty happy. At least the flashing and rooting process on Android is fairly easy. Whereas on Windows Mobile or on Maemo (when I still had my Nokia N900), it was a pain in the ass, especially that the flasher program for Maemo doesn't work on Windows 7
Anyway, thanks A LOT for your help. You've helped me in the other topic I posted as well, I really appreciate you taking the time to answer my newbie questions
chaoscreater said:
ya it seems like it. But the latest build (v5.2) was updated on July 2011 so it's only a month old? So ya not too bad. I haven't had any issues with it, and all the stuff that I use my phone for works fine on this rom so i'm pretty happy with it.
I only wanted to try out CM7 because it looks nice and that many of my friends recommended me to use it. But ur right, there're still other great roms out there that I can test out.
RSD Lite works well for me, never had a problem with it so i'm pretty happy. At least the flashing and rooting process on Android is fairly easy. Whereas on Windows Mobile or on Maemo (when I still had my Nokia N900), it was a pain in the ass, especially that the flasher program for Maemo doesn't work on Windows 7
Anyway, thanks A LOT for your help. You've helped me in the other topic I posted as well, I really appreciate you taking the time to answer my newbie questions
Click to expand...
Click to collapse
Anytime! Let me know if you need anything else
Sent from my Milestone using XDA Premium App
chaoscreater said:
Hmm well I'd flash to stock Froyo as well, then I wouldn't have a problem installing CM7 because I know it'll definitely work. Except that the kernel for Froyo doesn't work well on my Milestone. Many people have problems with the Froyo kernel, mostly to do with connection problems like wifi or 3g.
I've had problem with my wifi where it connects to my router, but isn't sending/receiving any data. Either that, or it works for 5 mins and then disconnects itself afterwards.
Many people suggested to flash back to stock Eclair, so I did and my wifi works awesome right now and never had a connection problem yet. Currently, i'm using the TelusLite v5.2 custom rom for Eclair, and it works great but I wanna try out custom roms for Cyanogen Mod, like CM6 or CM7.
From what I know, CM6 is for Eclair because it uses the Eclair kernel. Whereas CM7 is for Froyo as it uses the Froyo kernel. However, I think the latest version of CM6 also uses the Froyo kernel, as somebody mentioned it in the CM7 topic somewhere.......so ya I'm pretty sure you CAN'T install CM7 on Eclair since the kernel requirement is different.
And yet, i'm confused with the answer in the 4th post:
http://forum.xda-developers.com/showpost.php?p=16834339&postcount=4
Click to expand...
Click to collapse
Well, you can open a CM7 zip package, you should see a file named "boot.img", that is the kernel, came from the stock Froyo SBF, so that it can pass the bootlooder checking, and it will replace the old kernel during the CM7 installation. That is why the kernel will update to the stock 2.2 kernel after you installed the CM7.
Charles_l said:
Well, you can open a CM7 zip package, you should see a file named "boot.img", that is the kernel, came from the stock Froyo SBF, so that it can pass the bootlooder checking, and it will replace the old kernel during the CM7 installation. That is why the kernel will update to the stock 2.2 kernel after you installed the CM7.
Click to expand...
Click to collapse
I see......in that case, can I replace the boot.img with the one for Eclair? I.e, use the 2.1 kernel instead of 2.2? I'm pretty sure this isn't possible since the custom rom is made to work with that particular kernel version, but maybe it does work?
Hi,
I finally got a Samsung Galaxy S after finding a great a deal on it. I'm aware that there are several ways on how to root this device. However, due to that I don't know which to use.
Currently I'm running on 2.2.1 Froyo XXJPY with Kernel Version of [email protected] #1.
I'm not totally clueless about rooting as I've done it already on my HTC Wildfire.
Could someone please advise me which is the most up-to-date and safest method of rooting? Link would be greatly appreciated.
Also, I'm a bit confused about installing ROMs. I used to use CWM on my HTC Wildfire which was incredebly easy to do. Would it be the same on my Galaxy S?
I'm planning to test out MIUI, DarkysROM and such ROMs. Would these ROMs have the LAGFIX feature integrated in them as well?
I apologise if a thread like this has already been posted a thousand times but I just can't come up with a definite answer.
Thanks in advance.
I have a galaxy s Vibrant the I9000M and I rooted and unlocked mine today using SuperOneCick and then The Galaxy s unlock by helroz on the app market took a grand total of 6 minutes
Thank you! Now, that's one down.
Now just want to know about flashing ROMs e.g. MIUI, DarkyROM and such.
Do I need to root my SGS first to be able to flash custom ROMs?
I also noticed that you would also have to flash firwares and kernels. Do I need to this before flashing custom ROMs?
Thanks in advance.
In order to flash a custom rom you need to have clockworkmod (CWM) recovery.
and from that its easy
As for the newer rom's here, they are all 2.3.x, so in order to get from 2.2.1 JPY, you will need to flash a stock rom 2.3.x with bootloaders via Odin.
use this link to read about odin and flashing with it. its a great guide
http://forum.xda-developers.com/showthread.php?t=723596
to find stock rom's - they are in the general section. and custom rom's in the dev section.
read a little and after that have fun!!
And keep in mind every rom has its little guide, read those before you flash any.
Hi,
Many thanks for replying. Can I follow the video below made by a fellow XDA member direct from 2.2.1 to 2.3.4 via Odin?
http://www.youtube.com/watch?v=6lO3Y86N2p0&feature=BFa&list=FLqhM0qK4aVsLmWAA_YYhBCA&lf=mh_lolz
So I will Download stock JVQ from Samfirmware > Download Odin > Flash a stock 2.3.4 JVQ > Install chosen Kernel with CWM > Flash chosen ROM using CWM.
When would I need root then?
Is that right?
This reminds me when I had my Samsung Tocco. Pretty much same procedures.
Code Geass said:
Hi,
Many thanks for replying. Can I follow the video below made by a fellow XDA member direct from 2.2.1 to 2.3.4 via Odin?
http://www.youtube.com/watch?v=6lO3Y86N2p0&feature=BFa&list=FLqhM0qK4aVsLmWAA_YYhBCA&lf=mh_lolz
So I will Download stock JVQ from Samfirmware > Download Odin > Flash a stock 2.3.4 JVQ > Install chosen Kernel with CWM > Flash chosen ROM using CWM.
When would I need root then?
Is that right?
This reminds me when I had my Samsung Tocco. Pretty much same procedures.
Click to expand...
Click to collapse
That is right... basically when you flash a kernel with CWM you get root access. it's one of the features of a custom kernel. some of them activate it on there own and in some you need to activate it your self from the recovery (very simple).
And all the custom rom's come with root access, so in following the steps you wrote, you will get the root access with the custom kernel, and again in the custom rom.
Thanks for everyone's help. I'm now running Armetris 3.6.1 with Semaphore Kernel.
Just a question though, with my phone rooted, lagfix enabled, flashed with custom ROM and such, can I just simply go back to stock ROM? e.g. JVQ/JVR using Odin without any problems?
It is suggested to disable lagfix before changing rom's and kernel's
I know some how would say it is not a must when you use odin, but i always disable it before doing changes. I like to keep it safe.
sorry for this nooob question....
new to the samsung gt i9000, do i need to create a gold card before i do anything else????
sorry to be a bit thick but im used to htc
Hi,
Thanks for the reply. I'm currently running on Semaphore Kernel but I can't find any Lag Fix option on my phone? There isn't any on CWM Recovery as well.
I thought when you use EXT4 and convert it, Lag Fix would show up but I found nothing, so I just converted back to RFS.
So, I'm fine to directly go back to 2.3.4 JVQ even even I have a custom Kernel and custom ROM?
Thanks in advance!
Code Geass said:
Hi,
Thanks for the reply. I'm currently running on Semaphore Kernel but I can't find any Lag Fix option on my phone? There isn't any on CWM Recovery as well.
I thought when you use EXT4 and convert it, Lag Fix would show up but I found nothing, so I just converted back to RFS.
So, I'm fine to directly go back to 2.3.4 JVQ even even I have a custom Kernel and custom ROM?
Thanks in advance!
Click to expand...
Click to collapse
If you used the EXT4 app and converted to RFS then you have disabled the lagfix.
The lagfix changes the filesystem from RFS to EXT4. so when you converted to RFS yoh disabled it.
So,yes you are good to go.
---------- Post added at 02:57 PM ---------- Previous post was at 02:55 PM ----------
pat da punk said:
sorry for this nooob question....
new to the samsung gt i9000, do i need to create a gold card before i do anything else????
sorry to be a bit thick but im used to htc
Click to expand...
Click to collapse
Gold card?? what??
Also, If I were to flash a JVS Based ROM do I need to be on stock JVS and a JVS Kernel to flash it?
Once on I'm on JVS custom ROM can I just go back again to JVQ stock (Older firmware) without problems?
Really appreciate all your help Bork84!
Basically using odin you can change to JVS and JVQ no problem.
As far as custom rom, from what I know it does not matter on which 2.3.x you are, thay all have the same bootloders. so technically you dont need to be on stock JVS to flash a JVS custom rom.
but I am not an expert on that.
from my experience, i flashed to a JVR (2.3.4) custom rom via CWM from a 2.3.3 stock rom, and didn't had any problems.
So i cant give you a 100% answer
Hi there,
I'm using CM7 on my Galaxy S with kernel 2.6.35.12-gdf10700 [email protected]#1
Can anyone please tell me if this is the "recommended" kernel for CM7?
I've read that Hardcore Speedmod kernel is meant to be the "best" but is that still the case?
Can I use any of Hardcore's latest ones listed here:
http://forum.xda-developers.com/showthread.php?t=1044519
http://touristinparadise.blogspot.com/2011/10/samsung-galaxy-s-download-speedmod.html
because apparently they are not to be used with CyanogenMod?
Many thanks
Stock kernel is the best if you want to avoid bugs.
Do NOT flash any other kernels than those which are made for CM/MIUI.
Here are few:
Glitch: http://forum.xda-developers.com/showthread.php?t=1041532
Fugu: http://forum.xda-developers.com/showthread.php?t=1112568
Zach's kernels: http://forum.xda-developers.com/showthread.php?t=1053304
You can try those, but for me stock is the best.
Many thanks.
I was just a little confused because Cyanogen's own wiki suggests using the Speedmod kernel:
http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide
so I wasn't sure whether stock kernels are compatible with CM7.
So... the stock kernels (http://samsung-updates.com/rooted-stock-kernels-for-samsung-roms/) are fully compatible with CM7 then?
Thanks
It says flash speedmod because by flashing that you'll get CWM which you need to flash CM.
And no, do not use those kernels. Those are for STOCK ROMs.
When we said "stock", we meant the kernel that is included by the CM already.
Go to developement section and find topic with [Kernel][CM/MIUI] or something like that. Those are compatible with CM.
Just check links I gave you.
Erakko said:
When we said "stock", we meant the kernel that is included by the CM already.
Click to expand...
Click to collapse
Got it, thanks - when you said "stock" I thought you meant the ones from Samsung directly.
In that case, I'll just stick with what CM includes and I won't mess around with them.
Thanks.
NP
Just hit "thanks" button if I helped.
I add that to my sig.