Related
download link is http://www.multiupload.com/X558NDM1WO
Tested on my bell atrix
If no signal or unknown baseband is found, just flash to other radio
it wont break the phone unless you have done sth awesome
UPDATE: I am upgrading this radio on top of France Orange 2.1.1
I don't own a ATT Atrix so I am not sure whether it works on ATT Atrix or not
ytwytw said:
download link is http://u.115.com/file/e615oxg1
then click on "电信下载" to start downloading
Tested on my bell atrix
trying to upload the radio file to the forum now... but really slow!
(YES, you know bell DSL sucks)
Click to expand...
Click to collapse
Will this work on the at&t atrix?
Enviado desde mi MB860 usando XDA Premium App
josuetenista said:
Will this work on the at&t atrix?
Enviado desde mi MB860 usando XDA Premium App
Click to expand...
Click to collapse
I believe other radios have been used on the AT&T atrix before, you should be good to use this. If you end up w/o signal just flash SBF and you'll be back to normal.
Sent from my MB860 using XDA Premium App
and what can u say about new radio? is there smth new? smth better?
some att plz test it !!
What's the point of this radio?
Sent from my MB860 using XDA Premium App
frankiedizzle87 said:
What's the point of this radio?
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
agurzhiy said:
and what can u say about new radio? is there smth new? smth better?
Click to expand...
Click to collapse
I just flashed yesterday, gonna see how it works (Bell Canada)
The point is to share...
however in China only 2100 band works, so I assuming it works better for Europeans instead of Americans
Let's see...
For a second there I had hope that it would be the same version as the stock Bell radio. (1.77, I had to look it up)
I am guessing that since China has some differences in their mobile networks compared to NA, it might be interesting to see if it improves things over here.
Cheers!
Currently, I am using 4.1.83 ATT version. I failed to upgrade this radio from basebans version N01.77.15P via RSD 5.0
laitalk said:
Currently, I am using 4.1.83 ATT version. I failed to upgrade this radio from basebans version N01.77.15P via RSD 5.0
Click to expand...
Click to collapse
That's because of the ram downloaders this sbf uses. It will not work on an AT&T Atrix.
I can make a compatible sbf if some people want to test it.
Whipon said:
That's because of the ram downloaders this sbf uses. It will not work on an AT&T Atrix.
I can make a compatible sbf if some people want to test it.
Click to expand...
Click to collapse
yes please, iam be the first ,iam sure we all want to try it
Didn't work for me tried flashing it twice even without the sim and sd inserted. I get no service and the phone menu doesn't allow me to select any bands etc.
Bell device w/ french rom
Im asking are there any benefits.to this if your on att. We have hspa and hsupa what's this have to offer?
Sent from my MB860 using XDA Premium App
Whipon said:
That's because of the ram downloaders this sbf uses. It will not work on an AT&T Atrix.
I can make a compatible sbf if some people want to test it.
Click to expand...
Click to collapse
yes,plz.i'm dying to use it.cuz i'm now living in china,and i uses the att atrix,the baseband don't fit the network.thx.
Whipon said:
That's because of the ram downloaders this sbf uses. It will not work on an AT&T Atrix.
I can make a compatible sbf if some people want to test it.
Click to expand...
Click to collapse
i made it a few days back, and it failed on my at&t sku.
to be specific, it flashes, but the phone boots up without signal and "unknown" baseband.
frankiedizzle87 said:
Im asking are there any benefits.to this if your on att. We have hspa and hsupa what's this have to offer?
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
from what i can see,
your definition of "benefits" must be very limited. not everyone needs hsupa, i'd live without it if it improves stability.
you have no idea about what ymmv means. with the vast possibilities/combinations of different carriers/terrains/vendors/gen of devices, why would you even ask about the "benefits"? chances are someone would benefit from it but just not you.
racca said:
i made it a few days back, and it failed on my at&t sku.
to be specific, it flashes, but the phone boots up without signal and "unknown" baseband.
Click to expand...
Click to collapse
I see. So its pointless to make another one for AT&T.
Thanks for clarifying it ^^.
Whipon said:
I see. So its pointless to make another one for AT&T.
Thanks for clarifying it ^^.
Click to expand...
Click to collapse
I'm in China and I wanna this, thanks!
The default att baseband doesn't work so well in my area, loss signal and too much heat
lanyao1920 said:
I'm in China and I wanna this, thanks!
The default att baseband doesn't work so well in my area, loss signal and too much heat
Click to expand...
Click to collapse
what exactly do you think this baseband is gonna do to an at&t sku?
you'd most likely go from "loss signal and too much heat" to no signal at all.
i suppose you can just turn on flight mode if you want it so bad.
ytwytw said:
so I assuming it works better for Europeans instead of Americans
Let's see...
Click to expand...
Click to collapse
we have 900/1800/2100
atrix should launch these days in mid europe, maybe there's a better compability with our radio for switching in baseband...
i got a at&t atrix too, no setting for FU baseband, just the american one... (quadband eh?)
frankiedizzle87 said:
Im asking are there any benefits.to this if your on att. We have hspa and hsupa what's this have to offer?
Click to expand...
Click to collapse
baseband does seriosly nothing to packetservice?
Hi, I would like to update the bootloader on my Bionic and can't find instructions on how to do it. Can someone point me in the right direction please. Thanks.
Sent from my DROID BIONIC using XDA
mike t said:
Hi, I would like to update the bootloader on my Bionic and can't find instructions on how to do it. Can someone point me in the right direction please. Thanks.
Sent from my DROID BIONIC using XDA
Click to expand...
Click to collapse
What's your current bootloader version?
The easiest way to put in a new bootloader is just to grab the .902 FXZ. It will make sure that you're on a new one.
A .61
Sent from my DROID BIONIC using XDA
Bootloader is locked!!
razz1 said:
Bootloader is locked!!
Click to expand...
Click to collapse
I know but but it can be updated right? I have "awakened" the gsm in the phone and I am using an AT&T prepaid when I can't get a signal with Verizon. I read in the forum that to do this while on an ICS rom you need to update the bootloader to A.72 to get it to work. That is why I'm asking.
Sent from my DROID BIONIC using XDA
I'm sorry but I guess I never heard of updating the bootloader.
Are you talking about baseband or kernel? If not, I guess I can't help.
Latest bootloader would be with the .902 update.
razz1 said:
I'm sorry but I guess I never heard of updating the bootloader.
Are you talking about baseband or kernel? If not, I guess I can't help.
Click to expand...
Click to collapse
Me neither. All you really can do with the bionic is install the latest update. Not really sure if it changes the boot loader. I was under the impression that it updated the radios and glitches in the os. Never heard of it changing the boot loader.
Sent from my DROID BIONIC using XDA
mike t said:
I know but but it can be updated right? I have "awakened" the gsm in the phone and I am using an AT&T prepaid when I can't get a signal with Verizon. I read in the forum that to do this while on an ICS rom you need to update the bootloader to A.72 to get it to work. That is why I'm asking.
Sent from my DROID BIONIC using XDA
Click to expand...
Click to collapse
Weird, you should have to have anything to do with the official bootloader, you should be using ClockworkMod. Still I could be wrong.
mike t said:
I have "awakened" the gsm in the phone and I am using an AT&T prepaid when I can't get a signal with Verizon.
Click to expand...
Click to collapse
What? You somehow activated gsm part of Qualcomm 6600?
Also, with 902 FXZ update I have 0A.61 bootloader.
Need Help About Samsung Galaxy S Duos GT-S7562
Can Anyone help me? How Can I Update Bootloader of SDuos. also attach the files.
Thanks
bikash007s said:
Can Anyone help me? How Can I Update Bootloader of SDuos. also attach the files.
Thanks
Click to expand...
Click to collapse
I think you're in the wrong forum.
Hi everyone,
I have an XT860 from Bell Canada. I would like to mod it. Can someone tell me if it's a Droid 3 or Droid 2?
Also, what are the latest versions of Android available for these devices? The one installed now is 2.3.6 and I would very much like to jump to a Jelly Bean.
I appreciate some input before I waste too much trying to mod this.
Thanks
Droid 3. You're in the right section. Each ROM has an 860 patch but the problem is that the development on JellyBean has kind of stalled since the camera isn't working.
MrObvious said:
Droid 3. You're in the right section. Each ROM has an 860 patch but the problem is that the development on JellyBean has kind of stalled since the camera isn't working.
Click to expand...
Click to collapse
MrObvious, thanks a lot for the feedback.
1- What is an "860" patch?
2- What is the latest stable version of Android for my device? Not looking for Jelly Bean if camera doesn't work.
3- Where can I find instructions and latest ROMs for my device? ***I don't want to mess up the radio frequencies as it's a Canadian phone***
Thanks again.
Basically it just patches a few files and the build.prop so that it works with the 860 as all our ROMs are built for the 862 which is the Verizon CDMA version. Just flash a ROM and look for a patch. Minimoto is a good one because it has stability and Endroid made a patch that works.
Sent from my DROID3 using xda app-developers app
MrObvious said:
Basically it just patches a few files and the build.prop so that it works with the 860 as all our ROMs are built for the 862 which is the Verizon CDMA version. Just flash a ROM and look for a patch. Minimoto is a good one because it has stability and Endroid made a patch that works.
Sent from my DROID3 using xda app-developers app
Click to expand...
Click to collapse
Thanks again. So, where is the official mod thread? From what you said, I first mod it and then apply the Minimoto patch for 860. Did I get that right or is there a ROM specific to 860 that I should do?
The phone is unlocked and rooted but I don't think I have the framework to install ROMs so I probably need to read the official modding thread.
Thanks
torontobc said:
Thanks again. So, where is the official mod thread? From what you said, I first mod it and then apply the Minimoto patch for 860. Did I get that right or is there a ROM specific to 860 that I should do?
The phone is unlocked and rooted but I don't think I have the framework to install ROMs so I probably need to read the official modding thread.
Thanks
Click to expand...
Click to collapse
For minimoto I'm moving the actual rom. If you look through the posts in the minimoto thread you'll find the link to the 860 version. I'd link you but I'm on my phone and it's a pita
Sent from my DROID3 using xda premium
Endoroid said:
For minimoto I'm moving the actual rom. If you look through the posts in the minimoto thread you'll find the link to the 860 version. I'd link you but I'm on my phone and it's a pita
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
I will go with Minimoto first and then try other MODs. There are many threads on Minimoto. I wonder why there is no sticky "Droid 3 ROMs & Instructions"
So far I learned that I have to install (somehow) SafeStrap and then MiniMoto ROM. Am I getting that correct? Is there a comprehensive guide to this specific to XT860?
Thanks
Sounds like you're getting it. Then look through the Minimoto thread to find the 860 patch.
MrObvious said:
Sounds like you're getting it. Then look through the Minimoto thread to find the 860 patch.
Click to expand...
Click to collapse
Thanks. Is this the official Minimoto ROM thread? http://forum.xda-developers.com/showthread.php?t=1978304
It mentions it's for XT862 but mine is XT860 and a Canadian version (Bell Canada). Would I be safe to use that?
torontobc said:
Thanks. Is this the official Minimoto ROM thread? http://forum.xda-developers.com/showthread.php?t=1978304
It mentions it's for XT862 but mine is XT860 and a Canadian version (Bell Canada). Would I be safe to use that?
Click to expand...
Click to collapse
Here's the 860 version
http://forum.xda-developers.com/showthread.php?p=35709354
Sent from my DROID3 using xda premium
Endoroid said:
Here's the 860 version
http://forum.xda-developers.com/showthread.php?p=35709354
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
Thanks for the post but that is a huge thread. Were you meaning to point to the thread or a link within it?
Thanks
torontobc said:
Thanks for the post but that is a huge thread. Were you meaning to point to the thread or a link within it?
Thanks
Click to expand...
Click to collapse
Actually his link goes right to the patch (to the post with the patch)
DoubleYouPee said:
Actually his link goes right to the patch (to the post with the patch)
Click to expand...
Click to collapse
Yes, it does. I was hasty and not waiting for full page to show up. Thanks.
1- I have got Minimoto installed but Android version is 2.3.4 and that is lower than the 2.3.6 that came as stock. Is there anyway to upgrade that?
2- Would overclocking make a major different? Where is the official guide for overclocking for XT860?
Thanks
1 no 2 it can make it feel smoother
Sent from my DROID3 using xda app-developers app
MrObvious said:
1 no 2 it can make it feel smoother
Sent from my DROID3 using xda app-developers app
Click to expand...
Click to collapse
Thanks. I have installed Minimoto and here are some of the problems I am facing if there are any work-arounds for them?
1- I have been only seeing 3G and Edge for internet connection. On stock I can see H+ as well.
2- From time to time the phone doesn't have any internet connection and it has to be restarted to get internet connection - that is a big annoyance.
Any feedback?
Thanks again.
torontobc said:
Thanks. I have installed Minimoto and here are some of the problems I am facing if there are any work-arounds for them?
1- I have been only seeing 3G and Edge for internet connection. On stock I can see H+ as well.
2- From time to time the phone doesn't have any internet connection and it has to be restarted to get internet connection - that is a big annoyance.
Any feedback?
Thanks again.
Click to expand...
Click to collapse
1)these are just cosmetic, you can have it show the h+ through build.prop edits
2)try adding the line ro.ril.hep=0 to the build.prop, it should help, and try just toggling airplane mode to reset the connection, easier than rebooting
Sent from my DROID3 using xda premium
Endoroid said:
1)these are just cosmetic, you can have it show the h+ through build.prop edits
2)try adding the line ro.ril.hep=0 to the build.prop, it should help, and try just toggling airplane mode to reset the connection, easier than rebooting
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
This is already there:
#improve signal stability maybe
ro.ril.hep=0
Would I be in better situation if I can an LTE sim card even though the phone doesn't support LTE but network does so maybe signal would be better?
torontobc said:
This is already there:
#improve signal stability maybe
ro.ril.hep=0
Would I be in better situation if I can an LTE sim card even though the phone doesn't support LTE but network does so maybe signal would be better?
Click to expand...
Click to collapse
No, the phone most likely wouldnt even be able to read it. It happens to me pretty regular, I just toggle airplane mode
Sent from my GT-P5113 using xda premium
Guide - Unlock XT862 for T-mobile/ATT,
I followed this guide, and it seems to have disabled my cdma radio.
Is that right? or could it have been something else.
James101 said:
Guide - Unlock XT862 for T-mobile/ATT,
I followed this guide, and it seems to have disabled my cdma radio.
Is that right? or could it have been something else.
Click to expand...
Click to collapse
Yes, iirc enabling gsm disables cdma
Sent from my XT860 using xda premium
Endoroid said:
Yes, iirc enabling gsm disables cdma
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
Does that mean I can no longer place it in CDMA mode with that radio flash?
James101 said:
Does that mean I can no longer place it in CDMA mode with that radio flash?
Click to expand...
Click to collapse
Correct. You would have to flash back. They may be other steps to restoring cdma functionality, and probably restore the original build.prop
Sent from my XT860 using xda premium
But natiusm
Thanks, I guess I will have to flash back.
The thing is, I need my droid on cricket, and on weekends I travel to mexico, and use a mexican telcel sim chip. Works fine, but when I cross back to the usa with the telcel sim chip, I can't roam with the telcel chip onto ATT network. I need to sometimes to receive calls and texts.
If anyone knows where I can find the verizon stock build.prop, to go back to stock, please let me know. thanks!
Can anyone see any issues with flashing an ATT kitkat variant atop a Rogers device?
Thanks in advance!
Yes I can see an issue: You're having a rogers device. Never flash anything on your phone that isnt specifically made for it.
You can usually flash a custom rom no matter which carrier you have. But never use roms that are made for different devices/carriers.
Sent from my EndeavorU using XDA Premium 4 mobile app
I am using T-Mobile kitkat on my Rogers motox with unlocked bootloader. I don't have any issue so far, but keep in mind, you must understand the risk of flashing other carrier rom
Sent from my XT1053 using XDA Premium 4 mobile app
Unlock the boot loader and flash the AT&T 4.4 rom, it will work just fine. It is possible you could lose band 7(2600mhz) LTE as it may not be enabled in the AT&T firmware. You can easily go back to Rogers firmware if you decide it isn't for you.
I'm using the AT&T 4.4 on a Rogers Moto X, using it with Koodo, works great!
Thanks a lot guys! I'll give it a shot.
at&t kitkat 4 on rogers works!
differense said:
Thanks a lot guys! I'll give it a shot.
Click to expand...
Click to collapse
Same here flash the 4.4 kitkat on my rogers version of moto x using koodo and rogers sim card. both works with no issue. Of course once the rogers version comes out I will flash back again.
Want to clear the air and my curiosity, has anyone with a Rogers 1058 with a unlocked bootloader, rsdlite to TMO kitkat?
Sent on my Moto X
flashallthetime said:
Want to clear the air and my curiosity, has anyone with a Rogers 1058 with a unlocked bootloader, rsdlite to TMO kitkat?
Sent on my Moto X
Click to expand...
Click to collapse
Yes, it works just fine. I have it running on my spare Moto X.
No provider name in the upper left. If you flash the entire bundle it will most likely disable band 7 LTE, I have no way to verify that right now though. For some reason I find the AT&T 4.4 works better and gives better battery life. It could just be my imagination though, or it may be because the modem file matches the hardware perfectly.
Steve-x said:
Yes, it works just fine. I have it running on my spare Moto X.
No provider name in the upper left. If you flash the entire bundle it will most likely disable band 7 LTE, I have no way to verify that right now though. For some reason I find the AT&T 4.4 works better and gives better battery life. It could just be my imagination though, or it may be because the modem file matches the hardware perfectly.
Click to expand...
Click to collapse
OK so you rsdlite the tmo retail version? I would rather not use the AT&T leak. I did flash a tmo flashable ROM and did receive LTE
Sent on my Moto X
flashallthetime said:
OK so you rsdlite the tmo retail version? I would rather not use the AT&T leak. I did flash a tmo flashable ROM and did receive LTE
Sent on my Moto X
Click to expand...
Click to collapse
Yes, I've done the full flash using the retail file with rsdlite. You will get LTE with that firmware, but it may only work on the AWS band. You would need to do some testing to see if it used Band 7 LTE (2600 mhz). I don't have a Rogers account so I can't check. I know the original 4.4 leak from AT&T had 2600 mhz disabled, so I figure other versions may as well.
Steve-x said:
Yes, I've done the full flash using the retail file with rsdlite. You will get LTE with that firmware, but it may only work on the AWS band. You would need to do some testing to see if it used Band 7 LTE (2600 mhz). I don't have a Rogers account so I can't check. I know the original 4.4 leak from AT&T had 2600 mhz disabled, so I figure other versions may as well.
Click to expand...
Click to collapse
Thanks, going to see if I can use the AT&T modem instead
Sent on my Moto X
flashallthetime said:
Thanks, going to see if I can use the AT&T modem instead
Edit : worked like a charm, not using the at&t modem
Sent on my Moto X
Click to expand...
Click to collapse
Sent on my Moto X
Are there any specific instructions available for using rsdlite to flash kitkat on a rogers device? Tia
Sent from my XT1058 using XDA Premium 4 mobile app
differense said:
Are there any specific instructions available for using rsdlite to flash kitkat on a rogers device? Tia
Sent from my XT1058 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unlock your bootloader and then follow the instructions here:
http://forum.xda-developers.com/showthread.php?t=2446515
You can use the dev edition/retail/tmobile edition firmware or even the AT&T 4.4 firmware. I recommend the dev edition though, no branding or bloatware at all.
I am using the dev edition firmware on my Rogers XT1058, using it with Koodo.
differense said:
Are there any specific instructions available for using rsdlite to flash kitkat on a rogers device? Tia
Sent from my XT1058 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No specific instructions but you must have a unlocked boot loader. Here's a good thread in how to use rsdlite http://forum.xda-developers.com/showthread.php?t=2446515 . You can use either the at&t or T-Mobile sbf firmware, the at&t firmware has more bloat than the T-Mobile version
Sent on my Moto X
Has anyone confirmed that flashing a Rogers phone with XT1060 (retail/dev/tmo) doesn't screw up the radio?
Sent from my Moto X
Thanks for everyones help thus far. I was able to flash the Dev edition without issue.
However now I'm getting a force close on my security settings. Any thoughts?
Sent from my XT1053 using XDA Premium 4 mobile app
differense said:
Thanks for everyones help thus far. I was able to flash the Dev edition without issue.
However now I'm getting a force close on my security settings. Any thoughts?
Sent from my XT1053 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You need to flash the modem
Sent on my Moto X
flashallthetime said:
You need to flash the modem
Sent on my Moto X
Click to expand...
Click to collapse
You're referring to the Rogers modem?
differense said:
You're referring to the Rogers modem?
Click to expand...
Click to collapse
No the at&t modem, did you use the at&t sbf firmware or did you just flash the ROM?
Sent on my Moto X