Not sure to whom I should direct this. The issue I'm having is when using headphones with a regular TRS plug the onboard mic is disconnected. This makes sense as most people use headsets but it would be great if the onboard mic could be forced on somehow so I could keep using my favorite headphones. Right now I'm have to take my headphones off and pull the plug for calls.
EDIT: To be clear I'm looking for a software solution to my problem.
Anyone think it would be possible to cook up a script to force the phone mic on while using standard headphones?
Related
I use FM transmitter to listen to my music on Kaiser (using Y-splitter), but somehow on device mic gets disabled, and I can't make a phone call without plugging the cable out of Kaiser.
Is there configuration available that allows me to use car speaker as phone out, and still use on-deice mic?
If not, is there an alternative to plugging out the USB cable every time I get a call?
bump, anyone!?
Can't say I'm 100% sure, but yes, I beleive it does. The jack expects the connected headphones to be audio OUT and IN. like a headset, not just headphones. So, plugging anything into it will override the external mic as well since it expects what you connected a headset, including a mic.
Like I said, not 100% sure, but pretty sure thats the case.
jomo25 said:
Can't say I'm 100% sure, but yes, I beleive it does. The jack expects the connected headphones to be audio OUT and IN. like a headset, not just headphones. So, plugging anything into it will override the external mic as well since it expects what you connected a headset, including a mic.
Like I said, not 100% sure, but pretty sure thats the case.
Click to expand...
Click to collapse
I think you're right.... wondering if there's any way around it like having BT headsets??
did you ever find a registry edit or alternative to fix this. i have the same question
Hi All,
I'm wanting to use my Diamond in the car to replace both my old iPod and sat-nav, while still having phone functions available. There are a few things I'm not happy with, so I thought I see what other people are doing.
I have a car head unit with a direct 3.5mm line-in, which used to have the iPod on the end. The Diamond works fine plugged into this through an ebay 3.5mm\USB adaptor.
If I plug the 12v>USB charger in, I get a whine over the audio - not a big problem, it's just a ground-loop, so I'll stick an isolating transformer in-line.
The main problem I have is switching between the internal speaker and the external output. If I want to have the radio on, rather than MP3, I have to unplug the adaptor, and plug the charging cable in direct, so that I can keep the battery charged - not ideal. This way I can hear the TomTom voices through the internal speaker, but it seems wrong to have to swap leads this way.
The other main problem is if I have MP3 and TomTom all through the stereo, and I get a call, I can hear the call over the stereo, but can't speak, as the Diamond is expecting an external microphone.
I guess what I need is a utility to force only the internal microphone to be used, and to allow me to force the internal speaker when I want to use the radio. It there such a thing?
I think one of these car holders has an option to plug in charger and usb-3.5mm jack adapter at the same time....
http://www.dsldevelopments.com/brodit/Holder/HTC+Touch Diamond-Brodit-Holder.asp
If i had the skills i'd try to figure out a hack to pause/mute the mp3 and mute satnav when in a call... but I don't.
That's not the problem - I can plug in the charger and 3.5mm audio at the some time, but that redirects all the audio to the car stereo, and disconnects the mic. Removing the adaptor and plugging in just the charger enables the microphone, but all my MP3s then are played through the internal speaker.
What I need is a utility to force the internal microphone to be used _all_ the time, and let me choose when to use the internal speaker when a headset is detected.
I don't suppose anyone knows how the Diamond recognises a headset? Is there a resistor link across a couple of the pins in the 11pin connnector? I'm just thinking I could make up a cable with a switch to break that contact, and 'virtually' disconnect the headset when I want the radio, or need the microphone active during a call.
You could try this program. It seems to be a virtual switch between the earpiece and external speaker. I use it a a solution for skype and other voip programs that only work through the external speaker, but the works the other way as well.
headset instaled but need phone mic allways enable
Hello,
Kaysee_sw said:
The other main problem is if I have MP3 and TomTom all through the stereo, and I get a call, I can hear the call over the stereo, but can't speak, as the Diamond is expecting an external microphone.
I guess what I need is a utility to force only the internal microphone to be used, and to allow me to force the internal speaker when I want to use the radio. It there such a thing?
Click to expand...
Click to collapse
I have the same issue of kaisee.
I use the diamond as mp3 player in my car stereo (aux-in) and i need the mic allways available to use the phone without disconect the usb or audio plug.
In my old magician this worked just fine becouse the mic was allways available.
Is the .exe posted by dctech the answer(thanks man) ? has anybody tested ? is it reliable or there is another solution?
Thanks
You need a proper bluetooth car kit to allow this. Parrot ones are very good. If you want to listen to music as well as phone calls and sat nav i would suggest that you get one with both handset and A2DP bluetooth profiles. There is a workaround app you can use to get music through a car kit with just a handset or headset profile but the quality is mono and very poor
I don't really know how to explain...
I use my Nexus one in my car for calls.
I use a jack cable which is plugged into the radio. So I can hear my partner over the speaker in the car. Very good.
But, the others can't understand me. It's crappling all over.
When I put the cable out of the jack and use the normal hands free on the phone, everything is fine and the others understand me very well.
By plugging into the car radios jack, it starts with crappling my voice again.
Does anybody have the same problem? Or is it fine on your Nexus all the time?
Formel-LMS said:
I don't really know how to explain...
I use my Nexus one in my car for calls.
I use a jack cable which is plugged into the radio. So I can hear my partner over the speaker in the car. Very good.
But, the others can't understand me. It's crappling all over.
When I put the cable out of the jack and use the normal hands free on the phone, everything is fine and the others understand me very well.
By plugging into the car radios jack, it starts with crappling my voice again.
Does anybody have the same problem? Or is it fine on your Nexus all the time?
Click to expand...
Click to collapse
sounds like the phone might be trying to find a microphone in the radio
Yes, could be. But why? What can I do?
It was very cool when somebody can try it, if it works on other NexusOne.
well the default headphones had a speaker in them so the jack is made to work as a speaker jack and a mic jack. however im not sure why it is expecting a mic when there is no information being sent back to the phone.
Simple expanation, I think - noise canceling functions.
When you're in speaker mode, it's settings are probably changed to account for a voice coming from a distance and being roughly equal for both mics, while when in regular mode it's working and expecting significant signal difference. When it doesn't get it - since you're speaking from a distance - it doesn't "think" you're talking, and cancels your voice partially as it would cancel outside noise.
There is a hack somewhere in General or Dev section, how to disable noise canceling. You might try.
OK, when I find it.... Sounds good
I hate making new threads but I can't seem to find an answer. Maybe I'm using the wrong keywords.
I use my N1 in my car alot. It's my main source for my music and hand's free calling while driving. I use the aux jack on my stereo to the N1 for music.
When I get a call it would ring though the speakers and I would touch the slider to accept the call. The caller would hear me crystal clear and I would hear them though the speakers just fine.
Now when I get a call, they can't hear me. They say I sound like I'm far far away. I can hear them just fine. But I look like a madman in my car screaming and yelling just to be heard.
So what I have to do now, is answer the call, and touch speaker, which only plays the voice though the speaker phone. They hear me crystal clear but sound is no longer going to the car speakers.
Anybody have this problem or know what's causing it or even a push in the right direction?
I have this excact same problem.
I came from a milestone using a standard 3.5mm audio jack and calls went really well. But when i tried my nexus, i got the same response, "sounds liek your far away".
I tried a few AUX cables but they all seem to do the same thing. So my solution was a aux cable with a built in mic.
I ended up modding the headphones that came with my nexus to get this working. Removed the earbuds and soldered a 3.5mm jack.
Now when i talk using that cable with a built in mic, ppl hear me very clearly. So i've jsut been using that cable since. I'm sure you can buy a premade aux cable with a mic at any local mobile audio store. I saw one at a BestBuy mobile here.
Hope this helps.
but the issue is that at one point it DID work normal with his nexus. i think what is going on here is the phone originally read the aux input as just standard audio output. but now its reading it differently somehow, i just dont know why. its almost like the difference when a phone thinks you have headset connected vs audio out connected with no mic support. no idea on a solution though...
xiophyte said:
I have this excact same problem.
I came from a milestone using a standard 3.5mm audio jack and calls went really well. But when i tried my nexus, i got the same response, "sounds liek your far away".
I tried a few AUX cables but they all seem to do the same thing. So my solution was a aux cable with a built in mic.
I ended up modding the headphones that came with my nexus to get this working. Removed the earbuds and soldered a 3.5mm jack.
Now when i talk using that cable with a built in mic, ppl hear me very clearly. So i've jsut been using that cable since. I'm sure you can buy a premade aux cable with a mic at any local mobile audio store. I saw one at a BestBuy mobile here.
I was thinking on buying the Belkin one with the mic right at the aux jack.
Hope this helps.
Click to expand...
Click to collapse
RogerPodacter said:
but the issue is that at one point it DID work normal with his nexus. i think what is going on here is the phone originally read the aux input as just standard audio output. but now its reading it differently somehow, i just dont know why. its almost like the difference when a phone thinks you have headset connected vs audio out connected with no mic support. no idea on a solution though...
Click to expand...
Click to collapse
Exactly, it DID work. I can't pin point when it happened for me. I was thinking maybe it was when I went from Eclair to Froyo?
I'm almost positive that using the phone over Aux out broken with the update to Froyo. Has anyone tried this yet with Gingerbread on the N1 or with an NS? I'm hoping they fixed this, it's a really, really frustrating problem.
My fear is that everyone at Google got free car docks so they won't ever fix it because it's never a problem for them.
I also have the exact same problem. Thought it never worked for me, I only recently sets up my car mount with aux. Anybody found a solution?
Just wanted to check is anyone else is finding that headphones plugged into this jack often are not picked up by the phone and the speaker is used instead.
Happens both with my car AUX and my in ear Klipsch earphones, although if I jiggle the plug it sometimes works. The bundled headphones (MH750) so not seem to suffer this problem.
Is this a widespread problem or an issue with my handset?
the MH750 has 3 rings on the jack as a opposed to the 2 rings on the connector for your other headphones am I right? Having the extra ring on it (meant for the remote) may be what is adding the extra tightness when inserted. I'm not sure how to solve your AUX problem but you may need to try headphones which have a built in remote like the MH750 so that it has the extra ring on the connector. This may also be a defect, as I can not confirm since my device is still on it's way.
EDIT : After receiving the phone this happened to me once. You have to play around with the smart connect settings o disable it all together. It doesn't seem to be hardware related.
i have the same problem here .
Same problem
What music app are you all using
Sent from my C6903 using xda app-developers app