I use FM transmitter to listen to my music on Kaiser (using Y-splitter), but somehow on device mic gets disabled, and I can't make a phone call without plugging the cable out of Kaiser.
Is there configuration available that allows me to use car speaker as phone out, and still use on-deice mic?
If not, is there an alternative to plugging out the USB cable every time I get a call?
bump, anyone!?
Can't say I'm 100% sure, but yes, I beleive it does. The jack expects the connected headphones to be audio OUT and IN. like a headset, not just headphones. So, plugging anything into it will override the external mic as well since it expects what you connected a headset, including a mic.
Like I said, not 100% sure, but pretty sure thats the case.
jomo25 said:
Can't say I'm 100% sure, but yes, I beleive it does. The jack expects the connected headphones to be audio OUT and IN. like a headset, not just headphones. So, plugging anything into it will override the external mic as well since it expects what you connected a headset, including a mic.
Like I said, not 100% sure, but pretty sure thats the case.
Click to expand...
Click to collapse
I think you're right.... wondering if there's any way around it like having BT headsets??
did you ever find a registry edit or alternative to fix this. i have the same question
Related
Solution is posted on page two, Thank you everyone.
------------------------------------------------------------------------
When answering phone calls with headphones plugged in sound comes through clearly. I can hear the other person just find. However, they can not hear me.
Is there a way to enable the internal microphone on the device while having headphones connected?
Thank you.
I am looking for the same solution. I hooked up my phone to my car with aux input to listen music in the car. but when I get a call I have to unplug it because the mic on phone is disabled..if anyone knows a fix for it it would be a huge favor.Thanks
hayaticik said:
I am looking for the same solution. I hooked up my phone to my car with aux input to listen music in the car. but when I get a call I have to unplug it because the mic on phone is disabled..if anyone knows a fix for it it would be a huge favor.Thanks
Click to expand...
Click to collapse
Yeah same deal, Bluetooth headphones would apply aswell.
You could get an adapter that has a built in microphone. They're available and not expensive.
PerfAlbion said:
You could get an adapter that has a built in microphone. They're available and not expensive.
Click to expand...
Click to collapse
But that is just a workaround. The problem is still there. I don't think it is that hard to fix, but I don't know how or where to mess up with it.
Also, it would be interesting if there was an option to use Kaiser's automatic answering after 3 ring with the speakerphone.. but that's a little offtopic I think
subscribing. I would also like to know.
TurtleTech said:
When answering phone calls with headphones plugged in sound comes through clearly. I can hear the other person just find. However, they can not hear me.
Is there a way to enable the internal microphone on the device while having headphones connected?
Click to expand...
Click to collapse
When a headset is plugged in the mini usb port the unit (just like any other phone) it goes into headset profile and switches mic input to the headset.
Are you using the supplied headset (mini usb) or an adapter for 3.5mm jack?
The supplied headset enables the mike (in the small bulb on the cable) for talking and most people lift this to their mouths to talk on any phone.
If anyone is having this problem with a BT headphone (not headset!) then check in BT settings that the headphones are not set for 'Use as BT headset' only for 'Wireless Stereo'.
Hope this helps.
Farsquidge, Thank you for your response.
Using an adapter that outputs 3.5mm connection that connects to normal headphones or AUX connection for stereo.
You said that the phone switches profiles. When a 3.5mm external headphone is connected the phone switches to headset mode and with this we can assume that the phone is looking for external microphone aswell.
Solution: Change the headset profile to use the internal microphone rather than looking for a external microphone.
Goal: Using 3.5mm headphones with phones internal microphone.
Thank you.
TurtleTech said:
Farsquidge, Thank you for your response.
Using an adapter that outputs 3.5mm connection that connects to normal headphones or AUX connection for stereo.
You said that the phone switches profiles. When a 3.5mm external headphone is connected the phone switches to headset mode and with this we can assume that the phone is looking for external microphone aswell.
Solution: Change the headset profile to use the internal microphone rather than looking for a external microphone.
Goal: Using 3.5mm headphones with phones internal microphone.
Thank you.
Click to expand...
Click to collapse
Yep, you got it. You need an 'intelligent' app that knows you have a headset connected (usb adapter) but no mike so it can keep the internal mike on!!
Nothing out there that is that clever but the guys doing Kiaser Tweak may be able to give you something that you can manually select the profile to enable the internal mike!!
Why not ask them???
Any ideas?
There must be a solution for this simple problem, dutty???
Does anyone have any ideas?
i think this is what you are looking for:
http://www.tracyandmatt.co.uk/blogs/index.php/2006/08/18/orange_spv_m3100_headphone_adapter_hack
but what WOULD be nice is that it's a male adapter, so you don't need the 3.5mm converter.
I started to put together something like this, just have to get off my butt and perform the splicing! Otherwise, that is how it's done.
Anyone know if there's a web site selling the USB adapter to 3.5mm male adapter and not female?
tvos
Right here budy:
http://www.javoedge.com/reflexeshop/productCatalog/getProduct.do?poid=1717&pbmId=14410
dude... you rock!! I have been looking for ages something like this for previous PPC's.
I know this is asking the world.. what about shorter length, make retractable w/microphone for phone operation?
anyways, i am placing my order today!
i love XDA Dev.. should have switched over from the other forums! this place doesn't sit still and the questions & answers are always there!
THANK YOU!!!
tvos
No problem. I generally dont post much. But I just couldnt let some be wondering all their life.
Theres this but its female:
http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=866
I thought about getting it but I cant justify $30 for it. For a little more I could get BT ones.
just ordered the product today. will let you know how it works!
I am just glad someone stepped up and finally created a product that is a male adapted direct input to female. This is a rare item!
Thank You!
tvos
Thank you gentlemen. Solution: An adapter with microphone and 3.5mm output.
Just recieved the cable today!
its excellent and fits snug! - wraps around the proclip cradle and directly into the female input car radio.
Yes, if they could make this with a mic adapter, that would be cool.
But for now, this beats rigging something from radio shack - splicing a few wires together just because someone is picky with length..
tvos
Awesome Im Getting One!!!
Hi All,
I'm wanting to use my Diamond in the car to replace both my old iPod and sat-nav, while still having phone functions available. There are a few things I'm not happy with, so I thought I see what other people are doing.
I have a car head unit with a direct 3.5mm line-in, which used to have the iPod on the end. The Diamond works fine plugged into this through an ebay 3.5mm\USB adaptor.
If I plug the 12v>USB charger in, I get a whine over the audio - not a big problem, it's just a ground-loop, so I'll stick an isolating transformer in-line.
The main problem I have is switching between the internal speaker and the external output. If I want to have the radio on, rather than MP3, I have to unplug the adaptor, and plug the charging cable in direct, so that I can keep the battery charged - not ideal. This way I can hear the TomTom voices through the internal speaker, but it seems wrong to have to swap leads this way.
The other main problem is if I have MP3 and TomTom all through the stereo, and I get a call, I can hear the call over the stereo, but can't speak, as the Diamond is expecting an external microphone.
I guess what I need is a utility to force only the internal microphone to be used, and to allow me to force the internal speaker when I want to use the radio. It there such a thing?
I think one of these car holders has an option to plug in charger and usb-3.5mm jack adapter at the same time....
http://www.dsldevelopments.com/brodit/Holder/HTC+Touch Diamond-Brodit-Holder.asp
If i had the skills i'd try to figure out a hack to pause/mute the mp3 and mute satnav when in a call... but I don't.
That's not the problem - I can plug in the charger and 3.5mm audio at the some time, but that redirects all the audio to the car stereo, and disconnects the mic. Removing the adaptor and plugging in just the charger enables the microphone, but all my MP3s then are played through the internal speaker.
What I need is a utility to force the internal microphone to be used _all_ the time, and let me choose when to use the internal speaker when a headset is detected.
I don't suppose anyone knows how the Diamond recognises a headset? Is there a resistor link across a couple of the pins in the 11pin connnector? I'm just thinking I could make up a cable with a switch to break that contact, and 'virtually' disconnect the headset when I want the radio, or need the microphone active during a call.
You could try this program. It seems to be a virtual switch between the earpiece and external speaker. I use it a a solution for skype and other voip programs that only work through the external speaker, but the works the other way as well.
headset instaled but need phone mic allways enable
Hello,
Kaysee_sw said:
The other main problem is if I have MP3 and TomTom all through the stereo, and I get a call, I can hear the call over the stereo, but can't speak, as the Diamond is expecting an external microphone.
I guess what I need is a utility to force only the internal microphone to be used, and to allow me to force the internal speaker when I want to use the radio. It there such a thing?
Click to expand...
Click to collapse
I have the same issue of kaisee.
I use the diamond as mp3 player in my car stereo (aux-in) and i need the mic allways available to use the phone without disconect the usb or audio plug.
In my old magician this worked just fine becouse the mic was allways available.
Is the .exe posted by dctech the answer(thanks man) ? has anybody tested ? is it reliable or there is another solution?
Thanks
You need a proper bluetooth car kit to allow this. Parrot ones are very good. If you want to listen to music as well as phone calls and sat nav i would suggest that you get one with both handset and A2DP bluetooth profiles. There is a workaround app you can use to get music through a car kit with just a handset or headset profile but the quality is mono and very poor
I don't really know how to explain...
I use my Nexus one in my car for calls.
I use a jack cable which is plugged into the radio. So I can hear my partner over the speaker in the car. Very good.
But, the others can't understand me. It's crappling all over.
When I put the cable out of the jack and use the normal hands free on the phone, everything is fine and the others understand me very well.
By plugging into the car radios jack, it starts with crappling my voice again.
Does anybody have the same problem? Or is it fine on your Nexus all the time?
Formel-LMS said:
I don't really know how to explain...
I use my Nexus one in my car for calls.
I use a jack cable which is plugged into the radio. So I can hear my partner over the speaker in the car. Very good.
But, the others can't understand me. It's crappling all over.
When I put the cable out of the jack and use the normal hands free on the phone, everything is fine and the others understand me very well.
By plugging into the car radios jack, it starts with crappling my voice again.
Does anybody have the same problem? Or is it fine on your Nexus all the time?
Click to expand...
Click to collapse
sounds like the phone might be trying to find a microphone in the radio
Yes, could be. But why? What can I do?
It was very cool when somebody can try it, if it works on other NexusOne.
well the default headphones had a speaker in them so the jack is made to work as a speaker jack and a mic jack. however im not sure why it is expecting a mic when there is no information being sent back to the phone.
Simple expanation, I think - noise canceling functions.
When you're in speaker mode, it's settings are probably changed to account for a voice coming from a distance and being roughly equal for both mics, while when in regular mode it's working and expecting significant signal difference. When it doesn't get it - since you're speaking from a distance - it doesn't "think" you're talking, and cancels your voice partially as it would cancel outside noise.
There is a hack somewhere in General or Dev section, how to disable noise canceling. You might try.
OK, when I find it.... Sounds good
I have searched everywhere and can't seem to find a answer to this...
I use a phone cradle in the car, using my topaz as my music player, connecting my phone to my car stereo with a male-male 3.5mm audio jack.
I want to be able to steam music via bluetooth from any other compatible phone / device to my phone, meaning I don't have to trail cables everywhere when a passenger wants to play something.
I would have thought this to be a simple-ish thing to setup but cannot find any information on how to do it. Is it even possible, and where would I start if it is?
I also want to use my on-board mic when the headset is plugged so I can have call audio over car speakers, although iv been led to believe this isn't possible because of hardware reasons, can anybody clarify that?
Apologies if this is in the wrong forum, not really sure where it should have gone.
If I understand you correctly, you want to stream music TO your phone over BT from another device? Not possible.
For hearing call over speakers and using mic, you need to get the M-F w/built in mic.
I too don't think it will be possible to stream music from another device to your phone except if you transfer the entire music mp3 file via bluetooth to your device and then play it from there.
Regarding the possibility of using the device's microphone whilst using the car speakers for sound, again I'm afraid I don't think this is possible. I have a similar set-up to you in that my TD2 is connected to an FM transmitter which also charges my TD2 at the same time in a nice cradle. The TD2 thinks it is connected to a headset when cradled. The microphone is inactive in this state which is a shame as it would have made a good hands free system if it were to be active....
mitsi said:
I too don't think it will be possible to stream music from another device to your phone except if you transfer the entire music mp3 file via bluetooth to your device and then play it from there.
Regarding the possibility of using the device's microphone whilst using the car speakers for sound, again I'm afraid I don't think this is possible. I have a similar set-up to you in that my TD2 is connected to an FM transmitter which also charges my TD2 at the same time in a nice cradle. The TD2 thinks it is connected to a headset when cradled. The microphone is inactive in this state which is a shame as it would have made a good hands free system if it were to be active....
Click to expand...
Click to collapse
I use this set up as well. You just need the cable with the built in mic.
My RF Transmitter has a male plug, So I found the HTC cable that has the HTC USB to Female with built in mic. This is my basic set up.
Bruce Inman said:
I use this set up as well. You just need the cable with the built in mic.
My RF Transmitter has a male plug, So I found the HTC cable that has the HTC USB to Female with built in mic. This is my basic set up.
Click to expand...
Click to collapse
That set up looks great Bruce, but I don't want to be fiddling about plugging in so many cables with so many wires visible. Brodit does something similar too, all in a cradle with an extended wire so you would be able to hide all the cables....
Not sure to whom I should direct this. The issue I'm having is when using headphones with a regular TRS plug the onboard mic is disconnected. This makes sense as most people use headsets but it would be great if the onboard mic could be forced on somehow so I could keep using my favorite headphones. Right now I'm have to take my headphones off and pull the plug for calls.
EDIT: To be clear I'm looking for a software solution to my problem.
Anyone think it would be possible to cook up a script to force the phone mic on while using standard headphones?