Titanium backup on GB rom - Galaxy S I9000 Q&A, Help & Troubleshooting

When backed on TB in XXJVU , I installed XXJW6 but in Restore there was nothing ! ICS is so easily backed up and restored but why does GB shows no restore ? Besides, it's very slow backing up too !
Any suggestions please ?
Thanks !
Sent from my GT-I9000 using xda premium

Did u format sd-card?
Or try enter tb. once more and wait for it to load your apks.
There is nothing different restoring apps on gingerbread than ics

Related

[Q] reinstalling my backed up rom

Hi, I did a backup of my whole phone with CWM, can anyone tell me how to reinstall it cos Iwant to go back to stock and upgrade through kies. thanks
In cwm choose restore . This should restore the system partition.
Sent from my GT-I9000 using XDA Premium App

[Q] How to go back to stock rom

Hey guys. I have a question. I have flashed mcr rom on my o2x recently but before flashing, i saved a backup in cwm.
Now that i want to flash back to stock rom and kernel and the exact same original settings and rom, can i just restore using cwm or what do i do?
I am from Singapore using Starhub.
Thanks guys
Sent from my LG-P990 using XDA App
The main problem is that MCR will have converted your partition to ext4, which the stock ROM can't read. As far as I understand, there are two options
1. Use http://android.modaco.com/content/l...3-for-converting-your-device-er-back-to-ext3/ but make sure you have the backup on your SD card, so before you reboot, you can restore it (if you reboot without restoring, bad things happen).
2. Use nvflash to put the stock ROM back on, and then restore your CWM backup.
But. . . someone who has done this may be able to confirm - if you want to be extra safe, check in the MCR thread.
Thnks for the reply! So cwm is actually not really a rom backup image?
Sent from my LG-P990 using XDA App
It is, but because the disk format is changed when you install MCR, I don't think you can restore it, without changing the disk format back first (I guess it depends how low level the image goes, maybe?)
zhehao said:
Thnks for the reply! So cwm is actually not really a rom backup image?
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
Pretty sure NAND restore would be fine.
I see.
So by right what i have to do essentially is to:
1. Convert back to EXT3.
2. Make sure my NANDRIOD backup is in SD Card.
3. Off phone and go into CWM then recover NANDRIOD.
Should be all?
Don't quite understand the nvflash. May i know what is that?

Mobile odin pro or titanium back up????

Hey
Im abit confused as to what these programs do. Now ive yet to root but i nees to know do i need both of these or do they all do the same thing. I would like to try out some roms and maybe install themes etc but im confused which i need or if i need any of them at all lol
Appreciate the help....rooting a desire was so much easier.
Thanx
Sent from my GT-N7000 using XDA
Mobile odin is rom flasher, just like pc odin. What you can do with pc odin, same you can do with mobile odin, without need of pc. Even i can say better then pc odin.
Titanium backp is backup tool for your data, like watever stuff you have installed.
You need both
Here short order how you can go.
Use titanium to backup data
Use mobile odin to flash rom
Wipe data (with safe kernel)
Restore data with titanium
Sent from my GT-N7000 using xda premium
One more..
U can flash kernel n modem using mobile odin..
and only tar extension that can flash through mobile odin for rom n kernel n bin extension for modem..
Sent from my GT-N7000 using Tapatalk 2
read app specifications and forum. its all there
Sent from my GT-N7000 using Tapatalk 2
What if there's a need to back up e existing rom before using Odin or mobile odin?
In case something goes wrong? Or does it mean 'starting from stock all over'?
Or does titanium perform full backup of rom aka system other than apps n data?
To backup complete rom + data Inc application use nandroid backup.
Titanium backup only apps and data not rom.
Sent from my GT-N7100 using xda premium
Thanks. And nandroid is only possible thru CWM aka custom recovery?
bonderbond said:
Thanks. And nandroid is only possible thru CWM aka custom recovery?
Click to expand...
Click to collapse
Yes..and I think it is also possible thru a PC, but havent tried it personally..
dont forget efs backup, none of these apps do that
Sent from my GT-N7000 using Tapatalk 2
Use k-tool from playstore for EFS backup/restore..

[Q] Nandroid Restore CM10 --> ICS

Hi All,
Is it OK or Possible to Nandroid restore my old Stock ICS ROM from CM10 CWM ROM(Recovery) ?
Thanks.
Yes. Done it many times.
Sent from my GT-N7000 using Tapatalk 2
You're on a safe kernel, so it will be fine, be aware when back on ics if on stock kernel you need to be careful or install safe kernel.
Sent from my GT-N7000 using xda premium
yeah I guess if he made a nandroid backup of a stock rom.. 99% it has a safe kernel in it.
Thanks for the help guys ... :highfive:
& I hope the other way is also OK (Restore CM10 Nand backup from ICS CWM recovery) ?
ya
nokiamodeln91 said:
yeah I guess if he made a nandroid backup of a stock rom.. 99% it has a safe kernel in it.
Click to expand...
Click to collapse
SpyderTracks said:
You're on a safe kernel, so it will be fine, be aware when back on ics if on stock kernel you need to be careful or install safe kernel.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sorry if I am asking/saying something wrong..will the Nandroid restore work if currently using a different kernel than the backed up one? Read somewhere that current kernel & backed up kernel should be the same for the restore to happen properly..
no.. u can restore the nandroid made on any kernel. just that when the nandroid restore completes the kernel will be that inlcuded in the nandroid
Thanks guys :good:
You may well face bootloop after restore, just clear cache and dalvik from recovery, should clear it fine.
Sent from my GT-N7000 using xda premium
clear cache and dalvik from recovery + format /system
then restore from recovery
(recomended) restore using recovery & kernel you using for backup
works great for me

[HELP] Black screen after restored CWM Backup.

Hello Everybody,
Last week I have made a CWM backup of Stock 4.1.2 with Philz touch recovery and then installed CM 10.2.
Yesterday I flashed PhilZ-cwm6-DDLSC-ODD-5.11.2-signed.zip and rebooted into recovery to restored my previous CWM backup of stock 4.1.2
I did all wipes and restored backup successfully. After rebooted I can see only a black screen with status bar with three icons (battery,time and network).I hve tried for two times but same problem.Then I reinstall CM10.2 using recovery.
I didnt understand where I have mistaken.
Please tell me what to do? I want to restore my backup.
Thanks in advance.
Sent from my GT-N7000 using xda premium
did you check if the restore preload was selected?
nokiamodeln91 said:
did you check if the restore preload was selected?
Click to expand...
Click to collapse
I dont understand. I mean how to check it?
Thanks...
Sent from my GT-N7000 using xda premium
Some where in misc nandroid settings.
You mean I have to check Preload after restore my cwm backup?
Sent from my GT-N7000 using xda premium
You have to check it before restoring the backup as stock 4.1.2 uses preload partition for a lot of apks.
I really don't get what you are asking. You have to go to nandroid setting and place x besides include preload.
nokiamodeln91 said:
You have to check it before restoring the backup as stock 4.1.2 uses preload partition for a lot of apks.
I really don't get what you are asking. You have to go to nandroid setting and place x besides include preload.
Click to expand...
Click to collapse
Ok,No problem.I have Installed SweetRom 10.5 Black for 4.1.2.
And Thanks for your kind help.
Sent from my GT-N7000 using XDA Premium 4 mobile app

Categories

Resources