[Q] Phone is completely dead after attempted flash via Heimdall? - Galaxy S I9000 Q&A, Help & Troubleshooting

Edit: Sorry, but after doing battery-out for a while (tried it earlier, but was apparently too stressed), it came back into download mode. So it's not completely dead, and I will try to see if I can get it working again. Sorry for wasting your time and XDAs space!
So, after 2 years of excellent service I replaced my trusty old i9000 with a brand spankin' new i9300. When doing a thorough reset of my phone prior to selling it, it now has died completely on me. Let's walk through this:
-First off, I went into CWM and did all the wipes and formatted internal SD-card. (Was running AOKP 4.0.4.)
-Secondly, put phone into Download mode and used Heimdall on a Mac to repartition and insert completely stock rom. Followed instructions I found here on how to flash using Heimdall, and downloaded a package named I9000XXJVU which I extracted and did everything according to the specifications. Downloaded a 512.pit-file and used as well.
-Thirdly, and lastly, I tried to flash.
This is what Heimdall said:
[quote="Heimdall]Uploading PIT
ERROR: Failed to confirm end of PIT file transfer!
PIT upload failed!
Ending session...
Rebooting device...[/quote]
Now, the device is COMPLETELY dead. No Download mode, no nothing. So, what the hell did I manage to f**k up now, and how do I solve it? I had only used Odin in Windows before, and has never had a problem like this.
Edit: Sorry, but after doing battery-out for a while (tried it earlier, but was apparently too stressed), it came back into download mode. So it's not completely dead, and I will try to see if I can get it working again. Sorry for wasting your time and XDAs space!

I think u f..... up the bootloader and that's bad.but try USB-jig u can buy it on ebay and are guides on utube how to use it,if the jig works u can get into download mode then it's easy recoverable.
Try pull out battery and leave it out for 30 min,If u are really lucky u can boot into download mode

Related

[Q] Captivate Boot Loop after Odin one click

Hello all and thx in advance.
ATT Captivate batch 1010
I had Cognition 2.3 I think on my phone and it worked great however I wanted to try a different ROM so I attempted to restore my phone to stock using ODIN one click. I realized after that that I never disabled the voodoo lag fix or deleted my user data.
Now I am stuck in a boot loop that either shows the white ATT logo screen flashing every couple seconds or the phone off charge screen re starting every couple seconds.
I bought a USB Jig and it works great so I can get into D/L mode easily but I have tried flashing the stock firmware at least 6 times now using different machines, different ports, different versions of ODIN and I've searched around these forums and others for several hours trying to find a solution. It seems that I needed to erase my user data in recovery mode and removed the lag fix before I did this but it is what it is. I have tried to get to recovery mode to no avail. All I can get to is download mode.
Any ideas on what I should/can do?
any help will be greatly appreciated.
Rob
Aircraft123 said:
I realized after that that I never disabled the voodoo lag fix or deleted my user data.
Click to expand...
Click to collapse
Neither are necessary for Odin use.
ATT Captivate batch 1010
Click to expand...
Click to collapse
I think that you may need to use the Froyo Odin (JI6).
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
CM7
please help, i have the same problem, was flashing back to stock from a serendipit 5.12 so that i could get the 6.0 version... all went as planned until odin said "reset" which was my cue to unplug and that the process was complete.... i unplugged the phone and tried to reboot and now it does exactly as the first post described, at&t logo then black screen, then back to the at&t logo then black screen again... my computer doesnt recognize my phone none of the methods of getting to download screen will work... no matter how many times i pull the sd, sim, and batt, no matter the button combination i use or which order i use them in.... same result... i cant afford a new phone i need help, i will donate also... i knew this stuff was over my head, but "curiosity killed the cat" i guess...
I had the exact same problem. Try this method, it's the one that worked for me when all others failed... But remember to follow it EXACTLY.
1. Pull out the battery.
2. Hold Volume UP+DOWN (Don't let go of them until you see the download screen).
3. Stick in the USB (which is connected to the computer).
4. Put the battery back in.
If not, you might need to get a USB Jig.
That Froyo Odin link worked!
Thanks guys I flashed to Froyo and it worked!
I've since flashed clockwork recovery and gotten Serendipity 6.1
As far as getting into download mode I had to use one of the USB jigs.
I ordered one from the guy who does the rom reviews but you could make one as well.
On another note the new ROM seems to be discharging my battery really fast
Before I start investigating it as a problem I am going to charge it completely then let it discharge completely to calibrate it.
Thanks again guys
Rob
I just fixed mine last night, I had the exact same problem because of the exact same upgrade. What you need to do is get or make a usb jig. There's a couple resources around here for how to do it.
Here's a video showing how to make one:
http://www.youtube.com/watch?v=Rdn5GoRjhn0
Once I got my phone into download mode, I used Darky's ROM Resurrection Edition ( http://forum.xda-developers.com/showthread.php?t=940671 ) to restore my phone. Just scroll down to where it says "Files Needed" and download the Captivate version. Once you have that downloaded, use the jig to put your phone into download mode and follow the directions in the Darky's video (jump to about 2:30 into the video). Once I had my phone booting, I used clockwork to install Serendipity 6.
Hope that helps you as much as it helped me!!
went to radio shack, got all the stuff to make a jig and i was able to get my phone into download mode! now to try darko...... thanks everyone!
odin doesnt reconize phone
which odin3 are you using? 1.7? or the one click to stock?
you mentioned you had the bootloop problem before, so you should be using odin 1.7 with 2.2 stock.
open odin
get phone into download mode with your nice jig
unplug jig and plug in computer
box in odin should turn yellow.
And make sure you have the correct drivers installed. CRUCIAL.
Multiupload links not working
I'm stuck in the same situation as the OP.
I've been trying to use the method mentioned in the quote below, but the multiupload links are not working for me. I've been trying for 2 days to get to these files.
Breakin' Ranh said:
**Another thing, read the whole thing before doing it! If you're not confident whatsoever about this process, don't do it**
1. Download the following:
I897UCJH2 Firmware
password: samsung-firmwares.com
http://www.multiupload.com/B5OFPPOJFZ
512 PIT
http://www.multiupload.com/I5WICSBFJ1
ODIN3
http://www.multiupload.com/DLS7TWUVPY
Click to expand...
Click to collapse
Here's a link to the thread for more clarification:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36I've
Would anyone happen to have these files and be willing to share them?
^
Have u tried the Odin or Heimdall One Clicks in the development stickied thread ??
Sent by XDA Premium App
Yep, tried the Odin one click - caught in a boot loop with the AT&T Logo. I have yet to try the Heimdall one.
UPDATE
Tried Odin and Heimdall One-Clicks - unsuccessful. I'm think I will need the stock Eclair firmware file with Odin and the pit file.
lllll Nova lllll said:
Yep, tried the Odin one click - caught in a boot loop with the AT&T Logo. I have yet to try the Heimdall one.
UPDATE
Tried Odin and Heimdall One-Clicks - unsuccessful. I'm think I will need the stock Eclair firmware file with Odin and the pit file.
Click to expand...
Click to collapse
You ever get this to work? - I'm in a similar situation. all flashes 'work' but get stuck at ATT on boot. Not sure Eclair is an option or not since mine is a refurbished phone that started on 2.2
ScruffMcG said:
You ever get this to work? - I'm in a similar situation. all flashes 'work' but get stuck at ATT on boot. Not sure Eclair is an option or not since mine is a refurbished phone that started on 2.2
Click to expand...
Click to collapse
If one-clicks aren't working, you might need to grab the full version of Heimdall or Odin and flash a full package. Some of the newer phone builds don't like one-clicks.
^ +1
See this thread...the original Stock i897ucKK4 thread... http://forum.xda-developers.com/showthread.php?p=19587108
Then see post #57 for the regular Odin to use and instructions on what to do with the firmware.
Sent from my SAMSUNG-SGH-I777 using xda premium

[Q] How do i get my softbricked phone back to normal?!

Hi guys, I need some help..
I have had my SGS for over a year now and decided today i wanted to root it and do all the stuff that comes with that... anyways so i rooted it and then tried installing cyanogenmod but i got a bootloop which i thought fair enough ill just put the phone back into download mode and download my firmeware of i9000xxjvt again. this was no problem, however... this unrooted my phone i think becasue i didnt see superuser or cwm in my apps again. so then i tried rooting my phone again but i think i picked the wrong file in the PDA part of odin and my phone screen turned off and ODIN said fail or somethign similar. Then i tried turning my phone on and it now has this icon;
well i cant post links but if you go on tinyurl and add "/6o3dt8y" after it you'll see
im so scared iv ruined it, i dont have insurance but it is covered under my parents house contents cover.. i dont wanna have to go through that though. any suggestions? i havent tried removing the battery to turn it off btw it's still on that screen because im scared of doing further damage.. dont know how long the battery will last tho.
Ineedhelprealbad said:
Hi guys, I need some help..
I have had my SGS for over a year now and decided today i wanted to root it and do all the stuff that comes with that... anyways so i rooted it and then tried installing cyanogenmod but i got a bootloop which i thought fair enough ill just put the phone back into download mode and download my firmeware of i9000xxjvt again. this was no problem, however... this unrooted my phone i think becasue i didnt see superuser or cwm in my apps again. so then i tried rooting my phone again but i think i picked the wrong file in the PDA part of odin and my phone screen turned off and ODIN said fail or somethign similar. Then i tried turning my phone on and it now has this icon;
well i cant post links but if you go on tinyurl and add "/6o3dt8y" after it you'll see
im so scared iv ruined it, i dont have insurance but it is covered under my parents house contents cover.. i dont wanna have to go through that though. any suggestions? i havent tried removing the battery to turn it off btw it's still on that screen because im scared of doing further damage.. dont know how long the battery will last tho.
Click to expand...
Click to collapse
Hey, first of all, don't panic, there's nothing wrong that can't be fixed. You should still be able to put your phone into download mode. After that, just flash it with the correct files via Odin, that's all. I recommend downloading jvu firmware instead of jvt. After that you should be able to flash a custom kernel, my recommendation is Semaphore (look for it in the development section). Then flash cyanogenmod via recovery menu. If it starts flashing, then you get into a bootloop, just pull your battery at some point and pull your external sd card. (I had this issue too.) Then put your battery back (but not the sd card) and you will be able to install it correctly. Cheers
Sent from my sgs Please hit thanks if I helped!
You have the i9000? Because I see a restore procedure for i9001 on the server your 'bsod' image is hosted: http://www.broodplank.net/flashsamsungi9001.php
The only think different is the firmware you need and the Odin version. Don't use the multidownloader, but for instance Odin3 v1.85.
I'd recommend cf-root kernel, it's "rooting for beginners" and still enough to be able to flash Cyanogenmod. Link: http://forum.xda-developers.com/showthread.php?t=788108
Just pull out the battery. I too had a lot of soft bricks this week and you wouldn't believe how many times I had to pull out the battery, lol.
Just try to flash some stock gingerbread rom's and see which one makes your phone work again.
If you can't get into download mode anymore. Pull out the battery, connect your phone to your pc via usb, push volume up and down simultaniously and lastly put in the battery. It should boot up into download mode.
Thanks so much guys I was really scared I ruined the phone. Pulling out the battery worked and putting it into download mode was easy after that. I flashed jvt again because I couldn't find jvu and then flashed cyanogenmod successfully, I removed my external SD this time tyo avoid the boot loop. i will try again later with semaphore kernal first but again thanks a lot people.

[Q] Messed it up and need help

This WAS the situation before the problems:
Rooted Gingerbread rom, all working fine. Decided to unroot and install the full version of the official German ICS rom by using PC Odin. All went fine and used my Note for over two days. Because of the lags en slow responses I decided to reflash the ICS rom. From that moment on I messed it up. I've been reading and searching hundreds of posts for almost a day but didn't find a solution.
This IS the current situation:
I can get into download mode
I can get in recovery mode
However, in recovery mode I can not install a rom, every flash (CWM, both ICS and GB - even using chainfire's rom needed for rooting) stops on a random moment...but never gets it to the end, even if I wait several hours. Installing is very...very....very slow.
In recovery mode i can not restore a Nandroid backup, both ICS and GB. Every backup stops when /system has te be installed. errormessage.
In download mode I can connect my Note to PC Odin. I can select a rom and start flashing. However, after appr. 80% installation halts during "nand write start", no error message. The flashing does not finish, even after hours.
Funny is, i can install a kernel like Abyss.
So, I can't restore, i can't flash using cwm in recovery and I can't flash using PC Odin. My device seems not fully bricked. The max I get when rebooting (knowing that the process has not finished) is the triangle screen.
Any advise is appreciated.
Do not flash thru CWM... Flash a good GB kernel like "franco.Kernel" but thru PC Odin then u can flash whatever u want from franco's CWM... Good luck
Don't need help anymore
Note is officially bricked. After several attempts to recover from a softbrick the screen of my Note didn't turn on anymore. No button or button combination works, no recovery and no download mode, just a black screen.
Ce said:
Don't need help anymore
Note is officially bricked. After several attempts to recover from a softbrick the screen of my Note didn't turn on anymore. No button or button combination works, no recovery and no download mode, just a black screen.
Click to expand...
Click to collapse
Flat battery? It's also possible that it's just the screen that's not working. Try entering download mode "blind". So hold power+home+vol down for ~10 seconds, then press vol up. Hook it up via usb and see if Odin can recognize it.
Thanks, didn't think of that. But unfortunately no response from the device.
So now that it looks like your phone is officially bricked, I think you should just take it to Samsung and make up a story. Like you were updating your software with Kies and something happened and the phone is just not booting up.
I am sorry you bricked your note though..
try AMORA Filemanager.. flash via recovery and you have a file manager,,, take a look on your partitions
just my idea, you got nothing to lose
musashiro said:
try AMORA Filemanager.. flash via recovery and you have a file manager,,, take a look on your partitions
just my idea, you got nothing to lose
Click to expand...
Click to collapse
I would like to but it's very hard when you can't see anything on the screen...
Maybe it's just the battery, try to charge it externally and try a JIG also
Sent from my GT-N7000 using XDA
Just a quick, final, update.
My Note was superbricked. Had to send it to a Samsung Service Center. No additional questions were asked. Samsung replaced the mainboard. Didn't have to pay anything.
Great service!!!
try this out buddy, do it on your own risk!!! anyways you have messed it up.
Ce said:
This WAS the situation before the problems:
Rooted Gingerbread rom, all working fine. Decided to unroot and install the full version of the official German ICS rom by using PC Odin. All went fine and used my Note for over two days. Because of the lags en slow responses I decided to reflash the ICS rom. From that moment on I messed it up. I've been reading and searching hundreds of posts for almost a day but didn't find a solution.
This IS the current situation:
I can get into download mode
I can get in recovery mode
However, in recovery mode I can not install a rom, every flash (CWM, both ICS and GB - even using chainfire's rom needed for rooting) stops on a random moment...but never gets it to the end, even if I wait several hours. Installing is very...very....very slow.
In recovery mode i can not restore a Nandroid backup, both ICS and GB. Every backup stops when /system has te be installed. errormessage.
In download mode I can connect my Note to PC Odin. I can select a rom and start flashing. However, after appr. 80% installation halts during "nand write start", no error message. The flashing does not finish, even after hours.
Funny is, i can install a kernel like Abyss.
So, I can't restore, i can't flash using cwm in recovery and I can't flash using PC Odin. My device seems not fully bricked. The max I get when rebooting (knowing that the process has not finished) is the triangle screen.
Any advise is appreciated.
Click to expand...
Click to collapse
i was not a member when i commited this mistake. but then big thanks to this community it helped me back from softbrick.
first you do is install a stock kernel of ics on your note go into recovery and just clear cache partition, thats it no wipe/data factory reset.
then,
install the pit file from this thread, also read it completely before proceeding. http://forum.xda-developers.com/show....php?t=1667886 , hoping yours is 16gb version and also read this thread for additional info but its quite complicated for me so im just telling you the direct method and hopefully itll get your note back to work. so once you download the 16gb pit file unzip it and in the unzip folder you will find a separately lying pit of 16gb stating patched-standard thats the one you want.
then,
goto samfirmware and download the latest ics firmware(i downloaded the indian one as it is in file .tar),
unzip it till you get .tar file.
open odin- click pit-select 16gb patched standard pit- check wether repartion is ticked- click pda-select the .tar file you extracted connect your phone and start. this time i wont stop at factory.fs.....
NOTE THAT AFTER THIS PROCEDURE IS COMPLETED SUCCESSFULLY YOUR INTERNAL STORAGE WOULD BE ONLY 8GB INSTEAD OF 11 GB STOCK WHICH YOU WERE GETTING.
I REVIVED MY NOTE THROUGH THIS PROCEDURE. PROCEES AT YOUR OWN RISK.
one your phone is working you'll be able to reset the counter with a jig and get your phone under warranty and get your motherboard changed by teliing at the Samsung Service that you are getting only 8gb instead of 11gb you used to get earlier(warranty only if you had any).
hope this helps mate.
BEST OF LUCK!!
A BIG HUGE THANKS TO hg42.....

bricked....

Hi so I was trying to use CF to root my phone and ended up screwing it somehow and bricked. I thought I'd followed the instructions well enough but I obviously did something wrong. Now my phone is stuck saying it needs to recover with Kies. This is my first Samsung phone but I'm not new to Android.
I tried installing the stock firmware through ODIN but everytime I flash it gets to installing the system ext4 and fails. I also wasn't able to recover using Kies(not even sure how you use it tbh).
If anyone could help me it would be mucho appreciated. I'm pretty pissed at myself right now.
re: not bricked
cronos1388 said:
Hi so I was trying to use CF to root my phone and ended up screwing it somehow and bricked. I thought I'd followed the instructions well enough but I obviously did something wrong. Now my phone is stuck saying it needs to recover with Kies. This is my first Samsung phone but I'm not new to Android.
I tried installing the stock firmware through ODIN but everytime I flash it gets to installing the system ext4 and fails. I also wasn't able to recover using Kies(not even sure how you use it tbh).
If anyone could help me it would be mucho appreciated. I'm pretty pissed at myself right now.
Click to expand...
Click to collapse
Your phone is NOT bricked. If it was the screen would not even go on.
Have you tried going into recovery mode (VolumeUP/VolDown/PowerButton)
and once in Recovery Mode do a factory reset or Data Reset forgot what the
exact wording is in the stock recovery.
If you flashed twrp recovery it's ok too, just select "factory reset".
After doing that the phone should no longer display anything about Kies.
If you get to the twrp recovery screen you should be able to flash a stock
rooted rom without any issues.
If all you get is the stock recovery screen then you should be able to odin
flash the official Samsung Note 4 kitkat 4.4.4 NJ7 firmware which you may
need to download the firmware from http://SamMobile.com if you don't
already have it. (be sure you have the correct firmware for the Note 4 N910T).
Be 100% sure that the phone is FULLY POWERED DOWN before going
into Download Mode to avoid odin errors and issues.
Good luck!
Thanks man. I had tried Odin at my office and nothing doing.
Got home took my time and was real calm about things and voila. May have been an md5 issue with the firmware file. Just relieved I didn't have to RMA it.
cronos1388 said:
Thanks man. I had tried Odin at my office and nothing doing.
Got home took my time and was real calm about things and voila. May have been an md5 issue with the firmware file. Just relieved I didn't have to RMA it.
Click to expand...
Click to collapse
Can you check for the file with md5 before you flash from your phone? I forgot where to dig for this info.
All I I have done before is on my cook rom file, I just open it with WinRAR and test for error. If no error, then its good.
On my Home PC I have a program that will put a check mark next to a file if it matches the md5. I also have Winrar at home.
I was just using the default Windows zip program and I have had problems with that and installers/roms in the past.
The only other things I did different were I removed the SD card and installed the drivers before plugging my phone in instead of letting Windows download them automatically.
I also removed the battery after I left work so it was out of the phone for a couple of hours.
The final thing I did was calm down lol after the initial shock of seeing a softbricked screen on my brand new phone.
I'm all rooted now with TWRP and running Hyperdrive so it's all smooth sailing from this point forward.
You should check md5 on phone once you done transferred to phone from PC
BAD ASS NOTE 4

Note can't be flashed by Odin

Once upon a time my Note stopped booting (was on a custom ROM, can't easily recall which - but it had been working okay for quite a while). I didn't worry too much about it, because I already had a new phone - so I just put the Note away in the closet saying to myself, when I find some time I'll flash to stock and take it from there.
Fast forward a couple of years, and my no longer new phone has failed (bricked itself for no good reason), so I reach for the Note, download an official Samsung ROM and fire up Odin. Phone's in download mode, Odin sees it as it should, so I proceed to flash. Odin hangs on "nand write start" and does nothing at all for 20 minutes or so.
Then I remembered that years ago I had repartitioned the Note's NAND for better storage usage, so I found a stock PIT file and told Odin to repartition before flashing. Same result.
So the TL;DR: download mode works, neither ROM nor recovery boots, Odin recognizes the phone in download mode (sometimes), but can't flash (just hangs). Any suggestions?
Hi,
I have the same problem, any progress for you?
/RR
svpan said:
Hi,
I have the same problem, any progress for you?
/RR
Click to expand...
Click to collapse
No progress at all. Had other stuff to do. It would be fun to revive this old toy though. But I'm short of ideas. I guess that with d/l mode working, but unable to flash, the NAND storage is probably toast? That wouldn't be fixable?

Categories

Resources