I I've been on 5.5.893 for the longest time and figured it was time to try out .902 or .905 (not ready to make the jump to the ICS leak). This is what I've done so far:
1. First, I thought I had a clean stock backup of when I first rooted and didn't do anything to it yet. Apparently I didn't so I tried the one-click fastboot and restore I remember doing a few time when I would mess up when tinkering around.
Well, I must've had a bad download version of it or some of the files were missing because I got a tone of errors. When it went to reboot it went straight to the Fastboot menu with the (Flash Failure) error.
2. I booted up through the stock recovery and in phone info it said I was on .886 and I still had my ROM and was still rooted.
3. I tried to FXZ with RSD Lite but it wouldn't recognize my phone. I factory reset/wiped data and cache and booted back up.
4. Now I am complete stock non rooted, still says .886 and RSD Lite will only recognize my Bionic when it is booted up normally. When I decompress the FXZ file (Currently trying to FXZ to .902) and start to flash, it takes me to the Fastboot menu, but RSD Lite says it failed switching to Fastboot mode. But in the menu, it says I am connected to USB and my PDA Net says Device Attached.
Anyone know how to fix this so RSD Lite will recognize my Bionic so it will flash .902??
***I have the most updated Moto Drivers and am using RSD Lite v5.7
Make sure your using the back usb port of pc.
Try putting your phone into Fastboot menu before running rsdlite...hold volume down button and then power button.
Right now I only have access to my laptop. I've tried all USB ports and still no luck. I have gone into Fastboot before starting RSD Lite, but it still doesn't recognize my Bionic.
Once I get access to a PC I'll have to try using a back USB port.
Everythings dandy now. Have .902 rooted up and running. Finally was able to get it so I could root via motofail and restored to my last backup, ran the .902 Pathsaver and viola lol.
Thanks for the input eye_dea
Related
Hey.
Ive just tried to upgrade my milestone to G.O.T's Froyo rom.
When i tried to flash the sbf with the rsd lite i just couldnt hit start.
I had the same problem with the vulnerable rom but when i renamed it to something shorterd it worked.
I tried to do the same again but it didnt worked , i tried another sbf but it didnt worked either.
I already have the drivers.
Any one knows whats the problem is?
rename the sbf file into a short name and put it into a short path.
eg:
Code:
C:\haha.sbf
it will help you
EDIT: Wrong thread sorry.
sir_shady said:
rename the sbf file into a short name and put it into a short path.
eg:
Code:
C:\haha.sbf
it will help you
Click to expand...
Click to collapse
i still cant click the start button :\
this happened to me before. not sure what caused it but if you are in bootloader, reboot and let the phone boot normally then plug it into rsd and it should work.
now it say's FAIL and on the botton there is:
"fail flashing process. (0x7100); phone connected"
I had an issue with my RSD Lite, here is what i did to solve it.
1) took the sbf out of any directory and put it straight onto the c drive
2) upgraded rsdLite to 4.6
3) opened RSD Lite and loaded the SBF -> previously i was connecting the phone first and then trying to load the SBF, apparently the order here matters.
4) connected my phone
5) hit start when I saw my phone appear in RSD Lite.
Hope this helps,
Jonathan
it works for me,thanks.
I have two droid 3's and I rooted them both and went to install a blue theme on one of them from the rom manager app and it worked great, so I did it on my second one, too. When it was in the reboot process it never finished bootoing and it stopped at the red M. All it shows is the boot logo, not the boot animation. I have tried flashing it with rsd lite, but it always fails. Is there any other ideas as to what I should do?
You need to get rsdlite working(does it work on the other phone?). Get the drivers installed from motohelper (or reinstall) if needed, get the phone into ap fastboot and sbf to stock and go from there. Check this thread on users with the same issue.
Willis111 said:
You need to get rsdlite working(does it work on the other phone?). Get the drivers installed from motohelper (or reinstall) if needed, get the phone into ap fastboot and sbf to stock and go from there.
Click to expand...
Click to collapse
Yes, the theme works on the other phone. I will get the drivers and try again and will get back to you. Thanks for the help so far.
RaTTeDH said:
Yes, the theme works on the other phone. I will get the drivers and try again and will get back to you. Thanks for the help so far.
Click to expand...
Click to collapse
I meant rsdlite, have you ever used it with either phone without having an issue? I edited my previous post, added a link you might want to check out.
Instead of RSD Lite, I'd suggest using the quick unbricking script. It works for XT862 (maybe why Willis didn't recommend it). I have a mirror of it below. It's a ~450MB .zip file that is NOT flashable from the phone, but must be unzipped onto your desktop where you then boot into AP Fastboot, connect with the stock cable, and run a batch file from the download and it'll restore the phone's software to box stock in about 5 minutes.
http://minus.com/mB0zknQrL/
I have never used RSDLite before. So I do not know if it works. But when I am flashing it with the stock 5.6.890 it fails at step 5. It reboots the bootloader. But it fails always at step 5. Let me try the other replys...
redsox985 said:
Instead of RSD Lite, I'd suggest using the quick unbricking script. It works for XT862 (maybe why Willis didn't recommend it). I have a mirror of it below. It's a ~450MB .zip file that is NOT flashable from the phone, but must be unzipped onto your desktop where you then boot into AP Fastboot, connect with the stock cable, and run a batch file from the download and it'll restore the phone's software to box stock in about 5 minutes.
Click to expand...
Click to collapse
I have downloaded this and tried this. When I run the application moto.fastboot.exe it takes like 30 seconds and when I run the batcch file it immediately finishes and says moto fastboot is not recognized as an internal or external command, operable file or command. And finishes immediately. Sigh.
redsox985 said:
Instead of RSD Lite, I'd suggest using the quick unbricking script. It works for XT862 (maybe why Willis didn't recommend it). I have a mirror of it below. It's a ~450MB .zip file that is NOT flashable from the phone, but must be unzipped onto your desktop where you then boot into AP Fastboot, connect with the stock cable, and run a batch file from the download and it'll restore the phone's software to box stock in about 5 minutes.
http://minus.com/mB0zknQrL/
Click to expand...
Click to collapse
The unbrick script will flash a vzw rom to your xt860 and have you stuck at the M logo anyways so I wouldn't suggest trying that. If you haven't used rsdlite before and are having trouble with it now you probably need to install the drivers from the motohelper software.
1./ download the drivers (from motorola)
2./ shutdown phone and turn it on by hold m + power
3./ select ap fastboot mode, enter and plug your phone into the computer ignoring any add new hardware
4./ start the driver install and follow it through
5./ unplug and replug your phone with computer leaving it fastboot mode.
Rsdlite should show your device under listed devices when you start it up at this point and allow you to flash w/e rom. I would suggest using the iucell or brazil retail fastboot files from the xt860 fastboot thread to get your phone up.
I fixed it using CMD in Windows flashing some stuff. Thanks guys!
I was attempting to update my *.2233 build to the new *.242 last night using "House of Droid," when I completely screwed it up. For the purposes of this inquiry, we'll call it an accident... but I used the "Repair AP Fastboot error (flash cdt.bin) option. Now, when I attempt to boot, I get the following:
-----------------
AP Fastboot Flash Mode (S) (Flash Failure)
0A.61
Battery OK
OK to Program
Transfer Mode:
USB Connected
Invalid CG Version (CG: devtree)
-----------------
After hours of searching forums, I have tried the "FixCDT" application with no luck, tried to flash various versions of Android including my current build (2233), 232, 242 and 905_FXZ using RSD Lite all with the same return:
-----------------
Failed flashing process: 6/22 flash cdt.bin "cdt.bin" -> Phone returned FAIL
-----------------
When I attempt to use the FixCDT, I get the following error:
-----------------
"Writing 'cdt.bin'... INFOPreflash validation failure
FAILED <remote: >
-----------------
Is my phone toast, or is there hope?
Thanks!
i would suggest reading this forum
http://www.droidforums.net/forum/mo...-5-893-fxz-901-902-compatible-902-update.html
now remember with the .242 leak you are not able to downgrade back to anything lower than .235...
however, if you had not tried updating to .242, i would suggest downloading and installing rsd lite, than download and flash
http://www.4shared.com/zip/kQydtP-d/newvrz_xt875_59902xt875verizon.html
using rsd lite, that should fix your problem..
remember, if you have updated to .242 DO NOT FLASH THAT FILE.. WILL BRICK YOUR PHONE.
Thanks for your response. I never actually got to the point where I could flash the file. I "pushed" the update to the SDcard, messed up the CDT file and rebooted to discover it wouldn't flash or boot normally. I actually already have and have tried that particular file. I get the same "failed flashing process" error.
Thanks,
You need to use the reinstall 242 option. If you selected the 242 install option and then used the repair ap fastboot option you essentially just flashed the 242 Cdt.bin. You have no choice but to install 242 or you will stay bricked. I don't even want to know how you got into this situation....
Sent from my Xoom using Tapatalk 2
Thanks for your help guys, SamuriHL's suggestion fixed my poor phone.
Much appreciated!
Awesome! Glad it worked.
Sent from my Xoom using Tapatalk 2
How to "reinstall 242 option".
SamuriHL said:
You need to use the reinstall 242 option. If you selected the 242 install option and then used the repair ap fastboot option you essentially just flashed the 242 Cdt.bin. You have no choice but to install 242 or you will stay bricked. I don't even want to know how you got into this situation....
---------------
Hi SamuriHL, I have the same problem messed up the CDT file and rebooted to discover it wouldn't flash or boot normally. RSD Lite v5.7 failed flashing process 6/22. How do you do the "reinstall 242 option" with 902 / 905? Thanks,
Click to expand...
Click to collapse
You need to be very clear on what you were flashing when it failed. If you flash the wrong Cdt.bin it'll make things worse. What version were you on and what are you trying to go to? The option to repair the Cdt.bin is in my house of Bionic script once you make a selection for what you are trying to install.
Sent from my Xoom using Tapatalk 2
I did it too....
Hey guys.. I just did what the first poster did... I think that I ruined my phone.
I was running .905 rooted, and I downloaded HoB .244 and .246. I tried to install .244 and it sent the .zip to my sd-card, but then it wouldn't finish the install. It told me that I would have to use the stock recovery. I booted into stock recovery, and I tried to install it again. It got all the way to"Installing..." and then gave me an error message that had "targa" in it, and said something about not having the correct location or something. I used the "Repair AP Fastboot error" and now I am stuck at:
AP Fastboot Flash Mode (S) (Boot Failure)
0A.61
Battery Low
Cannot Program
Connect USB
Data Cable
Invalid CG Version (CG: devtree)
That screen comes up when I plug my phone into the wall charger, and when I plug my phone into my PC it is not recognized. furthermore if I plug it into my PC before I plugged it into my wall charger I just get a white LED notification light, and I cannot turn it on.. I just couldn't wait for the OTA ICS update any longer, and now I fear that I have bricked my phone.... Please help me.. anyone...
It's not bricked but you will need to charge the battery and it can't be done in the state your phone is in. So either get an external charger or research "non-standard battery charging methods". Once you do that, I suggest uninstalling the HoB fully, redownloading 7.2, FXZ, RSD 5.7, and 246 and install them in that order. You will have to tell it no to transfer, no to check the md5, no to reboot into AP Fastboot, and then start when it asks if you want to flash with RSD. It WILL NOT work until you put a charged battery in it.
Well I got a little bit closer... I realized that my phone wasn't being detected as plugged into my USB because I had a USB extender... I eft my phone on the charger earlier today, at the fastboot locked screen, and it didn't charge. I ran FixCTD and it tries to work, but then it says (FAILED: Remote Battery Low)...
It WILL NOT CHARGE in that state. You need to externally charge it. Otherwise you're just wasting your time.
SamuriHL said:
It WILL NOT CHARGE in that state. You need to externally charge it. Otherwise you're just wasting your time.
Click to expand...
Click to collapse
Thanks for the helpful suggestions I hope that I can fix my phone soon....
Once you charge the battery, reinstall the HoB as I suggested, and redo the install process, it'll work.
SamuriHL said:
Once you charge the battery, reinstall the HoB as I suggested, and redo the install process, it'll work.
Click to expand...
Click to collapse
I have a friend with a Moto Bionic too, and I am going to use his phone as a surrogate for my battery. I am so happy to hear that I didn't ruin my phone. I feel like I skipped a step in your instructions in the first place, and now I am paying for it lol. :silly:
CinderCloud said:
I have a friend with a Moto Bionic too, and I am going to use his phone as a surrogate for my battery. I am so happy to hear that I didn't ruin my phone. I feel like I skipped a step in your instructions in the first place, and now I am paying for it lol. :silly:
Click to expand...
Click to collapse
Skipping steps is never a good idea.
I re-downloaded everything, and I have a charged battery ready now. So I am supposed to install FXZ, 5.7, and then 246 right in a row now?
HoB 7.2, FXZ, RSD 5.7, and then 246 in that order, yes.
I installed all of them now. FXZ is working it's magic on my phone at this very moment! THANK YOU SOOO MUCH!!!!!
You're welcome. Enjoy!
Hi, my best friend she had a HD phone, one day got stuck into the M logo, the only thing I can do is get into the fastboot, no recovery no nothing.. So i try to reinstall the rom, have download several tools but i cant do anything, after several intents to install roms i hace in AP fastboot flash mode, device is unlocked status code 1fastbookt Reason sticky bit factoy_fastboot. for a 2nd time but i can install roms, I dont know if phone bootloader unlock and cant check... I dont know if phone is usb debugging cause it wont load the system. I dont see any internal files from phone I also try rsd lite, but the same it says that it start doing the process but nothing else happen.. any ideas on how to get a rom install there..
thanks
SAME thing..
Please do help us...No recovery...No debugging...stuck at logo..!!
If you don't have an unlocked bootloader, I don't think you can use Myth or RSD to flash an ICS rom over a JB rom.
Did you load the latest Motorola USB drivers? When you connect the phone, run adb to list the devices. Does your phone appear?
not for me doesnt show any devices... and while trying to do other commands always get stuck ad *daemond started succesfully* but doesnt do anything.. also when trying to use motorola device manager it says it will update and never connect to server and close the app.
if i do fastboot commands like reboot-loader it does work it reboots the phone, but if i try to flash something doesnt it doesnt do anything.. i try using mfastboot also and the same happen.
Is there a way to flash a rom or something so i can fix this phone or it is dead?
On the Fastboot screen, if it says UNLOCKED in capitals next to "Device Status:" , then this problem is easily fixable.
Download RSD Lite from here: http://forum.xda-developers.com/showthread.php?t=2231249
Download Motorola Stock Firmwares:
Stock Jellybean for AT&T: http://sbfdownload.droid-developers...MB886_NII_TA-2-16-release-keys-NII-MX.xml.zip
Stock Jellybean for Bell Canada: http://sbfdownload.droid-developers...FFW-11-4-release-keys-BellMobility-CA.xml.zip
Open up your zip file and replace the .xml with the new XML you will download from this link: https://www.box.com/s/num1eshkf0c2or2h4160 You really can't forget to do this!
Launch RSD, connect device to PC, make sure RSD recognizes it. Navigate to your firmware file, select it, and press the start button. Sit back, relax, and let it do its work. It will take around 5-10 minutes. Do not unplug the cable, and do not attempt if you are in a situation in which you think you may lose power (especially if running from a desktop PC).
If RSD Lite won't work, then this thread will show you how to manually flash your stock firmware: http://forum.xda-developers.com/showpost.php?p=40929335
Basically, you repeat all the instructions I just gave you and then manually input some lines in Command Prompt.
ok i went back to stock attus usind rsd lite everything went ok.. booted up and rooted it. after replacing the xml in mexico retail to flash it through rsd i turned the phone off and done the 3 finger salute... it gave me no fastboot option just went straight to a pic of a android and a exclamation point inside a triangle.. computer wont recognize it when it is like this nor will rsd. so i cant flash anything cant use rsd.. i tried using myth tools but it keeps coming up missing fastboot files please reinstall. and ive tried and tried reinstalling the files with no luck in getting it to work. what should i do??
lesterjustin29 said:
ok i went back to stock attus usind rsd lite everything went ok.. booted up and rooted it. after replacing the xml in mexico retail to flash it through rsd i turned the phone off and done the 3 finger salute... it gave me no fastboot option just went straight to a pic of a android and a exclamation point inside a triangle.. computer wont recognize it when it is like this nor will rsd. so i cant flash anything cant use rsd.. i tried using myth tools but it keeps coming up missing fastboot files please reinstall. and ive tried and tried reinstalling the files with no luck in getting it to work. what should i do??
Click to expand...
Click to collapse
Missing error in myth about fastboot can be solved with 1st in Myth (installing APKTOOL/ADB/FASTBOOT)
devilsking said:
Missing error in myth about fastboot can be solved with 1st in Myth (installing APKTOOL/ADB/FASTBOOT)
Click to expand...
Click to collapse
I tried that and didn't work.. seems like it gets half way through install then disappears
lesterjustin29 said:
I tried that and didn't work.. seems like it gets half way through install then disappears
Click to expand...
Click to collapse
Try to look for installer in Tools folder then run it under administration permission.