Related
Hello,
I just installed the new MIUI.us 4.0.3-2.3.9.
Found in this thread: http://forum.xda-developers.com/showthread.php?t=1479348
Everything work perfectly fine. Except..when I plug my USB, my computer can't find it. Nothing pop-up to say do you want to enable USB transfer or something like that. The connector should not be the problem because the battery is charging.
Any ideas on what could cause the problem?
Thank you in advance.
If you have adb setup, you can see if it's recognized by using the 'devices' command. If it is detected then you just need to enable usb mass storage mode from the rom.
evilkorn said:
If you have adb setup, you can see if it's recognized by using the 'devices' command. If it is detected then you just need to enable usb mass storage mode from the rom.
Click to expand...
Click to collapse
That's the problem I don't know where in the rom I can enable usb mass storage because normally it pop up.
Did you even read the thread? I didn't even click the link until now and saw how to enable it within 5 seconds.
here simple application that will enabled UMS mode for External sdcard
root needed.
how to use:
safe way on version 2.5 is :
enable UMS Mode when cable usb is unplug
Back to Charge mode when cable usb is unplug
safe way on version 3.0 is :
do it on condition usb plugged
note:
if you plug into player or some device player , and you found that it cannot found the USB drive
in this case just do this
settings -> connectivity -> usb connection type
and do press or repress the "Charge Only"
in version 3.0 you will notice 1 triangle on task bar, its normal , it telling you mass storage is currently unmount
2 icon on task bar is telling you the mass storage successful unmount you can take it out
those of notice are normal if we do unmount the mass storage in android api level.
all the information about how to do it i found on XDA forum.
i do some research also code this app
version 2.1
fix sometime fail to mount back to external_sd folder
version 2.5
fix sometime got to bluescreen on windows
version 3.0
fix bluescreen on windows
using different approach to unmount the external SD card
version 3.2
bring back native method to mount and unmount, its speed up abit when using native method
by check the box to enable native mode
version 3.3
support Jelly Bean
thanks are goes to XDA Members
UMS_mode.apk
UMS_MODEv2.1.apk
UMS_Modev2.5.apk
UMS_ModeV3.0.apk
UMS_ModeV3.2.apk
UMS_ModeV3.3.apk
its working good tnx mate
Thanks for app. It is amazing
Best regards,
It does not mount back SDcard to /mnt/sdcard/external_sd after disconnect, so have to reboot after use it.
MTP is working but external_sd is empty.
your welcome guys,
@m0b :
i think you forget click on "back to charge mode"
bullghost said:
your welcome guys,
@m0b :
i think you forget click on "back to charge mode"
Click to expand...
Click to collapse
No, i try it, but it does not help, only reboot.
m0b said:
No, i try it, but it does not help, only reboot.
Click to expand...
Click to collapse
try the version 2.1,
i fix it
bullghost said:
try the version 2.1,
i fix it
Click to expand...
Click to collapse
now ist fine for me, tnx!
m0b said:
It does not mount back SDcard to /mnt/sdcard/external_sd after disconnect, so have to reboot after use it.
Click to expand...
Click to collapse
With the first version I have access to the card. After disconnecting I have to reboot the phone, so I can regain access to the card.
bullghost said:
try the version 2.1, i fix it
Click to expand...
Click to collapse
Version 2.1 gives reproducible blue screens with Win7 x64 SP1 at the first link when I confirm the superuser, or in further tries, when connect the USB cable.
Only uninstalling the apk helps to solve the problem.
A little off topic:
After UMS_mode.apk does not work for me, here is another way to access both memory cards in the P880 (and any other Android-Device) from Windows OS:
Install Total Commander (Shareware): http://www.ghisler.com
Install Total Commander Plugin "Android ADB" (Freeware): http://www.totalcmd.net/plugring/android_adb.html
Android device driver has to be installed too!
Through links, both SD-Cards appear with 3 differen pathes in the P880 operating system.
The external SD-Card has its mount point in (!) the internal SD-card:
Code:
Internal SD-Card:
\\\ADB\LG-P880\data\media\
\\\ADB\LG-P880\mnt\sdcard\
\\\ADB\LG-P880\sdcard\
2. external SD-Card:
\\\ADB\LG-P880\data\media\external_sd\
\\\ADB\LG-P880\mnt\sdcard\external_sd\
\\\ADB\LG-P880\sdcard\external_sd\
Bud Cord said:
A little off topic:
After UMS_mode.apk does not work for me, here is another way to access both memory cards in the P880 (and any other Android-Device) from Windows OS:
Install Total Commander (Shareware): http://www.ghisler.com
Install Total Commander Plugin "Android ADB" (Freeware): http://www.totalcmd.net/plugring/android_adb.html
Android device driver has to be installed too!
Through links, both SD-Cards appear with 3 differen pathes in the P880 operating system.
The external SD-Card has its mount point in (!) the internal SD-card:
Code:
Internal SD-Card:
\\\ADB\LG-P880\data\media\
\\\ADB\LG-P880\mnt\sdcard\
\\\ADB\LG-P880\sdcard\
2. external SD-Card:
\\\ADB\LG-P880\data\media\external_sd\
\\\ADB\LG-P880\mnt\sdcard\external_sd\
\\\ADB\LG-P880\sdcard\external_sd\
Click to expand...
Click to collapse
thanks bro , here version 2.5 will fix the bluescreen
Thanks a lot! useful for syncing with doubleTwist. can't stand the LG PC Suite its too slow.
Sent from my LG-P880 using xda premium
version 3.0 relase fix bluescreen again,
if you suffer on always media scanning you can turn it off on
setting -> application -> find "Media Storage" -> disable
Wow!
This is the greatest thing created for this phone so far.
MTP is painfully slow, doesn't work with cars/stereos/etc, requires installing drivers everywhere I go, crashes all the time, doesn't allow access with a file path, and somehow caused my sd card to wipe itself three times in two weeks, so this was a major issue for me that was making me regret buying the phone.
Initially after installing this app (v3.0), I had to repeatedly toggle UMS/MTP mode and plug/unplug my phone from the computer several times before it finally started working, but now it's perfect.
If you have a paypal or flattr link, and I'll send something your way. Or put it on the Play Store so I can buy it and update
Thanks!
thanks
ben! said:
This is the greatest thing created for this phone so far.
MTP is painfully slow, doesn't work with cars/stereos/etc, requires installing drivers everywhere I go, crashes all the time, doesn't allow access with a file path, and somehow caused my sd card to wipe itself three times in two weeks, so this was a major issue for me that was making me regret buying the phone.
Initially after installing this app (v3.0), I had to repeatedly toggle UMS/MTP mode and plug/unplug my phone from the computer several times before it finally started working, but now it's perfect.
If you have a paypal or flattr link, and I'll send something your way. Or put it on the Play Store so I can buy it and update
Thanks!
Click to expand...
Click to collapse
thank you , as far as you like it , is enough for me
ben! said:
This is the greatest thing created for this phone so far.
Click to expand...
Click to collapse
I can not confirm unfortunately.
I wanted to give the app still a second chance and have installed 3.0.
Then I restarted the phone, without starting the APP before.
Now it hangs on startup LG boot logo.
Even without the second SD card the same problem.
Any idea without factory reset or flashing KDZ?
My phone is still stuck in boot, but I have an access via adb shell to system.
Unfortunately I have no permission to access "/data"
Could anyone tell me the aplication name of this UMS-Tool under "/data/data" ?
I only found "com.noshufou.android.su" in classes.dex, but don't know wether this is right:
Code:
[email protected]:/data $ run-as com.noshufou.android.su
run-as com.noshufou.android.su
run-as: Package 'com.noshufou.android.su' is unknown
[email protected]:/data $
Ok, I guess it's not quite working perfectly for me now that I've used it a bit more, but I still love it.
1) it's really tricky to get it working initially. I almost always have to toggle it multiple times and sometimes reconnect the usb cable.
2) like someone else mentioned, it never remounts the SD card so I have to restart the phone to get it working again after I'm done.
I have not had any problems on boot like BudCord.
I'm running stock firmware 10f.
Anyone have v3 hosted any where else? I can't download from media fire.. no captcha support..
Tried stock browser, dolphin, and chrome..
Any chance to get it working on mac os x (10.6.8) ?
For the moment it is the only default i found with this phone : the lack of "connections" with Apple's OS :/
PS : I searched on the web and I found a solution for Mac OS X users : Android File Transfer (on the official website).
Sorry I can not the url because I am new on this forum.
Hi,
So, I went and bought the Razr I phone, despite the language question was hard to me.
But anyway, now I have other hard issue: How to transfer files between the phone and a WinXp computer, when there is no "Mass storage" option in USB computer connection on the phone.
The "Media device (MTP)" mode seems not to work with XP, but "Camera (PTP)" works. But I can see only DCIM and Pictures folders from the computer.
I'm not sure, where they are even located: on the phones internal memory or on the memory card (there is 8gb micro-sd).
An interesting feature was, that when the phone was connected to Win7 pc in camera-mode, I could see the both memory spaces and all the folders.
Why can't I see the folders on XP? The phone is with the stock ROM (81.5.39001.XT890.Retail.en.GB / Android 4.0.4).
And why there is not "Mass storage"-option despite my old Defy with CM9 and the same Android 4.0.4 version had the option.
Edit. Solution - see post #8
For a long time I didn't use XP but I assume You need to install whole driver pack to see MTP on XP. I suggest to look for mod to enable Mass Storage Mode on Razr I. I saw this mod somewhere here but completely don't remember haw it was named.
I could find only one driver package from Motorola: Motorola Device Manager 2.4.5
But that didn't help. After connecting the phone with USB-cable, my pc recognizes the phone, but then requires a MTP driver.
Weird that no driver-CD did not come with the phone original package.
Chamelleon said:
... I suggest to look for mod to enable Mass Storage Mode on Razr I. I saw this mod somewhere here but completely don't remember haw it was named.
Click to expand...
Click to collapse
i use the "USB Mass Storage Enabler (for Samsung and Sony devices)" from Mohammad Abu-Garbeyyeh.
Dont remember if you need to be rooted but its the only tool i have found thats working for Ri...
5m00v3 said:
i use the "USB Mass Storage Enabler (for Samsung and Sony devices)" from Mohammad Abu-Garbeyyeh.
Dont remember if you need to be rooted but its the only tool i have found thats working for Ri...
Click to expand...
Click to collapse
It is this one http://forum.xda-developers.com/showthread.php?t=2297888. Works really good.
But if you are on 4.0.4 You can find on this forum mod of the framework with USB mass storage enabled.
But you have to be rooted.
Yes, the phone is on stock 4.0.4 version as I have owned it just few days.
The phone suggested an update (91.2.29001.en.GB), but I didn't update. I was happy with CM9 4.0.4 version in my Defy, and same version seems to run smoothly on Razr I too. And by the update, I would possibly loose the FM radio function.
Hopefully the mod on this forum is easily described, I'm a low-level rookie with customizing Android. However is was delightful to install CM9 to my Defy with good instructions on this forum.
PatrikRa said:
Yes, the phone is on stock 4.0.4 version as I have owned it just few days.
The phone suggested an update (91.2.29001.en.GB), but I didn't update. I was happy with CM9 4.0.4 version in my Defy, and same version seems to run smoothly on Razr I too. And by the update, I would possibly loose the FM radio function.
Hopefully the mod on this forum is easily described, I'm a low-level rookie with customizing Android. However is was delightful to install CM9 to my Defy with good instructions on this forum.
Click to expand...
Click to collapse
You can try this one method http://forum.xda-developers.com/showthread.php?t=2005541
or this one http://forum.xda-developers.com/showthread.php?t=2040933
Make a back up at first.
I've just found, that there are some MTP drivers for WinXP:
Media Transfer Protocol Porting Kit and then Windows Media Player 11 (which includes the driver)
Lets see if one of them work first. Otherwise I have to say goodbye to the phones warranty.
Edit. Case solved. I installed Media Player 11 and then selected Motorola USB Composite Device driver in WinXP device manager for the phone.
Now it works, despite not so simply as USB mass storage option did. I'll spare the warranty so far if something comes ahead.
Thanks for help.
Don't worry about warranty. In this days You can root without bootloader unlock and use http://forum.xda-developers.com/showthread.php?t=2297888. Yesterday I tried to download 7GB of movies from my RAZRi card by MTP and when I saw transfer speed around 1MB/s exactly the same as on WiFi I searched some and this is easiest working way for USB Mass Storage.
Hi everybody !
I have a Sony Xperia SP- C5303 - Rooted,TA saved,BL unlocked :good:
Rom custom : CM11/FXP308 :good:
My problem : I can't connect my phone in MSC mod, so I can't see my SDcard , to put files on it.
I have only the choice into MTP mode or PTP mode. (go on the tab, "USB connection at computer" in the right corner, under"Stockage" when you select "Parameters".) [Parameters>Stockage>USB connection (tab in right corner)]
So, I unticked the MTP mode and PTP mode.
I connect my phone at my computer, and i see a problem in the devices manager,my phone C5303 has a little yellow triangle on it; he isn't recognized.[/B ] --->error in .jpg --->link : ht tp://hpics.li/acab5e2
Under others modes (MTP,PTP), the phone works perfectly and he is recognized no problems. Even, in fatsboot mode and also in flashmode mode.
What can i do ?
I'm on Windows 8.1 pro X64.
Thanks
Sky:fingers-crossed:
up !
nobody knows ?
up ! (sorry for the date of thread)
I'm on CM11 official ; it's still the same thing...
Nobody knows the solution to see the sd card like a mass storage and make disapear this little yellow triangle ?
mrskyou said:
up ! (sorry for the date of thread)
I'm on CM11 official ; it's still the same thing...
Nobody knows the solution to see the sd card like a mass storage and make disapear this little yellow triangle ?
Click to expand...
Click to collapse
Wow your question was unanswered for a very long time!
I suggest for you to tick "MTP" in your device settings. As in OP, you have unticked both, which possibly makes your Windows unable to "know" the protocol in order to interact with your device.
MTP is Media Transfer Protocol, known to be widely used in Windows in order to connect media devices.
TechnoSparks said:
Wow your question was unanswered for a very long time!
I suggest for you to tick "MTP" in your device settings. As in OP, you have unticked both, which possibly makes your Windows unable to "know" the protocol in order to interact with your device.
MTP is Media Transfer Protocol, known to be widely used in Windows in order to connect media devices.
Click to expand...
Click to collapse
In MTP, There is no problem;the phone is recognized.
I wondered if it was possible, to put the phone on MSC...to use it like a mass storage.
mrskyou said:
In MTP, There is no problem;the phone is recognized.
I wondered if it was possible, to put the phone on MSC...to use it like a mass storage.
Click to expand...
Click to collapse
It was impossible (natively, maybe?)
I also prefer to use it mass storage too. Being that sometimes connecting XSP to my Linux box, it yields a mounting error, which forces me to logout of my Linux session, and login again. I don't find any solution for now. Maybe this should be requested officially to Cyanogenmod?
TechnoSparks said:
It was impossible (natively, maybe?)
I also prefer to use it mass storage too. Being that sometimes connecting XSP to my Linux box, it yields a mounting error, which forces me to logout of my Linux session, and login again. I don't find any solution for now. Maybe this should be requested officially to Cyanogenmod?
Click to expand...
Click to collapse
Maybe ... I Hope so !
I still did'nt find the solution but
-there is an alternative : this app .
mrskyou said:
Maybe ... I Hope so !
I still did'nt find the solution but
-there is an alternative : this app .
Click to expand...
Click to collapse
Thank you but maybe I will be sticking with my good old sdcard adapter for now. Thank you! And gosh that post was from October last year, dude!
TechnoSparks said:
Thank you but maybe I will be sticking with my good old sdcard adapter for now. Thank you! And gosh that post was from October last year, dude!
Click to expand...
Click to collapse
Yep, me i use the "mtp" mod ans its work nice. I have an sdcard adaptor too.
But this app can be useful too . Ex: to show a movie on the sd card from an external player (PlayStation for exemple).
Yeah this post is a bit old ^^
Did you try enabling/disabling Android debugging on your phone? Sometimes, my Xperia SP does not show up in My Computer when Android debugging is on.
mrskyou said:
Yep, me i use the "mtp" mod ans its work nice. I have an sdcard adaptor too.
But this app can be useful too . Ex: to show a movie on the sd card from an external player (PlayStation for exemple).
Yeah this post is a bit old ^^
Click to expand...
Click to collapse
Oo I see. Don't worry, I will use the app when I find the situation suits :fingers-crossed:
daubh said:
Did you try enabling/disabling Android debugging on your phone? Sometimes, my Xperia SP does not show up in My Computer when Android debugging is on.
Click to expand...
Click to collapse
Enabling or disabling Android debugging is way out of scope of this thread.
Lately my PC refuses to detect any USB connection when I connect phone via USB cable. It charges and if I enable USB debugging I get a notification for that too but the USB utilities thing won't pop up that lets you choose the mode of connection(Mass storage etc.)
I have installed/reinstalled drivers over and over. Eventually it was working but now it won't even work once.
I need help!
Mounting from recovery does nothing either
On custom ROM (RRemix )
EDIT: Let windows update pick the drivers and now can connect as MTP device BUT still no USB utilities (Rom is cm11 based) so i don't really know what else to do :/
Storage and then menu..
USB computer connection.
nokiamodeln91 said:
Storage and then menu..
USB computer connection.
Click to expand...
Click to collapse
Can you elaborate? I don't understand your answer
Anything I flash seems to aggravate the issue. Working fine for now after I installed kies but I am scared to flash anything else.
I dont know what the problem is/was. Can someone please help?
go to settings.. then storage. press menu and choose USB... you will get the menu to move from MTP to MS
nokiamodeln91 said:
go to settings.. then storage. press menu and choose USB... you will get the menu to move from MTP to MS
Click to expand...
Click to collapse
Thanks will try that!