Related
I've tried to download the ROM, but HTC tell me this "Sorry, this software download is not suitable for your device".
Maybe my device s/n number is not correct.
Maybe someone who has the correct s/n could download this ROM~
Just tell you guys the news~
http://www.htc.com/europe/SupportDownload.aspx?p_id=174&cat=2&dl_id=537
Caxio's and frednd's DownLoad Link--(I wanna say THANK YOU VERY MUCH!)
See page3 #21 & #23
Filename is :
HTC Touch 3G_MR2009_RUU_Jade_HTC_Europe_2.32.401.2_Radio_Sign_12.41.30.16_0.41.30.12_Ship
edit:
on booting the last red line (after radio and protocol) now says :
D 2.32.44800
Date (which shows after first boot) after screen calibration is now set to 25/03/09
(in settings / about) Build : 5.2.20771 (20771.1.4.6)
(in settings / device info) : rom version 2.32.401.2(44800)
ON customization after first boot if scaned for wifi networks and poped up a message about available networks
Ht845kh14923 :d
o2p63 said:
Ht845kh14923 :d
Click to expand...
Click to collapse
This is for italian version.
Downloading this know !!!
Will i be able to flash it to my device now i have used HardSPL ??
Downloading this know !!!
Will i be able to flash it to my device now i have used HardSPL ??
It seems HardSPL 1.40oli and this 2.32 rom don't work very well.Very sluggish and phone can't turn ON even after 2 Hard resets.
What is your experience???
Do not install if hard spl
I installed the ROM upgrade from HTC, it ****ed up my device real bad: phone module not working, device boot up in aprox 1 min, after 3 mins Touch Flo not started, it restarts by itself.
I did hard reset and nothing happens.
I,m reinstalling jademan superrom!
I hope that works!
Could anyone check, if the gps-support has been improved?
km
lexx2009 said:
I installed the ROM upgrade from HTC, it ****ed up my device real bad: phone module not working, device boot up in aprox 1 min, after 3 mins Touch Flo not started, it restarts by itself.
I did hard reset and nothing happens.
I,m reinstalling jademan superrom!
I hope that works!
Click to expand...
Click to collapse
Exactly same symptoms. I went to Stock SPL 1.40 and reflashing the new rom now. Hope it works better
update : Jade is fine now. New SPL is 2.32.0000 . More testing to be done.
Question : Can HardSPL 1.40.oli be flashed over new 2.32.0000 ?
lagoskon said:
Exactly same symptoms. I went to Stock SPL 1.40 and reflashing the new rom now. Hope it works better
Question : Can HardSPL 1.40.oli be flashed over new 2.32.0000 ?
Click to expand...
Click to collapse
How did you go back to Stock SPL 1.40 ?? Where can i find this ??
Myster said:
How did you go back to Stock SPL 1.40 ?? Where can i find this ??
Click to expand...
Click to collapse
This is on the Hard-SPL page along with the Oli version
http://forum.xda-developers.com/attachment.php?attachmentid=166262&d=1236988725
GPS seems to work fine now, also the scroll behavior of opera is better
km
It is annoying that hardspl doesnt work with this upgrade of jade.. can't built a rom now with the new oem. It's all newer than the iolite versions, but still doesnt include Footprint
Any changes in Manila? New tabs? Calendar? Stocks? Changes in the contacts?
Hi
What is the Radio version in this new ROM?
I have just applied the version from here and if this contains the old Radio then I can hold off for now until hopefully a compliant Hard-SPL is made, I can live without Opera being perfect.
Hi all,
I'm a new owner of a Jade since april 11. I'm french so excuse me for my english ^^'
I installed this new rom, and i get exactly the same problems as Lexx2009 and Lagoskon. I tryed to install the stock 1.40 rom but it doesnt work. I can synchronize the phone but i cannot use customRUU or hard spl anymore, it says the Jade isn't plugged with the usb cable ..
Please can anyone tell me what i have to do to get a rom whith works please
nereus114 said:
Hi all,
I'm a new owner of a Jade since april 11. I'm french so excuse me for my english ^^'
I installed this new rom, and i get exactly the same problems as Lexx2009 and Lagoskon. I tryed to install the stock 1.40 rom but it doesnt work. I can synchronize the phone but i cannot use customRUU or hard spl anymore, it says the Jade isn't plugged with the usb cable ..
Please can anyone tell me what i have to do to get a rom whith works please
Click to expand...
Click to collapse
Install a different rom from this forum-> Shut down your jade, unplug it. Hold down "volume down button" and ""power on button" to get in to boot mode. now start to flash another rom.
when finished you can install stock spl and then install this new rom
Stupid (or not so stupid) question,
If we flash original SPL to instal this ROM, and SPL is upgraded by this ROM to 2.32,.... and HardSPL does not work with this new 2.23 SPL,.....
THEN, IT SEEMS THAT FOLLOWING THESE STEPS WILL ONLY MAKE US SLAVES OF THIS NEW & OFFICIAL HTC ROM!!!! i.e. No possibility of other ROMs flashing until new HardSPL is developed,...
Please, somebody to confirm this statement?
Thanks,
Jarel
jarel said:
Stupid (or not so stupid) question,
If we flash original SPL to instal this ROM, and SPL is upgraded by this ROM to 2.32,.... and HardSPL does not work with this new 2.23 SPL,.....
THEN, IT SEEMS THAT FOLLOWING THESE STEPS WILL ONLY MAKE US SLAVES OF THIS NEW & OFFICIAL HTC ROM!!!! i.e. No possibility of other ROMs flashing until new HardSPL is developed,...
Please, somebody to confirm this statement?
Thanks,
Jarel
Click to expand...
Click to collapse
that's right.. but i think it's in one of the drivers. using the old drivers and the new oem/sys makes it possible to run it with the current hardspl.
radio in this rom 0.41.30.12
no changes in manilla tabs, don't know what changed but it's newer
Hi,
I have just tryed to flash both newest laurentius rom and newes kwbr rom
Flashing goes ok, but when all files are loaded, phone just resets and starts all over again.
im on spl-1.56 Olinex
Help needed
Whenever you flash a new rom your phone will automatically reboot and start up again. The phone will need to be setup again with date/time etc but connections etc should automatically setup itself.
This is similar to a hard reset as everything has been wiped from phone apart from OS and whatever you had stored on SD Card
Once setup go to Settings > System and it should state which rom you have installed
Yes but it starts up again with setting time date and so on.
When finished loading files, it starts over as you says, but then rom starts loading again. its like it hard resets all the time instead of just resetting..
I flash. allign screen - set time date and so on - files load - phone restarts
And then i shall allign screen - set time and date - load files - phone restarts
and on and on and on
Megawhopp said:
I flash. allign screen - set time date and so on - files load - phone restarts
And then i shall allign screen - set time and date - load files - phone restarts
and on and on and on
Click to expand...
Click to collapse
Ah, right. Apologies. Now I understand your problem better.
Had you ever successfully flashed a rom? Or has thius always happened with a cooked rom?
Megawhopp said:
Hi,
I have just tryed to flash both newest laurentius rom and newes kwbr rom
Flashing goes ok, but when all files are loaded, phone just resets and starts all over again.
im on spl-1.56 Olinex
Help needed
Click to expand...
Click to collapse
You can better ask it in L26 ROM topic, but I know that Laurentius ROM (2.3 or 2.4) KEEPS hardresseting automatically due to bugs in his cooked rom. After 2 or 3 times automatic HR it stops....
Yes i have successfully flashed roms, i came from kwbr 2.1
i have tryed with more roms than laurentis´ also with kwbr 2.3 and 2,3,1
Megawhopp said:
Yes i have successfully flashed roms, i came from kwbr 2.1
i have tryed with more roms than laurentis´ also with kwbr 2.3 and 2,3,1
Click to expand...
Click to collapse
Ok, sounds like a hardware problem to me. I've had only automatic Hard Resets with L26's Rom. No problems with Kwbr or Dutty's roms.
Try flashing via USPL and tell us how it goes.
had same problem with l26 rom will never use laurentius rom's again, dutty's and miri's roms are the best
I have tryed with USPL and its the same
Now i cant do anything from my computer. How is it that i flash from sd card?
Credits to JohnQ
"take a look at your SD card. direct folder storage card/sdconfig.txt. delete the inside code. im sure there is a code which means hardreset after flash/hardreset. i dont know what it means but i just delete it. but it still hardreset again. so let it hardreset again. then it will be ok until you hardreset your self. lol."
I did it and it worked as a charm. Have you flashed you device with the memory card inserte into it?
no i didnt flash with memory card in it, and memorycard is not in it now
i just managed to flash danish ship rom, but cant seem to flash stock uspl
i will see if phone starts up wit danish ship rom
It worked.. My phone is now alive with danish ship rom..
I will now try to flash newest from Miri..
Megawhopp said:
no i didnt flash with memory card in it, and memorycard is not in it now
i just managed to flash danish ship rom, but cant seem to flash stock uspl
i will see if phone starts up wit danish ship rom
Click to expand...
Click to collapse
Anyway, take a look into you SD Card through you PC...is there a folder named "sdconfig.txt"?...if so, take a look into this "sdconfig.txt" and, please, tell what is written into it...
nope, is no such file
Cant flash miris. Just stays at 0 %
managed to get phone back to hard spl thanks to crackwhores fantastic guide.
And at the moment im flashing miris newest rom..
Hope it works
Megawhopp said:
nope, is no such file
Click to expand...
Click to collapse
But what matters is that you have your baby back
Greetings.
Nope, its not..
Miris didnt work either, and despite the fact that im on hard spl phone is now with the blurry green screen.
Im beginning to get lost now..
What to do..
Please help
Hi all,
Silly me, dont know what happen. It used to be dopod c800 with WM5. Updated the rom to WM6 and become P4350.After a while, very eager to put WM6.1 but i flashed with Elfin's Toch Flo ROM. I also not sure whether i have hardspl it or not. Check into bootloader my IPL 4.17.0001 and SPL 4.17.0000.
Now i am stuck, as it cannot turn onto hardspl (if not yet) cannot turn on to remove hardspl (if alredy spl). Already try RUU many roms but failed. Pls help me.
Well if you managed to actually flash an Elfin ROM, your device is most definately bricked completely. Thats a ROM for a completely different device that is 100% not compatible with the Herald.
ashasaur said:
Well if you managed to actually flash an Elfin ROM, your device is most definately bricked completely. Thats a ROM for a completely different device that is 100% not compatible with the Herald.
Click to expand...
Click to collapse
really? i've try to flash original dopod C800 RUU via SD card (rename .nbh to heraimg.nbh) but update fail. Also try to make a gold card using other mobile http://forum.xda-developers.com/showthread.php?t=417930 but stuck when other mobile security's locked. try to unlock security using Device Security Manager PowerToy for Windows Mobile 5.0 but that craps cannot detect the phone.
What to do now? throw it away?
lucky me!
Manage to power up and then LIVE as usual.
Nope! they not bricked completely!
well tell us how u did it.....
what i did: (tq to poppamops)
1. Find working HTC
2. 512mb SD card
3. QMAT software (google and install it)
4. Insert ypur sd in working HTC then run QMAT. You should see "create goldcard" in one of the tab.
5. After that, flash it to your "dead" htc via storage card. That's all. TQ
X1 problem to hardSPL for newer SPL version 0.78.0000
Hi, I am ALi , sorry to bother, but just done some HardSPL on my X1,
last time the SPL ver was 0.78.0000
i read many of method to flash a newer ROM must HardSPL first their X1,
the problem is, I had already HardSPL it to SPL ver 0.72.0000, the process was a success
but
it stucked/bricked at tri-color mod, so i had it settled from
forum. xda-developers. com/showthread. php?t=455553 thread reported by MALIK,
i noticed that before down grading my X1, the ROM ver was UK_GEN_R3AA010,
but
after HardSPL to ver 0.72, i cant flash the original ROM UK_GEN_R3AA010 back, instead of that only ROM UK_GEN_R1AA017 are working with my current flashed SPL ver 0.72.
I tried to Hard SPL to 0.52 Olinex version (i didnt find any 0.72Olinex!! just 0.52 Olinex, where can i found the 0.72 ver of olinex?? does the 0.72Olinex really exist?? i am so much confiused now and really tired of trying to make it work in almost a week!!) so many time but fail, by USB, by SDcard (also try to replace my SD-HC4gb to Nokia SD 256Mb) neither of that method work!!
please help...
i am desprate to implement newer ROM on my X1 so called Kovsky....
please admin/engineers/developers help.... my head are getting bolder than b4 huhuhuuuuuu........
-ALi
Terengganu, Malaysia
p/s: i am uploading some of my pic shot while the problem persist right now to photobucket, but i am affraid that i didnt have any permission to attach th pic since i was a newbee....
The hardSPL 0.72Olinex can be found here (X1_HardSPL_v1.zip):
http://forum.xda-developers.com/showthread.php?t=431218
Also there is a detailed describtion on how to hardSPL your device:
http://forum.xda-developers.com/showthread.php?t=431218
For questions you can try the search button here, if you can't find any on this subject (which I doubt, because the question has been asked more than once in the thread) reply to the thread:
http://forum.xda-developers.com/showthread.php?t=431218
I've flashed my X1 with hardSPL and back to stock SPL a number of times, never without succes. From 0.720000 to 0.72Olinex to 0.720000 and from 0.780000 to 0.72Olinex.
So when you can't hardSPL from your pc there must be something wrong with the connection between pc and X1.
If you want a newer ROM with stock SPL, connect your phone with stock SPL 0.720000 to SEUS and SEUS will automatically update SPL to 0.780000. After that you can flash R3A ROM.
The other way through hardSPL and the manual download of R3A from PavelX1's sticky.
I tried restore my software using SEUS but it says that I already have the lastes software (but I have ENERGY ROM 6.5)
the past version of SEUS had an option to flash again but the new one doesnt have.
CAN someone help ???
motok said:
I tried restore my software using SEUS but it says that I already have the lastes software (but I have ENERGY ROM 6.5)
the past version of SEUS had an option to flash again but the new one doesnt have.
CAN someone help ???
Click to expand...
Click to collapse
Download you stock ROM from PavelX1's sticky thread and flash it...
Tnx you saved me from hours of searching
Hi Lokhato,....
thankx for the advice,... if ou wont tell me about the SEUS, sure my X1 i declared it DEAD!!! I was accidently HardSPL it to 0.72.0000 i think...., because of i tried so many times to HardSPL the OLinexSPL to my X1 but it aint workin. but then when i replace the RUU_signed.nbh that got version 0.72.0000stockSPL it worked AND THEN it STUCKED at the boot screen says that please wait, continue to upgrade ROM.... damn i resolved it...
so my step on recover to the latest stock SPL 0.78.00 are like this,...
1. download the SEUS from XPERIA website.
2. try to READ and FOLLOW the instruction stepbystep. even whenever the application ask you to restart the PC/LAPTOP, please make it done so....
3. whenever SEUS asked u to enter the bootscreen, MAKE SURE you take out the SD out from your phone. and let the SEUS flash the OriSPLver 0.78.0000
4. then it blinks several times after the progress bar finished, and it also stucked at bootscreen saying to continue updating ROM.
5. in this situation, please flash back your ROM with ROM UK_GEN_R3AA010 not the R1 or R2 ROM. so to manually flash the R3 ROM, copy the R3 image file to your freshed format SD and named it kovsimg.nbh
6. so put the SD in X1 and soft reset the X1 by pressing the reset button with your stylus at the back panel of X1.
7. let it load the image whenever it enter the boot screen again
8. press the power button to confirm upgrade ROM.
9. it should state there SUCCESS!! and you must HARD-RESET the X1.
9. waitt...... and wait...... be very patient, take a break... let it run.....
10. you are DONE!!
enjoy your original flashed ROM,...
if you not like it,
from this point you can just simply HardSPL it to 0.72Olinex by downloading the X1_HardSPL_v1.zip
then go get another ROM and repeat step 5.
as my observation...
SPL 0.72.0000 can flash img from R1,
R2 I dunno can flash or not, never try it...
SPL 0.78.0000 can flash img from R3
HardSPL it to OLinex ver 0.72OLinex ver, then you r good to go to flash any ROM you like!!
damn what a hard week!!! at last i got it to flash the HardSPL on my X1
last but not least.... just want you all to know that i was doing those step above from my mom's laptop current spec was CentrinoDuo, mine that always hanging whenever try to flash any SPL was on SempronAMD Laptop + always BlueScreen error even after i freshed repair my .NetFramework ver3.5sp1. so if you facing any problem on SPL our X1, try to done the upgrading on another PC/laptop, i believe that Intel based processor was more stable than AMD i think...
Don't know if you can use the SD-card flash method when on stock SPL.
A couple of things to know:
0.720000 is stock SPL
0.780000 is an updated stock SPL
0.72Olinex is hardSPL
Did you try to flash with CustomRUU instead of sdcard? I attached it to this post, just unpack and place the ROM you want to flash in the same folder. You can find the ROMs in PavelX1's sticky.
What does your bootloader say now? And you can't boot your phone?
Lokatho said:
Don't know if you can use the SD-card flash method when on stock SPL.
A couple of things to know:
0.720000 is stock SPL
0.780000 is an updated stock SPL
0.72Olinex is hardSPL
Did you try to flash with CustomRUU instead of sdcard? I attached it to this post, just unpack and place the ROM you want to flash in the same folder. You can find the ROMs in PavelX1's sticky.
What does your bootloader say now? And you can't boot your phone?
Click to expand...
Click to collapse
but
- last time my original 0.78.0000 cant do HardSPL
- after accidently flash the 0.72.0000 by using RUU but at the same time i copy the stock0.72 SPL to RUU folder,,,... or my mistaken to copy to SD also by renaming it to kovsimg.nbh i think, just cant remember at that time, and still cant HardSPL + hangging somemore....
- after SEUS updates to newer stock SPL 0.78.0000 like before it was very easy to HardSPL with 0.72OLinex..... wonder y.....
hmmm... CustomRUU??... i think if i try that method would always get the ERROR code rather then success huhuhuuu....
for now i just stick to flashing ROM using Nokia SD 256Mb if the img can fit it in....
thank you so much anyway bro...
u da man!!!!
Lokatho said:
Don't know if you can use the SD-card flash
What does your bootloader say now? And you can't boot your phone?
Click to expand...
Click to collapse
sorry i miss out to answer this...
my bootloader shows SPL-0.72 Olinex
already flash some of software img like firestorm... nrg... but still cant suit me, now just flash back to it original state WM6.1.....
you got any suggestion about the best,smooth,cool&light ROM for me??
another thing i noticed that, the ROM that been cooked doesnt seems have Xpanel.cab installed, so that our X button panel will be useless, or did i miss something? huhuhuuuu
-ALi
Several roms do have panel manager installed so there is a use for the X Button
in case it is not cooked in you can add it manually. Also XMapper is available for alternative uses of the button...
Finally, if Silent_UC is supported by the rom you can bulk install many apps, registry edits, etc. after flashing the rom or afterwards. Just search...
putrabiru said:
sorry i miss out to answer this...
my bootloader shows SPL-0.72 Olinex
already flash some of software img like firestorm... nrg... but still cant suit me, now just flash back to it original state WM6.1.....
you got any suggestion about the best,smooth,cool&light ROM for me??
another thing i noticed that, the ROM that been cooked doesnt seems have Xpanel.cab installed, so that our X button panel will be useless, or did i miss something? huhuhuuuu
-ALi
Click to expand...
Click to collapse
hardSPL can be done without a problem from 0.780000. I did it several times after I brought it to repairs.
In post #5 in the EnergyROM thread you can find a link on how to install the panelmanager, from R3A and X2. This works with all roms which don't have the panelmanager installed.
Mod. edit: not dev related, moved to general
I am very happy now! Just managed to update my SE X1 after SEUS 0.78!. As others suggested downloaded R3AA010 (APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010), but used NBHUtil to extract ROM. That was a mistake! I simply renamed R3AA010 to Kovsimg and put it in my SD 2 Gb card. Ufff, after 2 weeks of endless reading the forums and thying this and that... Finally!!!!
kinda newbie here in terms of custom ROMs or flashing but could somebody give me a step by step procedure for me to be able to upgrade my xperia x1 6.1 to 6.5? just don't want to brick my phone.
i know that there are lots of tutorial here but i can't find which is the best & stable.
every one is quite stable, if you charge your phone 100% and don't plug your cable out of the phone nothing will go wrong.
After hardspl use SD-Methode to put your 6.5 rom on your phone it's the simpliest way, there you cannot damage your phone with putting a x1 rom on your x1 (with roms from other phones it could damage your phone but i am not sure)
1-unlock yr phone with spl 0.78
2-connect phone with full charge(20% is enough)
note: DON'T use task 29 if u don't flash yr device everyday!
3-try romes to find yr best choice
there is nothing in a simple regular flashing to brick the device
thanks for the replies, im trying to consider this ROM but when i read the thread i found that there are some bugs.
is it possible to revert to 6.1 if you're not satisfied with 6.5? could a simple hard reset do the job?
Wakatsik said:
thanks for the replies, im trying to consider this ROM but when i read the thread i found that there are some bugs.
is it possible to revert to 6.1 if you're not satisfied with 6.5? could a simple hard reset do the job?
Click to expand...
Click to collapse
it's good rom but I suggest this one....It's stable & up to date.don't use htc rom just download GTX 2.2.0 & enjoy!
about the question.no the rom is not a program,It's the os of device.like your pc.it's like that you install windows 7 instead of XP so if you Decide to go back to XP you neet to install it.
if you want to go back to WM 6.1 you need to flash the stock rom again(that is simple).but I think you'll never go back to 6.1
the link for rom I proposed
Dynamics 2.2.0
manishabanzadeh said:
it's good rom but I suggest this one....It's stable & up to date.don't use htc rom just download GTX 2.2.0 & enjoy!
about the question.no the rom is not a program,It's the os of device.like your pc.it's like that you install windows 7 instead of XP so if you Decide to go back to XP you neet to install it.
if you want to go back to WM 6.1 you need to flash the stock rom again(that is simple).but I think you'll never go back to 6.1
Click to expand...
Click to collapse
thanks, will try that & give you feedback
another set of questions....
these are the instructions in flashing x1 to 6.5 but don't understand most of it, sorry for the stupidity =)
-----------------------------------------------------------------------------
Installing:
0) Make a system backup!
Useful apps: SPB Backup, PPC Pim Backup, Sprite Backup
1) Install Hard-SPL 0.78 by OliNex!
2) Put needed cabs to \Storage Card\autocfg\.
Supported formats: *.cab, *.provxml, *.reg, *.rgu.
*.CAB: by default they will be installed to internal memory. Cabs with "_ui" in their names will have an opportunity to be
installed to storage card.
*.EXE: AlphaUC can install *.EXEs from \Storage Card\autocfg\exe\. If you add "_nowait" to filename, customizer won't wait
until it finishes
3) Use task29. !!! Put kovsimg.nbh to storage card !!!
Link: http://forum.xda-developers.com/showthread.php?t=649230
4) Then flash needed ROM as always (via storage card or via CustomRUU). Make a Hard-Reset.
5) Wait for the end of customization. You will see message about it on the second launch.
After that make a soft-reset.
-----------------------------------------------------------------------------
help, the link for task29 is missing, how can i continue?
for number 4, how will i do that?
android froyo 2.2 for xperia x1
hello, guys i'm kinda newbie. how do i get the android froyo 2.2 for my xperia x1. pls help. thanks