Help with soft brick! - XPERIA X8 Q&A, Help & Troubleshooting

I was installing gingerdx rom on my x8 and it got stuck on the SE logo.
I can't go on recovery mode and I try repairing trough pc companion and seus and it says that there is no available update for my phone.
please help!

You know how to go in both recoveries xrec(back button) and cwm(touch the screen) are you?!
if you still cant Here is your answer :
check this thread! http://forum.xda-developers.com/showthread.php?t=1508902
in general, you can flash with a flashtool
i hope i helped!

arikos said:
Here is your answer
check this thread! http://forum.xda-developers.com/showthread.php?t=1508902
in general, you can flash with a flashtool
i hope i helped!
Click to expand...
Click to collapse
I will give it a try
Thanks!

no prob. btw the last post in the thread i gave above is very useful

Try using. Flashtool. it always. Work
Sent from my E15a using xda premium

try to using Flahtool dude!:laugh:
downgrade your phone with x8 generic baseband..and you will got your ohine in 2.1
then root your phone, unlock BL, flash Kernel and ROM
don' forget to wipe data/ factory reset and wipe battery stats..
hit thanks for me dude!

Related

HELP X8 Stuck on sony ericsson SEUS can't use

I am really sorry about many this kinds of post
I can't open my X8
It stuck of as long as I open my phone I really need your help
I have used SEUE PCC flashtool !!!
ALL are no use
SEUE said it is the newest ,no need to update
PCC said no software for you = =
I am really need YOUR HEPL
Flash stock rom,stock kernel manually.
Sent from my X8 using xda premium
try with this http://forum.xda-developers.com/showthread.php?p=12442257#post12442257
ocean1998 said:
I am really sorry about many this kinds of post
I can't open my X8
It stuck of as long as I open my phone I really need your help
I have used SEUE PCC flashtool !!!
ALL are no use
SEUE said it is the newest ,no need to update
PCC said no software for you = =
I am really need YOUR HEPL
Click to expand...
Click to collapse
u used flash tool and it dint help ???? are u sure about it!! does your phone vibrate when u turn it on or not?
Bruno; ryedrt
manishmalhotra said:
u used flash tool and it dint help ???? are u sure about it!! does your phone vibrate when u turn it on or not?
Click to expand...
Click to collapse
yes it vibrate when i turn it on and then it shows sony ericsson and turn a bit grey and stuck as long as i open my X8= =
if you tell us what is cause this soft brick maybe we can tell you more specific what to do! did you try press repair button on PCC?
damir87 said:
if you tell us what is cause this soft brick maybe we can tell you more specific what to do! did you try press repair button on PCC?
Click to expand...
Click to collapse
It said that no software of my device (X8) on PCC when i press repair button on PCC and can't repair by PCC
how to do with my x8
damir87 said:
if you tell us what is cause this soft brick maybe we can tell you more specific what to do! did you try press repair button on PCC?
Click to expand...
Click to collapse
It said that no software for my device (X8) on PCC when i press repair button on PCC and can't repair by PCC
there is no software available for your phone please try again later
ocean1998 said:
It said that no software for my device (X8) on PCC when i press repair button on PCC and can't repair by PCC
Click to expand...
Click to collapse
What Damir mean is:
what are you doing b4 its stuck
1.install costum rom?
2.flash zip files via xrecovery/CWM?
3.Just reboot and its suddenly stuck?
zmuhammx said:
What Damir mean is:
what are you doing b4 its stuck
1.install costum rom?
2.flash zip files via xrecovery/CWM?
3.Just reboot and its suddenly stuck?
Click to expand...
Click to collapse
2.flash zip files in xrecovery
from 2.1 up to 2.3.7
ocean1998 said:
2.flash zip files in xrecovery
from 2.1 up to 2.3.7
Click to expand...
Click to collapse
now that explain everything... you are probably flash rom witch is not compatible with stock kernel! if you can access xrecovery flash gingerdx v13, then you will get cwm recovery preinstalled in rom, then from cwm flash latest version of gingerdx! both version you can find here:
GingerDX v13
Latest GingerDX
always soft brick when restoring backup
why do i always have a soft brick issue when i restore my backup.
always stuck on SE logo... i encounter it twice
___________________
ROM- Gingerdx v28b
kernel- Stock
bootloader- locked ( 11w34)
jonathan07 said:
why do i always have a soft brick issue when i restore my backup.
always stuck on SE logo... i encounter it twice
___________________
ROM- Gingerdx v28b
kernel- Stock
bootloader- locked ( 11w34)
Click to expand...
Click to collapse
yeah
if you're backing up from old system and restore in a new system (ROM) you can got brick OR from new system to old system
so after flashing Kernel, you must backup first
factory reset
wipe battery stats , etc
finally flash ROM
then I think you can restore your data..
Flashtool helps when seus or pc companion does not... just select the firmware for your device and flash it. it always work.
Heres the gudie to use flsh tool.. download stock rom. Ftf file and..
http://forum.xda-developers.com/showthread.php?t=1755215
Sent by the walking walkman..
okay!
This is for the last option! if didn't work to repair it using PC companion or SEUS
1. download X8 E15i 2.1.1.C.0.0._un.ftf from file crop and you willl get your phone on 2.1
2. install your flashtool
3. make sure if your baseband is 015 !
4. root your phone by clicking padlock icon in the Flashtool!
5. install xrecovery with flashtool by clicking the cross icon
6. unlock bootloader using s1tool and make sure if your phone type is not 11w29+ !!
7. flash the latest kernel
8. backup
9. factory reset, wipe data, etc
10. Flash ROM
DOne!
BlackRabbit1703 said:
okay!
This is for the last option! if didn't work to repair it using PC companion or SEUS
1. download X8 E15i 2.1.1.C.0.0._un.ftf from file crop and you willl get your phone on 2.1
2. install your flashtool
3. make sure if your baseband is 015 !
4. root your phone by clicking padlock icon in the Flashtool!
5. install xrecovery with flashtool by clicking the cross icon
6. unlock bootloader using s1tool and make sure if your phone type is not 11w29+ !!
7. flash the latest kernel
8. backup
9. factory reset, wipe data, etc
10. Flash ROM
DOne!
Click to expand...
Click to collapse
I've seen this post before from u
Looks like sth universal & God-mod
Is it important how did i send this?
faraz_fireboy said:
I've seen this post before from u
Looks like sth universal & God-mod
Is it important how did i send this?
Click to expand...
Click to collapse
ow really??
hahaha...lolZ
yep yep yep :laugh::laugh::laugh:
Use flashtool...it will work
Sent from my E15i using Tapatalk 2

PrimeHd6

i installed primeHD6 after i did that i can't access xrecovery or clockworkmod when i press back button or volume up stock at sony Ericsson white
love_story99000 said:
i installed primeHD6 after i did that i can't access xrecovery or clockworkmod when i press back button or volume up stock at sony Ericsson white
Click to expand...
Click to collapse
It is a soft brick. Recover via PCC/SEUS
what kernel are you on ?
Did you make a full wipe before flashing the ROM ? If not , do it next time
need help
i make a full wipe i don't know my kernel version and i'm newbie and i don't know how to use PCC/SEUS . is it seriously danger at my phone
love_story99000 said:
i installed primeHD6 after i did that i can't access xrecovery or clockworkmod when i press back button or volume up stock at sony Ericsson white
Click to expand...
Click to collapse
I know you're problem! Some roms will disable recovery (for example: ICS for stock)
To fix this, Download X8Toolbox:
http://forum.xda-developers.com/showthread.php?t=1117100
You will need to have the drivers for your X8 Phone (download on sony's website)
You can install them through device manger!
Now open x8 toolbox, and install a recovery. You can choose
Good luck! after the installation your phone should be able to go to recovery!
I'm new to XDA!
Please press the "thanks" button if i helped!
it really helped
i want to know what stock kernel mean and how i can make latest kernel to my phone to install new ROM avoiding soft brick
???
i don't know waht stock kernel mean but i know how to install custom kernel
you will need flashtool and kernel that you want to installl
move kernel in firmwares in flastool folder
tha n run flashtool and turn off phone
go to flash and choose your kernel than press ok and connect you phone with pc in flash mode tha nafter the procces is done turn on phone and press back button until you go into xrecovery or CWM....
then flash to ROM
remember to do a full wipe
or in case of installing alfs kernel
flash latest version and install update adreno libs and other stuff unless it won't work ok...
press thanks if i helped
love_story99000 said:
i want to know what stock kernel mean and how i can make latest kernel to my phone to install new ROM avoiding soft brick
Click to expand...
Click to collapse
I think you are confused...
Take it from the start, its not necessary that you have brick when you install custom rom with stock kernel. If you have stock kernel you will search for roms which are for stock kernel..as simple as that...if you want to install custom kernel you have to unlock bootloader which is very risky and can't be done to all x8. If you want to check it take off your battery, there will be a code on your phone( no the one on battery) if it is under 11w29 then congrats you are from the lucky one that can unlock bootloader.
*stock kernel mean the original kernel that the phone have when you buy it
Sent from my X8 using xda premium
I inslld dis rom .....its gud but i cnt acess my xrecovery when i press back button ....cn anyone hlp thnx in advance
Sent from my E16i using xda premium
manu.melli99 said:
I inslld dis rom .....its gud but i cnt acess my xrecovery when i press back button ....cn anyone hlp thnx in advance
Sent from my E16i using xda premium
Click to expand...
Click to collapse
Download x8toolbox and install cwm.
Done
Sent from my X8 using xda premium
Thnk u man .....i done with it ....!!!
Sent from my E16i using xda premium

[Q] How do i solve this? VIDEO ADDED...

I got a X8 that has been bricked, but the phone still haven't reach me yet...
Last time i posted my topic here...
http://forum.xda-developers.com/showthread.php?t=1688987
but i posted at a wrong section, sorry about that...
This is the info from the thread i posted at the wrong section
Code:
Hi all...
My friend sent his X8 to a phone shop to get it updated to android 2.3.7 and ended up with a bricked phone cause by that phone shop.
Now, which according to him stuck at the white "Sony Ericsson" logo...Which i know is a soft brick and most probably can be saved by flashing it with PCC or SEUS or FlashTool.
I have ask him to flash it with SEUS or FlashTool, but not successful, still stuck on the SE logo, i doesn't know weather he do it wrongly or does not has any patient...
I gonna buy this phone from my friend, and repair the phone myself.
I want to ask u guys is there any other reason for the phone to stuck at the SE logo other than bricked phone? Could it be a hardware prob?
8/6/2012 UPDATE:
Just now my fren turn on the X8, it stuck at the white "Sony Ericsson" text, and after a moment, the phone reboot itself and stuck at there again and reboot itself again and again...
guys, based on the latest update from my friend, can this phone be saved?
And do share some experience if u do encounter such prob...
9/6/2012 UPDATE:
This morning i trying to flash my phone again...
I flash it with android 1.6 stock ROM (1.3.A.0.62) and it would boot up normally...
I also try to update the phone from 1.3.A.0.62 to 2.1.1.A.0.6 by using PCC, but also remain the same...
Then i flash it with FlashToool using 2.1 stock ROM (2.1.1.A.0.6 and 2.1.1.C.0.0) it would ended up like this see the video below
My X8 with 2.1 stock rom:
What type of brick is this?
Thanks...
Cheers...
And have a nice day
maybe its a dumb question, but have you tried with pc companion or flashtool?
maxee23 said:
maybe its a dumb question, but have you tried with pc companion or flashtool?
Click to expand...
Click to collapse
I have ask my fren to flash it with flashtool but still cannot...
Maybe he flash it wrongly or dun have patient...
I haven't get the phone yet...
Download latest flashtool and install flash and adb drivers. Search for xperia x8 stock firmware .ftf file. Try flashing with flashtool.
can your phone boot into recovery? any type of it
Thanks for reply guys...
There an update, just now my friend flash it with PCC, and successful, no error...
But still the same, stuck on white SE text and keep rebooting...
When the charger is pluged in, off line charging shows up, the silver colored battery...
pipi14 said:
Download latest flashtool and install flash and adb drivers. Search for xperia x8 stock firmware .ftf file. Try flashing with flashtool.
Click to expand...
Click to collapse
I will do that 2night when i got the phone.
Btw, just now my friend flash it without sdcard, there ntg to do with that right?
anthonyng said:
can your phone boot into recovery? any type of it
Click to expand...
Click to collapse
Nope, cannot...
Do you have recovery flashed?
If not then read how to do it and get it done then wipe all caches inc the dalvik in advanced menu..
lohtse said:
Do you have recovery flashed?
If not then read how to do it and get it done then wipe all caches inc the dalvik in advanced menu..
Click to expand...
Click to collapse
I think it has, or might doesn't have, cause i dunno what that phone shop did to the phone.
Furthermore my fren has flash the phone with FlashTool for a few time already, which i think all the data has been wiped...is it correct?
Hmm...Can i install recovery that the phone that cannot boot?
follow this link guide.And do it ur way..
If i helped press thanks ....
http://mkasharingiscaring.blogspot.in/2011/11/guide-how-to-unbrick-xperia-x8-d.html
silvergiri said:
follow this link guide.And do it ur way..
If i helped press thanks ....
http://mkasharingiscaring.blogspot.in/2011/11/guide-how-to-unbrick-xperia-x8-d.html
Click to expand...
Click to collapse
OK
Definitely will try it out...
UPDATE again:
Just now after flashing with SEUS, still stuck at the se logo and keep rebooting...
Update again...
This morning i was able to flash the phone with 1.3.A.0.62 stock firmware...
But one weird thing is i it state baseband as unknown...
but i still can receive sms and calls...
after that i flash it with 2.1.1.A.0.6 stock rom, and it stuck at the white SE logo and keep rebooting...
Help guys...
I dont really know bout the condition. Usually works with seus or flashtool. Maybe something has been changed, like kernel or/and baseband. Maybe u would need to flash stock kernel and baseband too. Try flashing them and hope it ll work.
Sent from my E16i
demonshouter said:
I dont really know bout the condition. Usually works with seus or flashtool. Maybe something has been changed, like kernel or/and baseband. Maybe u would need to flash stock kernel and baseband too. Try flashing them and hope it ll work.
Sent from my E16i
Click to expand...
Click to collapse
Hmm...
The stock kernel and baseband comes together with the ftf file package right?
Where can i get the stock kernel and baseband?
thanks...
boonwuilow said:
Hmm...
The stock kernel and baseband comes together with the ftf file package right?
Where can i get the stock kernel and baseband?
thanks...
Click to expand...
Click to collapse
try this X8_E15_2.1.1.C.0.0_generic.ftf.7z
Make sure your flashtool is at it's lastest version
Flashtool-0.6.9.1-windows.exe
Tips: Just double click the firmware during flashing operation and ignore second second windows that shows information about the .tft package & press ok
CKKnot said:
try this X8_E15_2.1.1.C.0.0_generic.ftf.7z
Make sure your flashtool is at it's lastest version
Flashtool-0.6.9.1-windows.exe
Tips: Just double click the firmware during flashing operation and ignore second second windows that shows information about the .tft package & press ok
Click to expand...
Click to collapse
I am using latest flashtool to flash with the dl link that u provided and still the same, stuck at SE logo...
Video Added
Here is a video of how my brick looks like...
Here's a tutorial.. https://www.youtube.com/watch?v=l7B-7tDaB5U
Press thanks if it helped
Sent from my X8 using XDA
gagan_sj said:
Here's a tutorial.. https://www.youtube.com/watch?v=l7B-7tDaB5U
Press thanks if it helped
Sent from my X8 using XDA
Click to expand...
Click to collapse
You are using lucastan txt am I wrong? LOL.
@boonwuilow
-> follow the step
1. Flash donut 1.6 ftf
2. Flash 015 baseband
3. Root
4. Unlock Bootloader(surely must depend on your manufacture number)
5. Flash Custom kernel
6. Flash custom rom
7. Sit down and test
Send from my E15i using xda premium.
Press thanks if helped
*Xperia X8 Black @ ICS miniCM9 3.0.2 on nAa ICS 03 kernel *
Thank you very much nAa!
Edit: Accidentally posted. Ignore this.

[Q] Reboot welcome screen Stuck~~ Help)))))

Dear All....
I've trying to upgrade my Sony Xperia X8 to android 4.0 with "cm-9.0.0-V02-X8-KANG".
After upgraded reboot, system will get stuck after "Sony Ericsson" welcome screen texts...
I've trying to press the Back button when the Sony Ericsson logo during bootup and doing the recovery, but, I just can't get into ClockworkMod Recovery mode.
Is there anyone who can advise how to make the phone work normal???
Many thanks~~~
chieh9899 said:
Dear All....
I've trying to upgrade my Sony Xperia X8 to android 4.0 with "cm-9.0.0-V02-X8-KANG".
After upgraded reboot, system will get stuck after "Sony Ericsson" welcome screen texts...
I've trying to press the Back button when the Sony Ericsson logo during bootup and doing the recovery, but, I just can't get into ClockworkMod Recovery mode.
Is there anyone who can advise how to make the phone work normal???
Many thanks~~~
Click to expand...
Click to collapse
maybe you flash wrong kerne dude!
maybe you can try this :
flash downgrade ftf..like x8 generic and you got your phone on 2.1
then root, unlock bootloader..
ow yeah, you can install recovery from Flash tool..
next
flash ics kernel, backup
factory reset, flash ROM
Thanks for your quick reply...
how can I root, unlock bootloader install recovery from Flash tool factory reset, flash ROM... etc.. since now I can't get into ClockworkMod Recovery mode when I press the Back button before Sony Ericsson logo during boot up????
Before you flash into ics, what rom you're using?
maybe you can flash it first .
Or
Like I say..flash the x8 generic..so you downgrade your phone
After that you can to root etc
Sent from my E15i using xda app-developers app
Ok.. I'm not the expert on this... all what I had done is search from the net.
as you can see this... (3w).androidauthority.com/xperia-x8-ics-cyanogenmod-9-62667
so, I really don't know what to do for my phone now... please advise.... many thanks....
chieh9899 said:
Ok.. I'm not the expert on this... all what I had done is search from the net.
as you can see this... (3w).androidauthority.com/xperia-x8-ics-cyanogenmod-9-62667
so, I really don't know what to do for my phone now... please advise.... many thanks....
Click to expand...
Click to collapse
haha..its okay dude!
relax..I will help you
maybe you watch my video on youtube..but sorry because I made it with Indonesian language..
maybe you can try it first!
hit thanks for me dude !
My phone even can't get work in normal,
It's just get stuck after welcome text "Sony Ericsson"
Can't do anything.....
I had made video what's happen on my phone..
But.. I just can't link up here....
Please help~~~~~~~
Many thanks.....
http://forum.xda-developers.com/showthread.php?p=19554219
Try that.
Sent from me to you
this is what my phone system stuck like.......
h??ps://vimeo.com/44906652
chieh9899 said:
this is what my phone system stuck like.......
h??ps://vimeo.com/44906652
Click to expand...
Click to collapse
okay I was watched your vid..
so did you success to unlock bootloader, flash ics kernel and ROM??
what tool you're using?
flashtool?
Yes, I was used Flashtool.
Any idea how to get back to ClockworkMod Recovery mode??
Thanks~~
chieh9899 said:
Yes, I was used Flashtool.
Any idea how to get back to ClockworkMod Recovery mode??
Thanks~~
Click to expand...
Click to collapse
yes you can!
read this this thread http://forum.xda-developers.com/showthread.php?t=1105745
hit thanks dude!
Hi...
I've read your link, but.. I still can't understand how to copy files into "system/bin and system/xbin" since I can't get into "ClockworkMod Recovery" when I boot up the phone, pls help step by step if is possible... thanks~~~
Have you succeeded in unlocking you're bootloader.. if yes..
you can try flashing the kernel again..
I would recommend iscreemdx with alfs kernel..
http://forum.xda-developers.com/showthread.php?t=1672477
If you haven't unlocked you're bootloader then flash back the stock rom using .Ftf file of our x8/w8 stock rom here
http://sony-w8.blogspot.com/2012/05/release200412-flashable-file-for-w8e16i.html?m=1
Hit tanx if it helps..
By the walking Walkman..
okay...
if you're still confuse, downgrade your phone!
its last option
downgrade into 2.1 - download this file from files crop X8 E15i 2.1.1.C.0.0._un.ftf
root your phone by flash tool..
then install xrecovery by clicking cross icon on flashtool
OR
download this file (password=cintaindonesia) and extract in your SDcard
after that copy paste three files(busybox, chargemon, xrecovery.tar) in system\bin
and you will get xrecovery
after that
unlock bootloader using flashtool OR s1tool
Flash the latest ICS kernel
backup
factory reset, wipe data, etc
Flash ROM
done! :laugh:
here my Video tutorial..but I'm sorry cz I made it with Indonesian language
http://www.youtube.com/watch?v=SIIG6A9MRkM&feature=g-upl
I'm trying to do it right now....
Hope it can help....
Offcourse if you really help my problem..
I'm sure will give you more then 1000 [email protected]@@@@@@@@
chieh9899 said:
I'm trying to do it right now....
Hope it can help....
Offcourse if you really help my problem..
I'm sure will give you more then 1000 [email protected]@@@@@@@@
Click to expand...
Click to collapse
hahaah
good luck for you dude!
Finally, My phone back to normal...
Once again, thanks for below this two guys post up wonderful and useful text to teach thanks all ...:good::good::good::good::good::good:
BlackRabbit1703 good::good::good::good::good::good::good::good::good::good:
sidhart :good::good::good::good::good::good::good::good::good::good::good:
Companion
u can use the sony ericsson companion soft to bring the phone back to live again, search for that, i do it one time without trouble and very easy
chieh9899 said:
Finally, My phone back to normal...
Once again, thanks for below this two guys post up wonderful and useful text to teach thanks all ...:good::good::good::good::good::good:
BlackRabbit1703 good::good::good::good::good::good::good::good::good::good:
sidhart :good::good::good::good::good::good::good::good::good::good::good:
Click to expand...
Click to collapse
glad can help to solve your problem dude! :laugh:

stuck in sony ericsson logo

i just install mini cam7 to my x8, after i reboot my phone it stuck in sony ericsson logo. they any solution for this problem????
By mini cam7 you mean MiniCM7?
If you see Sony Ericsson logo, it means that you are on stock kernel. MiniCM7 is for nAa kernel.
Solution - click
Solution?
Here you go- http://forum.xda-developers.com/showthread.php?t=1771338
sandung said:
i just install mini cam7 to my x8, after i reboot my phone it stuck in sony ericsson logo. they any solution for this problem????
Click to expand...
Click to collapse
You can use Flashtool to flash a stock ROM and act like nothing happened..
If you can still go to cwm by pressing back button while boot then you can get a rom that works on stock kernel on to your sd card and flash it or if u have back up then just reatore it..
Or
If u can't go to cwm then flash stock rom .Ftf file available in our development section and flash it..
Heres a guide to flashing
http://forum.xda-developers.com/showthread.php?t=1755215 http://forum.xda-developers.com/showthread.php?t=1755215
Sent by the walking walkman..
sidhart said:
If you can still go to cwm by pressing back button while boot then you can get a rom that works on stock kernel on to your sd card and flash it or if u have back up then just reatore it..
Or
If u can't go to cwm then flash stock rom .Ftf file available in our development section and flash it..
Heres a guide to flashing
http://forum.xda-developers.com/showthread.php?t=1755215 http://forum.xda-developers.com/showthread.php?t=1755215
Sent by the walking walkman..
Click to expand...
Click to collapse
No 1
Sent from my E15i using xda premium
okay!
This is for the last option! if didn't work to repair it using PC companion or SEUS
1. download X8 E15i 2.1.1.C.0.0._un.ftf from file crop and you willl get your phone on 2.1
2. install your flashtool
3. make sure if your baseband is 015 !
4. root your phone by clicking padlock icon in the Flashtool!
5. install xrecovery with flashtool by clicking the cross icon
6. unlock bootloader using s1tool and make sure if your phone type is not 11w29+ !!
http://forum.xda-developers.com/showthread.php?t=1254225
7. flash the latest kernel
8. backup
9. factory reset, wipe data, etc
10. Flash ROM
DOne!
BlackRabbit1703 said:
okay!
This is for the last option! if didn't work to repair it using PC companion or SEUS
1. download X8 E15i 2.1.1.C.0.0._un.ftf from file crop and you willl get your phone on 2.1
2. install your flashtool
3. make sure if your baseband is 015 !
4. root your phone by clicking padlock icon in the Flashtool!
5. install xrecovery with flashtool by clicking the cross icon
6. unlock bootloader using s1tool and make sure if your phone type is not 11w29+ !!
http://forum.xda-developers.com/showthread.php?t=1254225
7. flash the latest kernel
8. backup
9. factory reset, wipe data, etc
10. Flash ROM
DOne!
Click to expand...
Click to collapse
how many times have i see this post?!
this is spam and it is against the rules, at your post there is a number at the up , right corner, if you click at it you can see just your post, copy url and post it instaid of copy paste your post one hundrent times!!!!
really, i am geting bored of seeing this post everywhere
stamatis16 said:
how many times have i see this post?!
this is spam and it is against the rules, at your post there is a number at the up , right corner, if you click at it you can see just your post, copy url and post it instaid of copy paste your post one hundrent times!!!!
really, i am geting bored of seeing this post everywhere
Click to expand...
Click to collapse
what????
really dude?!
I made it by my self
just typing on my own keyboard
okay okay...
in the future I'll not doing spam again as you tell like that dude,,
thx! :laugh::laugh:
the easiest way to get back ur phone is using PCC.
Select "repair phone" and ur X8 will be back to stock

Categories

Resources