Hello,
I own a galaxy note n7000, rom ICS xxlpy, since a little bit than 1 week.
for some reason, I would like to root it, and followed this tuto :
http://www.galaxynote.fr/rooter-facilement-les-roms-stock-ics-sans-cwm-triangle-jaune-t4995.html
it is a french traduction from a tuto found here.
anyway, after having followed each step, i obtained no error, nothing which was different from the tuto.
after a reboot, my galaxy was unable to boot.
I was blocked on the first screen : samsung galaxy note GT-N7000 black scree, text in white color.
today : I can go in recovery, I can go in download mode, but I cannot boot.
so I have decided to send it to repair. it si why I need advices :
- what is exactly the yellow triangle ? where I can see it, how I can check if I have it or not (what manipulation to do to see it ?)
- how can I test my flash counter ?
I was on ICS stock, but I don't know if the manipulation in the Tuto had increase or not the flash counter ?
when I am in download mode, I can see : custom binary download : no, current binary : samsung Official. is it enough to get warranty ?
any advice allowing me to get back my device, with the maximum luck to get it repaired would be apreciate.
thanks
Olivier
My understandings are the yellow triangle shows up on the splash screen when it says galaxy note before boot animation and it is if you has a custom kernel installed, when you go to download mode it would say you are not on samsung official and have a flash counter so if it says 0 then you have nothing to worry about.
It sounds though that your device may not be fully bricked if you can access recovery and download mode, I would try to flash chainfires cfroot kernel for your firmware so the LPY v5.5 which is on his thread here
http://forum.xda-developers.com/showthread.php?t=1331784
If it works it will increase you flash counter and you will see the yellow triangle on start up.
Have you tried to use PC Odin to go back to stock GB?
Hi,
- so the yellow triangle should be visible on the normal splash screen, which we can see just after having switch on the device ?
I do't have this triangle.
- no, I don't have tried to revert to GB with odin.
to be honnest, I am affraid since I have bricked ( my be soft bricked ?) my device.
it is also why I ask for advice
may be I can try to unbrick it, but what are my chance to be successfull ?
if I unbrick it, this device will bne reliable ? it is strange that following the Tutorial, with no error message, I have bricked it, after the reboot.
( I mean the bug which seem to be in the kernel or in ??? which has helped tp brick my device, will b fix with custom ? or I will be able to brick it easily again, in all case because my device is bad ?)
so many question in my head
thanks
Olivier
You could try to flash a pre rooted gb rom in pc odin. If flash goes through successfully then you should be ok but if it hangs on fctoryfs then you may have a damaged emmc and will need to send away for repair. It just sounds like you are soft bricked. I'm not sure what thread has the pre rooted gb roms but last time I flashed one there was no yellow triangle. I can not remember who at the moment but someone in the criskelo v7 ics thread has a link in his signature with instructions and all files needed.
Sent from my A510 using XDA Premium HD app
Just go to dr ketans thread in developer section and get the stock rootable GB roms.
Zapped through server hops to XDA forums
Hi you are in a very similar situation in which i was in several days back. you can check out my video here: http://www.youtube.com/watch?v=WH--qVK2h3g&feature=plcp
I have my Galaxy Note fully functional now. Since your flash counter is 0 and with "Official Samsung" and not seeing the yellow triangle may allow you to claim warranty. To get it fixed:
Do not try to flash any GB/ICS via odin or anything. DO NOT use CWM also.Basically DO NOT try to do anything yourself because currently you are NOT fully bricked so Samsung will be able to fix it for u under warranty. Just go to your local Samsung Service Center and tell them you had done a factory reset from Settings.(Make up a story but do not tell them tht you attempted to root it otherwise they will not repair it). Hopefully if you have warranty they should fix it. They fixed mine by replacing the motherboard because in my case it was the eMMC bug. Since your phone has similar symptoms they should also fix it for you. Hope this helps. Cheers
Related
Can someone help me !!
I had some problems with the phone after deleting some system files (and the phone was looping at boot....) so I reflashed it with odin using Q1_20110914_16GB.pit and N7000XXKKA_N7000OXXKK5_N7000XXKK5_HOME.tar.md5 ..
The phone restart booting normally and everything is working except when it boot, just before the Samsung animation, I have a yellow triangle with the exclamation mark just below the "Galaxy Note GT-N7000"
the device is rooted and CWM installed on the device...
Boot the phone into download/odin mode. If it says that you flashed a custom ROM then you *hmhm* "successfully" incremented your custom flash counter.
Did you take a wrong rom when flashing with odin? Was your phone an AUT phone (since the rom you took I believe is an AUT rom)?
#Tapatalk #Galaxy Note
The yellow exclamation means it's been rooted. That way a service center knows you've rooted your phone, potentially voiding your warranty.
argh... my fault, please close this thread !!!
I guess I should have read a little bit more this forum before posting my question !!!
I'm new to android... .was playing with iphones before
Can somebody close / delete this thread I hate to pollute forums
ericshmerick said:
The yellow exclamation means it's been rooted.
Click to expand...
Click to collapse
This, my friend, is wrong. The exclamation mark (together with an incremented custom flash counter) means you flashed a non-approved on non-official rom or parts of it onto your device using the ODIN tool. No matter if rooted or not.
The device will continue to work inside certain parameters, its really only (as mentioned for a service rep for example) a visual and very obvious way to mark your device as having no warranty due to fiddling around with it in non-appoved ways. Thats all.
#Tapatalk #Galaxy Note
Is this permanent - can it be reset in future ?
Read this thread
http://forum.xda-developers.com/showthread.php?t=1354888
Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s
Can you exactly give the file name, which you have used to flash PDA section? and size of it
Titek said:
Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s
Click to expand...
Click to collapse
1. It doesn't matter while flashing using PC Odin.
2. Are you sure about which ROM you flashed ( Suspecting you have flashed Custom ROM)
3. Their is way to remove Triangle (!) , you should use JIG
follow the link for more details.
http://forum.xda-developers.com/showthread.php?t=1354888
Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
The file I could find using google was about 8Mo and the flash was quite fast.
(I used it for the PDA part)
I also referred to that thread :
(http://forum.xda-developers.com/showthread.php?t=1329360)
dr.ketan said:
---------------------------------------------------------------------------------------------------------------
When No Any other method works to Root your device, use this
---------------------------------------------------------------------------------------------------------------
Note that, this will downgrade your ROM to KJ1, after that you can update it.
Download: http://www.multiupload.com/YB9EL8D8O3
- Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin
Click to expand...
Click to collapse
using the file for KKA, but then, next flashing, the yellow triangle...
I'm working right now but I can repost here in a few hours the exact name of the file I have found using google that I could not find over here.
Anyway, do you think I can "repair" it without any JIG USB?
And yes, it was on a custom rom (the phone is just new, only a few hours in my hands ) but it's not my first one (i could flash a HD2 and the Samsung Tablet with no problems...
Titek said:
Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
Click to expand...
Click to collapse
This thing you did wrong, I have made lot effort to update Rooting guide here, still somebody How can find this guide i dont know.
Basically you have flashed with Netchip method, which was very first appeared, but later netchip also said, to not to use, b'coz it causing raise Flash counter
as well yellow triangle.
Now onwards remember, NEVER use PC ODIN to Flash Any Custome ROM/Kernel.
I am updating link here soon, how to reset your counter. You requires JIG for that
Edit : here is guide how to reset binaru count, n remove yellow triangle
http://forum.xda-developers.com/showthread.php?t=1354888
-------------------
BTW till you get JIG, just go to this thread http://forum.xda-developers.com/showthread.php?t=1424997 and download and flash ROM using PC odin(here it is stock ROM u can use it safely). you will get your phone working. later you can reset counter with JIG
Download my guide from here, how to update ROM, you can use Updating ROM with PC Odin section from guide.
Many thanks again, dr.ketan for such reply so fast
Hmmmm then I will have to wait for a JIG. I will order a JIG, it seems the price is not so expensive.
Thanks again for your comments and help, much appreciated
Ya jig is costing just 1-2 usd
Sent from my GT-N7000 using xda premium
dr.ketan said:
Ya jig is costing just 1-2 usd
Even you can make it at home, guide link is inside previous msg (how to use jig)
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda premium
My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?
Titek said:
My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?
Click to expand...
Click to collapse
See, JIG is required for totally different reason.
Your issue regarding, not connecting kies / Booting phone, won't be solved by JIG.
Jig can b use in two condition. One when you are unable to enter in download mode. I think, you dont have this issue
another To reset counter, for which you require JIG in your case.
Error you are facing right now during booting of device, can be solved by Reflashing ROM. You can flash any stock ROM with PC Odin, shud be enough to solve it.
Now regarding use of JIG, just enter in download mode, check Lt upper corner of devoce, it will have number of flash you have performed, i think in your case it must be 1 or more. which in normal case should be zero. Only To reset that counter, you needs Jig.
Thanks again.
Well, I download another stock rom but I got a "fail" (red color) above "id:com", when flashing on ODIN.
I am using Windows7 and tested the compatibility mode, the problem remains.
I have .md5 file that I put on PDA part. Then I click on Start but nothing, except the "fail" message.
When turning off the phone and on, I got the other message, said in my previous post :
"Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again."
So, Am I missing something.
About the download mode, the number is 7 in fact.
Oh I remember the file I wanted to flash via ODIN : netchip-cwm-update2.tar
It seemed to work just because the phone turned off and I got a "green" message that said that it was ok. (PASS).
I read one of your thread, when nothing works, so that man should go here :
http://forum.xda-developers.com/showpost.php?p=18981227&postcount=4
but the file (link) is not working now, so I can not get the file to test :s
But since then, I can not boot on Android anymore...
Yes unfortunately link is down since 2 days
Ya thats i guessed when i read you have used superuser zip, i have said earlier in 1 msg, you have used netchip.
Anyway, once go to recovery (vol up +home+power)n wipe data, clear cache, clear dwlvic caxhe.
Then put phone in download mode. Close firewall/antivirus on pc, open odin, connect device with download mode(vol down+home+power), if id com glow yellow, thn proceed with start
Gudluck
Sent from my GT-N7000 using xda premium
The main problem is that, too.
I can not enter Recovery, I got the yellow triangle.
I can only go in download mode, and when turning off and on the phone, the message said above :s
is JIG the only way to solve all that?
is my phone "blocked"? I am trying to test another stock rom, I'll give it a try and let you guess what happens.
EDIT 22:37:
The flash with that rom (N7000XXLA4_N7000DREKL1_DRE) has failed, even if it is a stock one.
Can I try to use any other rom from another country? Before I tried to flash the rom, I saw it was a KKA. Can I try so with a LA3 or something else, still stock one?
Oh man, that's so bad....
I think I found the problem...
I am using Windows7 64 bits.
My wife is on WindowsXP and I am using Odin on her netbook, and it's quite better !
the flashing is going on.
Hey !!!! that's all good !!!!! ^^'
My Galaxy Notes is working again ^'^'
Maybe should it be mentionned to be careful when using Windows7 64 bits, if some other members would have the same problem when flashing their roms?
Congrates !
ya it is common problem(win7), many time it has been discussed , but it is not that everytime it not works, but it happens in few cases.
When reading your answer yesterday, I thought I might had a chance to make my Galaxy Note working again without JIG.
Now I've downloaded Samsung drivers, for Windows7 64 bits, and I can flash with no problem. I'm backing up and can use CWM
Thanks again for your help and answers
I had the same problem, but then I decided to use the ORIGINAL usb cable and see: it did the trick !!!. Even on Windows 10 64bit !.
Seriously can someone please explain to me what the heck the above mean? I get the notion of a brick but what the heck is the difference between Super brick? Hard / Soft Brick? Finally, not really brick but what's Pixel Salad!?
Thanks!
altrstar said:
Seriously can someone please explain to me what the heck the above mean? I get the notion of a brick but what the heck is the difference between Super brick? Hard / Soft Brick? Finally, not really brick but what's Pixel Salad!?
Thanks!
Click to expand...
Click to collapse
Soft brick= a FAILURE of the device that can be reverted by the user
Hard brick= a FAILURE of the device that has to be reverted via external devices see jtag
Superbrick= a FAILURE of the device where the only solution the service center and a replacement of the component that malfunctions.
Pixel salad = a problem of the graphics unit or the screen to display correctly the image and put instead random colored pixels on some areas of the screen or the whole screen.
This is my interpretation of those issues everyone can correct it if he thinks that those expansions are incorrect.
Hope it helped you understanding few of those issues.
GL& HF
Sent from my GT-N7000 using Tapatalk 2
Braxos said:
Soft brick= a FAILURE of the device that can be reverted by the user
Hard brick= a FAILURE of the device that has to be reverted via external devices see jtag
Superbrick= a FAILURE of the device where the only solution the service center and a replacement of the component that malfunctions.
Pixel salad = a problem of the graphics unit or the screen to display correctly the image and put instead random colored pixels on some areas of the screen or the whole screen.
This is my interpretation of those issues everyone can correct it if he thinks that those expansions are incorrect.
Hope it helped you understanding few of those issues.
GL& HF
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
You are spot on!!
Hi, I flashed N7000ZSLPF ICS with bootloader and rooted afterwards. Everything was perfect until i decided to flash cm9 nigthly signed.zip and did a direct reboot. Now nothing happens when i try to turn the phone on
What kind of brick is this? Can somebody please tell me ?
Is there any possibilities to get the phone fixed?
Thank you all for your answers allready
Wish u all a nice day
Nefret90 said:
Hi, I flashed N7000ZSLPF ICS with bootloader and rooted afterwards. Everything was perfect until i decided to flash cm9 nigthly signed.zip and did a direct reboot. Now nothing happens when i try to turn the phone on
What kind of brick is this? Can somebody please tell me
Click to expand...
Click to collapse
I'm not 100% sure, but performing a flash under lpf isn't recommended. How did you root lpf after flashing? And when you say "did a direct reboot" what do you mean? Also when you say doesn't turn on at all, do you mean no display whatsoever or enters Samsung boot loop? Are you able to enter recovery or download mode?
Sent from my GT-N7000 using xda premium
Nefret90 said:
Hi, I flashed N7000ZSLPF ICS with bootloader and rooted afterwards. Everything was perfect until i decided to flash cm9 nigthly signed.zip and did a direct reboot. Now nothing happens when i try to turn the phone on
What kind of brick is this? Can somebody please tell me ?
Is there any possibilities to get the phone fixed?
Thank you all for your answers allready
Wish u all a nice day
Click to expand...
Click to collapse
You should have read the warning about LPx kernels (LP1, LP5, LP6, LPY, LPF)
Wiping or flashing in recovery will probably cause superbrick.
Sent from my GT-N7000 using XDA
Nefret90 said:
Hi, I flashed N7000ZSLPF ICS with bootloader and rooted afterwards. Everything was perfect until i decided to flash cm9 nigthly signed.zip and did a direct reboot. Now nothing happens when i try to turn the phone on
What kind of brick is this? Can somebody please tell me ?
Is there any possibilities to get the phone fixed?
Thank you all for your answers allready
Wish u all a nice day
Click to expand...
Click to collapse
The way to go from ANY non-CM9-based ICS Rom to a CM9-based Rom is via Gingerbread.
You should've first used PC Odin to go back to GB, root your Rom, then flash CM9.
You have most probably superbricked your phone.
SpyderTracks said:
I'm not 100% sure, but performing a flash under lpf isn't recommended. How did you root lpf after flashing? And when you say "did a direct reboot" what do you mean? Also when you say doesn't turn on at all, do you mean no display whatsoever or enters Samsung boot loop? Are you able to enter recovery or download mode?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Did root using cfs root trough Odin Pc. With a direct boot i mean that i just rebooted without doing the partiton thing just flashed the image and rebooted.
And when i say doesnt turn on at all i mean that absolutely nothing happens, no power at the screen no detection trough usb on pc no download mode or anything.
tryied to flash before and did just reboot, back then did just got the boot looop probem and did a recovery to ics. this last time i tried again to show a friend in a hurry and failed epicly
Nefret90 said:
Did root using cfs root trough Odin Pc. With a direct boot i mean that i just rebooted without doing the partiton thing just flashed the image and rebooted.
And when i say doesnt turn on at all i mean that absolutely nothing happens, no power at the screen no detection trough usb on pc no download mode or anything.
tryied to flash before and did just reboot, back then did just got the boot looop probem and did a recovery to ics. this last time i tried again to show a friend in a hurry and failed epicly
Click to expand...
Click to collapse
You are definitely bricked, I fear. Head to the nearest service centre.
I am from Kuwait ..
I purchased Samsung galaxy Note N7000 15 Days before
I have Installed King Droid ICS mania 2.1 later yesterday i updated to King droid ICS mania 3.0 and Samsung galaxy s3 Mod updated .. after that i restarted my NOTE but its not booting
i can go to Download mode and Recovery mode ..
even i can see the Install ZIP from SD card and all in CW ..when i Update it says
Can't Mount EMMC
I tried to Mount also But failure ..
I tried Stock rom of ICS official to Update Using ODIN 1.85 .. it stops at
<ID:0/008> factoryfs.img ..
I am worried I cant go for warranty Bcoz at Boot It says Binary count (5)
Please Help me Out
Hey all request for great help,
I think I got brick, a great one.
I was running KingDroid v7 with Notecore Kernel but wanted to upgrade to it in KingDroid v7.1.
So I have flashed Abyss 4.2 Red pill Original logo 4.2. after wiping through jbroid but when reboot in recovery I have received Yellow Triangle ! Icon under Samsung Galaxy Note - GT-N7000.
After that I have done all three wipes and flashed again Kingdroid v7 from SD card because I forgot to move KingDroid v7.1 in Internal SD Card.
During KingDroid v7 I have selected NoteCore 9 and LRK and 240ppi like something.
After completing the procedure I have restarted my phone but I found again Yellow Triangle ! Icon under Samsung Logo. I have waited around 10 to 15 minutes but could not see any of reaction so I thought this would not work on my device. So I have again removed battery and by using Vol Up + Main Button + Power and started in CWM.
I flashed again Abyss 4.2 and reboot into recovery. This time I have flashed LRT (Under LRB second Modem) with Speedmod v13 after doing all three wipes.
Here problem comes, after completion of compete procedure, I have reboot the system and waited for 10 to 15 minutes for starting the device but I am just stuck to the Yellow Triangle ! logo under Samsung.
After an half hour I have tried to go for recovery but it is not starting any thing rather just Yellow Triangle Icon !.
Tried many time and still trying to go for recovery mode but nothing happening.
Please do something... help me out....
I am in great tense... I thing its a big brick bug for me...
Thanks to all supporters in advance.....
Can you boot into download mode? If yes, then try flashing stock GB rom for your region (India I guess)
krishkamlesh said:
Hey all request for great help,
I think I got brick, a great one.
I was running KingDroid v7 with Notecore Kernel but wanted to upgrade to it in KingDroid v7.1.
So I have flashed Abyss 4.2 Red pill Original logo 4.2. after wiping through jbroid but when reboot in recovery I have received Yellow Triangle ! Icon under Samsung Galaxy Note - GT-N7000.
After that I have done all three wipes and flashed again Kingdroid v7 from SD card because I forgot to move KingDroid v7.1 in Internal SD Card.
During KingDroid v7 I have selected NoteCore 9 and LRK and 240ppi like something.
After completing the procedure I have restarted my phone but I found again Yellow Triangle ! Icon under Samsung Logo. I have waited around 10 to 15 minutes but could not see any of reaction so I thought this would not work on my device. So I have again removed battery and by using Vol Up + Main Button + Power and started in CWM.
I flashed again Abyss 4.2 and reboot into recovery. This time I have flashed LRT (Under LRB second Modem) with Speedmod v13 after doing all three wipes.
Here problem comes, after completion of compete procedure, I have reboot the system and waited for 10 to 15 minutes for starting the device but I am just stuck to the Yellow Triangle ! logo under Samsung.
After an half hour I have tried to go for recovery but it is not starting any thing rather just Yellow Triangle Icon !.
Tried many time and still trying to go for recovery mode but nothing happening.
Please do something... help me out....
I am in great tense... I thing its a big brick bug for me...
Thanks to all supporters in advance.....
Click to expand...
Click to collapse
Are u able to get into download mode?...if you are just flash a stock GB firmware if not try to get a jig...
There is no need to open the same thread again and again in diff sections. Reported.
Sent From My GT-N7000 Using XDA Premium.
sahilarora2003 said:
There is no need to open the same thread again and again in diff sections. Reported.
Sent From My GT-N7000 Using XDA Premium.
Click to expand...
Click to collapse
Hi Sahil, we appreciate your efforts for keeping the forum organized but you should understand his state of mind, he is assuming his phone is bricked and in these scenarios people do this kind of things, let him resolve his issue first and then you can report one of his thread. Moreover his threads are not in same section.
jeetu1981 said:
Hi Sahil, we appreciate your efforts for keeping the forum organized but you should understand his state of mind, he is assuming his phone is bricked and in these scenarios people do this kind of things, let him resolve his issue first and then you can report one of his thread. Moreover his threads are not in same section.
Click to expand...
Click to collapse
I fully understand his situation and tried to helped him. But we should follow the rules first. Every thread cost a beer(bandwidth usage) for XDA. Hope you understand my point.
Sent From My GT-N7000 Using XDA Premium.
sahilarora2003 said:
I fully understand his situation and tried to helped him. But we should follow the rules first. Every thread cost a beer(bandwidth usage) for XDA. Hope you understand my point.
Sent From My GT-N7000 Using XDA Premium.
Click to expand...
Click to collapse
yup, that's why I posted in his other thread about it being duplicate and never appreciate that
Thanks to all of you....
Dear all Senior Members (Mr. Sahil Sir),
I am really sorry for my such behavior that I have posted two thread for a single problem...
Actually, I was in dilemma that in which genre I need to post this problem. So I thought I will better post in both, in whichever post I will get reply I would solve it after I will tell moderator to delete the thread.
But you guys are like awaken lions, I have solved out within a minute. Actually I have not resolved the problem because I cannot flash until I get GB rom in my PC. so I need to have a nap here. . .
Tomorrow in the same post I will try to reply, what happened with my device...
Thanks to each member who have viewed and looked to this problem..
A joyfull joined hands to those seniors who have converted my tears into smile within a single minute .... Sahil Sir Salute to You....
How I have solved my Problem???
Hello Dear...
I have resolved the issue…
I have followed the below procedure...
1. Go and have coffee after keeping your device in charging first.
2. During this download Dr. Ketan's pre-rooted GB Rom
3. After this remove your battery once.
4. Press Vol Up + Main Button + Power
5. You are now going for download mode so press Vol up to flash Custom Rom.
6. Start Odin in your PC or Laptop.
7. Connect your Cable.
8. Wait until you will receive Yellow color in ID:COM. (Check ticked Reboot + F Reset Time)
9. Locate the downloaded GB Rom in PDA of Odin.
10. Recheck each step properly followed or not. And now press start.
Please take the expert advise before flashing anything, you are about to lose 30k under your kicked ass...
| T h £ G ® £ @ t G ! @ n t G @ | @ x ¥ |\|0t€ |
krishkamlesh said:
I am writing this for those who may face such Yellow Triangle! Icon bug in Future...
Click to expand...
Click to collapse
Just go to Download mode (vol down+home + Power) and let me tell what is Flash counter.
First of all this is not 'Triangle Icon bug' Triangle happens when you flash custom things with Odin, Bug is called when something happens in abnormal way during normal/ routine procedure.
Solution you have wrote is just confusing. I think still you are not clear what issue was and what you have solved.
Just presence of Triangle can't stuck your device.
Triangle which was appeared was due to flashing Custom kernel with Odin, it has no relation with stucking.
Your Flash counter must be high still., Nothing method mentioned above can clear it.
Can you tell me
What was issue you had ?
What you solved?
dr.ketan said:
Just go to Download mode (vol down+home + Power) and let me tell what is Flash counter.
First of all this is not 'Triangle Icon bug' Triangle happens when you flash custom things with Odin, Bug is called when something happens in abnormal way during normal/ routine procedure.
Solution you have wrote is just confusing. I think still you are not clear what issue was and what you have solved.
Just presence of Triangle can't stuck your device.
Triangle which was appeared was due to flashing Custom kernel with Odin, it has no relation with stucking.
Your Flash counter must be high still., Nothing method mentioned above can clear it.
Can you tell me
What was issue you had ?
What you solved?
Click to expand...
Click to collapse
I think it was 1 binary something. . .
I don't know what I have done to my device yesterday but it was like this.
1. I have been advised to install the kernel using Odin and I have flashed NoteCore 13v STD using Odin on PC. (KingDroid Rom v7)
2. I have restarted the device and the Triangle Icon was there. I didn't care about it but I have noticed that my battery was not working well even.
3. So I thought to flash NoteCore v13 OC as it consumes very less voltage compared to the other devices. This time I have used CWM to flash as I felt Odin would be dangerous.
4. After flashing I again found the same battery drainage. So I thought to go on the same basic kernel of KingDroid Rom as it was better than NoteCore for battery life.
5. I flashed Abyss Redpill Original Logo 4.2. and started wiping everything and installed 240ppi something and KingDroid bluetheme. (This was one problem because I need to select either among this.)
6. After completion of this process I felt that the device is not starting. As it was stuck to the Samsung Logo.
7. I removed battery and booted it in recovery mode. Flashed Jboid kernel cleaning. Flashed Abyss Rdpill 4.2
8. Again flashed the KingDroid v7 and in Aroma installer Selected Speedmod Kernel and LRT (under LRB) modem.
9. Flashed by selecting other options and given system reboot.
10. I was stucked here. After I waited half hour but there was not reaction and started posting on XDA.
11. Solution was made and I thought its a time for awareness...
I dont remember much about other things but whatever I know I have shared with you.
After flashing GB + Rooted and after it updated to the ICS.
Everything working well but would like to know in deep what mistake I have done as I read and only after I do flashing..
Please enlighten me...
Let me know your other questions.... Please give thanks if I am increasing my interest bit here...
thanks Dr. Ketan, You are a really great man behind the Galaxy Note XDA development.
I am not a bit responsible for Galaxy Note development, I am just contributor. and i have developed nothing nothing.
But Strongly recommend you to just delete your solution you wrote in previous post.
I never like to report any comment which is posted just innocently, and i believe same for your solution. This is not a solution but misleading guide. I think you still needs to learn and read more before making guide and solution for others. Here still you didn't understand what actually happened to your device and How did it solved.
There are already guide available regarding removing triangle.
Hope you can take my humble request seriously, just for having good to other newbies.
And yes earliest clear your flash counter, just removing triangle have no value in presence of raised flash counter.
dr.ketan said:
I am not a bit responsible for Galaxy Note development, I am just contributor. and i have developed nothing nothing.
But Strongly recommend you to just delete your solution you wrote in previous post.
I never like to report any comment which is posted just innocently, and i believe same for your solution. This is not a solution but misleading guide. I think you still needs to learn and read more before making guide and solution for others. Here still you didn't understand what actually happened to your device and How did it solved.
There are already guide available regarding removing triangle.
Hope you can take my humble request seriously, just for having good to other newbies.
And yes earliest clear your flash counter, just removing triangle have no value in presence of raised flash counter.
Click to expand...
Click to collapse
Thanks a lot for you valuable suggestion...
I mean to be myself as newbie only...
I will delete that post just now ...
I don't know how to clear the flash counter but when I press Vol down + Home button + power it shows following:
Proudct name= GT N-7000
Custom Binary Download: Yes (1 counts)
Current Binnary: Samsung Official
Please guide wherever I do not able to respond well to this forum. . .
Thanks . .. I know you are not a developer but you are being great source of help to me that is why I believe you ans Sahil sir as a man of Galaxy Note...
Thanks . ..
Just use triangle away to reset counter.
If you dont know where is thread, go to 'toolbox' on my signature and look for it.
Till you don't clear count, your warranty is no more valid.
Triangle appears when you flash custom stuff with PC Odin, and you have flashed kernel, thats why you had it. Which was removed as you have flashed stock ROM. but flash counter won't remove with it.
So your issue was not yellow triangle, but bad flashing which made your device stucked. But you have flashed kernel with Odin that why it was counter product along with stuck. Once you have flashed GB ROM and wiped your stuck was removed as well triangle too. But in real sense your counter was not reset (b'coz it is not possible with that)
Now you can better understand, why your title and solution was misleading. and I forced to ask to delete it.
Very well said by sr ketan.... Getting the yellow triangle under boot logo and getting stuck there is a different thing.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Just use triangle away to reset counter.
If you dont know where is thread, go to 'toolbox' on my signature and look for it.
Till you don't clear count, your warranty is no more valid.
Triangle appears when you flash custom stuff with PC Odin, and you have flashed kernel, thats why you had it. Which was removed as you have flashed stock ROM. but flash counter won't remove with it.
So your issue was not yellow triangle, but bad flashing which made your device stucked. But you have flashed kernel with Odin that why it was counter product along with stuck. Once you have flashed GB ROM and wiped your stuck was removed as well triangle too. But in real sense your counter was not reset (b'coz it is not possible with that)
Now you can better understand, why your title and solution was misleading. and I forced to ask to delete it.
Click to expand...
Click to collapse
Actually I have tried to delete the post but could not find option there to delete. I need to learn that to... So I have tried to edit but mean while I had to go so its still there but I will remove it as soon as possible and if I can not delete it I will just edit to correct matter.
I will follow your suggestions properly sir. Extremely sorry if I have created any misunderstanding in you.
I am away from town so very sorry for my late reply. Here internet is even not working...
Thanks a lot lot lot...
Sent from my GT-N7000 using xda premium
PierreTech said:
Very well said by sr ketan.... Getting the yellow triangle under boot logo and getting stuck there is a different thing.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks a lot sir... PierreTech...
You have been great part of help till now..
I will try to maintain rules and regulation here. Please guise me, whenever I find difficulty...:thumbup:
Sent from my GT-N7000 using xda premium
Not to worry
The way you wrote guide was just misguiding, Now you have edited it, so its OK.
However problem is solved. So Mods please close this thread
stuck to yellow triangle
bro. same prob in my phone.. i m trying to install cwm in my galaxy note n7000(indian) through odin. now my phone stuck to yellow triangle under samsung logo nothing is working.. how can fix...????
pls bro help.... sorry for bad english..
PLease Help Urgent my only phone doesnot working!!!!:crying::crying:
Hello Guys, Please help me because my phone is not working and this is the only phone i have so please help me soon.
What Happened:-
I had bought this phone 3 years back in 2012 after 1 month of purchase i updated my phone to official Jelly bean via Samsung kies but my phone had issues like blank screen failing to install official update, So i went to samsung service centre first they refused to service and told me that my motherboard is to be replaced because emmc not working but later they say no need to replace motherboard and installed official update and phone working fine later on i rooted my phone and installed various custom ROMS.
I had been using AICP rom based on kitkat and it is working fine. Some call comes and my phone launcher changed so i goto settings change my launcher but it doesnt change so i rebooted my phone. After that phone booted and AICP bootscreen logo comes after then automatically phone was switched off, Again i switch on the phone but same issue so i go to TWRP recovery and do wipe cache and wipe partition and rebooted my phone but nothing happened galaxy note logo appears and again phone goes switched off.
Problem:-
After that again i went to TWRP Recovery but now failed to go in Recovery mode. Then i go to Odin 3.07 and trying to install official jelly bean via Odin & it displays Pass. Again booted the phone samsung logo comes and then language settings came then after pressing next button phone switch off. After that i tried to install custom ROMS, Clockwork Recovery , Safe Kernels, and official ROMS but situation is same as earlier. Then i install PIT FILE via odin 16 gb pit file with official rom odin shows pass but the situation is same.
Then i go to samsung service centre they go to download mode and where it shows custom binary count:- 1 they told me that you install custom rom i said yes but right now it is on official one ( As i installed Official Firmware via Odin ). They told me that as your phone is old and has no warranty so we try to install our official firmware via odin with all files Like Pit File, Phone, Csc etc. but there is 50 -50 % chance if we fail then you have to replace your motherboard costs around Rs 8500/- or USD $134 which is huge money . Now after installing official firmware with all files got success in odin Phone rebooted with samsung logo and settings come after that phone again switch off means it fails according to samsung service centre.
So after that i become sad but i tried to go to recovery but now good news is yes i get samsung official recovery working perfectly now what to do ? How to check is my emmc corrupted or not ? How to install Lollipop Rom of bauner? How to make my phone working ?
I search xda forum on my issue but not getting exact my situation so Please Help me guys fast .... i think my phone is soft brick not hard bricked.
Thanks in advance for cooperating many needful person and making life easier with sharing of knowledge.:good:
Hi, try going back to official firmware ( i know you already have) , but look for a firmware package with "phone", "pda" and "csc" files to flash, then you're back to square one and can go to a lollipop rom. I had a similar problem and this fixed it
coko___bear said:
Hi, try going back to official firmware ( i know you already have) , but look for a firmware package with "phone", "pda" and "csc" files to flash, then you're back to square one and can go to a lollipop rom. I had a similar problem and this fixed it
Click to expand...
Click to collapse
Which official firmware you are saying and where to find that firmware with phone pda csc files because i searched many official firmware but there download links are dead now. So no option to download. If you have any then please give me link to download and step by step guide or Using Odin just like normally we do .
Thanks buddy for giving your valuable time and suggestion for help.
Does Anybody will help Dr. Ketan, forest 1971
Please Help me guys Dr. Ketan, Forest 1971 plz
Its 4 days and my phone is still not working everything tried but all results FAil:crying::crying: