Hay guys,
I am searching the camera fix here and found new ROMs in other thread.
I have some questions. Please help me to get it clear.
I am currently running
Android 4.0.3 / P1000XXJPZ
with kernel
2.6.35.7 SGT7-ICS-TE4M #20120410
9.0.0-RC0-GalaxyTab-HumberOS
and version #CM9-SGT7-TE4M-20120307
1- Can I flash "cm-9-20120528-UNOFFICIAL-p1c.zip" into my tab?
2- What is "update-cm-9-20120602-HumberOS-maguro-signed.zip" for?
3- Do I need to flash the kernel "cm9-kernel_20120624.zip" as well?
4- For the above resources, is CwM ok to flash them?
5- Do I need to wipe before flashing?
6- Other action required for upgrading the newest ROM?
Thanks in advance.
You have to be very very sure what you have.
GT-P1000 is a GSM tab not CDMA.
Look at what is printed on the lower back housing of your tab, what model is it written.
Or do you have SIM card slot on right hand side. If yes it is GSM.
From your details, JPZ modem and all, you are P1000 alias GSM.
NO. Don't flash the p1c Rom
Go look for the p1 nightly instead.
Unless you somehow managed to run JPZ modem on a vzw or Sprint tab, which is weird.
Sent from my HTC Magic using XDA
priyana said:
You have to be very very sure what you have.
GT-P1000 is a GSM tab not CDMA.
Look at what is printed on the lower back housing of your tab, what model is it written.
Or do you have SIM card slot on right hand side. If yes it is GSM.
From your details, JPZ modem and all, you are P1000 alias GSM.
NO. Don't flash the p1c Rom
Go look for the p1 nightly instead.
Unless you somehow managed to run JPZ modem on a vzw or Sprint tab, which is weird.
Sent from my HTC Magic using XDA
Click to expand...
Click to collapse
My pad can get connected to the Internet with CDMA network because I used that for 1 year.
Sent from my GT-P1000 using xda app-developers app
This is a first!
which CDMA network, BTW?
priyana said:
This is a first!
which CDMA network, BTW?
Click to expand...
Click to collapse
It's ChinaUnicom
Sent from my GT-P1000 using xda app-developers app
Ok, I don't know anything about China network.
But wikipedia says China Unicom is GSM.
Does it have a SIM card? if it is, it is GSM.
You may be mistaken WCDMA with CDMA. WCDMA is GSM.
CDMA is a different thing.
If has SIM card in your tab (not pad, mind you), it is P1000
download the p1 nightly.
priyana said:
Ok, I don't know anything about China network.
But wikipedia says China Unicom is GSM.
Does it have a SIM card? if it is, it is GSM.
You may be mistaken WCDMA with CDMA. WCDMA is GSM.
CDMA is a different thing.
If has SIM card in your tab (not pad, mind you), it is P1000
download the p1 nightly.
Click to expand...
Click to collapse
Yes, it's WCDMA. So, I can flash P1 nightly directly? What about the kernel?
Sent from my GT-P1000 using xda app-developers app
kernel is included.
just flash the cm9-nightly that you want, then flash gapps-ics
I recommend you get Alroger's build
http://forum.xda-developers.com/showpost.php?p=24986629&postcount=756
Yes, China Unicom （连通） and China Mobile（移动） are GSM. Only China Telcom （电信）is CDMA. You are quite lucky Priyana caught you at the right moment!
priyana said:
kernel is included.
just flash the cm9-nightly that you want, then flash gapps-ics
I recommend you get Alroger's build
http://forum.xda-developers.com/showpost.php?p=24986629&postcount=756
Click to expand...
Click to collapse
Thanks guy ~
Do I need to wipe?
Sent from my GT-P1000 using xda app-developers app
yappoe said:
Yes, China Unicom （连通） and China Mobile（移动） are GSM. Only China Telcom （电信）is CDMA. You are quite lucky Priyana caught you at the right moment!
Click to expand...
Click to collapse
Yes, so lucky I post it before flshing.
Sent from my GT-P1000 using xda app-developers app
s4065 said:
Thanks guy ~
Do I need to wipe?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Full wipe is always recommended. You may get ramdom problems without wipe.
yappoe said:
Full wipe is always recommended. You may get ramdom problems without wipe.
Click to expand...
Click to collapse
Thanks~
So I don't need to take care MTD issues in this stage, right?
Sent from my GT-P1000 using xda app-developers app
Hmm...
So you are not on MTD yet?
MTD was introduced some time in April.
Your post is a bit weird
2.6.35.7 SGT7-ICS-TE4M #20120410
9.0.0-RC0-GalaxyTab-HumberOS
and version #CM9-SGT7-TE4M-20100307
better do this if you can get shell access or busybox
$mount | grep mtd
if it returns blank, you are not on mtd
if so, you need to restock and load overcome kernel before you can flash mtd rom.
EDIT: if my memory serves me well, I didn't have to restock moving from BML to MTD.
Just flash it. anyway it will tell you if it works or not, so no harm.
priyana said:
Hmm...
So you are not on MTD yet?
MTD was introduced some time in April.
Your post is a bit weird
2.6.35.7 SGT7-ICS-TE4M #20120410
9.0.0-RC0-GalaxyTab-HumberOS
and version #CM9-SGT7-TE4M-20100307
better do this if you can get shell access or busybox
$mount | grep mtd
if it returns blank, you are not on mtd
if so, you need to restock and load overcome kernel before you can flash mtd rom.
EDIT: if my memory serves me well, I didn't have to restock moving from BML to MTD.
Just flash it. anyway it will tell you if it works or not, so no harm.
Click to expand...
Click to collapse
LOL ~ another wrong typing in my post. It's #CM9SGT7-TE4M-20120307. I've corrected it.
I've done Restock and Overcome before flashing ICS. I thing it's already a MTD ones. So I will flash P1 today.
Thanks again, buddy.
Sent from my GT-P1000 using xda app-developers app
Too bad. Stuck at start up logo over 10 min. Probably need to restore the backup.
After flashing "cm-9-20120605-UNOFFICIAL-p1.zip" with CwM.
Then quickly succeed flashing CM9 nightly. Based on Overcome it just needs to flash P1 ROMs. The secret is to remove (or unmount) the external SD card before flashing.
Related
T-mobile galaxy tab.
band: P1000XXJMA
kernel: 2.6.32.9 [email protected] #1
build: FROYO.XWJMI.Roto-JMI-v2
my current provider is Mobilicity which uses AWS network(HSDPA 1700/2100). Tab must work well on this provider since T-mobile galaxy vibrant is working so nicely with Mobilicity.
but the problem is even if i put the SIM card in the tab, the tab won't find any network. I rooted and unlocked properly.
help me~ what is wrong??
plz
please help me guys
Have some patience, that was just an hour... Anyway, did you flash a modem? Because otherwise it's not really going to work.
Sent from my GT-P1000 using Tapatalk
AlexTheStampede said:
Have some patience, that was just an hour... Anyway, did you flash a modem? Because otherwise it's not really going to work.
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
which modem should i flash to? is there any good rom that works with my provider??
No clue. Since you say TMobile tab works well, i'd suggest that one. However i'm not an expert by any mean, so you might want to look around/wait for more answers.
Sent from my GT-P1000 using Tapatalk
The T-Mobile US modem is the only modem known to support 1700/2100 AWS, so if you want 3G it's your only choice!
Regards,
Dave
Look for the standard TMO 3G modem in Roto's modem switcher thread in the dev section.
Sent from my SGH-I987 using XDA Premium App
ok, if the official release of ginger cane out for the O3D then why do we still have to flash the baseband? jjust thought it would be much simpler by now.
Sent from my LG-P925 using xda premium
a2r3f said:
ok, if the official release of ginger cane out for the O3D then why do we still have to flash the baseband? jjust thought it would be much simpler by now.
Sent from my LG-P925 using xda premium
Click to expand...
Click to collapse
No the official release is in kdz format and the baseband is included in that just look in the O3D dev forum they already have the official GB for the debranded European models
Sent from my LG-P920 using XDA App
AeRo0 said:
No the official release is in kdz format and the baseband is included in that just look in the O3D dev forum they already have the official GB for the debranded European models
Sent from my LG-P920 using XDA App
Click to expand...
Click to collapse
so can we get a flashable rom?
Sent from my LG-P925 using xda premium
Sorry for the innocent question, but this rom(Official GB - November, 21) have 3D converter for videos and games?
I've looked but have not found it.
stonyperson2 said:
Sorry for the innocent question, but this rom(Official GB - November, 21) have 3D converter for videos and games?
I've looked but have not found it.
Click to expand...
Click to collapse
Yes it does
that would awesome if i could get gb to flash on my device
Because its the European version.
does the European version has different baseband? I have unlocked AT&T LG Thrill 4G that I am using with T-mobile, which baseband should I flash with?
all i want to know is why isnt there a way to flash gb baseband and rom using cwm yet!!
Sent from my LG-P925 using xda premium
all i want to know is why isnt there a way to flash gb baseband and rom using cwm yet!!
Click to expand...
Click to collapse
coz most European providers using 2100/900/1800 MHz gsm band
but AT&T using 850/1900 Mhz
so we need base band software to communicate with baseband processor
(as example wifi driver for pc)
we still don't have exact base band for thrill 4g for GB so what we do borrow optimus 3d base bands
still no body able include baseband in cwm flash
when we flashing froyo rom we didn't had that problem coz we already had froyo base band in our mobile.
But when we switching to GB we need new base band ( as simple example windows xp wifi driver is not compatible with Linux Linux need sperate driver)
This is my understanding plz correct me if I'm wrong
The key is having the right modem.. we don't have the right one until thrill gets upgrade or 920h gets upgrade... Latin America...
I have changed over files that are connected to modem but was never succesfull and often ended in a boot loop or stuck at logo
So agree with uesheda
Sent from my SAMSUNG-SGH-I777 using xda premium
I flashed my unlocked Thrill 4G with O3D's official GB and it is working flawlessly with T-Mobile. I can get 3G signal and even enabled the FM radio.
I'm surprised a baseband hasn't already been ported from our Canadian friends, the Rogers O3D supposedly has the same model number and radio as our device, someone please correct me if I've heard wrong.
Sent from my LG-P925 using XDA App
I'm pretty sure they use the same freqs, but most of the western hemisphere does as well.
Sent from my LG-P925
Gnosishunter said:
I'm surprised a baseband hasn't already been ported from our Canadian friends, the Rogers O3D supposedly has the same model number and radio as our device, someone please correct me if I've heard wrong.
Sent from my LG-P925 using XDA App
Click to expand...
Click to collapse
Canada is still waiting for the update, too.
Europe unbranded devices got the official update.
Sent from my LG-P925 using Tapatalk
Hi, I have a rooted galaxy tab. I recently just installed a custom rom and after, it doesn't boot anymore? It only stucks at the boot screen. May I know what's the issue here? Is it a brick or something? Any helps appreciated. Tks!
it sounds like a soft brick, which isn't too bad at all Just switch your tab over to Download Mode and then flash another ROM that is confirmed working on your device.
A hard brick would be if your tab didn't power on in any way at all no matter what, and that would be pretty bad :/
Hi, tks for ur reply! Do u mind telling me where to download those roms? Tks once again!
Sent from my HTC Legend using XDA App
bryanqjx said:
Hi, tks for ur reply! Do u mind telling me where to download those roms? Tks once again!
Sent from my HTC Legend using XDA App
Click to expand...
Click to collapse
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
espionage724 said:
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
Click to expand...
Click to collapse
Yah, mine is the galaxy tab 7 P1000 as well. But mine is not from the US. It's from Singapore.
Sent from my HTC Legend using XDA App
And I wanna gingerbread rom.
Sent from my HTC Legend using XDA App
espionage724 said:
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
Click to expand...
Click to collapse
Hi! I managed to get my rom on samfirmware.com and even flashed it via odin. But one thing, it managed to go the boot screen but then it doesn't move at the "samsung" glowing screen after that. Did I do anything wrong?
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
priyana said:
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
K. I also came across this roto JME pre-rooted firmware v4. Will this work as well?
Sent from my HTC Legend using XDA App
You need dbdata.rfs
bryanqjx said:
Hi! I managed to get my rom on samfirmware.com and even flashed it via odin. But one thing, it managed to go the boot screen but then it doesn't move at the "samsung" glowing screen after that. Did I do anything wrong?
Click to expand...
Click to collapse
You may have a corrupted /dbdata. If that's true, no matter how many new ROMs or firmwares you install, it won't help you.
This should take care of your problem:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121
yappoe said:
You may have a corrupted /dbdata. If that's true, no matter how many new ROMs or firmwares you install, it won't help you.
This should take care of your problem:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121
Click to expand...
Click to collapse
I tried using the dbdata before. But it still doesn't work.
Sent from my HTC Legend using XDA
I have the same problem before when i was flsshing back to the original rom. But i set my tab to download mode and flash it into a new rom then everything is settle. Btw, am using OC 4.1.0 rom running on 2.3.6! Try it.
Sent from my GT-P1000 using xda premium
priyana said:
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
Hi! Tks for your advice. I just read through the restocking steps on the teamovercome.net. But I've got a question. Is it compulsory to actually install the overcome kernel and rom?
Izachii said:
I have the same problem before when i was flsshing back to the original rom. But i set my tab to download mode and flash it into a new rom then everything is settle. Btw, am using OC 4.1.0 rom running on 2.3.6! Try it.
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
Did you flash the overcome rom?
bryanqjx said:
Hi! Tks for your advice. I just read through the restocking steps on the teamovercome.net. But I've got a question. Is it compulsory to actually install the overcome kernel and rom?
Click to expand...
Click to collapse
I installed overcome kernel with many other rom before moving to redpill (because of bluetooth keyboard compatibility). It works great with most of rom 2.3.3 and 2.3.6 base. Don't hesitate to try the kernel with other rom.
Btw, did you try pushing new pit file through odin?
yappoe said:
I installed overcome kernel with many other rom before moving to redpill (because of bluetooth keyboard compatibility). It works great with most of rom 2.3.3 and 2.3.6 base. Don't hesitate to try the kernel with other rom.
Btw, did you try pushing new pit file through odin?
Click to expand...
Click to collapse
I haven't tried this process yet cause I am curious whether if its necessary to flash the kernel and the rom. But since its good, I will try it later! Tks btw.
Sent from my HTC Legend using XDA
Hey guys just a quick one,
Coming from Aussie stock, moved to paranoid Android and love it. However, I've lost H+ connectivity.
I had a read through the paranoid qanda and couldn't find anything... is it a matter of flashing a compatible modem in ODIN? Do I have to find an ICS modem or will GB do?
Plus, will it be the same solution for all roms?
Sent from my GT-N7000 using xda app-developers app
VincentRC said:
Hey guys just a quick one,
Coming from Aussie stock, moved to paranoid Android and love it. However, I've lost H+ connectivity.
I had a read through the paranoid qanda and couldn't find anything... is it a matter of flashing a compatible modem in ODIN? Do I have to find an ICS modem or will GB do?
Plus, will it be the same solution for all roms?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Change your modem. No difference between an ICS or GB modem. You can do it either using ODIN or CWM. You can get the modem from http://galaxynote.rgreat.ru/Modems/.
Geoux, youre a good man. Ill give it a bash, it can be done in CWM correct?
Thanks mate
Edit: Actually, do you know where Id find the modem that I should be using? I checked out ketans list, but it doesnt list modem.. It lists CDC and PDA
Is it possible to get bck the GB stock modem for JB?? Reason being is that my network now isn't as good as it used to when i was GB.. i often have low signal and i dont get the 'H' like i used to.. i really dont want to go bck to GB so I have flashed a few modems but none works as good as the stock one..Any suggestions?? .
ROM: SlimBean 4.1.2
Country: Jamaica
Sent from my SGH-I897 using xda app-developers app
shadieboy said:
Is it possible to get bck the GB stock modem for JB?? Reason being is that my network now isn't as good as it used to when i was GB.. i often have low signal and i dont get the 'H' like i used to.. i really dont want to go bck to GB so I have flashed a few modems but none works as good as the stock one..Any suggestions?? .
ROM: SlimBean 4.1.2
Country: Jamaica
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
I think the stock one is JK4 for JB. But for jamaica, I'd suggest looking at the modems your carrier is on, those would probably be the best.
Ok after doing some research i found out that the network I'm on uses the 900mhz frequency.. which modem uses 900mhz as default?
Sent from my SGH-I897 using xda app-developers app
shadieboy said:
Ok after doing some research i found out that the network I'm on uses the 900mhz frequency.. which modem uses 900mhz as default?
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
A modem with 850mhz unlocked would probably do great but what I think would be best is to find the base of your carrier's modem.
BWolf56 said:
A modem with 850mhz unlocked would probably do great but what I think would be best is to find the base of your carrier's modem.
Click to expand...
Click to collapse
Sorry for being a noob but I'm lost.. what do u mean by "the base of my carrier's modem"??
My network is Digicel
Sent from my SGH-I897 using xda app-developers app
shadieboy said:
Sorry for being a noob but I'm lost.. what do u mean by "the base of my carrier's modem"??
My network is Digicel
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
Well, JK4 is actually UGJK4. So let's say you have JK3 (UGJK3) and it works great, you know that the newer modem, JK4, will work well.
But now that I'm thinking about it, did your phone come with GB? If so, it's quite hard to us to know which modem is came with. Modems are by area so (almost) every carrier uses different one. There's a modem thread in the Dev section (stickied), you might have to try a few different one.
BWolf56 said:
Well, JK4 is actually UGJK4. So let's say you have JK3 (UGJK3) and it works great, you know that the newer modem, JK4, will work well.
But now that I'm thinking about it, did your phone come with GB? If so, it's quite hard to us to know which modem is came with. Modems are by area so (almost) every carrier uses different one. There's a modem thread in the Dev section (stickied), you might have to try a few different one.
Click to expand...
Click to collapse
When i got the phone it was running Froyo which I later updated to GB.. my brother's Cappy has the UCKK4 and he's still running GB.. we got the phone the same time and both updated the same time so I'm assuming that is what I had before I upgraded to JB.. I'm on JK3 modem but i can't seem to flash JK4 or any other modem.. it always ends with an error...
[Status: 0]
Installation aborted..
I re-downloaded the file several times and still nothing.. I even changed the CWM and nothing.... I'm on the verge of giving up
CWM: Semaphore 2.8.0
Sent from my SGH-I897 using xda app-developers app
U can use Odin3 v1.83 (the regular Odin) to flash a modem as well. Just pull the modem.bin out of the cwm zip of the modem u want, get into download mode, put the modem.bin in the PHONE tab/slot in Odin and flash.
Get the Odin here if u don't have it already... http://forum.xda-developers.com/showthread.php?p=33577757
If u r running a JB Rom, then u will have to use one of these modems...http://soggycashew.weebly.com/cm7miui--ics-modems.html
I have had success with the i9000ugkc1.
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
U can use Odin3 v1.83 (the regular Odin) to flash a modem as well. Just pull the modem.bin out of the cwm zip of the modem u want, get into download mode, put the modem.bin in the PHONE tab/slot in Odin and flash.
Get the Odin here if u don't have it already... http://forum.xda-developers.com/showthread.php?p=33577757
If u r running a JB Rom, then u will have to use one of these modems...http://soggycashew.weebly.com/cm7miui--ics-modems.html
I have had success with the i9000ugkc1.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I give up... i followed your instructions and ended up with an unknown imei so I had to re-flash everything.. I'm just gonna stick with the modem I have...
Thanks though.:thumbup:
Sent from my SGH-I897 using xda app-developers app
shadieboy said:
I give up... i followed your instructions and ended up with an unknown imei so I had to re-flash everything.. I'm just gonna stick with the modem I have...
Thanks though.:thumbup:
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
No need to give up, you can flash modems after modems without any problem. It just a bit time consuming.
To be safe, backup your efs folder so that if your IMEI is unknown again, you can use the backup.
shadieboy said:
Ok after doing some research i found out that the network I'm on uses the 900mhz frequency.. which modem uses 900mhz as default?
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
From what i know of the Captivate specs...the gsm 900mhz frequency that it can operate on is just the 2g/edge network. U said u saw the H before on GB rom (custom rom or leaked firmware, i'm guessing?). That letter H can be changed to read whatever letter u want. Just saying.
So in reality the problem may not be the modems (although some modems will work better than others for sure), it may just be the network service that your provider has in your area... It may just be low/bad cell signal.
What other frequencies are used by your provider ? Compare that with the frequency band specs of the Captivate and you will get a better answer on the quality of service you should expect. Maybe your provider has a coverage map that you could compare to as well.
Sent from my SAMSUNG-SGH-I777 using xda premium