Database Develop

Reboots when Usb connected

Flashed today my GT-I9000 to TO froyo I897UCJI6. I know i should not have done that now. But i really got pissed today at the gps of my phone and when i saw and update for galaxy s i just went for it, haven't checked the phone variant version. Thing is now my phone has no gps whatsoever it boots up fine but, sound only shows when i plug my headphones, accelerometer dont work correctly and so on....
So i though i`ll flash it back to stock. But the thing is once i connect the usb cable the phone just reboots and stays dead until the usb is disconnected.
I read the other threads but found no similar issues.
Here is a brief video of my problem
-http-://-www-.youtube.-com/-watch?v=MtcCvfCbAFk-
Remove all "-"
since i can`t post links
Anyone has any ideas how to get me back to stock?
Thanks!!
Damn i can`t even charge it!

Kinda weird indeed, try to remove the battery, wait a little, insert the battery and go to download mode (volume - / home / power) then start odin, put all files needed, and connect the usb, if it doesnt reboot hit start...

you got to enable adb debugging on your phone then open a command window and type: adb reboot download connect the usb to the phone and hit the enter key for the adb command before your phone fall asleep, then you are in download mode an can flash any rom with odin.
hope this helps, i flashed the same wrong firmware from the Vibrant.

Thanks Franklin, i tried the battery trick to no luck.
This is i cannot put my phone back to download mode because my "HOME" button is not mapped to do anything, seems like the "RETURN ARROW" button does the fuction when the system is loaded.
Any other ways to flash it back? Sd card or something?
Thanks for replies ;]

please try it my way it worked for me and i think it will work for you

I open the cmd navigate to c:\androidsdk\tools\ type in adb reboot download hit enter, it mounts daemon tools i plug in usb cable and 3 seconds later the phone goes blank and it stays unresponsive(no 3 key combination, not even the power button can turn it back on) i unplug the usb cable and the phone automaticaly shows the AT&T logo and starts up. The same happens when i plug my charger in!. Does that mean my SGS usb port is fried or something? Is there another way to flash my pnoe back to stock ROM?
I am so sorry i tried to make it better :[
Any clues?

no this is NOT a defective phone, its the result of the ROM and the 3 Button combo can´t work oh and you dont really mean deamon tools? and you musst plug the usb cable in the phone right before you hit enter or it can´t work!

I did that too. Like i said the phone turns it self off once the usb cable is attached.
Here is a brief video of my problem
-http-://-www-.youtube.-com/-watch?v=MtcCvfCbAFk-
remove all "-" from url.

dainiuxxx, this thread belongs in the Q&A section, not in development. Take a moment and read the "STOP, READ THIS BEFORE POSTING" thread at the top of both of these sections, it has clear guidelines for proper thread placement.

Sorry for that sirphukee.
Any help? Anyone?

Anyone that can help?

have you tried plugging it into another PC or Laptop?

Yup tried amothe laptop, reboot.
Wall charger, reboot.
So i`m kinda out of options?

yes, return it to the store, to get an exchange
a normal working SGS does not reboot when plugged into any USB port/charger
it's Shorted (damaged) for some reason

ok, return sounds good to me, but what will i have to say when they`ll switch on the phone and see the AT&T logo?
I`m in UK and my network is Orange UK.
Will they accept it back with no problems, i kinda doubt that....

uhh... you are in quite a pickle ...
try to remove the evidence, intentionally use a Update.zip ROM flash to kill the flash
or flash it to stock if you find a good ROM via Update.zip
use the WiFi to download the Update.zip ROM flash to the root of the internal SD to flash it.
ROM Manager can get the same results, you can WiFi install it from Market

AllGamer said:
uhh... you are in quite a pickle ...
try to remove the evidence, intentionally use a Update.zip ROM flash to kill the flash
or flash it to stock if you find a good ROM via Update.zip
use the WiFi to download the Update.zip ROM flash to the root of the internal SD to flash it.
ROM Manager can get the same results, you can WiFi install it from Market
Click to expand...
Click to collapse
Installed ROM manager from market, but seems it needs the phone rooted, right?
And rooting can be done only via usb cable, right?
Where do i find a Update.zip ROM via Wifi? and what are the procedures when i do find it?

OK,
so obviously the question now is HOW DO I F...k up my phone completely so no one could see what was done to it. When i`ll take it back to the shop.

dainiuxxx said:
Installed ROM manager from market, but seems it needs the phone rooted, right?
And rooting can be done only via usb cable, right?
Where do i find a Update.zip ROM via Wifi? and what are the procedures when i do find it?
Click to expand...
Click to collapse
you can ROOT the phone within the phone itself
by downloading Ryzaa One click lag fix from the market
instead of installing the lag fix, select the option to ROOT the phone

Same issue here. Amazing how easy it is to mess this phone up when you are really stupid. Oh well....
Tried the one click lag fix to root it, but cannot find a way to get into download or recovery mode. Tried every button combo I have seen suggested, but either gets stuck in a loop on the AT&T screen or just boots into the OS.
At the moment I feel my only option if we cannot find a way to get into download mode is to format the internal SD card and send it back to o2 (my provider), tell them it fried when Kies tried to do an update, cross my fingers and hope they send me a new one.

I can only enter Recovery mode

Hi,
I installed a bootloader with Odin And after that I needed to Install a GBOOT with Odin but I can't enter dowload mode I only can enter Recovery mode. What do I need to do ?
I used this http://forum.xda-developers.com/showthread.php?t=1117990

What phone do you have?
What recovery version are you running?
How do you get into recovery?
A tad more info would be useful please.
9. Whatever I flash, I end up in Recovery! What should I do?
Flash stock Vibrant bootloaders, then ODIN to stock JFD. You should be good to go here onwards... I only had this issue when I tried changing bootloaders over MIUI/CM7. Couldn't replicate on Samsung ROMs... (AS QUOTED ON THE LINK PAGE)

Thank you for your responds
The recovery mode I run is CWM v 5.0.2.7 .
The thing is Odin can't recognize my phone because I can't enter Downloading mode so I can't flash that.
Hope you can help me further

if you got any rom's stored on your sdcard you could try to flash that and then try to enter download mode, otherwise you could go to "mounts and storage" and mount usb storage there and move over an rom to flash.

Try to flash phone via cwm. Now we have jvz deodexed version on forum. Maybe after it will be ob.
Wysłano z GT-I9000 z użyciem Tapatalk

I've tried to flash a rom from my SD card.
@Emek can you explain it more clearly. I don't understand it.
Grtz William !

There is a rom on here you can flash using CWM. On the forum is a JVZ that you can flash without using ODIn, slap that on your sd card, goto recovery and install from sd and hopefully that should fix it

Sorry of being such a noob. What's a JVZ and which one do I need to flash.
Grtz William

I flashed this one Click
And It still doesn't work...
edit: Tried this one as well Click
It still doesn't work. I hope my phone isn't Bricked. Is he ?

They wont work as you need the correct gingerbread bootloaders installed first.
You ned to make or buy a jig then you can get the phone to access download mode again, and then using ODIN 1.83 reflash everything inlcuding the bootloader.
Jig instructions http://forum.xda-developers.com/showthread.php?t=819551
Failing that, see if you can buy a jig from ebay

Ok thank you. I ordered yesterday a JIG from ebay.
What do I need to do then. What do I need to flash exactly ... I don't want to screw it up another time. I liked the MIUI rom but he didn't recognize the external SD so that's the reason why I flashed other bootloaders.
So I would like to have MIUI with working SD card.
If the SD card doesn't work I won't to flash the original Android.
Grtz William

I would download and flash this for starters, it contains a bootloader as well make sure you click the bootloader section in ODIN.
http://forum.xda-developers.com/showthread.php?t=1380402
Then you can flash a custom rom afterwards, but dont change the bootloader once it works!

buttwad said:
I would download and flash this for starters, it contains a bootloader as well make sure you click the bootloader section in ODIN.
http://forum.xda-developers.com/showthread.php?t=1380402
Then you can flash a custom rom afterwards, but dont change the bootloader once it works!
Click to expand...
Click to collapse
I tried to flash it but Odin said that it failed. But the ****ing thing now is that when I connect my phone to the usb my computer doesn't recognize it and odin doesn't recognize it at well. Please help ! I just want that my phone works !

Anybody please...

Once I was playing with downloading and recovering mode I got into recovery mode then I was unable to get back to normal phone or downloading screen
what I did I pull out battery put out my sim.
I pressed volume up and down and home button togather and then pressed on button it worked out for me you should try that might work for you may be or maybe not.

shez555 said:
Once I was playing with downloading and recovering mode I got into recovery mode then I was unable to get back to normal phone or downloading screen
what I did I pull out battery put out my sim.
I pressed volume up and down and home button togather and then pressed on button it worked out for me you should try that might work for you may be or maybe not.
Click to expand...
Click to collapse
I bought a JIG so I can get into download mode right now so then I flashed the ROM that Buttwad proposed. But ODIN said the proces of flashing failed and no when I connect my phone to my pc my pc even don't recognize my phone so I can't put anything on my phone. What do I need to do. I am desperate.

u can acces the phone sd in recovery..

Am I blind or have you actually FLASHED a Vibrant bootloader over Galaxy S??
Seems like you have issues with key combinations. Try using the Volume down with power button and see if it could get you to the download mode.
Also, if your device is being detected by the phone, use "adb reboot download" to reboot the phone into download mode.

Here is the situation: I had the MIUI rom on my phone but my phone didn't find my external SD. So i searched a bit on the internet and I found a guy who had the same problem and he said that I needed to flash the Vibrant bootloaders so I did that. But then everytime I started up my phone I came in Recovery mode. I couldn't even acces downoading mode anymore. So first I tried to flash two other roms(This one And this onebut the problem stayed the same. So I bought a JIG and then I tried to put this bootloaderon my phone but Odin said ERROR after a while. So then I tried to flash this one.
But now I can't even enter recovery mode. When I start up my phone I see a pictogram with my phone and the pc with the sign that I can't connect them.
And my computer also don't find my phone anymore so I can't flash anything anymore.
Please Help !
I will give 8 euros to the person who can tell me step by step(easy) what I need to do to make my phone working.

how to install miui?

[Q] I9001 doesn't start

Hi everybody,
I have a problem with my Gt-I9001.
Yesterday I tried to put Rom application on my phone and now he is not responding anymore.
I selected in Clockworkmod to restart in recovery mode wich he did.
He made a properly back and started to load the Rom Siyah-s3-v1.2.6-CWM wich is incorrect for this phone. He installed it and drop dead.
He doesn't respond to the normal recovery or download buttom combo's.
There's no light, nothing on the phone.
What to do? Please help?
Thanks for your valuable time!

hmmm...remove the battery for 10 sec,put the battery and try to put in townload mode power off+home button+volume down.if dont work make an jig.how?:you need resistor with value=300 K Ω,remove the plastic from the micro usb.(buy an samsunc usb caple pc-device).look in pictures how to stick the wires:http://www.forum.scorpyons.ro/thread-8.html
and you can look in the video how to put in download mode with jig.(remove battery,put the jig,put batery,and wait for downloade mode.and install an rom with odin.(if you dont know smth pm me),but if with jig dont work,i think its a permanent brick.(only samsung can solve if is a permanent brick)

thnx man, but i went to the shop and gave him in for repare. Let's see what it brings.
cheers

You can throw it away.

[Q] Help with CWM 6.0.14

Hey guys
I've been following the forum for a while, but never posted anything, but now I need to.
So, I flashed a CWM, to be more specific this one http://forum.xda-developers.com/showthread.php?t=1852725
And now, I can't do nothing with the phone, can't flash the recovery 5.0.26, can't recover backup.. When I try to restart the phone, it aways goes automacally for the recovery, I took the battery off but still nothing. Even pluging the charger, the phone turn on and goes to recovery..
So I'm here to ask: what should I try? I think if I install CWM via ODIN everything will be ok right? I can't do this right now cause i'm without my usb cable. What u guys know about this?

Thread moved to the Q & A section, post in the relevant sections next time.

shucrut said:
Hey guys
I've been following the forum for a while, but never posted anything, but now I need to.
So, I flashed a CWM, to be more specific this one http://forum.xda-developers.com/showthread.php?t=1852725
And now, I can't do nothing with the phone, can't flash the recovery 5.0.26, can't recover backup.. When I try to restart the phone, it aways goes automacally for the recovery, I took the battery off but still nothing. Even pluging the charger, the phone turn on and goes to recovery..
So I'm here to ask: what should I try? I think if I install CWM via ODIN everything will be ok right? I can't do this right now cause i'm without my usb cable. What u guys know about this?
Click to expand...
Click to collapse
it was WIP so it can have problems........................can you tell why can't flash the recovery 5.0.26

Flash with Odin,your phone will be perfectly fine
Insert witty sentence here

Solved
aayushkhajuria2842 said:
it was WIP so it can have problems........................can you tell why can't flash the recovery 5.0.26
Click to expand...
Click to collapse
A tried but it didn't intall, give me an error and a message like " error: Installation Aborted"
But anyway, I've got an USB cable today and was able to flash CWM via ODIN and work perfectly. Btw thx guys for the replies :laugh:

help me enter cwm 6 plzz
shucrut said:
Hey guys
me i root my lg optimus 4x all was ok i install clockwork 6 install 4x recovery reboot recovery ... now nothing happen its stuck at the videotron startup screen ..it reboot in stock recovery but cant do nothing ...usb really hard to connect via the pc ....help me guys i want to know how to put thwe cwm recovery and flash cm10... tanxs in advance
I've been following the forum for a while, but never posted anything, but now I need to.
So, I flashed a CWM, to be more specific this one http://forum.xda-developers.com/showthread.php?t=1852725
And now, I can't do nothing with the phone, can't flash the recovery 5.0.26, can't recover backup.. When I try to restart the phone, it aways goes automacally for the recovery, I took the battery off but still nothing. Even pluging the charger, the phone turn on and goes to recovery..
So I'm here to ask: what should I try? I think if I install CWM via ODIN everything will be ok right? I can't do this right now cause i'm without my usb cable. What u guys know about this?
Click to expand...
Click to collapse
​i come its so hard to put a comment lolll message to short or not valis code lolll lollll

[Q] [q] galaxy ace bricked flashing cm7! Help please!

Hello, I was trying to root and install the CM7 on my Samsung Galaxy Ace GT-S5830B. The root and the cwm installation processes worked with no problems, but when I installed the CM7 it just turned off and won't turn on again.
I can't flash a stock ROM via Odin cuz the pc won't recognize the device. It won't turn on in normal mode, downloading mode nor bootloader.
What can I do to solve this issue, please?
Thank you!

archangellz said:
Hello, I was trying to root and install the CM7 on my Samsung Galaxy Ace GT-S5830B. The root and the cwm installation processes worked with no problems, but when I installed the CM7 it just turned off and won't turn on again.
I can't flash a stock ROM via Odin cuz the pc won't recognize the device. It won't turn on in normal mode, downloading mode nor bootloader.
What can I do to solve this issue, please?
Thank you!
Click to expand...
Click to collapse
Which ROM You have flashed? If You can´t go to Recovery or Download mode, try USB JIG, if not work with JIG, I am sorry Your phone is bricked.
If Your phone can´t nothing try put out battery, connect Your Ace with usb cable (without battery), open odin, hold 3 buttons for download mode (vol.down+home+power) and WITH holding buttons put back baterry. If in Odin You can see yelow oblong with COM, You can now try flash new stock rom.

Paul Koty said:
Which ROM You have flashed? If You can´t go to Recovery or Download mode, try USB JIG, if not work with JIG, I am sorry Your phone is bricked.
If Your phone can´t nothing try put out battery, connect Your Ace with usb cable (without battery), open odin, hold 3 buttons for download mode (vol.down+home+power) and WITH holding buttons put back baterry. If in Odin You can see yelow oblong with COM, You can now try flash new stock rom.
Click to expand...
Click to collapse
I tried installing Cyanogenmod 7.2. And err, is there any other way of trying to restore the phone instead of the USB JIG, cuz I don't have any. :/
I've already tried to go on the download mode by the steps you just said (power button+vol up./down + home), but the phone seems to be dead, it won't turn on in normal mode, download mode nor recovery. As the phone won't start in the download mode, i'm not able to flash anything via ODIN.
Is there anything else I could try? What if I try to flash STOCK ROM via ADB to SD CARD using ANOTHER CELLPHONE?
Thanks for helping.

Ah, another important info is that I think the phone "died" with the USB Debugging deactivated, so I think that's why the ADB can't recognize the device, right?

archangellz said:
Hello, I was trying to root and install the CM7 on my Samsung Galaxy Ace GT-S5830B. The root and the cwm installation processes worked with no problems, but when I installed the CM7 it just turned off and won't turn on again.
I can't flash a stock ROM via Odin cuz the pc won't recognize the device. It won't turn on in normal mode, downloading mode nor bootloader.
What can I do to solve this issue, please?
Thank you!
Click to expand...
Click to collapse
Try, to downnload the drivers of the SGA, in the samnsung page, if it works, use a stock rom that don´t be a one package. Sorry for my bad english.

Wrong section!
Use Q&A Thread the next time
Can you boot into CWM?
If your device is still valid warranty send it
for service