[Q] I9001 doesn't start - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi everybody,
I have a problem with my Gt-I9001.
Yesterday I tried to put Rom application on my phone and now he is not responding anymore.
I selected in Clockworkmod to restart in recovery mode wich he did.
He made a properly back and started to load the Rom Siyah-s3-v1.2.6-CWM wich is incorrect for this phone. He installed it and drop dead.
He doesn't respond to the normal recovery or download buttom combo's.
There's no light, nothing on the phone.
What to do? Please help?
Thanks for your valuable time!

hmmm...remove the battery for 10 sec,put the battery and try to put in townload mode power off+home button+volume down.if dont work make an jig.how?:you need resistor with value=300 K Ω,remove the plastic from the micro usb.(buy an samsunc usb caple pc-device).look in pictures how to stick the wires:http://www.forum.scorpyons.ro/thread-8.html
and you can look in the video how to put in download mode with jig.(remove battery,put the jig,put batery,and wait for downloade mode.and install an rom with odin.(if you dont know smth pm me),but if with jig dont work,i think its a permanent brick.(only samsung can solve if is a permanent brick)

thnx man, but i went to the shop and gave him in for repare. Let's see what it brings.
cheers

You can throw it away.

Related

[Q] Heelp!! Black screen, stuck at logo.

HI everybody,. can u help mee!! At 1st excuse my bad english ^^. I've got a Samsung Galaxy last week. After reading about 2.2 (it was eclair) I decided to flash. I've done it succefully. But after that many apps crashes at lauching, so i decided to reflash, but i'Ve forgotten to "REMOVE LAGFIX!!!". Now stuck at Samsung Logo. No Recovery meode, >No dwnload mode 5Its now i see it was a fix for that .. sic). I've read about all methods. Isn't there another way, except cable jig thing, or sending it to customer care (they wont take it cos' flashed.. sic...)?? I'm desesperate, pls help mee!! TY
Had the exact same problem champ...
I took my battery out and put it back in, then held down Volume Up and the Home key together, then pressed the Power on button. This should take you into the recovery mode; once you're here do a factory reset. I did this and it then booted into Froyo 2.2.
Hope it works!
Edit: After re-reading, are you sure you can't get into recovery mode? Are you SURE you're doing it correctly?
Had exactly the same problem. Mine was Singtel JG4, the three button combo never worked, and can't get to recovery mode. Send it to Samsung, after analyzing, they said they can't flash it (they're using Odin btw). Funny thing is the phone able to enter Download mode but when plugged in the PC, the message is "USB Device Not Recognized". Solution:the Samsung technician open up the unit, clean the USB socket/resolder and voila.... upgraded to Froyo (pheeeeeeeew.......)
Ok, good news. After making cable Jig, mine worked. So i enjoy you to alway have one for desperates cases!! TY a lot!!

[Q] Darkys 7.0.2

hi...
I hope somone can help me..(Please)
I installd Darkys 7.0.2 now.
after its was finished the phone wont start. its black, cant do anything.
Is my phone dead???
Please help
chamon said:
hi...
I hope somone can help me..(Please)
I installd Darkys 7.0.2 now.
after its was finished the phone wont start. its black, cant do anything.
Is my phone dead???
Please help
Click to expand...
Click to collapse
Describe the steps you took to install Darkyy's 7.0 Rom?
What firmware and recovery did you have before you flashed the new rom?
Can you access Recovery or Download mode still? (make sure you pull your battery and reseat before attempting this)
I had darkys 7.0.
Today i flashed darkes 7.0.2
I placed the rom on sd
opend rom manager
Install ROM from SD card
wipe data/cache.
when it install was finished the phone just die.
i tried to start with 3 way comb its black.
You were meant to install with CWM I believe.
I just follow the instr..
can i reseat the phone by pressing some button on the phone?
Seems like an empty battery to me
jaju123 said:
You were meant to install with CWM I believe.
Click to expand...
Click to collapse
Rom Manager is an app that uses CWM recovery, it's the same developer for both.
What can i do?
Is the phone dead?
I have charge the phone all night, still dead.
Does your phone have the 3 button combo enabled ? Are you able to access Download or Recovery mode ?
i have 3 combo..
it dont work.
when i charge still black dead.
chamon said:
i have 3 combo..
it dont work.
when i charge still black dead.
Click to expand...
Click to collapse
Does your battery charging icon show when your phone is off and charging ?
You can also try removing the battery, reinserting it and quickly trying to access download or recovery mode. See if that works...
if all the methods and jigs to power up the phone fail, then you have fully bricked it.
it happend to me aswell i have fully bricked my sgs and nothing worked to turn it back on.
sent it away to samsung for repair 2weeks ago and its now on its way back with a new motherboard, lesson learnt.
SEND IT TO SAMSUNG THEY WILL FIX IT
Take the battery out, wait 15 seconds, push 3 button combo while inserting the battery, repeat if necessary. If still no recovery or download mode then buy a jig or send it to Samsung.

NEED HELP!!! Screen black!

I have a big problem! i wanted to flash with Heimdall... I tested a rom, but not satisfied, i wanted to test another one and my Samsung Galaxy Tab don't want to turn on...
No Samsung logo, No Galaxy Tab logo... Nothing! Like the Samsung Galaxy tab don't want to turn on when i push the ON/OFF Button!!!
What can i do???
Please help!
Please HELP!
EmryX said:
Please HELP!
Click to expand...
Click to collapse
If you're able to provide information as to exactly what you did to get your device in this state that would be immensely helpful in regards to diagnosing the problem. However you'll probably be able to recover your device using a custom jig.
I can not be more explicit. I wanted to try a rom. Wasn't satisfied so i downloaded another one (with cache file, database file, bootloader, etc... ) but the file have been dowloaded too quickly (i think the zip file was corrupted...)
So i did the flash, and my tab don't wake up. I don't have a brick state (with the usb and pc logo). I don't have the samsung/galaxy tab logo. Ihave nothing on my screen. Like my on/off button was broken...
And whatever i do(like the combo on/off with the volume down), my computer don't recognize the tab. So i can't flash it again.
EmryX said:
I can not be more explicit.
Click to expand...
Click to collapse
Well you're going to have to be if you want anyone's help.
What files did you flash? Which software did you use? Which version? Were you given errors? How did you flash the files?
Please provide a detailed step by step run-down of exactly what you did.
I can't remember, and i'm french, i can't find the right word to explain the situation...
I flashed my tab with HEIMDALL (the last version on the website) i think the problem is when i wanted to flash with the file EURO.pit (i choose this file in the "bootloader" category of the software HEIMDALL).
The problem... My computer can't recognyze the tab because i can't turn on the tab, so... I don't know what can i do.
EDIT: And HEIMDALL don't tell me any error. Just "Flash Complete, Rebooting"
EDIT 2: I think i used the wrong bootloader...
Up?
What can i do? Is a batterie problem?
Let your Tab charging for 5 Hours and then try again.
Sounds like you've flashed a bootloader not designed for your tablet. Luckily all Galaxy S devices store a backup copy of the secondary bootloader which is utilised when a certain resistance is detected on the USB port. You can send it off to Samsung and they'll repair it, but they might charge you. The other option is to build your own custom jig which will activate the backup secondary bootloader.
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
@Benjamin: I can do a custom jig for a galaxy tab?
EDIT: But i don't think the jig will help me..
"If your phone screen is always black, that is it does not display the white Galaxy S/Samsung/AT&T logo when you switch it on, then sorry, this jig will not help you. "
HELP please? Can i do a custom jig for the galaxy tab? And How?
press and hold the power button for 10 second make sure it totally off
then try to enter download mode
if u are able to enter download mode
flash roto jme v4
if it a battery problem
i think it may be battery flat, try plug it in to the charger see if it work after 10 min
suprajztwenty said:
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
Click to expand...
Click to collapse
almost the same thing happened to me. how ever mine will not turn on at all. it gets warm when it charging and then cold when the battery is dead. i have it sitting until it drains.
i am waiting to hear from Samsung. I will keep you posted.
Can anyone out there help. I tried to load overcome's rom and it passed all the steps, and then the screen just went dead
Try to power on together with volume down bro. Lets see if the android image with broom will pop.
Sent from my GT-P1000 using XDA App

[BRICKED AGAIN !] Black screen, no bootscreen, no detection

Yesterday after unbricked my note from lpy brick (for the 5th time), I tried to flash a stock rom with a pit file (found somewhere on xda, special 16gb pit file for restoring bricked device) but the flash stuck at the begginning so I unplugged it.
Now my phone is unable to go in Download mode, recovery mode neither normal mode.
The screen stay black whatever I do, I've tried all the combinaison possible...
I tried to put it in charge all the night but now the problem is still here.
Any help appreciated
Phenom2 said:
Yesterday after unbricked my note from lpy brick (for the 5th time), I tried to flash a stock rom with a pit file (found somewhere on xda, special 16gb pit file for restoring bricked device) but the flash stuck at the begginning so I unplugged it.
Now my phone is unable to go in Download mode, recovery mode neither normal mode.
The screen stay black whatever I do, I've tried all the combinaison possible...
I tried to put it in charge all the night but now the problem is still here.
Any help appreciated
Click to expand...
Click to collapse
ur phone still ok but u need do manually ...
1st-take out ur battery
2nd-put it back
3rd-Put your Galaxy Note into download mode by holding down Volume Down, Center button, and Power button together for about 10 seconds.
after that press volume up , then connect ur device to odin , flash new fresh rom without pit file
Your phone seems to be totally unresponsive; that sounds like the ultimate hard brick to me.
Take it to the nearest service centre.
USB jig
Did you try putting your phone to download using USB jig ? There are many articles relating to that . Sometimes the phone may not charged when its bricked . So get it charged from somewhere else , or may be from your friend who has note and try using USB jig . It might work , no guarantee , try your luck , else be ready to spend almost half what you paid for your phone to change the motherboard !
ichson said:
ur phone still ok but u need do manually ...
1st-take out ur battery
2nd-put it back
3rd-Put your Galaxy Note into download mode by holding down Volume Down, Center button, and Power button together for about 10 seconds.
after that press volume up , then connect ur device to odin , flash new fresh rom without pit file
Click to expand...
Click to collapse
Already tried... Odin doesn't show me anything... neither adb nor windows..
chasmodo said:
Your phone seems to be totally unresponsive; that sounds like the ultimate hard brick to me.
Take it to the nearest service centre.
Click to expand...
Click to collapse
I have unbricked all my brickeds phones, I think there's always a solution for unbricking it, but if I can't I will take it to SSC
Archangel919 said:
Did you try putting your phone to download using USB jig ? There are many articles relating to that . Sometimes the phone may not charged when its bricked . So get it charged from somewhere else , or may be from your friend who has note and try using USB jig . It might work , no guarantee , try your luck , else be ready to spend almost half what you paid for your phone to change the motherboard !
Click to expand...
Click to collapse
I don't think that the problem is battery, It was 55% yesterday evening, but I haven't friend with a Gnote
I haven't a JIG but I will try to make one if I can find a 300K resistor
Can I find a 300K resistor into a old none working device ? (Like a old radio, tv, telecommand ?)
Phenom2 said:
Now my phone is unable to go in Download mode, recovery mode neither normal mode.
The screen stay black whatever I do, I've tried all the combinaison possible...
I tried to put it in charge all the night but now the problem is still here.
Any help appreciated
Click to expand...
Click to collapse
similar type of brick....and the suggestion given by the SSC is better to buy a new mobile since they have to replace the main board....(without warranty)..and cost will be around (Dhs.1150) that is almost half the price of new mobile....
btw i have tried jig also but no luck...
I have the same problem with my galaxy note.
i treid everything no reaction
pls has somebody an idea for me ?
Same problem with me.
Weird, I had a I91000 for a year, flashed everything and never had any problems. Never got close to bricking it.
I did this:
Rooted it with this method: http://forum.xda-developers.com/showthread.php?t=1501719 - OK
Ran again CWM.
I put the latest nightly from CM9. When I started flashing it, it hung. I turned off my cell (no other option, it was stuck), now it won't turn on.
Whoa... What did I do wrong? I admit I was anxious and didn't take the proper care I should've, I was very anxious, but, wow... I wasn't expecting it to be so easily brickable.
Do I have any hope left?

Does he got any chance to survive ?

Hi everybody,
After i tried to install an ICS ROM, I forgot to add the Gapps files on my SD, so on the Recovery Menu i unmount it, put the Gapps files, mount it, and then i reboot cause the phone don't recognize the SD first.
So i get my first boot loop, and discovered the Download Mod that i use with Odin3 to reset my phone to factory.
Odin failed. So now i got my phone that don't turn on at all, i try to pull out the battery, make the combinaison of the Download Mod before i put back the battery while it's USB plug on my PC... nothing work...
So i'm asking now if there's any solutions ? i see that they were hardware stuff to recover my phone but i don't know if there's anything to do first...
Thanks you to read me, and may answer me
flash a stock rom via odin.
Thanks
Thank you, but i can't access to any menu (Recovery or Download mod) :/
" make the combinaison of the Download Mod before i put back the battery while it's USB plug on my PC... " try more times .... if it doesn't work, you'll have to buy or make yourself a usb jig
Thanks
Thank you for your answer... If there's nothing left, i'm gonna try until it's work !

Categories

Resources