[Q] Hard brick galaxy s i9000 - Galaxy S I9000 Q&A, Help & Troubleshooting

I reckon it's hard brick as I experienced soft bricks before and all resolved but this time really messed up.
What I did stupidly was flashing i9000 with i9003 firmware. Odin showed it failed and download mode progress bar stopped. I turned off phone and it never woke up since then. No response to any buttons combination. No response on Odin. No response to charging. Tried plug out/in battery with 3 buttons not worked.
I ordered a USB jig but not optimistic if it can be any useful. Is Jtag repair is the only option left? I'll go HK soon and bring it over to repair if so. I'm in Sydney Australia the cost of repair is not appealing:crying:
Thanks

Try to unplug the battery 30 sec. After make the download mode combo and plug the battery without release the buttons .

Dustman317 said:
Try to unplug the battery 30 sec. After make the download mode combo and plug the battery without release the buttons .
Click to expand...
Click to collapse
Tried but didn't work. Thanks anyway. My only hope is to try with jig now:crying:

You're don't forced to buy the jig you can make it with 3 resistor of 100k
there many thread for this
http://galaxys2root.com/galaxy-s2-hacks/how-to-make-a-usb-jig-for-your-galaxy-s2/
I know that thread is for the GS2 but it works for the GS too ^^

shraky said:
Tried but didn't work. Thanks anyway. My only hope is to try with jig now:crying:
Click to expand...
Click to collapse
u gotta do usb jig method only... no other wAY..

drakester20 said:
u gotta do usb jig method only... no other wAY..
Click to expand...
Click to collapse
I've ordered it on ebay and its' on the way. Will update here if it works. Thanks

so did it work? i have exactly the same problem as you but i did'nt try the jig method.
I fthe method does work plx tell me as I am in the same desperate situation

mizzeeboy said:
so did it work? i have exactly the same problem as you but i did'nt try the jig method.
I fthe method does work plx tell me as I am in the same desperate situation
Click to expand...
Click to collapse
u shud try usb jig too bro.. i told u that in some other post ( which i dnt remember)
so plz try it.. m sure it ll work..
If my post helped, don't mind hitting THANKS

You must give a phone to Service

A Brick
Try this:
Swich off the device. Swich on the device a week later. Then use the three buttons to get in to the download mode.

ultimoricardo said:
Try this:
Swich off the device. Swich on the device a week later. Then use the three buttons to get in to the download mode.
Click to expand...
Click to collapse
It can't be turned on. No response to anything including charging. I think it's doomed.

shraky said:
It can't be turned on. No response to anything including charging. I think it's doomed.
Click to expand...
Click to collapse
Try the jig bro
If my post helped, don't mind hitting THANKS

I'm pretty sure it's bricked. You could try the following:
>Remove battery for some minutes
>Press 3 button combination while battery is still removed
>Put battery back in while 3 buttons are press (you might need some help )
MAYBE this will work, but I'm not too optimistic. sorry :/

Tried with usb jig but it doesn't work. The procedure I follow is:
Turn off phone and pull out the battery 10-15 seconds
Install battery back, but DO NOT turn it on
Plug the module into the micro-USB port to the phone
Nothing happens after, have to find jtag repair place now.

Hard brick
Hi!!
Sorry,you have hard bricked your phone,only jtag can solve it.

even my phone is hard bricked but usb jig is not working

i have a jig tag and it's not working
is there anything else to do?

Related

[Q] help briked my phone

hi... i bricked my phone(galaxy s) while i accidentally flashing another file ...my odin showed failed wen i started it...so i unplugged it from the pc...then my phone wont start up...i tried all the combinations ...but it does not help...
..can anyone help me out...?? pls
bolnees said:
hi i was installing the download mode and then i dont know what happened and now the phone boots with a picture of a phone and computer and a !
:S what can i do plz i need help
Click to expand...
Click to collapse
Do you tried removing your battery and get back to download mode?
yes and still not working as sooon as i press the power switch
th image comes up again
and i cant go to the download mode because i still didnt install it properly
bolnees said:
yes and still not working as sooon as i press the power switch
th image comes up again
Click to expand...
Click to collapse
Hmm. in this case, i think you have to buy a custom usb cable to force phone to get back in download mode. i saw ebay have those cables for cheap price or you can make a custom usb cable your self. xda have a thread how to do that
androidsl said:
Hmm. in this case, i think you have to buy a custom usb cable to force phone to get back in download mode. i saw ebay have those cables for cheap price or you can make a custom usb cable your self. xda have a thread how to do that
Click to expand...
Click to collapse
where is that ?
plzzzzzzzzz
hi,
did u try the below to get it back into download mode:
> pull the battery out and keep overnight,
> plugin the USB
> while holding volume up+down, insert the battery..
hopefully this will work (unless u've already tried this)
cheers,
bolnees said:
where is that ?
plzzzzzzzzz
Click to expand...
Click to collapse
Search for homemade factory jig.
Sent from my GT-I9000 using XDA App
http://forum.xda-developers.com/showthread.php?t=819551
jje

[Q] Bricked Cappie?

Hola fellow XDA-ers...
I have searched and can't find a solution...and seems that I might be perma bricked but some forums indicate I am now. So help!
My phone will not enter into a download mode. All I get is an exclamation mark triangle connecting a phone and a computer icon.
I have tried both volume down and both volume buttons for power and to enter into DL mode, but it just goes back to the icon screen with the exclamation point.
Any help is greatly appreciated...I was trying to flash back to stock using ODIN to update my Cognition because I got stuck not being able to update it through CMO.
You need a jig... http://goo.gl/0p52o
First: wrong forum, you should be posting in Q&A
Second: remove battery, hold volumeup+volumedown+power and insert battery. Remove your finger from the power button after you see it restart the first time. If it does not enter download mode after it starts and restarts, press the power button again. Keep your volumeup+volumedown buttons pressed during this procedure
Noone ever needs a jig. Jigs are a money making tool.
I've flashed bad kernel after bad kernel and have never once required a jig.
falabarce said:
Hola fellow XDA-ers...
I have searched and can't find a solution...and seems that I might be perma bricked but some forums indicate I am now. So help!
My phone will not enter into a download mode. All I get is an exclamation mark triangle connecting a phone and a computer icon.
I have tried both volume down and both volume buttons for power and to enter into DL mode, but it just goes back to the icon screen with the exclamation point.
Any help is greatly appreciated...I was trying to flash back to stock using ODIN to update my Cognition because I got stuck not being able to update it through CMO.
Click to expand...
Click to collapse
this happened to me too, I can't remember what i did to get into that weird state.. but your definitely not totally bricked. Have you tried using a usb from power off standpoint- Pull battery, replace.. make suer usb is plugged into computer and while holding BOTH vol up and vol down, connect usb to phone STILL holding vol buttons utill Download mode appears.
Only other suggestion i can make is to pick up one of connexion2005's jigs. 8 bucks- forces your phone into DL mode from bricked/off standpoint. I use it all the time and I have never bricked!
AdamOutler said:
Noone ever needs a jig. Jigs are a money making tool.
I've flashed bad kernel after bad kernel and have never once required a jig.
Click to expand...
Click to collapse
you need one if you have a bricked captivate.. or you can make your own.. either way the phone doesn't come back to life like magic.. a jig does that.
Coreym said:
you need one if you have a bricked captivate.. or you can make your own.. either way the phone doesn't come back to life like magic.. a jig does that.
Click to expand...
Click to collapse
True! 10 chars
AdamOutler said:
Noone ever needs a jig. Jigs are a money making tool.
I've flashed bad kernel after bad kernel and have never once required a jig.
Click to expand...
Click to collapse
Does not happen often but some times you do need it so dont misinform people mate
I back you up Coreym, 110% I bricked my phone more times than I can count (or my wife cares to hear about), and I've always been able to fix it.
I just run odin one click, pull battery, to kill boot loop, put battery back in, hold down volume buttons, and plug in usb, to get into download mode.
Once odin reads phone, click start, and it flashes default at&t kernel. Then go through odin3 reload your cwm and boom, back to flashing.
No JIG used.
Sent from my SGH-I897 using XDA Premium App
Being Bricked is the Bricks...
falabarce said:
Hola fellow XDA-ers...
I have searched and can't find a solution...and seems that I might be perma bricked but some forums indicate I am now. So help!
My phone will not enter into a download mode. All I get is an exclamation mark triangle connecting a phone and a computer icon.
I have tried both volume down and both volume buttons for power and to enter into DL mode, but it just goes back to the icon screen with the exclamation point.
Any help is greatly appreciated...I was trying to flash back to stock using ODIN to update my Cognition because I got stuck not being able to update it through CMO.
Click to expand...
Click to collapse
Hey man,
You mean update through CWM?
Anyway, not sure if you found a resolution to your issue as of yet.
If not, try this, it really couldn't hurt at this point...
Apparently you have Odin and I'm guessing you're on a PC (Windows)
I'll assume you already have a stock factory ROM and PIT file (For Your Device) - if not you need to acquire these first.
Ensure you have the correct version of Odin. Some are recommending v1.7 or v1.52 - I personally use Odin v1.82
"Pluck" or Pull the battery from the device, remove the SIM and any external storage card (if any). *I just felt like using the work "Pluck" out of the context of harp playing...
Ensure the latest Samsung Drivers are installed on the PC (assuming you're on a Windows X86 or X64) and bounce the PC (reboot) Driver cache sometimes sticks...
Plug in your USB cable to the back panel of the PC (USB v2.0 or 2.2 is preferred but USB v1.0 will work) - Plugging into a front panel (for some odd reason often finds a way to disrupt order amongst the driver pool and creates havoc within Mass Storage in the DM. (Device Manager)
Now turn your device on.. (Just kidding...)
Open Odin first - then - plug the cable into your device and withing a few seconds Odin should detect a com port: (any port is fine - 3, 5, 4, 2, etc...)
Once the com port is seen, select the correct PIT file from the PIT menu in Odin and automatically the format partition check-box will populate. (I say to re PIT the device with correct PIT (should be a 512 PIT) because it sounds as though there may be some damage to the boot loader and the respective system partition. The PIT file is supposed the restore these partitions back to factory defaults provided you select the correct PIT file.
*Note - I wouldn't recommend using the PIT file for "every" ROM flash they you do, but at times it is necessary when flashing certain ROMs.
Now select the PDA (ROM you wish to flash) from the browse menu in Odin.
Make sure the check box is selected for reboot after flash.
Let the process take place - complete the flash and wait patiently for the new image or ROM to calibrate and load. (It may take a while)
Once loaded unplug the USB cable, replace the SIM and Ext Memory card then the battery and fix whatever settings you need to (ie: ATN, efs, WiFi, WAP, etc...)
Give it a go and see what becomes of it...
HtH
Peace-
AdamOutler said:
First: wrong forum, you should be posting in Q&A
Second: remove battery, hold volumeup+volumedown+power and insert battery. Remove your finger from the power button after you see it restart the first time. If it does not enter download mode after it starts and restarts, press the power button again. Keep your volumeup+volumedown buttons pressed during this procedure
Noone ever needs a jig. Jigs are a money making tool.
I've flashed bad kernel after bad kernel and have never once required a jig.
Click to expand...
Click to collapse
Jig is useful for people who doesnt have 3 button combo fix like me
I am on same screen from last week (waiting for my jig)
your method didnt work for me..everytime phone restarts to show phone-!-computer screen...
viny2cool said:
Jig is useful for people who doesnt have 3 button combo fix like me
I am on same screen from last week (waiting for my jig)
your method didnt work for me..everytime phone restarts to show phone-!-computer screen...
Click to expand...
Click to collapse
did you try from powered off and usb plugged into computer-- holding down both vol buttons, while still holding both vol buttons plug usb into phone.. For some captivates this will work. It works with mine. Try that if you haven't already
Coreym said:
did you try from powered off and usb plugged into computer-- holding down both vol buttons, while still holding both vol buttons plug usb into phone.. For some captivates this will work. It works with mine. Try that if you haven't already
Click to expand...
Click to collapse
He has (I think I remember telling him to do the same thing a while ago). He's most likely using a Cappy that's 1010 or greater.
This is why some people need the "3 button-fix" and whatnots as well. Right now at his/their current state, only a USB Jig will work since none of the combinations work properly.
venomio said:
He has (I think I remember telling him to do the same thing a while ago). He's most likely using a Cappy that's 1010 or greater.
This is why some people need the "3 button-fix" and whatnots as well. Right now at his/their current state, only a USB Jig will work since none of the combinations work properly.
Click to expand...
Click to collapse
yeah totally.. those jigs are sweet anyway. I use it just for getting into DL mode, it's just easier and by far the quickest!
Coreym said:
did you try from powered off and usb plugged into computer-- holding down both vol buttons, while still holding both vol buttons plug usb into phone.. For some captivates this will work. It works with mine. Try that if you haven't already
Click to expand...
Click to collapse
I had 1007 phone and flashing was so fun, untill i made a mistake of using odin when my battery was low and hard bricked it....then got a refurb phone of 1008 build (current one)...did ODIn to flash and lost 3 button combo...and now i used AIO...stuck on bricked screen...tried almost everything in the forums...while i wait for my jig
No worky...
Liv33viL said:
Now turn your device on.. (Just kidding...)
Open Odin first - then - plug the cable into your device and withing a few seconds Odin should detect a com port: (any port is fine - 3, 5, 4, 2, etc...)
Click to expand...
Click to collapse
That's my problem. I can't use the three button solution to get into DL mode. I have a 1006 model.
I'm actually using Ubuntu and Windows. adb nor Odin see the device at all...it just won't drop into DL mode.
Guess I'm going to Fry's and buying a micro USB connector with all wires and making a jig.
AdamOutler said:
Noone ever needs a jig. Jigs are a money making tool.
I've flashed bad kernel after bad kernel and have never once required a jig.
Click to expand...
Click to collapse
please do not misinform people that jig is a money making tool. try this: flash a three-button disabled rom first and then unplug your usb cable while flashing ... i believe you will need a jig for sure.
you can buy one here, i believe it is cheaper & more reliable than you build one with components from Frys.
http://cgi.ebay.com/ws/eBayISAPI.dl...95025&ssPageName=STRK:MESELX:IT#ht_623wt_1139
You guys gotta quit it with the jigs. All roms... even AT&T 2.1 have 3 button.
here's a link for you to read http://forum.xda-developers.com/showthread.php?t=999302
You can fix a missing/broken rom or init. You cant fix bricked.
person1 said:
hey my phone is black and won't turn on
Click to expand...
Click to collapse
person2 said:
USE T3H J1GZ!!!11!one!****+1!!!Apostrophy!!!!
Click to expand...
Click to collapse
me said:
****SMACKS THE **** OUT OF PERSON 2****
Click to expand...
Click to collapse
or
person1 said:
Hey, I have not updated for like 2 years and I see a pc--!--phone
Click to expand...
Click to collapse
person2 said:
USE T3H J1GZ!!!11!one!****+1!!!Apostrophy!!!!
Click to expand...
Click to collapse
me said:
****SMACKS THE **** OUT OF PERSON 1****
Click to expand...
Click to collapse
AdamOutler said:
You guys gotta quit it with the jigs. All roms... even AT&T 2.1 have 3 button.
here's a link for you to read http://forum.xda-developers.com/showthread.php?t=999302
You can fix a missing/broken rom or init. You cant fix bricked.
or
Click to expand...
Click to collapse
why r u so against Jigs? they can be made in like 5 dollars man...make one yourself...I had phone with no 3 button fix..and was stuck on brick screen...Jig helped me....dont take it personally, but many times Jig can help....i agree not always but many times....
I spend around 30-50 bucks every weekend I go out to get drunk and waste my next day..8 dollars was no biggie lol
viny2cool said:
why r u so against Jigs? they can be made in like 5 dollars man...make one yourself...I had phone with no 3 button fix..and was stuck on brick screen...Jig helped me....dont take it personally, but many times Jig can help....i agree not always but many times....
I spend around 30-50 bucks every weekend I go out to get drunk and waste my next day..8 dollars was no biggie lol
Click to expand...
Click to collapse
I with you man.. they can get you out of a jam right quick. I wonder if he's tried mengbo's way to brick and gotten unbricked without a USB JIG. Because itd be interesting to know..
Sent from my SGH-I897 using XDA Premium App

[Q] Samsung Galaxy S - can't turn on

i've tried to fix the dowload mode via the link
androidadvices.com/fix-download-mode-recovery-mode-bug-in-galaxy-s
but i accidently plugged out the usb cabel out of my PC.
Now i can turn on my phone but I can't do anything,
there's just an icon that my phone isn't connected to the PC,
and when i try to connect it nothing happens.
can someone please help me???
thanks
Have you tried turning it on in recovery?
henchy said:
i've tried to fix the dowload mode via the link
androidadvices.com/fix-download-mode-recovery-mode-bug-in-galaxy-s
but i accidently plugged out the usb cabel out of my PC.
Now i can turn on my phone but I can't do anything,
there's just an icon that my phone isn't connected to the PC,
and when i try to connect it nothing happens.
can someone please help me???
thanks
Click to expand...
Click to collapse
even the recovery mode doesn't work
the icon i described just flashes while i'm holding the buttons, nothing else happens...
I'm moving your post to the Samsung fora...you might get more help over there
What model do you have?
henchy said:
even the recovery mode doesn't work
the icon i described just flashes while i'm holding the buttons, nothing else happens...
Click to expand...
Click to collapse
M_T_M said:
I'm moving your post to the Samsung fora...you might get more help over there
What model do you have?
Click to expand...
Click to collapse
Samsung Captivate Galaxy S
Is the icon you have a triangle with an android Guy and a shovel? If so try remove battery remove sim.remove SD. Insert bettery and go back into download mode and re odin..what phone also
Sent from my SGH-I897 using XDA Premium App
Is this the icon?
If the icon is the one connexion posted, then it should be fixed if you build a jig. A jig is essentially 300k worth of resistors. You can research more on this subforum to find out more information about it
connexion2005 said:
Is this the icon?
Click to expand...
Click to collapse
yes, this is the icon!!
i will try with a jig, i hope this will help!
thanks a lot!
I had that icon after a soft brick trying to install GB, and my phone was actually in download mode. I opened Odin one click, plugged it in, and was able to flash back to stock. Then I got cocky and tried to install GB again, same symbol, different results. I was not able to save my phone until my jig arrived.
Moral of the story: phone!computer can sometimes be download mode, but not always, and keep a jig on hand just in case.
Sent from my Captivate running Cognition
I had that when trying to install GB the first time as well. Have you tried putting the phone into download mode via vol down/pwr?
If that doesnt work try holding vol up/vol down and plugging in the usb cable. While doing both the above mentioned and this make sure the phone is powered off first. Perform battery pull
If you can get it into download mode, use odin to flash back to stock jf6 and then retry. Best use would be odin oneclick search for it, its somewhere in here
if key combo does not work for you, the jig will help then ... try to build one yourself, or buy it on ebay (search for "micro usb jig").

Is my Galaxy S totally bricked?

Okay guys... I was running froyo with OC lag fix,
I didnt know i had to remove OCLF before upgrading thru kies...
Started the update, it was stuck on DOWNLOADING screen(on the phone) .. at 53% for 30 mins +
I removed the battery on the phone, thinking that I have the recovery mode anyway, and now I cant get into the recovery/download mode, nothing is happening, the screen doesnt even turn on.
Is my phone 100% bricked? Is there anything else i can try? If not... If i send it to samsung can they fix it?
"Take battery out for 5 mins. Then hold the 3 button combo for DOWNLOAD mode, THEN put the battery back in, STILL holding the 3 button combo."
@azzledazzle
See the Thread below, maybe it helps you too!
http://forum.xda-developers.com/showthread.php?t=1097271
SGS_elko said:
"Take battery out for 5 mins. Then hold the 3 button combo for DOWNLOAD mode, THEN put the battery back in, STILL holding the 3 button combo."
@azzledazzle
See the Thread below, maybe it helps you too!
http://forum.xda-developers.com/showthread.php?t=1097271
Click to expand...
Click to collapse
Tried this too .. not working
It's bricked because you've messed up the bootloader.
mawardi said:
It's bricked because you've messed up the bootloader.
Click to expand...
Click to collapse
If it was at 53% progress I doubt the flashing of the bootloaders had gone wrong. Probably it was in factoryfs.rfs (if it works same way as Odin).
sometimes it takes more time to enter download mode (up to 20 sec).
Sent from my GT-I9000 using Tapatalk
Thanks for the responses guys
I tried holding the buttons for upto 1 minute, still no good :/
karan_c1990 said:
Thanks for the responses guys
I tried holding the buttons for upto 1 minute, still no good :/
Click to expand...
Click to collapse
Take the battery out for 30 min then place it back and see if you can enter Download Mode, If you can't then you have a problem.
[Ramad] said:
Take the battery out for 30 min then place it back and see if you can enter Download Mode, If you can't then you have a problem.
Click to expand...
Click to collapse
After 30 mins, should I PRESS the buttons first and then insert the battry(while keeping them pressed) OR put the battery first and then press the buttons?
UPDATE : I tried it, didn't work.
I guess all left now is to give it for repairs? :/
karan_c1990 said:
After 30 mins, should I PRESS the buttons first and then insert the battry(while keeping them pressed) OR put the battery first and then press the buttons?
UPDATE : I tried it, didn't work.
I guess all left now is to give it for repairs? :/
Click to expand...
Click to collapse
No, insert the battery then try to enter Download mode.
If it does not work then send it to be repaired or try USB-JIG: http://forum.xda-developers.com/showthread.php?t=819551 I prefer the last one, cheap and fast.
in my experience.
When the screen is black and not light, I have tried everything and never managed to arrest him. Nor I worked the jig
repair center
Does the device get seen by the pc when you plug a usb cable in?
Have you tried the 301k resistor jig ?
It seems bad. I think you'll have to go to samsung. I think you can try saying, you were doing an update from kies (froyo -> gingerbread - flashes bootloaders) and then suddenly your PC turned off (power failure) . It seems that the phone can boot from USB too, so samsung can repair it without even opening it. Here on xda, there is a thread, where some guys (much more clever than me ) are trying to figure out the protocol.
Sorry for my English
dan542 said:
It seems bad. I think you'll have to go to samsung. I think you can try saying, you were doing an update from kies (froyo -> gingerbread - flashes bootloaders) and then suddenly your PC turned off (power failure) . It seems that the phone can boot from USB too, so samsung can repair it without even opening it. Here on xda, there is a thread, where some guys (much more clever than me ) are trying to figure out the protocol.
Sorry for my English
Click to expand...
Click to collapse
I recently got my wife's sgs out of a simalar situation by using ADB. And the command of "adb reboot download" if you search xda you can find a ton of info and download links for adb
Sent from my GT-I9000 using XDA Premium App
Once I saw someone that had to pull out the battery for several hours.
Maybe do that over night and then try the download mode again in the morning.
Good luck
bristolian said:
I recently got my wife's sgs out of a simalar situation by using ADB. And the command of "adb reboot download" if you search xda you can find a ton of info and download links for adb
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
He can't get to the system nor to the recovery (most likely messed bootloaders), so he can't use adb.
riff jtag can recover bootloaders' but a technition has to do it
oh yes and it cost $$$

My Galaxy SI, DOESN'T turn on.

Hello Guys,
I was flashing my SI, two weeks ago and it got frozen, so I had to take my battery out. After that, my phone doesn't turn on, I've tried everything, even USB jig. But It's dead still.
I also tried the USB jig into my Galaxy SII and into my friend's Galaxy SI, It worked perfectly. (just to make sure that the problem is in my phone)
Is there something else that I could try to do?
Thank you, Lucas.
does your phone boots into download mode or recovery??
Sent from my GT-I9001 using XDA
Can u get into download mode with 3 button combo.
Press volume down home button and on simultaneously.release all 3 after 3 sec.
Screen says
Download do not turn of target
Post if this appears.then I guide u how to flash a rom with odin
abhi.a3s said:
does your phone boots into download mode or recovery??
Sent from my GT-I9001 using XDA
Click to expand...
Click to collapse
No, It doesn't boot into download mode. That's why I bought an USB jig and even using an usb jig it does not boot into download mode.
Thank you.
zodiaxe66 said:
Can u get into download mode with 3 button combo.
Press volume down home button and on simultaneously.release all 3 after 3 sec.
Screen says
Download do not turn of target
Post if this appears.then I guide u how to flash a rom with odin
Click to expand...
Click to collapse
I've tried put into download mode, so many times and didn't work. That's why I bought an USB jig, even plugging the usb jig it doesn't boot into download mode :/
I have done flashing into my Galaxy SII and twice into my galaxy SI. But, the last time, which was the third time, I did something wrong. (By the way, I was flashing to official room)
Try removing the battery, press the 3 button combo and put the battery back in while you're holding the buttons (you will need some help I guess). Try the same with the JIG.
Edit/ What exactly went wrong?
Okay, I'll try. Tell you if it worked later. Need get some charge.
Thanks a lot.
I've tried and it didn't work.
Thanks for your help.
Sent from my GT-I9100 using XDA
Your welcome!
Did you update the bootloader while flashing? Actually it's really hard to brick an SGS completely... Do you remember what exactly you did when you flashed the phone?
The last chance would be JTAG (http://www.youtube.com/watch?v=T7edUXE7jLg).
Regards!
What happens when u try to recharge. Does the battery icon show?
try to recharge the phone for an hour.then pull the battery, leave it out for an hour. Put it back and try download mode. Last chance, before jtag,i think
Well, while I was flashing with odin I probably used an incorrect room and it got frozen. I don't know why I took the battery out.. I could just wait and put it to flash again.
Anyway I watched the video and I gave up. I don't have those stuffs and I won't spend money with a £120 phone.
Thanks once more. I'm really thankful.
Nope, whatever I do my phone doesn't show anything. I did charge my battery for few hours and the phone got hot (normally, as all phones does while charging) and I tried put into download mode and didn't work.
Thank you, Lucas.
may be..there is only one way..giving ur fone in samsung..
obviously u will have to lose few bucks from ur pocket..
Sent from my GT-I9001 using XDA

Categories

Resources