Related
Hi,
I as of yet, am not going close to any ICS build till the issue gets solved by someone.
so I am experimenting with different gb roms. i was using checkrom v6 but didnt like it, so followed steps to install darkyrom/alliancerom extreme edition. i followed the steps as I was told to install allianceota and flash the rom through there. it didnt work. so instead using cmw i flashed through recovery, it did flash but there no root.
so now, i reflashed a stock la6 rooted rom from here; http://forum.xda-developers.com/showthread.php?t=1535025
this went smoothly with no problems, so i installed allianceota as normal, this time when i try to flash the following messages come up:
Installing Multi-CSC
Can't access to '/system/CSC/KOR/system/'
Successfully applied multi CSC"
and then it gives me the option to reboot, wipe cache and a few other options, not full recovery mode.
shall i just reflash the rom through recovery, or am I doing something wrong? and does the slight error above mean I have a problem with my note?
cheers in advance.
Let me just say that almost every ICS ROM out there now has disabled the MMC_CAP_ERASE code in the kernel that activates the eMMc bug and bricks your phone. If you want stock ICS, you can use SpeedMod or Franco kernels. If you want AOKP, there is that now. If you want CM9, there's a bunch of variations plus the official CM9 nightly. If you read through the OP and stickies, you will be okay.
Are you on stock recovery still? It sounds like it from the error you are getting. Try flashing CWM recovery and installing the GB rom with that. Follow Drketan's thread in Android Development.
hmmm, so would you advise me to use ics? is it much better? i dont want to use cm9 builds as i need the spen apps and so on. i have looked into kingdroid or alba.
I'll have to think hard about this. i may give it a shot soon though..
oh and btw, I fixed the problem, yep it was to do with cwm it wasn't installed with the stock rooted rom. as for allianceota, it still didnt flash the rom, i had to flash the rom through cwm manually.
cheers anyhow.
salespalace said:
hmmm, so would you advise me to use ics? is it much better? i dont want to use cm9 builds as i need the spen apps and so on. i have looked into kingdroid or alba.
I'll have to think hard about this. i may give it a shot soon though..
oh and btw, I fixed the problem, yep it was to do with cwm it wasn't installed with the stock rooted rom. as for allianceota, it still didnt flash the rom, i had to flash the rom through cwm manually.
cheers anyhow.
Click to expand...
Click to collapse
I love ICS a lot more than GB. If you want to use stock ICS, I would just use Franco or Speedmod kernels with it and be safe. Read both of their forums and decide what you want to do.
I had the same problem with rom deodex i had flash with odin 1.85 firmware gingerbread here ; http://www.hotfile.com/dl/152168378/f76281c/N7000XXLC1_N7000OXXLB3_ATO.zip.html... then i made wipe cache and cache dalvick .
I've just flashed AlBa repack latest one on xxlq2, I did it by following the steps,
I thought i had broken my phone, because when the flashing finished and i was rebooting, at the beginning when it welcome to galaxy note n7000 and then goes to the bootup video, it restarted that several times, then after like a few minutes it loaded the homescreen and startup.
salespalace said:
I've just flashed AlBa repack latest one on xxlq2, I did it by following the steps,
I thought i had broken my phone, because when the flashing finished and i was rebooting, at the beginning when it welcome to galaxy note n7000 and then goes to the bootup video, it restarted that several times, then after like a few minutes it loaded the homescreen and startup.
Click to expand...
Click to collapse
-Flash a stock GB rom with pc odin
-Root it
-Go to cwm and wipe all (factory reset,cache and dalvik and then Install the ics rom that you like
-Reboot system and now it should work
Sent from my GT-N7000 using Tapatalk 2
Hello,
I'm new at flashing but I recently bought a Samsung Galaxy Note, which already had Stock ICS on it.
Android Version: 4.0.3
Baseband: N7000XXLPT
Kernel: 3.0.15-N7000XXLPY-CL474507
Got brickbug confirmed that I am running a dangerous eMMC chip firmware. I bought this Note from eBay and I'm guessing the previous owner did a reset. It is still working and I had no trouble with it, so I guess I got lucky.
Since I would like to return to a safer kernel and install Paranoid Android I read myself into some threads but would like someone to review what I've gatherd:
Flash save kernel for ICS, for example speedmod kernel with PC Odin.
Device should reboot into ICS with new kernel.
Flash Gingerbread stock ROM for my country (germany) for example this one:
N7000XXKJ4 ------ 2.3.5 2011 october-------- N7000OXAKJ4 ------------------Germany (Debitel)
Device should restart wirh Gingerbread and an old Gingerbread kernel(?)
Root and install CWM using Dr. Ketans guide and batch file.
Follow instructions to install Paranoid Android v0.4 from CWM
I have some questions for this as well:
Speedmod kernel flashes CWM with it. Does that mean it flashes the kernel and the recovery partion, too? As I understood, the CWM works from inside the initramfs, which I thought got flashed with the kernel on the /system partion (or maybe the /boot partion) but not on the /recovery.
Does CWM disapear, when I flash another ROM?
I am pretty sure, that I am running a free (= open) Version of ICS on the phone. When I install a Stock Gingerbread ROM with a Carrier afterwards (like above the Debitel company), do I have to expect weired stuff?
I am running Win 7 64bit, and I would run Odin v1.85 with admin rights. Kies ist installed. Odin found the device, too.
Thanks in advance,
gador
Speedmod Kernel will install Kernel, CWM and Root - And is flashable via odin or mobile odin.
CWM will disappear if you flash a stock ROM via ODIN, If you flash a custom ROM through CWM you will keep CWM (may change depending on kernel from the ROM)
If you flash a branded ROM via odin, You will probably get a lot of carrier branded bloatware on the device, But if you are sim unlocked, you wont get any weird issues like network unlock codes and so on.
azzledazzle said:
Speedmod Kernel will install Kernel, CWM and Root - And is flashable via odin or mobile odin.
CWM will disappear if you flash a stock ROM via ODIN, If you flash a custom ROM through CWM you will keep CWM (may change depending on kernel from the ROM)
If you flash a branded ROM via odin, You will probably get a lot of carrier branded bloatware on the device, But if you are sim unlocked, you wont get any weird issues like network unlock codes and so on.
Click to expand...
Click to collapse
So I guess, I can go ahead and they're no fatal flaws in my procedure?
(And flashing stock ROMS overrides /recovery as well?)
Check the videos in ky sig once
Just to be safe
Erm, All ROMs are different so double check in the OP but you wont lose CWM if you switch between custom ROMs, Only a full firmware flash via ODIN will replace recovery. However there are many variations of CWM, All however do the same job
the instructions above are correct, But seem to be a more complicated way of doing it, It says to flash a safe ICS kernel, THEN flash GB ROM in ODIN ??? That makes no sense.
Anyway, What i would do is, Revert to GB via ODIN, Flash SpeedMod kernel (for GB not ICS), Load all the files on to your SD card, Boot into recovery, Do a full wipe, Along with cache and dalvik cache, Then install PA + Gapps + any other mods !
azzledazzle said:
Anyway, What i would do is, Revert to GB via ODIN, Flash SpeedMod kernel (for GB not ICS), Load all the files on to your SD card, Boot into recovery, Do a full wipe, Along with cache and dalvik cache, Then install PA + Gapps + any other mods !
Click to expand...
Click to collapse
would it then be necessary at all to install the SpeedMod kernel? I included it above to make sure, the kernel is safe, but when the Gingerbread Stock ROM overrides the kernel, do I have to flash the kernel afterwards?
I suggest you stay stock and dont do any factory reset or data wipe.
Then READ and read a LOT of the topics here.
All these suggestions of flashing this and that comes with a risk. And it does not mean that if it works for others will work the same way for you.
Sent from my GT-N7000 using xda app-developers app
Yes, thats why i thought the above steps where a bit confusing lol
Flash SpeedMod (or any other GB kernel for that matter) After flashing GB via ODIN
azzledazzle said:
Yes, thats why i thought the above steps where a bit confusing lol
Flash SpeedMod (or any other GB kernel for that matter) After flashing GB via ODIN
Click to expand...
Click to collapse
Does one need root before you are able to flash GB via PC Odin?
Sent from my GT-N7000 using Tapatalk 2
mrcarlxx said:
Does one need root before you are able to flash GB via PC Odin?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I'd say no. I mean, as I understand it, you're flashing the device in download mode. There is no need for a root user.
So, against my inner "good angel", who told me to wait for a new official firmware release, I went ahead and flashed away.
It all worked and here is what I did:
Flashed the Gingerbread Stock firmware from above with PC Odin, according to the guide in the second post of the Stock Firmware thread.
Restarted and got lots of force close issues.
Flashed the Gingerbread Kernel SpeedMod from here ("speedmod-kernel-n7000-k2-12-Odin.tar")
Rebooted, continued to have force close issues.
Rebooted into Recovery (which is now CWM, due to Kernel update)
Wiped cache, dalvik cache and did a factory reset
Rebooted into a fully working Gingerbread OS
Placed PA v0.4 and GApps onto my SD Card (from here)
Rebooted into CWM Recovery
Applied PA v0.4 from SD-Card
Applied GApps from SD-Card
Wiped Dalvik Cache, Cache and did a factory reset
Rebooted into a workind Paranoid Android OS.
Although the SpeedMod Kernel got overridden by PA, I still have CWM Recovery.
Did you root first? and did you get the yellow triangle through flashing with PC Odin?
PS
I'm still dead scared about flashing a ROM after messing up my last gnote, never ever had a problem with my desire...it's shook my confidence tbh :-(
mrcarlxx said:
Did you root first? and did you get the yellow triangle through flashing with PC Odin?
PS
I'm still dead scared about flashing a ROM after messing up my last gnote, never ever had a problem with my desire...it's shook my confidence tbh :-(
Click to expand...
Click to collapse
Well, the SpeedMod Kernel not only gave me CWM, but also root. According to PA Thread Install instructions, you would need to root your device prior to installing PA.
Yes, after flashing the SpeedMod Kernel, I got the yellow triangle, but since I bought this phone on eBay, without any bill to confirm warranty, I didn't really care about it.
I did not get a yellow triangle after flashing the official Stock ROM!
So I would hazzard to guess that this would not void warrany. (Also, in Download Mode, there was the little text saying: "Custom Binary: No" after flashing the Stock Gingerbread ROM)
So, if I were concerned about warrany, I would have a second look at Dr. Ketans guide, which describes the CWM+Root procedure without increasing the binary counter (at least I think so).
This way, you could get root and CWM after flashing to Stock Gingerbread.
I just had the problem, that Gingerbread wouldn't allow me to go into the Settings Tab to activate Debbuging, which you will need for Dr. Ketans method. (All processes were getting force closed)
If it is possible to wipe the caches and factory reset the phone with stock recovery, I think it would work. It should look like this then:
Flashed the Gingerbread Stock firmware from above with PC Odin, according to the guide in the second post of the Stock Firmware thread.
Restart to Recovery. Wipe Dalvik Cache, Cache and do a factory reset (You just flashed Gingerbread Stock, which should have given you a safer kernel)
Restart
Activate USB Debugging and untrusted sources.
Follow Dr. Ketans Guide on how to Root+ get CWM
Continue from step 8 above.
Since I consider myself a complete noob to the flashing business, someone should propably confirm, what I've just written. I wanted to be on the safe side and therefore flashed a known safe kernel again over Gingerbread, just to be sure (and to get root+CWM)
Hope that helped.
Well mine didn't :-(
I'm now cursing after my planned upgrade failed :-( I'm stuck at the yellow triangle boot screen wondering what to do
My sequence was
a) Unpack SGN, and it upgraded to ICS
b) read about all the dire warnings on ICS - and curse!
c) figure out how to flash speedmod and get root via the temp CWM - and I was pretty happy about this for a few days..
d) battery life seemed poor - so I wondered if the Abyss kernel would help
e) Went into Recovery - which appeared to be CWM (volume & on/off to navigate) and flashed the Abyss kernel and performed a wipe (assured that my SGN was safe with speedmod)
f) Now stuck at the yellow triangle boot screen - wondering what to do?
My recovery seems to be the touch screen version now - when I can get into it.
Suggestions please?
(My old nexus One wasn't this tricky!)
---------- Post added at 10:25 PM ---------- Previous post was at 10:02 PM ----------
Wll I reflashed speedmod with Odin - and at least it looks like its booting!... anxious minutes later.... well I/m back. I don't know what i did wrong - but |I don't want to repeat that in a hurry.
I'll wait for CM9 to come out with an approved kernel before messing further!
Before I begin, yes... I did search and look through a few threads with similar titles but did not find my problem.
I am not a phone geek and I am new to all this, but I rooted my Note along with a "Franco kernel", which worked successfully. My phone booted up as it was before (in fact I noticed absolutely no difference in my phone, whatsoever).
The problems begun when I tried to install an "Abyss" kernel via CWM, which apparently installed successfully, but the phone would never get past boot-up (not so successful after all, huh?). I realized that it wasn't going to work, so I though no problem, and went back into CWM and re-installed the Franco kernel that I was using before (which worked). Strangely, this kernel, too, would now no longer boot.
I successfully restored the phone with a GB rom via odin (teriible rom), and proceeded to install the so-called "Hydracore" kernel (love the names) via cwm.... this kernel made things even worse. Once again the installation was supposedly "successful", but the phone doesn't go past boot. This time, it gets stuck on a very dim black screen, which isn't actually black, it is a dark creamy/pink hue that you can only notice in absolute darkness. (WTF?) This screen has random black blotches on it, but again, if you are in a lit up room the screen looks completely black and you cannot tell that it is actually lit. When I say that this kernel made the problems even worse, I say that because when this happens (dim black screen), I cannot even enter CWM recovery at all to try and install a different kernel. From here, I can only access download mode, and have no choice but to restore the phone with the GB rom via odin. I did so, and proceeded to install the latest version of "Hydracore" (v5.4) posted right here on XDA by the member 'chasmodo.' This time, I did the installation of the kernel via odin, which, once again, was supposedly successful... and once again a lie, as the phone just goes into the same black screen, with no option other than download mode.
The sole reason I have wasted hours of my life researching and understanding mobile phone terminology in the past few days is so that I can have jellybean on my Note. It seems that I am unable to do this because the Kernels are not working on my device. I have a very powerful and capable phone, which is currently stuck on this GB rom (which I think has to be the most terrible piece of coding ever made) so any help on this would be immensely appreciated.
Thanks in advance.
can you try go back to stock GB rom.. then upgrade to ICS and root using Dr Ketans method and then install Hydracore
You flashed Hydracore on GB rom? that's the main reason behind your problem, this Kernel is not for GB. Now either flash custom GB kernel or flash stock GB firmware using pc odin and then root it. Check post # 2 in this thread for rooting. (I guess you know how to do this )
Once you have root and cwm recovery, you can flash any custom rom you want.
jeetu1981 said:
You flashed Hydracore on GB rom? that's the main reason behind your problem, this Kernel is not for GB. Now either flash custom GB kernel or flash stock GB firmware using pc odin and then root it. Check post # 2 in this thread for rooting. (I guess you know how to do this )
Once you have root and cwm recovery, you can flash any custom rom you want.
Click to expand...
Click to collapse
Hot damn you guys are quick!
Silly me! :silly:
If I install any GB kernal can I then install CM10?
S-pen said:
Before I begin, yes... I did search and look through a few threads with similar titles but did not find my problem.
I am not a phone geek and I am new to all this, but I rooted my Note along with a "Franco kernel", which worked successfully. My phone booted up as it was before (in fact I noticed absolutely no difference in my phone, whatsoever).
The problems begun when I tried to install an "Abyss" kernel via CWM, which apparently installed successfully, but the phone would never get past boot-up (not so successful after all, huh?). I realized that it wasn't going to work, so I though no problem, and went back into CWM and re-installed the Franco kernel that I was using before (which worked). Strangely, this kernel, too, would now no longer boot.
I successfully restored the phone with a GB rom via odin (teriible rom), and proceeded to install the so-called "Hydracore" kernel (love the names) via cwm.... this kernel made things even worse. Once again the installation was supposedly "successful", but the phone doesn't go past boot. This time, it gets stuck on a very dim black screen, which isn't actually black, it is a dark creamy/pink hue that you can only notice in absolute darkness. (WTF?) This screen has random black blotches on it, but again, if you are in a lit up room the screen looks completely black and you cannot tell that it is actually lit. When I say that this kernel made the problems even worse, I say that because when this happens (dim black screen), I cannot even enter CWM recovery at all to try and install a different kernel. From here, I can only access download mode, and have no choice but to restore the phone with the GB rom via odin. I did so, and proceeded to install the latest version of "Hydracore" (v5.4) posted right here on XDA by the member 'chasmodo.' This time, I did the installation of the kernel via odin, which, once again, was supposedly successful... and once again a lie, as the phone just goes into the same black screen, with no option other than download mode.
The sole reason I have wasted hours of my life researching and understanding mobile phone terminology in the past few days is so that I can have jellybean on my Note. It seems that I am unable to do this because the Kernels are not working on my device. I have a very powerful and capable phone, which is currently stuck on this GB rom (which I think has to be the most terrible piece of coding ever made) so any help on this would be immensely appreciated.
Thanks in advance.
Click to expand...
Click to collapse
Hi there, sorry to hear of your challenges.
One thing to remember before flashing is the nature of safe / unsafe kernels. Equally as important is compatible / non compatible kernels. It's not clear from your post but did you flash Abyss on an ICS ROM? If so, Abyss is a GB kernel. It will install but the ROM wont run due to lack of compatibility.
Abyss is used by many as a Safe kernel, a base to flash a new ROM from . Alternatively, it can be used to "downgrade" to Gingerbread ROMs.
If you are intent on trying a JB ROM, I would suggest a doing a full wipe (use the numerous guides on XDA) and a kernel clean (jBroid Script Cleaner for example). Now, research Chasmodo's excellent Kernel Repository and choose a kernel. Hydracore 4.3 Standard is a good "benchmark" however you could try the Official CM10 kernel from Entropy. Reboot to Recovery and flash your JB ROM of choice.
You will now have "Full Wiped" (including Script Clean), installed a Safe (Compatible) Kernel and flashed a compatible ROM.
For what its worth, I found GB to be an excellent ROM, particularly 2.3.6 and 2.3.7. CheckROM was one of my favorite ROMs on the S2 and they didnt even feel the need (till recently) to make an ICS version.
I hope this helps. Please hit THANKS if it did.
Alba Donzo said:
Hi there, sorry to hear of your challenges.
One thing to remember before flashing is the nature of safe / unsafe kernels. Equally as important is compatible / non compatible kernels. It's not clear from your post but did you flash Abyss on an ICS ROM? If so, Abyss is a GB kernel. It will install but the ROM wont run due to lack of compatibility.
Abyss is used by many as a Safe kernel, a base to flash a new ROM from . Alternatively, it can be used to "downgrade" to Gingerbread ROMs.
If you are intent on trying a JB ROM, I would suggest a doing a full wipe (use the numerous guides on XDA) and a kernel clean (jBroid Script Cleaner for example). Now, research Chasmodo's excellent Kernel Repository and choose a kernel. Hydracore 4.3 Standard is a good "benchmark" however you could try the Official CM10 kernel from Entropy. Reboot to Recovery and flash your JB ROM of choice.
You will now have "Full Wiped" (including Script Clean), installed a Safe (Compatible) Kernel and flashed a compatible ROM.
For what its worth, I found GB to be an excellent ROM, particularly 2.3.6 and 2.3.7. CheckROM was one of my favorite ROMs on the S2 and they didnt even feel the need (till recently) to make an ICS version.
I hope this helps. Please hit THANKS if it did.
Click to expand...
Click to collapse
Yes, I forgot to mention that when I rooted it I was running official 4.0.3 which I got OTA. After I rooted I tried the Abyss kernel. I had read that if you try and install CM10 straight from ICS you can brick, and that you had to downgrade to GB to do this. There must have been a misunderstanding on my part as I though that installing Abyss would downgrade me to GB.
What I don't understand is that I have now installed a GB rom, yet the Abyss gb kernel still does not work.
The two members that posted mentioned that I should root, though I did mention in the OP that it is already rooted... Am I missing something?
Anyway, I want to avoid having to download any more big files. I already have the latest "nightly" build of CM10 in my SD card. Is there any GB kernel that I can install from where I am now that would make it safe to install the CM10 zip?
S-pen said:
Yes, I forgot to mention that when I rooted it I was running official 4.0.3 which I got OTA. After I rooted I tried the Abyss kernel. I had read that if you try and install CM10 straight from ICS you can brick, and that you had to downgrade to GB to do this. There must have been a misunderstanding on my part as I though that installing Abyss would downgrade me to GB.
What I don't understand is that I have now installed a GB rom, yet the Abyss gb kernel still does not work.
The two members that posted mentioned that I should root, though I did mention in the OP that it is already rooted... Am I missing something?
Anyway, I want to avoid having to download any more big files. I already have the latest "nightly" build of CM10 in my SD card. Is there any GB kernel that I can install from where I am now that would make it safe to install the CM10 zip?
Click to expand...
Click to collapse
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.
Alba Donzo said:
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.
Click to expand...
Click to collapse
So the official CM10 kernel is a gb kernel? Because remember that is what I'm currently on.
And just to make sure I got you... wipe everything, install kernel (I don't understand what you mean by "go straight to rom flash"), but then not "reboot system", instead "reboot to recovery", then install CM10 rom?
Also, when you say a "full wipe" do you mean that it will erase everything like a factory reset and delete all my apps and everything else? And is there anyway to install CM10 without doing this or is that the only way?
Cm10 kernel is a jelly bean kernel, so gb rom will not run under it.
Full wipe does mean erasing everything. Coming from gb, there is no other way to install, you need a full wipe, remember, you're updating two full revisions of the os, so it's not surprising a full wipe is needed. If you're worried about your apps, root gb before upgrading and use titanium backup to backup you're apps and then restore them when on cm10.
Sent from my GT-N7000 using xda premium
Alba Donzo said:
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.
Click to expand...
Click to collapse
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Nothing else is needed, no intermediate steps like flashing another kernel in between, and especially no running Jbroid or Sybr kernel cleaning script.
chasmodo said:
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Click to expand...
Click to collapse
How original was that....
Sent from my GT-N7000 using xda premium
SpyderTracks said:
If you're worried about your apps, root gb before upgrading and use titanium backup to backup you're apps and then restore them when on cm10.
Click to expand...
Click to collapse
Once again, my phone is already rooted... I have mentioned this several times.
chasmodo said:
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Nothing else is needed, no intermediate steps like flashing another kernel in between, and especially no running Jbroid or Sybr kernel cleaning script.
Click to expand...
Click to collapse
You telling me that I can safely go straight to JB from my current GB rom and kernel?
I already have a "nightly" JB rom on my SD card, so just to be clear, all I do is go into CWM recovery, do a "full" wipe (how do I do that by the way?) and install the JB rom from zip?
Yes, you can go ahead. Just follow the instructions kindly provided by chasmodo.
But please, do not forget to flash GApps after you flashed the JB "nightly ROM which is on your SD Card". Otherwise you won't have Google account, play store etc yada yada.
Full wipe (aka full-wife™) means wipe data/factory reset. Nothing else.
AA1973 said:
Yes, you can go ahead. Just follow the instructions kindly provided by chasmodo.
But please, do not forget to flash GApps after you flashed the JB "nightly ROM which is on your SD Card". Otherwise you won't have Google account, play store etc yada yada.
Full wipe (aka full-wife™) means wipe data/factory reset. Nothing else.
Click to expand...
Click to collapse
Great! I am downloading the GApps for JB now. How do I install them? I understand that this is also done through CWM recovery, but how do I instal them? do I install the JB rom and reboot to recovery and then just install GApps from zip before rebooting system?
Also, does the full wipe have to be done in CWM recovery, or can I just do the normal wipe on the phone menu before entering recovery?
You flash the ROM by pointing the recovery to the "ROM.zip", the same is valid for "GApps.zip".
So you do the following, no reboot in recovery in between those 2 steps!
Install zip (from where it is located, internal/external SD )
*ROM.zip
*Gapps.zip
*reboot system
Wipe data/factory reset is done (most of the times) in recovery. Just get used to it. Saves you some bad habits on doing it on stock ICS ...
AA1973 said:
You flash the ROM by pointing the recovery to the "ROM.zip", the same is valid for "GApps.zip".
So you do the following, no reboot in recovery in between those 2 steps!
Install zip (from where it is located, internal/external SD )
*ROM.zip
*Gapps.zip
*reboot system
Wipe data/factory reset is done (most of the times) in recovery. Just get used to it. Saves you some bad habits on doing it on stock ICS ...
Click to expand...
Click to collapse
OK install ROM and then install GApps straight away, got it.
Just about the wipe, is it a simple one button wipe that wipes everything, or are there several things that I have to wipe independently? This is the part I'm not too sure about.
Just go into recovery and have a look. I mean, a really close look! Your topic was "need help to install a kernel" not "I don't know how to use recovery and please can someone come over to my place in order to explain me CWM recovery".
Sorry. Everything has been explained. Can't (or rather dont want to) help you further than what has been already mentioned. Period.
AA1973 said:
Just go into recovery and have a look. I mean, a really close look! Your topic was "need help to install a kernel" not "I don't know how to use recovery and please can someone come over to my place in order to explain me CWM recovery".
Sorry. Everything has been explained. Can't (or rather dont want to) help you further than what has been already mentioned. Period.
Click to expand...
Click to collapse
That's fine. I'll go into recovery and have a look. Thanks for the help that you did give anyway.
It worked! I have been messing around with my new Note on Jellybean and looking through all the settings. It doesn't have project butter (or at least the project wasn't very successful), but still miles ahead of Touchwiz.
Just want to extend a big thanks to everyone that has helped me out. Much appreciated.
Ok so i have had my international now for about 6 mos. I got so sick and tired of not getting an ota that i decided to take matters into my own hands.
My version was N7000UBKK2 which has never received an update for some reason. should have stuck with my 717 now that Im thinking about it. Anyways went ahead and flashed the CF Root kernel and was successful. had root and cwm. Wasnt good enough though. called myself gonna flash the new hydracore as it said it was safe with all custom roms. So this is what i did: Downloaded Mobile ODIN and then copied hydracore from pc to the phone root file in sd. pulled up file on mobile odin and tried to flash. That is when my phone went into a soft brick state. will boot into cwm recovery and download mode but thats it. Tried doing a full wipe and then installing older GB stock rom from brick help forum. No luck. pc odin says something about com.port not found. PLEASE HELP ME WITH THIS FIX THE SOFT BRICK GUIDE IS NOT WORKING I WILL COMPENSATE FOR A NON DAMAGING FIX THAT WILL GET ME UP AND RUNNING AGAIN. WONT BE A WHOLE LOT AS I HAVE 5 KIDS AND ITS CHRISTMAS BUT I WILL DO MY BEST TO DONATE. GONNA BUST OUT MY ATRIX AND WAIT FOR REPLYS OR P.M S. THANKS IN ADVANCE!!! MODERATELY EXPERIENCED USER.
first of all, hydracore kernel dont work with GB roms which you have, that is why your rom didnt bootup
for pc odin, maybe you dont have properly installed drivers on your pc, so first find a drivers for GT N7000, you can try here (you have all informations how to flash stock rom, also you have driver to download, roms and other stuff, thanks to dr.ketan):
http://forum.xda-developers.com/showthread.php?t=1424997
if you maybe tried this steps and it didnt work, you can try these steps:
1.if you have that cf root kernel on your sd card(phone), you can flash it through recovery, then just reboot you device, and you will be fine.
2.If you have it on pc, you can go to recovery> mount and storage> connect your phone with pc, choose mount usb storage, and you will have acces to your phone, copy it, then choose unmount (first unmount it from pc then from phone) disconect usb cable, and you are ready to flash it from recovery
3.If you dont have it on your pc or phone... then you can try flash a custom rom for example some of new JB leaks:
download philz xxlsc kernel from: http://www.mediafire.com/?o569vuu36u96g3n , this kernel is for new JB xxlsc leaks.
Now you can choose one of roms from Android developement thread which suits your needs, search for xxlsc roms, there are plenty of good roms...
4.when you downwload philz kernel, and your favorite rom, follow the steps from 2. mounts and storage>mount usb storage>copy your rom and kernel to your phone
5.first flash philz xxlsc kernel, when it finish, go to advance and reboot to recovery
6.now you are in new recovery, do all wipes, wipe cache, wipe dalvik cache, then wipe data/factory reset. Now you are ready to flash the rom, choose install zip> install from (internal or external sd card, depend on where you copy your rom), when it finish you are done, reboot your phone, enjoy
If it work for you, I will be happy if you buy Christmas gifts for your kids, no need to donate
Good luck! :good:
p.s. be patient, maybe someone came with better idea...
hopefully it was not v7. If you flashed V7, then you will need to flash another zip called returning back to hydra5.3b.zip followed by a GB kernel from recovery. try and kepp us posted
nokiamodeln91 said:
hopefully it was not v7. If you flashed V7, then you will need to flash another zip called returning back to hydra5.3b.zip followed by a GB kernel from recovery. try and kepp us posted
Click to expand...
Click to collapse
yes, forgot that, here is link for reverting from HC V7 to HC 5,3
http://forum.xda-developers.com/showpost.php?p=32806581&postcount=10783
hmmm.. considering this http://forum.xda-developers.com/showthread.php?t=2053703
he might have already got out of it
Yes I did in fact flash V7. Still working on the device. Gonna try the methods now. THX
Thanks for your help and suggestions. I did in fact do as you recommended and everything is working fine. I flashed both the kernel and one of the jb roms you had recommended. Now I am up and running without a hitch. Seems to be a pretty smooth rom as well. Flashed the new ultimate rom that was listed.
Jacknovercasher said:
Thanks for your help and suggestions. I did in fact do as you recommended and everything is working fine. I flashed both the kernel and one of the jb roms you had recommended. Now I am up and running without a hitch. Seems to be a pretty smooth rom as well. Flashed the new ultimate rom that was listed.
Click to expand...
Click to collapse
I'm glad it helped :good:
Now its Jelly Bean time for kids, make them happy, go and buy presents for Christmas
So, this is what happened. I first upgraded to the latest official JB 4.1.2 XXLSA firmware. I noticed that it still wasn't as fast as I'd like, and wanted to try a custom ROM instead. I read through the guides in here and get that I have to downgrade to a GB ROM first in order for me not to hardbrick my phone. So, I download "N7000XBKK4 ------ 2.3.6 2011 November------- N7000OXXKK5--------------------- Nordic countries" from that list over stock ROM's in the Q&A root guide here: http://forum.xda-developers.com/showthread.php?t=1424997 . I follow the flashing guide to the letter, puts my phone in download mode, runs the flash via Odin, the phone restarts, and everything goes south. Basically this happens: When I start my phone it get's to the point in the GB initial startup where I'm to touch the Android to start, but then all it does is throw messages at me about this service and that service having stopped responding, untill the phone reboots. So now I have reflashed back to the JB ROM.
So basically, what am I doing wrong, and what can I do to make a proper downgrade so I can get rooted, install CWM and get down and get it on with some custom ROM's?
Thx in advance!
Same happened with me. I flashed GB and was getting force close messages. But not a big problem. Just flash GB rom again. And after flashing just delete all user data from recovery and reboot. U wont get those messages any more.
Sent from my GT-N7000 using XDA Premium HD app
You always need to WIPE data / factory reset after downgrading from JB .. GB is safe to go ahead.. if you choose ICS then first flash a safe kernel and then do wipe
It seems to me that KK5 is non wipe, which explains why you got those messages. The rest is detailed in nokiamodeln91's message BTW, JB is still not official for our Notes. What you installed was a leak with a safe kernel (if it was Philz).
nokiamodeln91 said:
You always need to WIPE data / factory reset after downgrading from JB .. GB is safe to go ahead.. if you choose ICS then first flash a safe kernel and then do wipe
Click to expand...
Click to collapse
Stock GB kernel its safe and Stock ICS Unsafe?
Yiannis75 said:
Stock GB kernel its safe and Stock ICS Unsafe?
Click to expand...
Click to collapse
Exactly.
I had this issue too when downgrading to GB. Wipe Cache and Dalvik and you should be ok from then on.
Wow. A lot of replies in just a single day. You guys are awesome
Now you say that the KK5 is non-wipe. Are there any GB-roms which are wipe, so to speak? Or do I have to do the flash to GB, enter recovery, wipe cache partition and do wipe/factory reset, then reboot into a now working phone, set up for root with USB and so forth, root and install CWM, copy the custom ROM to my SD-card (gonna go for ParanoidAndroid) as well as Google services if I want those, and then install them via CWM/Mobile Odin?
Godofmosquitos said:
Wow. A lot of replies in just a single day. You guys are awesome
Now you say that the KK5 is non-wipe. Are there any GB-roms which are wipe, so to speak? Or do I have to do the flash to GB, enter recovery, wipe cache partition and do wipe/factory reset, then reboot into a now working phone, set up for root with USB and so forth, root and install CWM, copy the custom ROM to my SD-card (gonna go for ParanoidAndroid) as well as Google services if I want those, and then install them via CWM/Mobile Odin?
Click to expand...
Click to collapse
GB LC1 is wipe. But if you want PA (which is an excellent choice) just flash a CM10 kernel in your recovery (if your recovery is safe, like GB for example). Then follow Utacka's instructions for the installation.
But if I want CWM I should do root and install CWM there? And then flash the custom ROM from CWM?
Godofmosquitos said:
But if I want CWM I should do root and install CWM there? And then flash the custom ROM from CWM?
Click to expand...
Click to collapse
The CM10 kernel comes with its own recovery where you can flash from. If you have root issues, just flash CWM-SuperSU-v0.99.zip. In any case don't flash from stock ICS with CMW.zip: if you are on ICS and not rooted flash the relevant Philz kernel (which is safe and will give you root and CWM) then the CM10 kernel.
Edit: what ROM do you have now?
I use the 4.1.2 XXLSA ROM
Btw, anyone knows where I can download the Google Services Framework so I can install it alongside Paranoid Android? I have been led to believe it's not included as per default
Thx for all the replies!!
If you have downloaded the xxlsa rom then it's inside the rom zip file. Path system/app/GoogleServicesFramework
nokiamodeln91 said:
If you have downloaded the xxlsa rom then it's inside the rom zip file. Path system/app/GoogleServicesFramework
Click to expand...
Click to collapse
Hmmm. not that I can see. Even tried unpacking the .tar files. Can't find it :/
Edit: Ah, found it Thx for all the help