[Q] Home screen completely gone. - Captivate Q&A, Help & Troubleshooting

I have the captivate from rogers (canadian SGH-I896)
It is running KH2 (RWC) firm ware according to Kies.
I rooted the phone and was uninstalling some bloatware via titanium backup
when I musta removed something unholy.
As when I tried to close titanium backup I had no home screen at all. Upon reboot I still have no home screen. I still ahve the notification menu pull down.
When I receive a txt I can type and reply to it but I can do nothing that involves the homescreen it is completely blank.
I tried to factory reset the phone but it did not fix the issue. I tried searching and could not find anyone who had the same problem.
Any advice?
EDIT - I followed this link (Samsung Galaxy S APK List)with respect to uninstalling the bloatware:
But, as it was not rogers specific I removed all the rogers stuff (Account, ring back, etc) I also did remove Y! Finance clock which I have now read was also a bad idea.

There might be an easier way but I would try flashing a new rom. Or flashing back to stock using Odin or heimdall. Do you have a custom recovery?
Sent from my SGH-I897 using xda app-developers app

I was using the stock ROM from kies. And I had no flash back up or anything to fix my phone (which in the future I will make sure I do!)
When I try to reflash my ROM using kies it says I already have the newest one. so I reckon I will have to download the stock rom from somewhere else and flash it my self?
Should I go back words to Eclair and then reflash using keis to gingerbread?

I wouldn't worry with kies. There is a heimdall one click that will take you back to stock froyo or gingerbread ( your choice) and will already be rooted and I'm pretty sure it removes bloat ware. Just download it to your computer. Put your phone into download mode hook it up and run the program.
sent from my cappy running latest cm9 nightly and devil kernel

Thank you very much, I shall try it and hope for the best!
In the future ill make sure I make a full back up of my system before I do something stupid..

http://forum.xda-developers.com/showthread.php?t=1266172
Go there and there is a link to heimdall one click that will put you back to 2.2 rooted
sent from my cappy running latest cm9 nightly and devil kernel

Wicked homescreen is back, thanks alot!

Related

[Q] Please Help neewby

ok, so i downloaded a stock froyo Rom i897ucji6-ocd-rev02 low, and the son of a gun works perfectly. Problem, i want to flash a custom rom from cognition but the instructions say to flash back to your stock rom which for me would be 2.1.1 becasue i have a samsung captivate from att, i cannot get back to 2.1.1, tried using odin master clear nothing changed, could the reason i cannot get back to 2.1.1 is because i deleted the att bloatware? and is there a download that will bring my phone back to 2.1.1? if not i can live with the froyo 2.2 stock. and one more thing Please can some all knowing developer create a program (app) to allow the att captivate (god love em) download after market apps.
LOVE THIS PHONE and the xda forums are good reading even for a android neewby
ask in captivate forum, also search for sideloading app on the captivate forum
ronf1011 said:
ok, so i downloaded a stock froyo Rom i897ucji6-ocd-rev02 low, and the son of a gun works perfectly. Problem, i want to flash a custom rom from cognition but the instructions say to flash back to your stock rom which for me would be 2.1.1 becasue i have a samsung captivate from att, i cannot get back to 2.1.1, tried using odin master clear nothing changed, could the reason i cannot get back to 2.1.1 is because i deleted the att bloatware? and is there a download that will bring my phone back to 2.1.1? if not i can live with the froyo 2.2 stock. and one more thing Please can some all knowing developer create a program (app) to allow the att captivate (god love em) download after market apps.
LOVE THIS PHONE and the xda forums are good reading even for a android neewby
Click to expand...
Click to collapse
Master clear does not bring you back to stock. You are using the wrong aspect of the odin program
http://forum.xda-developers.com/showthread.php?t=731989
Read this thread and you should be able to find the way
Sent from my SAMSUNG-SGH-I897 using XDA App

[Q] NO Filmware Cant update to Froyo

what do I have to do to use the phone update?
i think my phone was rooted using Titanium Backup (installed)?? The phone also has one click lag fix.
Ive tried running update it doesnt work. no filmware to resume. Do i have to do something special? I dont want to lose data. Thanks for helping a noob.
webrobert said:
what do I have to do to use the phone update?
i think my phone was rooted using Titanium Backup (installed)?? The phone also has one click lag fix.
Ive tried running update it doesnt work. no filmware to resume. Do i have to do something special? I dont want to lose data. Thanks for helping a noob.
Click to expand...
Click to collapse
If you want Froyo then your only options are to flash back to stock and then use kies mini to get the update or flash a custom ROM based on the new release.
webrobert said:
what do I have to do to use the phone update?
i think my phone was rooted using Titanium Backup (installed)?? The phone also has one click lag fix.
Ive tried running update it doesnt work. no filmware to resume. Do i have to do something special? I dont want to lose data. Thanks for helping a noob.
Click to expand...
Click to collapse
Att learned their lesson on the last OTA. The update is with Keis only
Sent from my SGH-I897 using XDA Premium App
Can I flash back using one clicklag fix or Titanium Backup?
And, I download kies.
Titanium backup only backs up your apps and data.
One Click Lag Fix? -- is a.. lag fix.
Are you still on 2.1? Or are you on 2.2 right now?
one click had a button to unroot. 2.1. [How do I "flash back to stock"?]
This one [STOCK ROM] Odin3 One-Click Downloader and Drivers CAPTIVATE ONLY if you have the three button recovery.
This one I897UCJH7 - OTA System, Kernel, Modem - Clockwork Flashable - Rooted if you want to use CWM.
This one {Stock Rom} Odin JF6 with 3 button fix if you need the three button fix.
I installed official 2.2 via Kies right over rooted 2.1 with no issues. After the install, TiBu was still there, but would not work until I rooted 2.2. What I am saying is that, in my experience, flashing back to stock before updating via Kies was not necessary and by skipping that step all of my aps, SMS, and call logs migrated over seamlessly.

[Q] After flashing back stock ROM, the phone keeps blinking on the boot screen (HELP)

I am in desperate need of help you guys! I screwed up so hard that I don't even know where to begin...
THE SITUATION:
-Right now when I go to turn on my phone, it will only stay on the current SAMSUNG GALAXY S I9000 screen (the very first screen when booting your phone) and it keeps flashing in and out.
Before trying to use Odin to put back the original Kernal on my phone, it was just stuck as the SAMSUNG GALAXY S I9000 screen, still wouldn't start. <I followed this website step by step>
http://www.samsunggalaxysforum.com/...-to-a-stock-rom-after-installing-darky's-rom/
BEFORE ALL OF THIS EVER HAPPENED:
I finally rooted my phone and manage to download Clockworkmod recovery on my phone and then used it to flash Darky's 10.2 custom ROM. Everything turned out great except at the beginning of the boot, the screen turned all rainbow coloured, completely distorted, and it continued to do that. I then tried to go back to Recovery mode to do the Voodoo lagfix but I couldn't even get into the recovery mode anymore, it either wouldn't let me, or it did but the screen didn't go to it properly (more likely the first one). I read somewhere that if you reflash your phone again, it should make all the tweeks go away. So I tried that from the Darky's tools menu and ever since then, I've been stuck with the Boot Screen this whole time...
I already bricked my phone once, and that was before the Flashing Boot Screen.
I really need help you guys, I would at least like to have my phone back to the original basis, at least! Your help would be greatly appreciated!
THANK YOU
P.S. (i'm not that great at all this phone tweeking, but I've succeeded in doing it up until yesterday)
Can you get into download mode (vol down+home+power while putting the battery in)?
If you can, just reflash a stock or custom rom in odin (like a darky odin rom) as guided by whatever rom you choose.
If you cannot get into download mode then we should know that too.
Edit: oh it looks like you could (and hopefully still can). Try a different rom or reflash. Sometime things do go wrong but as long as you can get to the download screen you should be fine in the end.
G
gfacer said:
Can you get into download mode (vol down+home+power while putting the battery in)?
If you can, just reflash a stock or custom rom in odin (like a darky odin rom) as guided by whatever rom you choose.
If you cannot get into download mode then we should know that too.
Edit: oh it looks like you could (and hopefully still can). Try a different rom or reflash. Sometime things do go wrong but as long as you can get to the download screen you should be fine in the end.
G
Click to expand...
Click to collapse
Yes, I can get into download mode! (thank you for reading my post).
If it's not too much to ask, could you maybe find the ROM that would be good for me to flash, considering my situation?
I want to be sure that it's what the top tech guys would recommend
A link would be appreciated
thank you again!
I'd start with a Darky rom - lots of users - active forum and odin editions for your situation. I have to go but you'll find the link on the first page of the development section.
G
gfacer said:
I'd start with a Darky rom - lots of users - active forum and odin editions for your situation. I have to go but you'll find the link on the first page of the development section.
G
Click to expand...
Click to collapse
So in essence all I have to do is flash the Darky ROM V10.2 with Odin using the Download mode on my phone and it should be okay?
Wait one caveat. Was it a gingerbread rom or froyo? Use a Darky rom of the same type...
Then yes it should be ok if you follow their guide. Cross fingers.
Sent from my GT-I9000M using XDA Premium App
gfacer said:
Wait one caveat. Was it a gingerbread rom or froyo? Use a Darky rom of the same type...
Then yes it should be ok if you follow their guide. Cross fingers.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
well...I did everything you said. The ROM is on there alright, it flashed and everything (And I know this because now when the boot screen STILL FLASHES, the darkcore & darky's rom logo are on it too).
THIS TIME AROUND:
The stock recovery seems to work...
any ideas??
Well we are sort of in long shot territory now... OK first try using a different odin version or ez odin and reflash.
If still not working??
Might be warranty time then but others are welcome to chime in.
Sent from my GT-I9000M using XDA Premium App
gfacer said:
Well we are sort of in long shot territory now... OK first try using a different odin version or ez odin and reflash.
If still not working??
Might be warranty time then but others are welcome to chime in.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
Alright I'll try and reflash the same one using a different version of odin the. I'll let you know what happened
gfacer said:
Well we are sort of in long shot territory now... OK first try using a different odin version or ez odin and reflash.
If still not working??
Might be warranty time then but others are welcome to chime in.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
tried ezodin, flashed it, and i still get the exact same thing I've exhausted every single possibility there is!!!
I really need help on this, my warranty is not gonna do anything because i have the phone rooted..
If you flash a stock rom with pit the root is gone. It won't boot but they can't prove it was you either and I don't think it was you.
But see my other post on your other thread for one last thought.
G
Sent from my GT-I9000M using XDA Premium App
gfacer said:
If you flash a stock rom with pit the root is gone. It won't boot but they can't prove it was you either and I don't think it was you.
But see my other post on your other thread for one last thought.
G
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
okay that could be useful data potentially (let's hope it won't have to be).
If you didn't see my reply from the other thread, here it is:
Once I rooted my phone, I automatically went from Stock Froyo to Darky's 10.2 extreme edition. It worked and everything except for that color disfiguration and the clockworkmod recovery not working.
It's weird because after I flashed my first darky's rom, i checked the phone and it said that the firmware version was 2.3.X (I believe X may have been 4). So from what you're saying, I don't exactly think it has anything to do with the fact that I went straight from froyo stock to GB darky ROM.
So are you saying that I should flash darky's 9.3 for Froyo and THEN flash the latest version?
No I think that you need froyo re edition then stock gb with bootloader (as the instructions say I thought) then a custom gb like 10.2.
Sent from my GT-I9000M using XDA Premium App
gfacer said:
No I think that you need froyo re edition then stock gb with bootloader (as the instructions say I thought) then a custom gb like 10.2.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
Ok, so just to be 100% on this
-I should flash Darky's 9.2 froyo onto my phone,
-then I should flash regular GB onto my phone (Not sure about the bootloader part though, if you could clarify that)(Also where would I get JUST a stock GB ROM?)
-then I can flash a custom GB ROM?
gfacer said:
No I think that you need froyo re edition then stock gb with bootloader (as the instructions say I thought) then a custom gb like 10.2.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
well i can safely say that flashing the 9.2 froyo rom was a fail. It's still doing the same old routine.
I just know that this problem can be fixed somehow without sending it in to bell or samsung or something.
roma17 said:
well i can safely say that flashing the 9.2 froyo rom was a fail. It's still doing the same old routine.
I just know that this problem can be fixed somehow without sending it in to bell or samsung or something.
Click to expand...
Click to collapse
I think you are right but other than trying again and again, which I've done before -though now I know why I had too - I am out of suggestions. Good Luck and if I have a brainwave I'll let you know.
Sent from my GT-I9000M using XDA Premium App
OK a few last brainwaves:
1) Try a fully complete stock rom with cache.rfs, dbdata.rfs, factoryfs.rfs, modem.bin, param.lfs, zImage, and sbl.bin (this was from JL2 rom for Bell - not sure if they all have the sbl.bin) and pit.
The key is to make sure it is complete. Try downloading the same rom from 2 different sources just to be sure its not a corrupt download (going overboard I know).
2) Can you get into recovery? Try to format partitions (not system) under advanced features (I think - I only have 3e right now as I am trying to diagnose other issues).
3) If you have a froyo rom on at one point, try to put a steam recovery kernel on. Its not really being developed anymore but I think that if you put a CWM packaged rom on to the external SD you could flash from there or at least move it to the internal and then flash it. Worth a shot. Or you might be able to transfer one in regular CWM recovery - can't recall as I have not had to try for about 8 months.
4) If you really want to try something completely different, and I am not sure I've got the balls if it was me but if you can get a file to flash from CWM or steam that you can get on from the external SD, you might try CM7. It uses a completely different file system so you'd have to go back to froyo via odin only (as a samsung based rom will not play well when flashed on top of the cm7 file system).
And calling it a day at this one...
gfacer said:
OK a few last brainwaves:
1) Try a fully complete stock rom with cache.rfs, dbdata.rfs, factoryfs.rfs, modem.bin, param.lfs, zImage, and sbl.bin (this was from JL2 rom for Bell - not sure if they all have the sbl.bin) and pit.
The key is to make sure it is complete. Try downloading the same rom from 2 different sources just to be sure its not a corrupt download (going overboard I know).
2) Can you get into recovery? Try to format partitions (not system) under advanced features (I think - I only have 3e right now as I am trying to diagnose other issues).
3) If you have a froyo rom on at one point, try to put a steam recovery kernel on. Its not really being developed anymore but I think that if you put a CWM packaged rom on to the external SD you could flash from there or at least move it to the internal and then flash it. Worth a shot. Or you might be able to transfer one in regular CWM recovery - can't recall as I have not had to try for about 8 months.
4) If you really want to try something completely different, and I am not sure I've got the balls if it was me but if you can get a file to flash from CWM or steam that you can get on from the external SD, you might try CM7. It uses a completely different file system so you'd have to go back to froyo via odin only (as a samsung based rom will not play well when flashed on top of the cm7 file system).
And calling it a day at this one...
Click to expand...
Click to collapse
Okay, basically at this point, I just want my phone to work I've tried what you said. I remember that before rooting my phone initially I was running Froyo 2.2.1. So I found the ROM for that ( http://www.samfirmware.com/WEBPROTECT-i9000.htm ) Just like you said. I downloaded from the *Provider Samsung Galaxy S i9000 heading and picked the I9000BOJS5 ## from February 2011 because I think somewhere around there I updated my phone to Froyo. Flashed it, did everything, still no luck.
I've had a recent hunch though. When the bootscreen boots up, it keeps saying i9000 only, when before it used to say i9000M at least for a little bit (yes my phone is i9000m). Is there a stock froyo rom that's specifically designed to go with the i9000m model? Or are they just all the same?
Never give up
-Thank you so much

Need help with installing a custom rom.

Please help!!! I have searched and searched and searched the forums and have come across so many threads on how to add a custom rom to your Captivate.
To start, what I have been trying to do is add a custom rom after upgrading my phone from ver 2.2 to 2.3.3 GB. Some posts say you can just upgrade with the 2.3 on the phone, other posts say you need to take the phone back to the stock 2.1 rom. Then you find posts that say, make sure you have the stock bootloaders and kernals when you downgrade to the stock 2.1.
You can easily see how even a somewhat above novice can get confussed. To take my phone back to 2.1 I have followed posts that say use Odin 1.3. I have used odin before so no big deal. However in this case again you are getting different opionions and versions on this. Some have just the odin .exe and others have the .exe and the MD5 and .ini it the package. I am assuming that the one with just the .exe has everything built in as the size is quite big.
I have tried both ways and after I "Flash" it will not finish with the normal recovery mode and see the linux script. It will go to the ATT window and just keep rebooting over and over. I then will use my JIG and get back in download mode in order to reflash back to 2.3.3 just to get the phone to work again.
Can someone please give me a clue as to what I am doing wrong or direct me to the proper files and maybe some better step by step instructions.
Thanks in advance for the help.
What Rom is currently on you phone? Which Bootloaders do you have installed?
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
Rhiannon224 said:
What Rom is currently on you phone? Which Bootloaders do you have installed?
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
Click to expand...
Click to collapse
Here is the info:
Firmware: 2.3.3
Baseband: I897UCKF1
Kernel: 2.6.35.7-I897UCKF1-CL273832
Build: GIGERBREAD.UCKF1
^ From the looks of what u posted, it looks like u have the leaked i897uckf1 currently on ur phone. If that is the case, then u could Odin the Cognition Beta 2 Kernel and then flash the latest Cog Rom (having already copied it to ur internal sd).
Just flash the kernel through Odin then use button combo (volume +/- and power...release after u see the at&t screen) to get into CWM 4.0.0.5 and flash Cog 5 v 1.00 from there.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Are you plugging into a usb port in the back of your pc? Also, there are several methods for flashing back to stock now, once you upgrade to GB bootloaders you don’t ever want to use the Odin with the button fix because it will only flash the secondary bootloader and the primary bootloader will remain GB and the result will be a hardbrick. Also, some of the newer builds came with Froyo installed and using the older 1 click Odin by DesignGears will put those devices in a bootloop. So it really is dependent on your device and your needs. I now use the method outlined in the Continuum 6.1 thread which will not touch the bootloaders and brings you safely back to 2.1 stock. I always clear user data and cache in recovery, flash back to stock using Cezar's method (not a 1 click) prior to flashing a new Rom. Most devs recommend flashing to stock first because there is less chance of corruption.
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
http://www.youtube.com/watch?v=UOyx5JQ_8_I
MobileTechVideos video is how i flashed my first gingerbread ROM. Its easy, straight forward and he has all the links you will need under the video.
piece-a-cake
Gupone said:
Please help!!! I have searched and searched and searched the forums and have come across so many threads on how to add a custom rom to your Captivate.
To start, what I have been trying to do is add a custom rom after upgrading my phone from ver 2.2 to 2.3.3 GB. Some posts say you can just upgrade with the 2.3 on the phone, other posts say you need to take the phone back to the stock 2.1 rom. Then you find posts that say, make sure you have the stock bootloaders and kernals when you downgrade to the stock 2.1.
You can easily see how even a somewhat above novice can get confussed. To take my phone back to 2.1 I have followed posts that say use Odin 1.3. I have used odin before so no big deal. However in this case again you are getting different opionions and versions on this. Some have just the odin .exe and others have the .exe and the MD5 and .ini it the package. I am assuming that the one with just the .exe has everything built in as the size is quite big.
I have tried both ways and after I "Flash" it will not finish with the normal recovery mode and see the linux script. It will go to the ATT window and just keep rebooting over and over. I then will use my JIG and get back in download mode in order to reflash back to 2.3.3 just to get the phone to work again.
Can someone please give me a clue as to what I am doing wrong or direct me to the proper files and maybe some better step by step instructions.
Thanks in advance for the help.
Click to expand...
Click to collapse
Listen, I'm new at this and learned watchin mobiletech videos from youtube. At first I found it hard but now is pretty easy (in my opinion). The first thin I do is back up apps with titanium and paste to my laptop (for me is faster to install them back), go back to stock 2.2, master reset using dialer (no odin), root, reboot, install rom on sd card, using odin i install bootloaders (I9000), flash talon kernel (odin), flash rom (CWM) and reboot. That's how I do it. Now, I could b wrong but doing it that way, in that pattern works for me. Like I said, I'm new at this but trust me....I've done it several times and it works for me. Keep reading and then decide how you want to do it. Good luck..."HONESTLY"!!!
It all depends on where you are now and where you want to go.
Sent from my SGH-I897 using XDA App
I'm new to all of this and have done a good amount of research but seems like the information never ends and there are a few ways to load a custom rom.
Method one
BACK UP!!!
Flash to stock (FTS)
Wait for your phone to reboot and then re-enable debugging
Hook phone back up to pc and Master Clear (MC) using Odin
Load Clockwork update.zip (DOWNLOAD)
Load FireFly_X-X.zip to phone memory
Remove sim and external SD, and unplug USB
Boot into recovery and reinstall packages (You may have to reinstall packages twice to get to Clockwork recovery)
Once in Clockwork recovery (Green Text), select install zip from SDcard
Next select choose zip from sdcard
Scroll down to FireFly_X-X.zip and select the file
This will run the script and install the ROM to your phone
After this is done, select go back and then select reboot phone
This may take a while, so leave your phone and go grab a snack!
Method 2
Load ROM file onto phone
Boot into recovery
Select ROM and flash it
Reboot, wait and enjoy
Wash, rinse, repeat!
What are the differences? Which one is better?
Seems like the first video is very simple and straight forward?
Am I missing something here? I'm already rooted and used titanium backup.
I'm on 2.2 Froyo and wanting to flash to Firefly 3.0
Thanks!

[Q] Keep getting "Unregistered device" while updating to Gingerbread

Okay, so I did a factory reset, no custom roms, only had official Froyo and Speedmod kernel. I also unrooted. Why do I keep getting "Unregistered device" from Kies Mini? Maybe it's because my Baseband version on "About Phone" shows "I9000UGJK4"? Or is it maybe that their servers are being bombarded by Cappy users updating their phones? Any help is greatly appreciated.
If you have flashed a custom ROM before, it won't work. Just wait on a Odin/Heimdall one click!
Sent from my SGH-I897 using xda premium
aicirt17 said:
Okay, so I did a factory reset, no custom roms, only had official Froyo and Speedmod kernel. I also unrooted. Why do I keep getting "Unregistered device" from Kies Mini? Maybe it's because my Baseband version on "About Phone" shows "I9000UGJK4"? Or is it maybe that their servers are being bombarded by Cappy users updating their phones? Any help is greatly appreciated.
Click to expand...
Click to collapse
This worked for me, I tried this morning, I had the same issue while on CM9 ICS.
As mentioned flashing any rom your device's I'd might change. I've never had my imei change but read enough ppl to know it happens.
Sent from my SGH-I897 using Tapatalk
I don't know if this matters, but I've never installed a custom ROM, only a custom modem and kernel. Would that change the IMEI?
Have you messed with unlocking it?
Sent from my ICS powered i897
I'm pretty sure kies mini will detect kernel changes. I had stock froyo with a flashed kernel and it wouldn't let me update. I flashed everything back to stock, but was still rooted, and it still wouldn't let me update. I ended up doing a full flash back to stock kb2 and it finally let me upgrade.
I wonder if I flashed the stock kernel and unrooted if it would have worked. At the time I was too lazy to browse for everything and already had the heimdall package downloaded.
Sent from my SAMSUNG-SGH-I897 using XDA App
If your "About Phone" shows anything other than SGH_I897 kies mini will not recognize your device. I was running andromeda , wouldn't see it so I went back to stock, oneclicked jf6. After that kies immediatley recognized it. I probably didn't have to go back to jf6 but, I had nothing better to do for that next hour. If you do go back to jf6 you will have to kies mini twice to get GB, first time it will install froyo, when it's done close kies, unplug re-open kies, re-plug your phone kies will show update again, click and sit back and wait for it to finish. ...you now have GB.
Thank you all for your help. I finally got it. I ended up RE-flashing back to stock using this method: http://forum.xda-developers.com/showthread.php?t=1300843
Turns out that I did in fact have a custom modem and custom kernel, and when I flashed back to stock the first time (I used Clockwork Recovery), it didn't put back the original modem and kernel, thus making Kies Mini not recognizing my phone. So, after RE-flashing the ORIGINAL OFFICIAL Froy update using the above link, everything went smooth fronm there. Hope this helps somebody.

Categories

Resources