Database Develop

[Q] back to stock from ics teamhack...

When flash with stock rom with odin, the phone no pass from galaxy s picture a reboot and reboot again and try to restore with cmw and the same problem. How i can get the stock rom again? Thanks

wiped AND cleared cache and dalvik?

No, i try this and tell you later...

No man. wipe cache, wipe dalvik, eips factory data and do the same problem, reboot and reboot. But re-install ics and work ok. Another suggestion?

Did you use the option Re-partition in Odin when you flashed back to stock?
Sent from my GT-I9000 using XDA App

What build number is your phone? Didi you use 1 click jf6? You don't need repartition since its been proven the "safe" KF1 1 click doesn't repartition and works just fine.

I trying UCKK4 and flashing with odin and wipe everything. I brick the phone, i think that because the phone show the sing of dead and unbricked thanks to ONE CLICK unbrikable for windows posted by AdamOutler. uuufffffff this safe my phone jajajaja.

Problem Solved....

[Q] Note doesn't start after ICS-Update

Hi guys,
I just updated my Note from GB 2.3.6 CheckROM with SpeedMod 2.8 to ICS 4.0.3 with CF 5.6 with Mobile Odin Pro...
I didnt checked Wipe Data, only Dalvik Cache..
So after the update my Note doesnt boot properly, after hearing the starting sound nothings happens...
My question is now... can I Wipe Data in CWM (CWM works completely).. or whats about the bricking with CF-Root and Fullwipe etc...
Thanks

Try wipe cache and dalvik cache.

Nothing new happens...
I still havent any boot animation (since months after I installed LiveLogcat etc..)
I always see Galaxy Note logo etc., then I hear the starting sound only...then screen is still black
Edit:
I flashed AbyssNote kernel 4.2 Final RedPill Touch Original Logo...
What now to FullWipe?
Wipe Data, Wipe Cache, Wipe Dalvik?
Or what now...?

I tried Wipe Data with Abyss 4.2 now... still doesnt boot...
Do I need ICS kernel again? Or should it also work with Abyss 4.2?
Can I restore a gingerbread backup without any problems... if... how to restore correctly?

MojoManagement said:
I tried Wipe Data with Abyss 4.2 now... still doesnt boot...
Do I need ICS kernel again? Or should it also work with Abyss 4.2?
Can I restore a gingerbread backup without any problems... if... how to restore correctly?
Click to expand...
Click to collapse
The Nand back will include kernel as well. You can just go in CWM and go to backup and restore and choose restore and choose the restore package from CWM folder in your sdcard. (CWM should point you there automatically).
After restore things should work otherwise there maybe other problems somewhere that need further investigation. cheers.

- flash AbyssKernel 4.2
- REBOOT RECOVERY
- FULL WIPE
- flash any GB or ICS custome rom
- reboot

I restored my gb backup.... it works now as before...
So yesterday I wanted update to ICS....
Dunno what I did wrong...
Mobile Odin Pro with ICS 4.0.3 Rom and CF 5.6 Kernel with Wipe Data and Wipe Dalvik...
This should work?!

help in downgrading from lpa to gb

i was on lpa(4.0.3) india rom and now have flashed lc1
but i am getting force close for calender storage ...
what shud i do
i have reflashed and also wiped cache
thanks
edit :- setting>>app.manage app>>all app >> calender storage
now cleared data
that calender fc stopped
but when i went in setting to change ringtone
i am getting setting force close and also gapps force close
is factory reset only option ??
thnx

sitanshu91 said:
i was on lpa(4.0.3) india rom and now have flashed lc1
but i am getting force close for calender storage ...
what shud i do
i have reflashed and also wiped cache
thanks
edit :- setting>>app.manage app>>all app >> calender storage
now cleared data
that calender fc stopped
but when i went in setting to change ringtone
i am getting setting force close and also gapps force close
is factory reset only option ??
thnx
Click to expand...
Click to collapse
You should do a fresh flash...go back to stock GB....or flash abyss kernel (GB version) and then perform a full wipe. Never do a wipe in an ICS
kernel...then re flash the firmware...make sure that u are in GB when u do the full wipe.
If you decide to flash abyss kernel, flash it and then reboot recovery...do not reboot the phone or it will fail as GB kernels do not work with ICS. :good:

glevitan said:
You should do a fresh flash...go back to stock GB....or flash abyss kernel (GB version) and then perform a full wipe. Never do a wipe in an ICS
kernel...then re flash the firmware...make sure that u are in GB when u do the full wipe.
If you decide to flash abyss kernel, flash it and then reboot recovery...do not reboot the phone or it will fail as GB kernels do not work with ICS. :good:
Click to expand...
Click to collapse
actually i am on gb now (as i have flashed 2.3.6 lc1 firmware )
but i am getting various force close issue
i do not want to do a factory reset as this will erase all data
is there any other way ?
i am always on stock rom and never rooted

sitanshu91 said:
actually i am on gb now (as i have flashed 2.3.6 lc1 firmware )
but i am getting various force close issue
i do not want to do a factory reset as this will erase all data
is there any other way ?
i am always on stock rom and never rooted
Click to expand...
Click to collapse
Root your phone , back up all data using titanium back up and reboot to recovery , wipe data , cache , dalvik cache from the clockworkmod recovery and flash a good gingerbread rom . And if you think rooting your phone spoils your phone etc etc then you are wrong !!!!! If you have fear of loosing your warranty you can always unroot your phone . after fresh install restore all your data with the titanium back up , you wont loose any data may it be paid app , or anything , it will be restored . And if you have fear of loosing your data like songs and other stuff on your sd card then dont worry , wiping data wont wipe your sd card

Happens all of the time after you downgrade, Sounds like you didn't clear cache/Dalvik etc once you'd downgraded to GB.. If you're on GB - Can always try to boot into stock and factory reset (this will not wipe your internal and external SD card so photo's and music will be safe.)

How do I factory reset my Note?

My phone is not modified at all. All I've done is OTA update to ICS 4.0.3.
The problem is that I feel my phone is buggy and gets hot. My Galaxy S2 was the same at first after the ICS update but a full reset and cache wipe seemed to solve the problem.
From what I've read it is not safe to do factory reset on a stock phone if you have the brick bug (I do).
Of course this is something you should be able to do and if the phone failed I could get a warranty replacement, however I'd rather not go through the hassle.
Question is then, what CAN I do? I'd like to factory reset and wipe internal storage to get back to factory fresh.

Go back to gb wipe data and everything and come back to ics
Or
Flash abyss kernel on your note and wipe data and everything
Or
Give your phone to Samsung service center
Sent from my GT-N7000 using xda premium

Since your phone is not rooted it's not recommendable to flash abyss. It will raise your flash counter and you will loose warranty. Flash a Gingerbread stock rom (original) instead using pc odin. Afterwards you can update again to ICS, once more using pc odin.
Sent from my Galaxy Note running ICS

http://forum.xda-developers.com/showthread.php?t=1793665
Same as I did last night.....Now "Factory fresh" and running Stock ICS rooted and SMK3-7 kernel..

Stuck on Samsung logo screen after flashing stock ROM

I tried following the steps indicated in this thread http://forum.xda-developers.com/showthread.php?t=1424997. I was able to successfully flash the ROM N7000DXLR5---4.0.4/12.07.30-N7000OLBLR2---Download--Philippines (Smart) . I was already on the last part where the phone should reboot and would install some applications but the phone is just stuck on the Samsung logo screen. I waited for almost 2 hours already. I tried taking out the battery and rebooting the phone but its still stuck in the Samsung logo. The Volume down+home+power key is still working as well as the volume up+home+power key. I don't want to take another step because I'm afraid of my phone getting bricked.
I previously had a Jellybean custom ROM installed but don't like it since S-Pen features aren't working.

Install philz ics kernel from stock recovery and reboot into recovery. You will see cwm. Now do a factory reset. Then reboot.

You need a factory reset but 4.0.4 is not a safe kernel, that's why you need Philz kernel.
If you want a full stock ROM with kernel (like I need to send for warranty repair),
flash any GB stock rom appropriate for you, (still hang at samsung logo),
factory reset on recovery and update using kies to 4.0.4

nokiamodeln91 said:
Install philz ics kernel from stock recovery and reboot into recovery. You will see cwm. Now do a factory reset. Then reboot.
Click to expand...
Click to collapse
Follow him not one above me
Sent from my GT-N7000 using Tapatalk 2

Stuck at Samsung logo
Stuck at samsung logo
running on siyah kernel v6.5b
tried to install alliance mod rom v8 and ended up at samsung logo
tried factory reset and also the wipe cache partition dint work erased the dalvik cache too
what do i do now??
I have access to root..
What do i do now??

algorithm101 said:
Stuck at samsung logo
running on siyah kernel v6.5b
tried to install alliance mod rom v8 and ended up at samsung logo
tried factory reset and also the wipe cache partition dint work erased the dalvik cache too
what do i do now??
I have access to root..
What do i do now??
Click to expand...
Click to collapse
if you are using N7000 then siyah kernel is not meant for this device as yet.
try to philz kernel if you can access recovery and then try to flash alliance rom.
or simply flash stock rom accessing the download mode.