Database Develop

HEY! Can't get adb to boot into recovery? Try this!

Follow the official method posted everywhere on this forum, I won't get into that part.
But if you've been doing all your little tricks like pushing the card in and out, or waiting for the windows chime, and it hasn't worked... stop and listen up!
Look at your phone while you're waiting for the chime. Don't do anything yet, just look at the screen. Right before windows does the sound you'll see the screen flicker. Did you see it? ok good.
When I was trying this everyone said the reconnect sound would happen before I got into the screen with the ! Triangle. Mine always happened after a couple seconds on that screen. Also, I noticed the screen always flickered when windows disconnected from the phone.
try this:
when you're trying to get your phone into recovery do the 10 minute video method, and when you see the screen flicker immediately push the sd card in. This was the only way I was, or am able to get the phone into recovery. I was able to do it successfully on 2 different incredibles this way. I used a 16gb card from the moto droid, and the 2gb PNY from wal-mart successfully on both phones.
Please don't dowse me with gas and set me ablaze! just trying to help. Never said it was a final solution, just hopefully helps someone.

Yep worked for me too, this method has been updated in the unrevoked teams rootwiki.

generic.imitation said:
Look at your phone while you're waiting for the chime. Don't do anything yet, just look at the screen. Right before windows does the sound you'll see the screen flicker. Did you see it? ok good.
Click to expand...
Click to collapse
Yep, I count from the boot vibrate and insert the card @ 7 seconds or when the scanline breaks for a second -- whichever comes first.
It's a simple rule that makes the whole process run smoothly, which is more than I could say when I started trying to root

Once again... No such luck for me. It was so much easier the first time i did it lol.

This has been the only method that has worked for me in the last week or so, and it has been very reliable. Usually get it within 5 attempts at worst. I have had success on only one pc, however, which is strange. I can move the usb to another pc after I get recovery and it works fine from there. This may just be coincidence, but it might be worth trying this method on more than one pc. YMMV.
Sent from my ADR6300 using Tapatalk

[Q] Bricked Nook

My nook was rooted and I was happily using it for about 3 weeks.
It was a ver. 1.0.0 model.
One night I went to turn it on and it wouldnt come on. I thought somehow the battery must have drained out. I plugged it in when I got home, but after a while I tried to start it and it still wouldnt.
What I have noticed is that the backlight comes on, changes intesity a couple times, goes off and then comes back on, like some sort of loop.
There is no message screen or N screen. There is no booting from SD, as far as everything I've tried to burn to SD and boot from.
I've tried all the key combos, some result in different variations of the backlight sequence but nothing else.
I think it is caught in some sort of loop before looking for any bootable system.
I want to try everything I (and everyone else) can think of before I go to the trouble of shipping it back to B&N.
Can you put the original stock system on an SD, even though I doubt it would boot from that either, but just a thought.
Thanks,
Phil

Looks like you are going to be enrolling in the NC advanced class. I really can't help on this but this weekend I plan one doing a the group install internally and I should be knowledgable afterwards.
Start by looking into creating the froyo image one a sdcard. There is a thread. The NC should be able to boot from that card. If it does great. Now look for thread about recovering images and using dd to write images. Someone did post the stock images 1.01

have you tried booting Nookie Froyo through an SD card? Then you could probably flash a stock rom (zip is in the forums) and restore.

Froyo
Yeah, I have Froyo on an SD card right now. Doesnt make a difference.
I have pretty much run out of things to try, unless there is some new, secret key combo that fixes everything.
I really don't think its even getting to the OS, I think I must have some real hardware failure that has nothing to do with the stock or rooted OS.

Sounds like it may be time for a warranty claim...

spiicytuna said:
Sounds like it may be time for a warranty claim...
Click to expand...
Click to collapse
i agree, if its not even getting to the point where it can boot from sd then theres nothing that i can think of that will work, at the point your at i dont think it can recognize any button input or usb data as there literally is nothing it knows how to do

Is this possibly the first successful Bricking?
I hope not!! Keep us posted on what works and what doesn't work.
Good luck, mate.
Cheers!

Received new Nook Color.
Well I did a warranty claim.
It was a very long wait on the B&N help line. I hung up and used the online chat window. That was a very long wait as well, about 25 minutes, but I finally got through.
After explaining all the things I tried and what the nook was doing, she wanted me to hold the power button for 10 seconds. I was like, "Ok, I've tried holding it for several minutes at a time, several hundred times, but what the hell." Then she wanted to know if I dropped it or not. Mine was pristine though, not even a scratch.
So finally she said I qualified for a replacement.
The deal is they give you a ups shipping label and they ship you a new Nook. If they determine that your nook got wrecked because of your own stupidity or whatever they bill you for the new one. She said the new one would ship the next day, but it didn't ship for over a week. I shipped mine the next day with the label they sent me.
So now finally I have my new nook. I haven't rooted it yet, though I probably will. I don't believe my problem was ever related to the software things I did, I dont believe that could wreck the hardware.
Also I never mentioned rooting it or anything.

Did you try burning CWR onto a SD card and seeing if it boots?

Nook color will not boot/black screen

my nook color will not boot at all. I formmatted /system and /boot, then it froze. Now I can't boot it up anymore. I was trying to update CM7.
Help please !
Thank you guys.

boot from an SD card. Works every time.

Even backlight doesn'flicker on.
Sorry, but I'll just borrow this thread for my Nook Color nightmare which may be more sinister than anyone else's on this forum.
I've read through Dummies Guide to Fixing 'My Nook Won't Boot' and was unable to come across a post that was able to solve my problem. However, there where three other posters who reported similar symptom as I, and who also were never able to find a solution.
I suspect that my NC, and the three other posters', is truly BRICKED.
Currently my situation is as follows:
- Attempt to power on NC does not yield any response, not even a flicker of the backlight turning on
- Cannot boot from uSD card that had previously successfully booted from in the past (have used it for flashing ROMs to EMMC).
- Attempt to power on while connecting to PC (XP) via USB causes computer to recognise device OMAP3630, but immediately loses it (NC unresponsive as per 1st point).
I had Nookie Froyo 0.6.8 on it for quite some time. And I think I witnessed it die. This is what happened: I turned on the screen using the N button. Everything seemed okay except that it was responding rather sluggishly to my inputs and gestures, and then it just froze (screen still on). I used the power button to try to cycle it but once it turned off that was the end.
I've already followed these suggestions:
- Press power button for 60 seconds.
- Press combination of Power, N, Volume.
- 8 boot attempts (as there is no visible response I press the button for 10 seconds, release it for 5, and then repeat that about nine times)
Hoping that someone could throw some suggestions around before I part with my expensive brick.

It's dead, Jim.
Why not do a warranty replacement?
Rodney

rhester72 said:
It's dead, Jim.
Why not do a warranty replacement?
Rodney
Click to expand...
Click to collapse
My thoughts exactly. Although I don't have extensive android experience, I've got a decent bit of PC time and that sounds like a problem based on faulty hardware rather than improperly installed software.
Sent from my NookColor using XDA Premium App

Other thing is, remember when messing around with flashing roms etc, that your battery is fully charged. Not sure about the nook, but for some phones, they don't charge while in this process and some people have bricked their phones while running out of power doing a flash.
I suspect you might have a battery problem and may not have a charge enough to boot from SD.

I'm in the same boat...
Same thing happened to me. I was fully charged, went to clockwork to boot while trying to update CM7 and now my nook is unresponsive. The only thing I get is the battery too low screen. It has been on its charger for 4 hours. If anyone has any suggestions...

I had the same problem.... wiped the boot and then was unable to boot even with SD card; only got black screen.. Then I decided to hold down the n and the power button at the same time and then after about five seconds I saw my screen flash and I let go of the power button and n buttons. Now the nook is booting fine off of my SD card once again... whew! Won't wipe boot again...

Time to replace this brick
lanje78 said:
If anyone has any suggestions...
Click to expand...
Click to collapse
Well, I've made the decision to exercise the 1 year replacement warranty.
I've been told by B&N customer support that you can simply walk in to a B&N store with the complete package (charger and cable) and they will replace it on the spot. Helps if you take the receipt with you.
For us people who live outside of the US it's a whole different kettle of fish...
UPDATE:
So I sent the NC back to my US seller and had it replaced under the 1 year warranty. I received a refurbished NC, but with the serial number starting with 2010... which I understand indicates a newer version.
I'm still wondering if OCing the NC may have cause the problem on my bricked one... I guess I will find out after I OC it again, which I am certain to do as it improves flash video play...

Please help. My phone won't start

I just bought the phone and using LGmobile update. It downloaded a file about 420mB and in the process update I got a message problem communicate with your phoneme. please disconnect take phone out etc.. and turn phone on and connect.
I follow the instruction but my phone won't turn on regardless to what I do.
Please help.

Sorry wrong paste..lol ..here is right info...
Check Device Manager for the current active "COM Ports"
Boot into DOWNLOAD MODE Plug the phone into the computer without the battery inserted Hold [VOL UP + POWER] Put the battery in and wait until it vibrates or for 3 seconds Check Device Manager for a NEW "COM Port...from dark lestat post in development... make sure to thank him
Then you should be able to re LG flash
Sent from my LG-P920 using xda premium

Keep having problem PC doesn't detect phone. Unplug, remove battery etc...so frustrated. Now everytime turn phone off I have to plug power cord in order for it to turn on. How do you do factory reset?

Give this thread a try ..follow exactly ....make sure battery has a charge and is not borked...these phones seem to have battery issues. If bat is good this is the info you want..seems like a lot of work but it is what worked for me. dark lestat is very knowledgable and helpful regarding these things. Hope this helps you..
Guess I should include link...lol.
http://forum.xda-developers.com/showthread.php?p=22417769
Sent from my LG-P920 using xda premium

Follow every step but got stuck when it trying to flash and stop at 20% just like when I update using LG software. Order new battery hope fixing the problem. My first LG android phone can't return bought it on craigslist

Hopefully the battery will help...good news is if you can connect and start the flash each time it is not bricked...i have not seen this problem posted before so doubt it is hardware...does adb see it...if so i would try to wipe system and data and reflash...i would also pull sim and sd card before flash to see if that helps ?
Sent from my LG-P920 using xda premium

Replace the battery with new and same problem, my phone doesn't even read my AT&T sim card.
Any button that I can do hard reset?

I had this same problem is your phone not turning on or just not downloading the update? I bricked my phone installing the update and it can be fixed but if you having problems with the connection during update you gotta keep trying it will go through. If it wont turn on at all there is a fix.
Sent from my LG-P925 using Tapatalk 2

This is the problem:
1. I bought new phone on Craigslist running 2.2 and everything working.
2. Connect to PC and set up driver, software etc.. there is an update so I did.
3. Got stuck about 17-20% and message disconnect and re-reconnect etc.. and I did.
4. Ever since I can't t urn it on unless connect to a charger.
5. I will not read SIM card and kept saying reorganized when check on setting and mobile network.
I am stuck here cause tried so many time. Also, phone turn off with full battery charge but next morning when I turn on completely drained. I think software screw up some how during the initial upgrade. Just don't know how to fix it

OK try this take your battery out and plug it into your computer and hold the volume down key until you hear or see your computer recognize it. It should beep a couple times. Be sure to leave your phone off this whole time. Open up your LG support tool. Once it says your connected open the customer support tab. Click on "Recovery Phone." Enter your phones info and click the check button. It should take you through the steps from there. I had the same problem and had also bought it from craigslist. The good news is even if this doesn't fix it, your phone is less than a year old and can be sent to LG for a fix or they'll send you a refurbished phone. They will want a reciept but if you don't have it just tell them you tossed it. Same for the box if you don't have that. They will do it just start getting angry if they give you the run around. I was freaking out just like you LOL. I couldn't find anything on the web and the LG lady was just as stumped as me... I just happened to try this before I sent it in and it worked. Let me know if you have any luck.
Sent from my LG-P925 using Tapatalk 2

As far as the update goes I eventually did get it to work. Just keep trying. I plugged it in to try again one time and it said my phone was already updated. I went and checked and sure enough it was. The visual change isn't dramatic your signal bars turn green and you get some more bloatware like a 3d game converter. The reason for this is the phone has a custom LG UI and will not adopt the gingerbread UI. Don't freak a lot of people insist its not GB but it is. There is a lot more to a OS than the user interface.
Sent from my LG-P925 using Tapatalk 2

Warranty thru LG or at&t? You mind give a little more. I didn't even know LG has a warranty in US?
Sent from my LT26i using xda premium

The warranty is through LG at&t wont do anything for you cause they will know you got it off CL. You'll need your imei and your s/n from under your battery. I wouldn't tell them you got it off CL. The only way this wont work is if the previous owner registered the phone with lg which is unlikely since they didn't even have the GB update. Call 18002430000. Again do not tell them you got it from CL. The phone is under a year old and they will do it for you. If it has to be told that it isn't yours say you had a step brother or friend give it to you. They will want a reciept but you can tell them you tossed it all and your imei Ans s/n will be enough. Also tell them it happened using their support tool. Good luck.
Sent from my LG-P925 using Tapatalk 2

PROlific666 said:
OK try this take your battery out and plug it into your computer and hold the volume down key until you hear or see your computer recognize it. It should beep a couple times. Be sure to leave your phone off this whole time. Open up your LG support tool. Once it says your connected open the customer support tab. Click on "Recovery Phone." Enter your phones info and click the check button. It should take you through the steps from there. I had the same problem and had also bought it from craigslist. The good news is even if this doesn't fix it, your phone is less than a year old and can be sent to LG for a fix or they'll send you a refurbished phone. They will want a reciept but if you don't have it just tell them you tossed it. Same for the box if you don't have that. They will do it just start getting angry if they give you the run around. I was freaking out just like you LOL. I couldn't find anything on the web and the LG lady was just as stumped as me... I just happened to try this before I sent it in and it worked. Let me know if you have any luck.
Sent from my LG-P925 using Tapatalk 2
Click to expand...
Click to collapse
I got panic and it's in local shop if they can repair it but will take it back and try. Thanks.. at least someone here tried to help me... the link flash back to stock ROM didn't work for down load so I can flash it. I even root and flash custom ROM still didn't work now I want to flash it back to stock... if you can just help me a little please

download mode: I got a little confused cause someone told me take battery out connect phone to PC and put battery back. Yours didn't mention anything about put battery back in

Yeah when I did mine it wouldn't turn on at all even when it was plugged in so I think i left my battery in and did it bc it wouldn't respond to anything. I would try to get it to recognize with the battery in but if it turns on after you do plug it in then it will need to be out. You can try to put the battery back in after the computer and the LG support tool recognizes your phone bc after it gets done it reboots. I'm not sure if the battery is needed for it to work but mine was in but you can try it multiple times with it in and out. I freaked out too I had just bought the phone off CL and plugged it in to update and it had the connection failure a couple of times and then poof nothing no vibration no boot screen nothing. The LG people tried getting me to do a hard reset and when that wouldn't work she told me I would have to send it in and that it was still under the manufacturers warranty. I was desperate to say the least so I tried all kinds of combinations. The key is to get your pc to recognize your phone while it is off. If you can do that with the battery in I would try it that way first. If you don't have the box you will need to copy down the phones info, (IMEI and S/N) which is under the battery, for the recovery phone part of the support tool. It worked for me so I hope you have some luck with it. Also I would consider waiting until the ghost call thing gets fixed before you go to gingerbread. If I had known I would have stayed with froyo until they fixed it.
Sent from my LG-P925 using Tapatalk 2

Ok I tried everything and it doesn't work. I now need to flash back to stock rOM using recovery. I need the file Thrill Stock ROM zip file and the link on forum about flash back to stock no longer working

I had the same thing happen to me. U hold down "volume down" and power button, when the phone is off and that will put it into android dfu mode. Now select factory reset and Press menu button.
Sent from my LG-P925 using xda app-developers app

Volume down for recovery and so on. Volume up for download from tool.
If your doing the recovery method that TheDarkLestat setup then your gonna need to do the software setup and drivers step by step. Assuming you have done that. Remove the battery then plug the USB in and quickly hold down the pwr, and vol UP till it vibrates then let go. Start the loader and place the battery back in while its doing its thing . Then don't touch it till its done.
Only simply way I can think of to repair a soft bricked thrill. As long as it loads to recovery or download then our phone Is fixable. You might be able to politely ask TDL to remote in and provide a fix. He was doing that for a lot of us for a while. Though if your not gonna donate for his time then don't bother lol.

Cab121 said:
Volume down for recovery and so on. Volume up for download from tool.
If your doing the recovery method that TheDarkLestat setup then your gonna need to do the software setup and drivers step by step. Assuming you have done that. Remove the battery then plug the USB in and quickly hold down the pwr, and vol UP till it vibrates then let go. Start the loader and place the battery back in while its doing its thing . Then don't touch it till its done.
Only simply way I can think of to repair a soft bricked thrill. As long as it loads to recovery or download then our phone Is fixable. You might be able to politely ask TDL to remote in and provide a fix. He was doing that for a lot of us for a while. Though if your not gonna donate for his time then don't bother lol.
Click to expand...
Click to collapse
I dont' ask for donations.
It's just courtesy.

KF Hd 7" stuck in start screen ( I am so freakin lost)

I know nothing of Bricking/Unbricking... Rooting or anything. I have been researching for 3 days now. I know as much now as I did then all of zip!! I cannot get past the on screen. I have done the 20 second poewr button push for up to 5 minutes. I have talked to Amazon support and have been told Im pretty much SOL. I miss my kinde and I am not ready to give up. I have seen others have appreared to be in worse situations with this issue than I am so I am hoping for some assistance.
Every time I look into KFU and understand it it doesnt download right. Almost everything says it cant work on my computer. I have downloaded several versions. I feel screwed. Is there hope for this? all the apps for unbricking and rooting that i have downloaded have been for nothing. I would really appreciate some mojo and super geek help please.
Lisa

OK I can help
korexeileithyia said:
I know nothing of Bricking/Unbricking... Rooting or anything. I have been researching for 3 days now. I know as much now as I did then all of zip!! I cannot get past the on screen. I have done the 20 second poewr button push for up to 5 minutes. I have talked to Amazon support and have been told Im pretty much SOL. I miss my kinde and I am not ready to give up. I have seen others have appreared to be in worse situations with this issue than I am so I am hoping for some assistance.
Every time I look into KFU and understand it it doesnt download right. Almost everything says it cant work on my computer. I have downloaded several versions. I feel screwed. Is there hope for this? all the apps for unbricking and rooting that i have downloaded have been for nothing. I would really appreciate some mojo and super geek help please.
Lisa
Click to expand...
Click to collapse
First try and put it into recovery by holding down the volume up until a screen comes up saying to reboot or restore. Also, give me some background info. on how the kindle stopped working.

Is a definite must do. I have an appt I have to leave for in a minute so as soon as I get home I will def take care of the background info and the volume up try. Thank you. I will most assuredly appreciate your help. :highfive:

korexeileithyia said:
Is a definite must do. I have an appt I have to leave for in a minute so as soon as I get home I will def take care of the background info and the volume up try. Thank you. I will most assuredly appreciate your help. :highfive:
Click to expand...
Click to collapse
No problem

catching up
Hi again... SO I did the volume up trick until my fingers started to shake. Nothing happened. I did it with the kindle attached to the computer and with out the usb tethered to anything. I did not try it straight off the wall plug tho. Nothing ....
Background. I have had the kindle less than a year. My 8 year old has been stealing it a lot the past few months trying it say is hers ;0 thats ok. Shes been playing games like bakery story Dragon story fashion world and temple run etc... she uses it for the calculator and reading programs. She also uses it for netflix. 5 days ago she watched netflix until the battery gave out. She plugged it in and waited a few minutes and it wasnt coming back in. She told me about it... I looked into everything I could think of. I tried everything I could find. I have downloaded (to my computer) a ton of root and unbricking programs. Nothing makes sense and everything says theres parameters missing. I called kindle. Support took me thru every step I had already tried (power button charging different ways killin the battery all the way doing different things etc) The only two things I see now are a huge battery in the middle of a black screen that has a very small red portion to it or the beginning screen that stays put with the words having the glowy part run across it over and over again... thats all I know for sure. IF theres any information you can help me with I would really appreciate it. Thank you.
Lisa

korexeileithyia said:
Hi again... SO I did the volume up trick until my fingers started to shake. Nothing happened. I did it with the kindle attached to the computer and with out the usb tethered to anything. I did not try it straight off the wall plug tho. Nothing ....
Background. I have had the kindle less than a year. My 8 year old has been stealing it a lot the past few months trying it say is hers ;0 thats ok. Shes been playing games like bakery story Dragon story fashion world and temple run etc... she uses it for the calculator and reading programs. She also uses it for netflix. 5 days ago she watched netflix until the battery gave out. She plugged it in and waited a few minutes and it wasnt coming back in. She told me about it... I looked into everything I could think of. I tried everything I could find. I have downloaded (to my computer) a ton of root and unbricking programs. Nothing makes sense and everything says theres parameters missing. I called kindle. Support took me thru every step I had already tried (power button charging different ways killin the battery all the way doing different things etc) The only two things I see now are a huge battery in the middle of a black screen that has a very small red portion to it or the beginning screen that stays put with the words having the glowy part run across it over and over again... thats all I know for sure. IF theres any information you can help me with I would really appreciate it. Thank you.
Lisa
Click to expand...
Click to collapse
You might need to get a factory cable. I have to get one because mine won't start up anymore either.

Hi lisa
First off Don't Panic!!! Been where you are about 2 months ago and couldn't/hadn't flashed/used from etc etc before in my life.. but my kfhd was stuffed but the sounds of things similar to you.
The volume up trick will only work once you have 2nd boot working btw.
Go to the 7' android development section of the kfhd forum and read a few threads around getting something called second boot loader.. it actually really simple and very simple to do (as long as you do follow it EXACTLY).. I did get a factory cable to assist this process, and you may need one as well, but I have read that several people have now worked out how to do it without. (Read all the thread about second boot loader there's a lot but its worth it) factory cables are only cheap at worst case..
I'm sure someone will direct you to exactly the link on the xda forum you need shortly, everyone was amazing when I initially stuffed up.keep smiling and as I said don't panic!!
Kgyuszko
Sent from my KFTT using xda app-developers app

Does your Kindle take a charge at all do you know or just always the same screens no matter how long you charge?

3 in one
1st querant Do you buy them on amazon? can i get one closer to home? Is there a price range I should look into?
2nd querant Ill look but be warned that my inner geek has had meltdowns over all of this. Its over my head. I just kinda bug eye and try not to get stupefied.
3rd querant No it will not charge at all.
Thank you all and please be patient with me.

I don`t know if the charging has the same issue as the first gen, it required a running system in order for the battery to charge if it ever became flat. Here`s my suggestion plug it to your pc for several hours set your computer to not sleep and leave it, if you get lucky it will eventually boot good luck. It should not need unbricking by the way.

korexeileithyia said:
1st querant Do you buy them on amazon? can i get one closer to home? Is there a price range I should look into?
2nd querant Ill look but be warned that my inner geek has had meltdowns over all of this. Its over my head. I just kinda bug eye and try not to get stupefied.
3rd querant No it will not charge at all.
Thank you all and please be patient with me.
Click to expand...
Click to collapse
If you have not done anything to the device to cause this ie: root, custom recovery, flashed anything, then it sounds like you just have a hardware problem. Something went wrong that should not have and would be covered under warranty. I WOULD NOT mess with anything involving root or a factory cable or 2nd bootloader. If you do not know what you are doing when it comes to those things then you could potentially do more harm than good. Did you buy it on amazon? You said you already called amazon, call them back, they will replace it, even if you didnt buy directly from them.. Sometimes the people that answer the phones for amazon are idiots. Just call until you get someone who is helpful. tell them exactly what happened, it died and won't come back on. Don't mention anything about root, factory cable, ect.. These devices havent even been out for a year so all of them are still under warranty unless you've root or installed custom recovery.

Could just be a defective charger ? did you try an alternative mains/usb wall charger, left plugged in with the kindle powered off ? it takes a long time to charge them from flat, mine was approx 12 hours Edit - A computors usb output isn't usually enough to push a charge in only keep the kindle "as is" when in use

onemeila said:
If you have not done anything to the device to cause this ie: root, custom recovery, flashed anything, then it sounds like you just have a hardware problem. Something went wrong that should not have and would be covered under warranty. I WOULD NOT mess with anything involving root or a factory cable or 2nd bootloader. If you do not know what you are doing when it comes to those things then you could potentially do more harm than good. Did you buy it on amazon? You said you already called amazon, call them back, they will replace it, even if you didnt buy directly from them.. Sometimes the people that answer the phones for amazon are idiots. Just call until you get someone who is helpful. tell them exactly what happened, it died and won't come back on. Don't mention anything about root, factory cable, ect.. These devices havent even been out for a year so all of them are still under warranty unless you've root or installed custom recovery.
Click to expand...
Click to collapse
wouldnt matter if I could root or unbrick it. My computer wont download the system operations for those properly. I did mention that I dont know how. and I did say that I dont understand what they are so I am not doing them. That I had tried the 20 second power button push all thw way up to 5 minutes on the usb to the computer and the wall as well as detached. Nothing worked. Its stuck and they wouldnt explain why. All I got was well sorry thats it we cant help you. *sigh* I have tried calling like 5 times. to no avail. Thanks tho.
I will be the first to say that unless I can figure something out I am not going to try it. My tablet is something I find as a MUST HAVE and I dont want to take any chances on ....

JohnFranklin said:
Could just be a defective charger ? did you try an alternative mains/usb wall charger, left plugged in with the kindle powered off ? it takes a long time to charge them from flat, mine was approx 12 hours Edit - A computors usb output isn't usually enough to push a charge in only keep the kindle "as is" when in use
Click to expand...
Click to collapse
Its possible because my son was using mine and his to charge his reg KF and it wasnt charging. He tried several alternates power choices on that as well. I have ordered the factory charger but I am going to want to understand everything about it before it gets here on sat. I am going to start researching it tonight when i get home.

Try...
korexeileithyia said:
Its possible because my son was using mine and his to charge his reg KF and it wasnt charging. He tried several alternates power choices on that as well. I have ordered the factory charger but I am going to want to understand everything about it before it gets here on sat. I am going to start researching it tonight when i get home.
Click to expand...
Click to collapse
Try testing the charge on a couple different power cords that are know to work and put it on one for 12hrs. Then if it couldn't charge I'll walk you through the steps of using a factory cable.

What kind of computer do you have. These things always work smother on a Windows machine (or Linux). Also did you ever install the drivers for your Kindle on the computer. Nothing will work properly unless you have the drivers on there. They should load automatically when you plug your kindle into the computer. If they don't, here is a thread where you can download the drivers http://forum.xda-developers.com/showthread.php?t=1890413 Just download and you can either unzip the file and use what's inside or just double click to install :good:

CVanB said:
Try testing the charge on a couple different power cords that are know to work and put it on one for 12hrs. Then if it couldn't charge I'll walk you through the steps of using a factory cable.
Click to expand...
Click to collapse
The Cable will be here Sat. I have tried the charging but will do so again... thank you

korexeileithyia said:
The Cable will be here Sat. I have tried the charging but will do so again... thank you
Click to expand...
Click to collapse
I dont mean to discourage and maybe it will work but the only thing a factory cable is used for is to put the device into fastboot so you can flash partition imgs or other programming features(the cable uses the fifth lead on a micro usb cable to activate fastboot). Even if it goes to fastboot your kindle is not bricked and and you would have no reason or need for fastboot. From what you've said you have not rooted or modified your device at all, there are only two possibilities of what is wrong with it at this point- the charger is bad or the charging port has gone bad. That box with the red bar about a 1/4 full just means the device doesnt have enough charge to power up. It happens all the time on mine and once I charge it for a couple minutes its fine. So your device is obviously not charging and I dont think a factory cable is going to change that. I just want you to have the right info and not go wasting your time and money trying things that are irrelevant to what is actually wrong with your device.

trying
have cable, still lost. Am trying to figure out what I need. Things wont load on the computer. I have a samsung RV515 laptop. I cant get the computer to recognize the muffed kindle. The fastboot screen does show up but then goes no further. It does need to show up on the computer so I can do more things with it. Not so much atm. I have the recommended linked .exe on the computer but it will not run as it says not everything is downloaded and I have to finish d/l it manually. I am not ready to give up but I wont do anything to screw it up more.
No it wont go past the 1/4th charge. I have left it on the charge for 24 hours and not getting further. Again I have seen people not even able to get to the front screen pull it back from the dead. So Im hoping.. thanks

You mean the exe that I linked you to doesn't work?
from my Viped out one x