I just bought the phone and using LGmobile update. It downloaded a file about 420mB and in the process update I got a message problem communicate with your phoneme. please disconnect take phone out etc.. and turn phone on and connect.
I follow the instruction but my phone won't turn on regardless to what I do.
Please help.
Sorry wrong paste..lol ..here is right info...
Check Device Manager for the current active "COM Ports"
Boot into DOWNLOAD MODE Plug the phone into the computer without the battery inserted Hold [VOL UP + POWER] Put the battery in and wait until it vibrates or for 3 seconds Check Device Manager for a NEW "COM Port...from dark lestat post in development... make sure to thank him
Then you should be able to re LG flash
Sent from my LG-P920 using xda premium
Keep having problem PC doesn't detect phone. Unplug, remove battery etc...so frustrated. Now everytime turn phone off I have to plug power cord in order for it to turn on. How do you do factory reset?
Give this thread a try ..follow exactly ....make sure battery has a charge and is not borked...these phones seem to have battery issues. If bat is good this is the info you want..seems like a lot of work but it is what worked for me. dark lestat is very knowledgable and helpful regarding these things. Hope this helps you..
Guess I should include link...lol.
http://forum.xda-developers.com/showthread.php?p=22417769
Sent from my LG-P920 using xda premium
Follow every step but got stuck when it trying to flash and stop at 20% just like when I update using LG software. Order new battery hope fixing the problem. My first LG android phone can't return bought it on craigslist
Hopefully the battery will help...good news is if you can connect and start the flash each time it is not bricked...i have not seen this problem posted before so doubt it is hardware...does adb see it...if so i would try to wipe system and data and reflash...i would also pull sim and sd card before flash to see if that helps ?
Sent from my LG-P920 using xda premium
Replace the battery with new and same problem, my phone doesn't even read my AT&T sim card.
Any button that I can do hard reset?
I had this same problem is your phone not turning on or just not downloading the update? I bricked my phone installing the update and it can be fixed but if you having problems with the connection during update you gotta keep trying it will go through. If it wont turn on at all there is a fix.
Sent from my LG-P925 using Tapatalk 2
This is the problem:
1. I bought new phone on Craigslist running 2.2 and everything working.
2. Connect to PC and set up driver, software etc.. there is an update so I did.
3. Got stuck about 17-20% and message disconnect and re-reconnect etc.. and I did.
4. Ever since I can't t urn it on unless connect to a charger.
5. I will not read SIM card and kept saying reorganized when check on setting and mobile network.
I am stuck here cause tried so many time. Also, phone turn off with full battery charge but next morning when I turn on completely drained. I think software screw up some how during the initial upgrade. Just don't know how to fix it
OK try this take your battery out and plug it into your computer and hold the volume down key until you hear or see your computer recognize it. It should beep a couple times. Be sure to leave your phone off this whole time. Open up your LG support tool. Once it says your connected open the customer support tab. Click on "Recovery Phone." Enter your phones info and click the check button. It should take you through the steps from there. I had the same problem and had also bought it from craigslist. The good news is even if this doesn't fix it, your phone is less than a year old and can be sent to LG for a fix or they'll send you a refurbished phone. They will want a reciept but if you don't have it just tell them you tossed it. Same for the box if you don't have that. They will do it just start getting angry if they give you the run around. I was freaking out just like you LOL. I couldn't find anything on the web and the LG lady was just as stumped as me... I just happened to try this before I sent it in and it worked. Let me know if you have any luck.
Sent from my LG-P925 using Tapatalk 2
As far as the update goes I eventually did get it to work. Just keep trying. I plugged it in to try again one time and it said my phone was already updated. I went and checked and sure enough it was. The visual change isn't dramatic your signal bars turn green and you get some more bloatware like a 3d game converter. The reason for this is the phone has a custom LG UI and will not adopt the gingerbread UI. Don't freak a lot of people insist its not GB but it is. There is a lot more to a OS than the user interface.
Sent from my LG-P925 using Tapatalk 2
Warranty thru LG or at&t? You mind give a little more. I didn't even know LG has a warranty in US?
Sent from my LT26i using xda premium
The warranty is through LG at&t wont do anything for you cause they will know you got it off CL. You'll need your imei and your s/n from under your battery. I wouldn't tell them you got it off CL. The only way this wont work is if the previous owner registered the phone with lg which is unlikely since they didn't even have the GB update. Call 18002430000. Again do not tell them you got it from CL. The phone is under a year old and they will do it for you. If it has to be told that it isn't yours say you had a step brother or friend give it to you. They will want a reciept but you can tell them you tossed it all and your imei Ans s/n will be enough. Also tell them it happened using their support tool. Good luck.
Sent from my LG-P925 using Tapatalk 2
PROlific666 said:
OK try this take your battery out and plug it into your computer and hold the volume down key until you hear or see your computer recognize it. It should beep a couple times. Be sure to leave your phone off this whole time. Open up your LG support tool. Once it says your connected open the customer support tab. Click on "Recovery Phone." Enter your phones info and click the check button. It should take you through the steps from there. I had the same problem and had also bought it from craigslist. The good news is even if this doesn't fix it, your phone is less than a year old and can be sent to LG for a fix or they'll send you a refurbished phone. They will want a reciept but if you don't have it just tell them you tossed it. Same for the box if you don't have that. They will do it just start getting angry if they give you the run around. I was freaking out just like you LOL. I couldn't find anything on the web and the LG lady was just as stumped as me... I just happened to try this before I sent it in and it worked. Let me know if you have any luck.
Sent from my LG-P925 using Tapatalk 2
Click to expand...
Click to collapse
I got panic and it's in local shop if they can repair it but will take it back and try. Thanks.. at least someone here tried to help me... the link flash back to stock ROM didn't work for down load so I can flash it. I even root and flash custom ROM still didn't work now I want to flash it back to stock... if you can just help me a little please
download mode: I got a little confused cause someone told me take battery out connect phone to PC and put battery back. Yours didn't mention anything about put battery back in
Yeah when I did mine it wouldn't turn on at all even when it was plugged in so I think i left my battery in and did it bc it wouldn't respond to anything. I would try to get it to recognize with the battery in but if it turns on after you do plug it in then it will need to be out. You can try to put the battery back in after the computer and the LG support tool recognizes your phone bc after it gets done it reboots. I'm not sure if the battery is needed for it to work but mine was in but you can try it multiple times with it in and out. I freaked out too I had just bought the phone off CL and plugged it in to update and it had the connection failure a couple of times and then poof nothing no vibration no boot screen nothing. The LG people tried getting me to do a hard reset and when that wouldn't work she told me I would have to send it in and that it was still under the manufacturers warranty. I was desperate to say the least so I tried all kinds of combinations. The key is to get your pc to recognize your phone while it is off. If you can do that with the battery in I would try it that way first. If you don't have the box you will need to copy down the phones info, (IMEI and S/N) which is under the battery, for the recovery phone part of the support tool. It worked for me so I hope you have some luck with it. Also I would consider waiting until the ghost call thing gets fixed before you go to gingerbread. If I had known I would have stayed with froyo until they fixed it.
Sent from my LG-P925 using Tapatalk 2
Ok I tried everything and it doesn't work. I now need to flash back to stock rOM using recovery. I need the file Thrill Stock ROM zip file and the link on forum about flash back to stock no longer working
I had the same thing happen to me. U hold down "volume down" and power button, when the phone is off and that will put it into android dfu mode. Now select factory reset and Press menu button.
Sent from my LG-P925 using xda app-developers app
Volume down for recovery and so on. Volume up for download from tool.
If your doing the recovery method that TheDarkLestat setup then your gonna need to do the software setup and drivers step by step. Assuming you have done that. Remove the battery then plug the USB in and quickly hold down the pwr, and vol UP till it vibrates then let go. Start the loader and place the battery back in while its doing its thing . Then don't touch it till its done.
Only simply way I can think of to repair a soft bricked thrill. As long as it loads to recovery or download then our phone Is fixable. You might be able to politely ask TDL to remote in and provide a fix. He was doing that for a lot of us for a while. Though if your not gonna donate for his time then don't bother lol.
Cab121 said:
Volume down for recovery and so on. Volume up for download from tool.
If your doing the recovery method that TheDarkLestat setup then your gonna need to do the software setup and drivers step by step. Assuming you have done that. Remove the battery then plug the USB in and quickly hold down the pwr, and vol UP till it vibrates then let go. Start the loader and place the battery back in while its doing its thing . Then don't touch it till its done.
Only simply way I can think of to repair a soft bricked thrill. As long as it loads to recovery or download then our phone Is fixable. You might be able to politely ask TDL to remote in and provide a fix. He was doing that for a lot of us for a while. Though if your not gonna donate for his time then don't bother lol.
Click to expand...
Click to collapse
I dont' ask for donations.
It's just courtesy.
Related
need alt ways to get into recovery other than adb and holding down the volume keys.
i bricked my captivate using the odin one click recovery going from the i900 rom to stock. odin had froze and i restarted trying again only to see the phone and computer screen.
sorry a bit frustrated ....ask all the questions u need
Here's what got me out of a jam...
mattonline said:
1) Remove the battery
2) Remove the SIM
3) Reinsert the battery
4) Run ODIN (Note: I am using Windows 7 Professional x64 so I ran ODIN in Administrator mode by right-clicking on the file in Explorer and choosing the 'Run As Administrator' option. I would suggest doing this to make sure you have no permissions issues with the program.)
5) Depress both the up and down volume buttons on the phone at the same time
6) While you are depressing both the up and down volume buttons, plug in the USB cable.
No need to depress the power button or do anything else. The phone should go right into Download mode with the little yellow construction guy.
Then ODIN will see the COM port you are connecting with and you can just click Start.
Click to expand...
Click to collapse
i know....i posted right under u in that thread
maybe some commands i can do in ubuntu
the odin thead has all the info you need...
this phone is not brickable
http://forum.xda-developers.com/showthread.php?t=731989
I'm not so sure that it's not brickable, I'm pretty sure I bricked mine...
I was trying to load the international galaxy s 2.2 rom using odin 3 and for some reason I got stuck in recovery mode and could do nothing (this was after it finished loading the rom). I couldn't make it go to the download mode. Anything I did just took me right back to recovery.
I'd really love to know what you guys would have done, I'm new to android the captivate is my first.
Thanks in advance for your input.
By the way, I was talking it through with a buddy and we came up with a possible cause. I was rooted when I tried loading the 2.2 rom. Would that have bricked it?
Sent from my SAMSUNG-SGH-I897 using XDA App
MikeyMike01 said:
Here's what got me out of a jam...
Click to expand...
Click to collapse
You just saved me from literally tearing out the little hair I have.
Odin is one tricky SOB.
Why can't Vibrant users be this helpful?
t0406peru said:
I'm not so sure that it's not brickable, I'm pretty sure I bricked mine...
I was trying to load the international galaxy s 2.2 rom using odin 3 and for some reason I got stuck in recovery mode and could do nothing (this was after it finished loading the rom). I couldn't make it go to the download mode. Anything I did just took me right back to recovery.
I'd really love to know what you guys would have done, I'm new to android the captivate is my first.
Thanks in advance for your input.
By the way, I was talking it through with a buddy and we came up with a possible cause. I was rooted when I tried loading the 2.2 rom. Would that have bricked it?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Make sure you have the phone plugged kn to usb before trying the power into dowload procedure.
Sent from my GT-I9000 using XDA App
brick no more
designgears said:
the odin thead has all the info you need...
this phone is not brickable
http://forum.xda-developers.com/showthread.php?t=731989
Click to expand...
Click to collapse
tru dat!
can i tell you how good god is?
so over at androidforums by djgibbsjr
his words....
i did the same thing thing initially, no big deal, battery pull and while the phone is off hold volume key and power, ...
GUYS.......all i needed to do was hold down the volume key not both
Yes, the buttons are different if you attempted to flash a Galaxy S rom, the typical button hold will not work.
designgears said:
Hey guys, if you are stuck on that phone+!+computer screen, do this to get into download mode!!
1. Take out your sim card, sd card, battery and open Odin3(you must open odin3 before you start or it won't flash. Do NOT put your sim or sd card back in).
2. Put the battery in.
3. Plug in USB. (the phone will power on to that screen)
4. Hold down both Volume keys, and then push power. Hold it and dont let go.
5. Wait for it to go black and return to that horrible screen.
6. When it goes black the 2nd time release power and keep holding the voldown and volup.
note: THE STUPID SCREEN IS NOW FIXED!!
Click to expand...
Click to collapse
that is EXACTLY what got my phone out of the certain brick situation i thought i was in this morning. i had been trying for hours, every combination imagineable from the vibrant/galaxy s forums. odin3 had shut down on me twice mid process so everything was SEVERELY screwed. i did that combination and the very first time it caught and installed now my phone works perfect. ended up sending designgears a donation based on that post alone. thanks dude!
naplesbill said:
Make sure you have the phone plugged kn to usb before trying the power into dowload procedure.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I did have my phone plugged into power when I was trying the button push combos.
I didn't, however, try holding down just the volume button so I can't know for sure if that could have worked.
Since I was within the 30 day window I just took it back to at&t and they gave me a new one. I'm too chicken to try loading the 2.2 rom again. I really want to, but I can't afford a $500 brick...
Sent from my SAMSUNG-SGH-I897 using XDA App
t0406peru said:
Since I was within the 30 day window I just took it back to at&t and they gave me a new one.
Click to expand...
Click to collapse
AT&T replaced it without question? Interesting...
Edit: Well, now that I think about it, the guy that sold me mine was pretty clueless about it. I had to show him how to remove the battery cover, despite the printed "ILLUSTRATED" instructions stuck to the cover.
There's going to be a lot of refurbished captivates hitting the market soon.
t0406peru said:
I did have my phone plugged into power when I was trying the button push combos.
I didn't, however, try holding down just the volume button so I can't know for sure if that could have worked.
Since I was within the 30 day window I just took it back to at&t and they gave me a new one. I'm too chicken to try loading the 2.2 rom again. I really want to, but I can't afford a $500 brick...
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
So, I didn't brick it... I did the same thing with my replacement phone but this time I was patient enough to actually figure out how to fix it.
Sent from my GT-I9000 using XDA App
So I can't get any button combo to work, and all I get is White AT&T screen (if unplugged) and a frozen loading screen(if plugged into usb). Any ideas?
I think I have the same problem.
Used Odin one click to flash stock rom and then tried to flash JH7, but had some troubles with odin when trying flashing... tried to reboot the phone by pulling out the battery and now I can't turn it on, just have an image on the screen: Phone has troubles with connecting to PC and that's it...
oh yeah, that helped me:
1. Remove battery & usb
2. Open odin.
3. Plug in usb.
4. Hold vol down.
5. Put battery in.
devitalized said:
AT&T replaced it without question? Interesting...
Edit: Well, now that I think about it, the guy that sold me mine was pretty clueless about it. I had to show him how to remove the battery cover, despite the printed "ILLUSTRATED" instructions stuck to the cover.
Click to expand...
Click to collapse
Me 2 about the battery cover! Lol they let just anybody work at these stores. All they know about these phones is what's printed on that little card. Every now and again you'll find someone that cares about their job as is on top of their game. But that's few and far between...
Sent from my SAMSUNG-SGH-I897 using XDA App
Bricked captivate
ok so i was running a devil kernel on jellybean 4.2 and for some strange reason the rom started acting funny and gave me a message saying i had to type in a password ti decrpyt storage even though i have no passwords on my samsung I897. So i decided to flash back to stock and start all over again from scratch using odin one click but in the middle of downloading my phone was disconnected and it gave me the bricked screen shortly after. Now i am unable to do anything on this phone ive tried pushing the volume buttons and taking the battery and sim card out while running odin 3 again trying to force it back into download but so far no progress has been made. If any one can help me it is much apprecitated.
The USB cord was removed from my phone in the middle of an Odin restore (it was stuck at factoryfs.rfs). Now the phone won't boot and it isn't recognized by my computer when plugged in. Did I find a way to brick this thing? Any help would be appreciated. This is my fourth Captivate and I'm sure AT&T is going to start to give me a hard time. Thanks.
build a jig or buy one on ebay. you need to get into download mode and reflash to sotck.
http://cgi.ebay.com/ws/eBayISAPI.dl...47234&ssPageName=STRK:MESELX:IT#ht_511wt_1139
http://forum.xda-developers.com/showthread.php?t=731989
Try all 3 methods to get into download mode first
yes, you can try the key combo first. but as i know, build 1010 or later wont work for the key combo.
Got it back to d/l mode. Now it's stuck at factoryfs.rfs-same as last time. I'm finished with this phone. AT&T can send me another. This is what happened to the past two phones. Stuck on a Odin restore and can't get it up again.
Edit: Just booted up. That's a relief. Thanks.
Thare187 said:
Got it back to d/l mode. Now it's stuck at factoryfs.rfs-same as last time. I'm finished with this phone. AT&T can send me another. This is what happened to the past two phones. Stuck on a Odin restore and can't get it up again.
Click to expand...
Click to collapse
If it had happened on more than one phone, you may consider looking at odin...maybe remove and reinstall our check your drivers or computer...just double check all of little stuff that might be so obvious that they are not obvious
********
Sent from my Samsung Captivate using the XDA app
ROM: Paragon RC5 1200 mhz/100hz kernel
so if your potentially bricking the phones, what do you tell AT&T that happened? and do they not ever check or whats the deal?
As far as I know at the wareenty centers they check for physical and water if they do attempt to boot as long as nothing looks custom they wont bother with checking the recovery or key combos samsung takes care of the rest they just want functional hardware..oh dont mention anything about modding. If anything syncing crashed is the best explaination. Tested.
Sent from my replaced cappy XD
Just dont become a familair face or it might get flaged on your account. Study up before doing somthing new. Just crashed my test cappy writing this had to stop and reflash heh live and learn.
A tech here on the forums said they can tell if it has been modified in just "3 clicks".
Sent from my SAMSUNG-SGH-IDK?
noobfail said:
A tech here on the forums said they can tell if it has been modified in just "3 clicks".
Sent from my SAMSUNG-SGH-IDK?
Click to expand...
Click to collapse
Lol....uh huh....i also have a direct line to the white house
********
Sent from my Samsung Captivate using the XDA app
ROM: Paragon RC5 1200 mhz/100hz kernel
Omg really?!
Sent from my SAMSUNG-SGH-IDK?
Just messin' around....what kind of tech? Att, samsung or other?
********
Sent from my Samsung Captivate using the XDA app
ROM: Paragon RC5 1200 mhz/100hz kernel
He said he was a manager of an actual at&t walk in tech support store.
I rooted a phone and flashed to stock and returned it with no problems.
Sent from my SAMSUNG-SGH-IDK?
Sorry I'm late getting back. My phone is up and running again. Got in to D/L mode and flashed back to stock. Got stuck on the AT&T logo, but used Odin one more time and it booted right up. The first time I brought in the phone, the tech took it to the display for 2 minutes and called the warranty dept for me. I think that it helped that the Chiefs playoff game was on. They didn't seem to want to be bothered! The phone rep asked about water and physical damage. No questions about modding. The second time I did it at home over the phone. Again, no questions about modding. I told the rep both times that I was trying to transfer music to the phone via Kies and it crapped out on me. It always help to play dumb and act like you don't know too much.
Thare187 said:
Sorry I'm late getting back. My phone is up and running again. Got in to D/L mode and flashed back to stock. Got stuck on the AT&T logo, but used Odin one more time and it booted right up. The first time I brought in the phone, the tech took it to the display for 2 minutes and called the warranty dept for me. I think that it helped that the Chiefs playoff game was on. They didn't seem to want to be bothered! The phone rep asked about water and physical damage. No questions about modding. The second time I did it at home over the phone. Again, no questions about modding. I told the rep both times that I was trying to transfer music to the phone via Kies and it crapped out on me. It always help to play dumb and act like you don't know too much.
Click to expand...
Click to collapse
I had the same exact problem when i was just starting to mess around with roms and my biggest issue was the sequence that it took to flash properly. i kept opening odin then putting my phone in download mode and THEN plugging it into use as opposed to how it should have been which is holding vol up and vol down pressed then plugging in usb.
bugity said:
I had the same exact problem when i was just starting to mess around with roms and my biggest issue was the sequence that it took to flash properly. i kept opening odin then putting my phone in download mode and THEN plugging it into use as opposed to how it should have been which is holding vol up and vol down pressed then plugging in usb.
Click to expand...
Click to collapse
That's the weird thing. I'm somewhat new, but have been flashing my Captivate since Sept. When the original Cognition came out I was flashing daily. I think my problem was, it took longer than usual to flash to stock, I got impatient and didn't realize I could get to D/L mode by taking the battery out, holding power and inserting battery. I always used the button combo. Live and learn.
same problem
Ok i have the same problem as the original post stated, running odin and disconnected right at the beginning of the rom flash! this phone wont power up, and my jig (which i have used before) will not work! Is it done for!?
Ur last hope lays in adams Am I bricked thread, where u'll find an app that checks what state ur phone is in (linux or ubuntu needed)
nevermind, I tried harder and the jig worked, its one of the homemade jigs, where you cut up your charger, and use resistors to create the circut . . . . jankety but i got it to work thanks anyway though
Glad you got it, but I would buy a jig and keep it in a drawer. Just in case.
Please i need help with my samsung captivate, i've gone through various post and thread in all forum pertaining 2 soft brick or hard brick. But i don't what i can call my own because all i get when i try booting the device in various mode is white display at times with several colour doting display or fading display with several color, whenever i try boot in download mode it displays the white with several colour and at my computer i get gadget driver installation succesful then d phone power off and on which i hear disconnection n connection sound from my pc. so it keep repeat d same thing. pls help how can i fix this. i need genuine solution.... thks
What were you doing before it bricked? ie. Were you flashing something, using it to hammer nails, or mixed it up for soap in the shower?
Sent from my cm_tenderloin using xda premium
-SGA- said:
What were you doing before it bricked? ie. Were you flashing something, using it to hammer nails, or mixed it up for soap in the shower?
Sent from my cm_tenderloin using xda premium
Click to expand...
Click to collapse
I wanted to install cm-9-20120804-NIGHTLY-captivatemtd on the device. Actual the installation was successful then when i was trying to restore my backup. it now stoped in d process of installing boot sector. after which remove the battery to start again. that was when it started showing that. actuall when i press power to on it doesn't respond but it only show the display when i plug my charger or usb to computer.
I had exactly the same problem. Use a program called one-click unbrick, that will get your phone back into download mode. After that you can use odin to restore stock. Watch out though, I was very happy when this all worked and I booted into stock only to find out that restarting the phone would brick my phone even worse than it was before. Now the computer wont even pick it up at all and it is stuck in a white at&t bootloop screen when I turn it on. When it is plugged in, all I get is a grey battery that isnt charging and it will not go into download mode. I don't know what I did wrong so I cant tell you how to prevent this problem so just be careful.
A jig would likely be your best option to force your phone in download mode.
If you haven't tried it already, try flashing a stock rom using Heimdall. I've had much better luck using that program than Odin with my own phone.
droyd666 said:
I had exactly the same problem. Use a program called one-click unbrick, that will get your phone back into download mode. After that you can use odin to restore stock. Watch out though, I was very happy when this all worked and I booted into stock only to find out that restarting the phone would brick my phone even worse than it was before. Now the computer wont even pick it up at all and it is stuck in a white at&t bootloop screen when I turn it on. When it is plugged in, all I get is a grey battery that isnt charging and it will not go into download mode. I don't know what I did wrong so I cant tell you how to prevent this problem so just be careful.
Click to expand...
Click to collapse
droy... The problem you're describing is exactly what happened to the first cappy I had, fortunately for me, I did it within a week of getting the phone.... I took it to an AT&T service center *aaack*, they were nice enough to tell me that there was nothing they could do and that I should be able to get it sent back in. Fortunately for me, it was right around the time when the 2.3.5 stock update came out and there were a few other people that were having somewhat similar problems. To try and fix it, I tried the jig, which I constructed myself only, ran the meter tests and found out that it didn't work after trying 3 different ones. I sent it back and got another, fortunately, I haven't ran into the issue again, so I think it may just be some kind of fault on the board given that I've never read of anyone else until now running into the problem
Thanks youall, gr8 help
So I was flashing my OB with a newly rooted verion of 20i using the auto root tool and began flashing it. I've done this before many times without issue. This time part way through it stopped and eventually I got an error saying it had timed out. When I pulled the plug and plugged it back into the OB to try again, it won't go into sw upgrade mode. It won't do anything. Even if I try to power it on using my batter, charger etc...nothing.
Did I fry the OB?? I think I made the mistake of not having the right files for the CP and AP bin selections (backwards) but I can't imagine I fried it?
stellar_d said:
So I was flashing my OB with a newly rooted verion of 20i using the auto root tool and began flashing it. I've done this before many times without issue. This time part way through it stopped and eventually I got an error saying it had timed out. When I pulled the plug and plugged it back into the OB to try again, it won't go into sw upgrade mode. It won't do anything. Even if I try to power it on using my batter, charger etc...nothing.
Did I fry the OB?? I think I made the mistake of not having the right files for the CP and AP bin selections (backwards) but I can't imagine I fried it?
Click to expand...
Click to collapse
Auto root tool? Do you mean smartflash tool? If your referring to smartflash tool, it happened to me before. After flashing 4 times a got an error and saying i had a time out. What i did is just turn off the phone and leave it for an hour maybe 10hrs After that try to turn on the phone or try to flash again. If you have problem entering sw upgrade mode try to hold the volume up a little bit longer like 1 minute until it enter sw upgrade.
Mr. Dimples said:
Auto root tool? Do you mean smartflash tool? If your referring to smartflash tool, it happened to me before. After flashing 4 times a got an error and saying i had a time out. What i did is just turn off the phone and leave it for an hour maybe 10hrs After that try to turn on the phone or try to flash again. If you have problem entering sw upgrade mode try to hold the volume up a little bit longer like 1 minute until it enter sw upgrade.
Click to expand...
Click to collapse
Yeah it was the smartflash tool, after rooting with the rom converter.
When you left it, did you leave the battery in or out? Plugged in?
I just pull out the battery and leave it for an hour. The error indicate time out so be patient and take some rest.
Sent from my LG-P970 using xda app-developers app
Mr. Dimples said:
I just pull out the battery and leave it for an hour. The error indicate time out so be patient and take some rest.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
There is nothing displayed on the OB. The timeout was with the smartflash tool on my PC. I've left the phone empty for an hour and tried plugging in. Nothing. I think she's hooped.
stellar_d said:
There is nothing displayed on the OB. The timeout was with the smartflash tool on my PC. I've left the phone empty for an hour and tried plugging in. Nothing. I think she's hooped.
Click to expand...
Click to collapse
Yeah the timeout was with the smartflashtool it happened to me and just like what i said before i pull out the battery and i leave it for an hour then i flash rom again using smartflashtool. Try this hold volume up( keep holding even it takes 1 minute just hold it) then connect it to the pc using usb. Keep holding volume up until it enter sw upgrade mode. I have a case sometimes that it takes 30 secs to enter sw upgrade. In case you enter sw upgrade and you flash rom check also if you still have battery left on your phone. Don't unplug it quickly just take some time to charge the phone. If this method did'nt help you, I think you need to go to lg service center. But before that try your best and look for all possible solution to your problem.
Sent from my LG-P970 using xda app-developers app
Mr. Dimples said:
Yeah the timeout was with the smartflashtool it happened to me and just like what i said before i pull out the battery and i leave it for an hour then i flash rom again using smartflashtool. Try this hold volume up( keep holding even it takes 1 minute just hold it) then connect it to the pc using usb. Keep holding volume up until it enter sw upgrade mode. I have a case sometimes that it takes 30 secs to enter sw upgrade. In case you enter sw upgrade and you flash rom check also if you still have battery left on your phone. Don't unplug it quickly just take some time to charge the phone. If this method did'nt help you, I think you need to go to lg service center. But before that try your best and look for all possible solution to your problem.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Doesn't look like its going to work. The PC won't see it and it won't turn on. Tried a few different computers too. I'll leave it overnight with the battery out but likely it'll be shipped out tomorrow for repair.
I have to say, after just shy of a year of ownership with this thing, this is the first phone to pile up on me like this. Yet another reason why I'll never buy LG again. (Oh and their refrigerators SUCK too!)
GOOD NEWS! My replacement phone came in today!!!
BETTER NEWS!!! It's a Galaxy S2X and I'm putting a modded ICS for my carrier on it as we speak! Far better phone, and way more support.
Thanks to devs for your hard work here. Sorry there were so many tools asking for ETA's. I hope there are less foolish people in the Galaxy thread.
Peace
Lucky you!!!
I must try that trick and fry my phone too.
Really hard on the devs trying to fix stuff without full source code and drivers available. I am on the verge of swapping my ob plus some money for s3 right now, will wait until September but that will be the end of it.
ogremount said:
Lucky you!!!
I must try that trick and fry my phone too.
Really hard on the devs trying to fix stuff without full source code and drivers available. I am on the verge of swapping my ob plus some money for s3 right now, will wait until September but that will be the end of it.
Click to expand...
Click to collapse
Do it!
I can't believe what a difference this "comparable phone" is. I'm getting like 6400+ scores on antutu just stock. Soooo many north american roms to choose from too! very excited.This should have been my original purchase.
LG NO MORE!
I hope someone can help me here, I'm posting with the belief that this may be a simple enough problem (With the hope).
I tried to install a Custom Recovery on my Galaxy S using this tutorial - wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
I managed to get to step 6, and a blue bar appeared, but then i could not do step 7.
Now i cannot boot into recovery mode, nor will the phone boot past the Samsung Galaxy S logo.
I can still get into download mode, but Odin does not detect the phone.
. I have changed cable and tried different versions of Odin..
When i turn on the phone normally it shows the Samsung Galaxy S logo, blinks, and then reboots and does the same.
When i try to enter recovery, i get the same, unless i connect it to the PC. I then get an 8 pointed star, like the loading flash circle thing - the same as a flash video loading except it does not move.
I have also removed the battery and tried to enter recovery and download mode while inserting the battery.
I have removed the SIM and battery for a few minutes.
when i try to start Zadig, with the phone connected in Download mode, i get "Gadget Serial" as the device connected. I used to get "Samsung USB Composite Device"
I have tried many different things and read over the recommended threads on this forum. I think i need a bit more pointing in the right direction.
I really hope somebody can help me. I am very worried that i may have bricked it.
Thank you.
Try this:
This feature is great for people who
a) Have a bad KIES flash
b) Stuff up their phone somehow
c) Accidentally flash something dodgy via ODIN
d) Some other random occurence
To test this feature you just need to start with your phone turned off... Best way to be sure is to remove the battery.
Then
1. Put battery back in
2. Press and hold Volume Up + Home Key
3. Continue holding those buttons and then press and hold power button.
4. When you see the logo pop up release power button ONLY
5. Keep holding two buttons from step 2 until you enter recovery mode.
I hope this helps?
Also have you tried everything on this thread:
http://forum.xda-developers.com/showthread.php?t=1134975
akash6969 said:
Try this:
This feature is great for people who
a) Have a bad KIES flash
b) Stuff up their phone somehow
c) Accidentally flash something dodgy via ODIN
d) Some other random occurence
To test this feature you just need to start with your phone turned off... Best way to be sure is to remove the battery.
Then
1. Put battery back in
2. Press and hold Volume Up + Home Key
3. Continue holding those buttons and then press and hold power button.
4. When you see the logo pop up release power button ONLY
5. Keep holding two buttons from step 2 until you enter recovery mode.
I hope this helps?
Also have you tried everything on this thread:
http://forum.xda-developers.com/showthread.php?t=1134975
Click to expand...
Click to collapse
I hadn't seen that thread, but i have gone over tons of them Thanks for reply.
I eventually got Odin to detect it and I tried this - http://forum.xda-developers.com/showthread.php?t=1544487
It came up red and said failed.
I closed odin and disconnected the phone. Now i can't even turn it on.. Nothing. I am hoping the battery died, and it's a coincidence..
No response at all to any buttons... I haven't done anything else.
If i can get it to power up again, i'll try those tips.
Tomato_Jam said:
I hadn't seen that thread, but i have gone over tons of them Thanks for reply.
I eventually got Odin to detect it and I tried this - http://forum.xda-developers.com/showthread.php?t=1544487
It came up red and said failed.
I closed odin and disconnected the phone. Now i can't even turn it on.. Nothing. I am hoping the battery died, and it's a coincidence..
No response at all to any buttons... I haven't done anything else.
If i can get it to power up again, i'll try those tips.
Click to expand...
Click to collapse
Ok, Don't worry, Charge your phone battery to 100%, leave over night. ( keep charger connected to your phone overnight)
Best to have a fully charged battery in these situations!
Keep calm, and read and prepare what you want to do next.. Don't try everything in a frantic effort to get your phone started again.
I know it's difficult, but there are lots of threads on how to rectify most problems.
I wish you Good luck!!
sorry to ask some stupid question, but can u make sure what versiom ur fone is?
is it i9000?, or i9001 or i9003? or korean anycall? as far as i know, flashing i9000 ROM to i9003 will hardbrick da device.
Sent from my GT-I9000 using xda premium
akash6969 said:
Ok, Don't worry, Charge your phone battery to 100%, leave over night. ( keep charger connected to your phone overnight)
Best to have a fully charged battery in these situations!
Keep calm, and read and prepare what you want to do next.. Don't try everything in a frantic effort to get your phone started again.
I know it's difficult, but there are lots of threads on how to rectify most problems.
I wish you Good luck!!
Click to expand...
Click to collapse
Thanks.
This is a disaster. I tried to power it on to any mode there before i saw your post.
I needed to update the phone, because an app i needed for studying was only available on Android 4+.
Now no phone..
I saw a few threads, i hope after i leave it overnight i'll be able to power it.
If not, probably a JIG?
I don't fancy making one, but if i have to, i guess i'll give it a try. I don't think i could wait a week or more for a premade one to be delivered.
Anyway, for now, i'll keep my fingers crossed.
Thanks for help/tips and reply.
I'll post back tomorrow, hopefully with some better news.
Tomato_Jam said:
Thanks.
This is a disaster. I tried to power it on to any mode there before i saw your post.
I needed to update the phone, because an app i needed for studying was only available on Android 4+.
Now no phone..
I saw a few threads, i hope after i leave it overnight i'll be able to power it.
If not, probably a JIG?
I don't fancy making one, but if i have to, i guess i'll give it a try. I don't think i could wait a week or more for a premade one to be delivered.
Anyway, for now, i'll keep my fingers crossed.
Thanks for help/tips and reply.
I'll post back tomorrow, hopefully with some better news.
Click to expand...
Click to collapse
Sorry to say, most likely you will need a USB JIg to fix the problem you have. :/
If you linked the correct page when you said you tried to do this- and if I opened the correct page, that takes you to an SII section. Those are SII firmwares, not for the S.
So as compacity said, please clarify what device you have... Whether its an I9000 (galaxysmtd is for the I9000) or an I9100 (the firmware page you linked). If you do have an I9000, then your brick comes from flashing a different device's rom onto the S, which would give this error in Odin beause its incompatible.
In this case, you'd probably need a USB Jig to come out of it.
Try what the others said and hopefully you'll be at least able to enter Download mode before resorting to a jig, but considering your situation, I have to say realistically a jig is your best bet :/
Sent from my GT-P7510 using Tapatalk HD
You need a usb jig. It will get you into download mode. Now you need to flash cf root, which will come with cwm recovery. Recovery mode should work now. If you get computer!phone, then re-flash cf root. Now you should be able to flash CyanogenMod via cwm recovery. Thank if I helped!
Sent from my GT-I9000 using cm10.1
Soryuu said:
Sorry to say, most likely you will need a USB JIg to fix the problem you have. :/
If you linked the correct page when you said you tried to do this- and if I opened the correct page, that takes you to an SII section. Those are SII firmwares, not for the S.
So as compacity said, please clarify what device you have... Whether its an I9000 (galaxysmtd is for the I9000) or an I9100 (the firmware page you linked). If you do have an I9000, then your brick comes from flashing a different device's rom onto the S, which would give this error in Odin beause its incompatible.
In this case, you'd probably need a USB Jig to come out of it.
Try what the others said and hopefully you'll be at least able to enter Download mode before resorting to a jig, but considering your situation, I have to say realistically a jig is your best bet :/
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
huskyT said:
You need a usb jig. It will get you into download mode. Now you need to flash cf root, which will come with cwm recovery. Recovery mode should work now. If you get computer!phone, then re-flash cf root. Now you should be able to flash CyanogenMod via cwm recovery. Thank if I helped!
Sent from my GT-I9000 using cm10.1
Click to expand...
Click to collapse
Both helped a lot, thanks.
I had to end up bringing the phone to a repair shop
Something i am not inclined to do if i can avoid it. Especially if i caused it, i would hope i could undo it. But because i need a jig, and i wouldn't have time to get one or make one before Monday, i had to bring it to someone else.
I am buying the materials for a jig, and maybe going to buy one also, for future.
@Soryuu - Yep, i linked to the page, so i must have flashed the wrong firmware.
I'm angry with myself because i read everything else carefully. I had been reading all day. I guess i was just tired and thought I had got to the final hurdle. I was careless.
@huskyT - Thanks, will know that for future reference. I have two old Android phones somewhere. One is a Galaxy Europa, and one is an LG (not sure what model). Both are borked in some way, but i could probably use them for practice. I think the Galaxy Europa is flashed badly. Not by me. (Thankfully).
Tomato_Jam said:
Both helped a lot, thanks.
I had to end up bringing the phone to a repair shop
Something i am not inclined to do if i can avoid it. Especially if i caused it, i would hope i could undo it. But because i need a jig, and i wouldn't have time to get one or make one before Monday, i had to bring it to someone else.
I am buying the materials for a jig, and maybe going to buy one also, for future.
@Soryuu - Yep, i linked to the page, so i must have flashed the wrong firmware.
I'm angry with myself because i read everything else carefully. I had been reading all day. I guess i was just tired and thought I had got to the final hurdle. I was careless.
@huskyT - Thanks, will know that for future reference. I have two old Android phones somewhere. One is a Galaxy Europa, and one is an LG (not sure what model). Both are borked in some way, but i could probably use them for practice. I think the Galaxy Europa is flashed badly. Not by me. (Thankfully).
Click to expand...
Click to collapse
Don't stress mate, we all have bad days, we all make mistakes
Sent from my GT-P7510 using Tapatalk HD
Well....
I would have been quicker if i had ordered a jig and done it myself.. (Worth mentioning, i had told guy in phone shop what happened, and about the required "jig")
I collected my phone from the shop today, after a week, and i was told "Your phone is f*****d". To which i replied, "what? are you sure, i mean, i have only flashed it with SGS2 firmware, i'm under the impression it is very hard to break/brick, if i have a jig."
He told me, "Nope, it's beyond repair, it won't work. If you want, i can use the screen and other parts, i'll buy it off you for €40"
No thanks.
So now i am on the lookout for a premade jig. Does anybody know where i can buy one?
I meant to last week, but things happened, and without a phone i was running around a bit...
I'm going to check ebay, but if somebody could recommend somebody reliable, i'd prefer that. Thanks.
I bought it from ebay, no problem...but just saw a couple of minutes ago that also on amazon germany these jigs are offered now/in the meantime....
rodman01 said:
I bought it from ebay, no problem...but just saw a couple of minutes ago that also on amazon germany these jigs are offered now/in the meantime....
Click to expand...
Click to collapse
Thanks.
I bought a jig, and it arrived today. Have phone in charger.
Do i just plug the jig in?
Or do i also do the three button press?
The screen is completely black, and nothing appears on it.
only plug the jig in, thats all... phone will start in download mode of its own. :fingers-crossed: :fingers-crossed:
rodman01 said:
only plug the jig in, thats all... phone will start in download mode of its own. :fingers-crossed: :fingers-crossed:
Click to expand...
Click to collapse
Thanks, going to leave it charging for a little longer, and try it.
If it doesn't work, would a motherboard for the Samsung Galaxy S be easy to replace? I have found one unlocked for €25.
EDIT
Found a tear down video here - http://www.youtube.com/watch?v=vxPWsLd05F4
yes thats not so difficult...only thing a bit complicated is to open the back or middle cover...but there are a few movies on youtupe where you can see how it can be opened and dismounted....btw for the first try with the jig battery has not to be that full...only if it starts in download mode and you can flash it via odin I would recommend to charge it complete.
rodman01 said:
yes thats not so difficult...only thing a bit complicated is to open the back or middle cover...but there are a few movies on youtupe where you can see how it can be opened and dismounted....btw for the first try with the jig battery has not to be that full...only if it starts in download mode and you can flash it via odin I would recommend to charge it complete.
Click to expand...
Click to collapse
Thanks again.
I am after removing it from the charger, and inserted the jig. It's in about 30 seconds now, and nothing is happening..
that sounds not good...ususaly it takes only a few seconds or perhaps a minute till it starts to download mode....sorry for no better news....
rodman01 said:
that sounds not good...ususaly it takes only a few seconds or perhaps a minute till it starts to download mode....sorry for no better news....
Click to expand...
Click to collapse
What seems to have happened, is i tried to flash it with SGS2 rom. So is it unbrickable?
I am not sure but I think that minimum the bootloader is damaged...there is one more possibility: to repair it via jtag...but for this you have to find someone, who ones one and can repair it....some of the guys don't take much money for such a repair, but with transport costs ets...perhaps it would be cheaper and faster if you take the new mainboard you mentioned.