Related
Okay long story short. I flashed to phoenix rom from cognition 2.2 rom with cwm. Now i can't even odin back to 2.1. Every time i insert the battery the phone turns on itself. Please help me I have tried to go to download mode , recovery mode. it just sits at the at&t screeen
anyone help please!!
Hi Matt. I'm pretty sure you're not bricked, but you are at a point that might give you a little difficulty getting into download mode. Try the following:
Download Mode
You don't need to be at a "phone> ! <computer" screen to do this either, though you might need to try it a few times.
If you have the Android SDK installed you can type:
adb reboot download
To have it switch to download mode. If you don't have the Android SDK installed you can search the forums for directions or I'll post back later with how to install it.
Another option, of course, would be to create a jig or buying one pre-made. I don't believe you're at this point yet.
If those methods don't work...
Pull your Sim Card, Battery, and any External SDCard
Turn on Odin
Plug your Phone back into the USB Cable (battery out still)
While holding down the Volume +/- Button - put your battery back in.
It should go into DOWNLOAD MODE.
If you get the Gray Battery Charge screen - it didnt work. Rinse and Repeat until it goes into the DOWNLOAD MODE. Might take a few tries.
avgjoegeek said:
If those methods don't work...
Pull your Sim Card, Battery, and any External SDCard
Turn on Odin
Plug your Phone back into the USB Cable (battery out still)
While holding down the Volume +/- Button - put your battery back in.
It should go into DOWNLOAD MODE.
If you get the Gray Battery Charge screen - it didnt work. Rinse and Repeat until it goes into the DOWNLOAD MODE. Might take a few tries.
Click to expand...
Click to collapse
I just tried this method and made a video of how i failed lol i'll post it here once it's uploaded
lol... I take it that it didn't work? It is a pita to get it to work .. but it should work.
avgjoegeek said:
lol... I take it that it didn't work? It is a pita to get it to work .. but it should work.
Click to expand...
Click to collapse
here is the link to my video. see if you can find out how to get to download mode.
http://www.youtube.com/watch?v=i09jBM7did8
Try leaving it alone for a couple of minutes. The try again. Other wise I suggest a jig
Sent from my SGH-I897 using XDA App
mcord11758 said:
Try leaving it alone for a couple of minutes. The try again. Other wise I suggest a jig
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
I left the battery out before i went to sleep. that is about a good 6-7 hrs.. i made the video when i got up this morning. i put the battery in and it still turns on by itself
Maybe try this
http://m.youtube.com/#/watch?deskto...e.com/watch?v=D0aoabVtPJ8&v=D0aoabVtPJ8&gl=US
Sent from my SGH-I897 using XDA App
Try holding both volume buttons and put the battery in.
No USB or anything.
MikeyMike01 said:
Try holding both volume buttons and put the battery in.
No USB or anything.
Click to expand...
Click to collapse
no luck
matt0323 said:
no luck
Click to expand...
Click to collapse
Have you tried the jig
Sent from me
mcord11758 said:
Have you tried the jig
Sent from me
Click to expand...
Click to collapse
How would it help? My phone turns on itself once i put the battery in..
I watched your video - thanks for posting it
Ok - I have never seen that happen before. But... unfortunately I think your phone truly is bricked.
I mean it looks like it isn't getting past the "boot loader" (sorry not a dev so the technical term might be a little different.) to even allow you to get to a recovery mode.
So unless MikeyMike or some other dev has some way for you to re-write the sbl.bin file to allow your phone to boot - it's pooched
avgjoegeek said:
I watched your video - thanks for posting it
Ok - I have never seen that happen before. But... unfortunately I think your phone truly is bricked.
I mean it looks like it isn't getting past the "boot loader" (sorry not a dev so the technical term might be a little different.) to even allow you to get to a recovery mode.
So unless MikeyMike or some other dev has some way for you to re-write the sbl.bin file to allow your phone to boot - it's pooched
Click to expand...
Click to collapse
so not even a jig would fix this?!!
Doesn't appear so - It won't get past the AT&T screen... does your computer even recognize the phone when it's plugged in?
I don't think it is booting up enough for you to get to the recovery menus... so sounds like the sbl.bin is corrupted - which unfort is a true brick.
But you could try the Jig as it is pretty inexpensive. Post here to let us know if it worked or not.
avgjoegeek said:
Doesn't appear so - It won't get past the AT&T screen... does your computer even recognize the phone when it's plugged in?
I don't think it is booting up enough for you to get to the recovery menus... so sounds like the sbl.bin is corrupted - which unfort is a true brick.
But you could try the Jig as it is pretty inexpensive. Post here to let us know if it worked or not.
Click to expand...
Click to collapse
the usb doesn't read the phone when it is plugged in. It says unable to read, malfunction. but it does charge. weird thing is it still say its charging when i pull the usb out
lol thats just a residual electricity in the phone that is still being discharged after you unplug it... kinda like static electricity and a light bulb.
But.. I would still try the jig as a last ditch effort - it is possible that it would work...
This is why we flash to stock and THEN flash custom roms, kids
Sent from my SGH-I897 using XDA App
Here is what I've tried so far:
1- SuperOneClick. The program hangs at a step where it reads "Check if rooted : false"
2- Galaxy One Click Root. Program is responsive but it stops at "* daemon started successfully *" and does nothing from there.
3- Copying the "update.zip" file to the root of my internal SD card. I'm greeted by a "E: Signature verification failed. Installation aborted" error.
All remediable steps to fix one or all problems REQUIRES root, so i'm in limbo here. I honestly am about to cry. This seemed a hell of a lot easier when I read about it...
Well, what's left here for me to do? I'm lost. I read so many threads here I honestly can't do it anymore. This is my last resort.
This phone is all stock, AT&T Captivate.
Sorry if this is the wrong section of this forum... New here.
Flash your phone via Odin to jf6 stock then try superoneclick
Sent from my SPH-D710 using XDA App
hold up on that flash back. It oculd cause you to loop. Try using SOC v1.9 or lower. Also make sure your computer has all the required updates installed.
So this developed into a new, bigger, problem. I tried THIS guide to flash cyanogenmod (latest) but, guess what, the freaking thing hanged. So I was left with the only option, severing the link between PC and phone, and rebooting the phone.
I get this "phone - attention sign - computer" image. I think to myself "oh sh#&, I bricked the phone" so I rebooted it once again and to my surprise, the phone won't turn on. Won't react to the usb cable (can't boot to download mode), won't react to wall charger, won't turn on with the power button.
The battery was almost full...
What the heck is going on!?!? I had this phone for 3 days and I already ruined it?
I wan't to kill myself
leandroab said:
So this developed into a new, bigger, problem. I tried THIS guide to flash cyanogenmod (latest) but, guess what, the freaking thing hanged. So I was left with the only option, severing the link between PC and phone, and rebooting the phone.
I get this "phone - attention sign - computer" image. I think to myself "oh sh#&, I bricked the phone" so I rebooted it once again and to my surprise, the phone won't turn on. Won't react to the usb cable (can't boot to download mode), won't react to wall charger, won't turn on with the power button.
The battery was almost full...
What the heck is going on!?!? I had this phone for 3 days and I already ruined it?
I wan't to kill myself
Click to expand...
Click to collapse
Unfortunately, it doesn't sound promising. Even if you have a black screen, I would still try to access DL mode with Odin open (pull battery, remove sim, put battery back in, hold both volume buttons and insert the USB cord, don't touch the power button). If you get a yellow com light in Odin, even if the screen stays black, you're in download mode. If that doesn't work, you could try a jig and then see if Odin recognizes it. If neither of those work, you'll need to send your phone out to someone like Adam Outler to have it unbricked.
I get nothing with Odin. I can't believe I bricked my phone like that. I thought I would get an error screen at least. But this is outrageous. It's like the phone shorted and fried from the inside.
All I can say is wow... My happiness of a new phone turned to ashes in 30 seconds. Nice waste of money.
If you buy a USB download jig it will get you out of soft brick situations and if Odin fails try heimindal
Sent from my SPH-D710 using XDA App
leandroab said:
I get nothing with Odin. I can't believe I bricked my phone like that. I thought I would get an error screen at least. But this is outrageous. It's like the phone shorted and fried from the inside.
All I can say is wow... My happiness of a new phone turned to ashes in 30 seconds. Nice waste of money.
Click to expand...
Click to collapse
It didn't fry, it failed while flashing bootloaders. The bootloaders are what tell your phone what to do when you press power. Mismatched bootloaders = hard brick = no power up.
I would still try a jig, but if that doesn't work send a message to AdamOutler. He can give you the details of getting it unbricked.
MJHawaii said:
If you buy a USB download jig it will get you out of soft brick situations and if Odin fails try heimindal
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
Considering the flashing hanged at the very beggining, I'm 90% sure it HARD-bricked my device. A jig wouldn't work and I'm left with a very fancy paperweight.
There is NO power on whatsoever.
My luck is amazing, isn't it?
Please, someone tell me there is still hope (there isn't probably)
apbthe3 said:
It didn't fry, it failed while flashing bootloaders. The bootloaders are what tell your phone what to do when you press power. Mismatched bootloaders = hard brick = no power up.
I would still try a jig, but if that doesn't work send a message to AdamOutler. He can give you the details of getting it unbricked.
Click to expand...
Click to collapse
Exactly. I figured
I have no idea of who "AdamOutler" is. But I'll find out. :/
FML
leandroab said:
Considering the flashing hanged at the very beggining, I'm 90% sure it HARD-bricked my device. A jig wouldn't work and I'm left with a very fancy paperweight.
There is NO power on whatsoever.
My luck is amazing, isn't it?
Please, someone tell me there is still hope (there isn't probably)
FML
Click to expand...
Click to collapse
I suspect you are correct about the hard brick, but I would still try a jig. I had a failure flashing bootloaders once that killed my cappy, but though a stroke of fortune a jig still worked for me. You can build one for a couple of bucks of parts from Radio Shack, you've got nothing to lose. If not, it can be repaired.
Before you start looking at all that, make sure you are hard bricked. Easiest way is to use Linux Mode Detector. Use the link below labeled Captivate sig link, then choose am i bricked?.
apbthe3 said:
I suspect you are correct about the hard brick, but I would still try a jig. I had a failure flashing bootloaders once that killed my cappy, but though a stroke of fortune a jig still worked for me. You can build one for a couple of bucks of parts from Radio Shack, you've got nothing to lose. If not, it can be repaired.
Click to expand...
Click to collapse
Yes, it's still worth a try. But unfortunately it will have to wait at least till the end of the month. That's when my college break is over and I'm back to school.
mrhaley30705 said:
Before you start looking at all that, make sure you are hard bricked. Easiest way is to use Linux Mode Detector. Use the link below labeled Captivate sig link, then choose am i bricked?.
Click to expand...
Click to collapse
Sorry but I'm not installing an OS just to use a program. I do believe the phone is hard-bricked though:
1- Doesn't power up with the on/off button
2- Doesn't go into recovery mode
3- Doesn't go into download mode
4- Doesn't light up when plugged into wall charger
If that isn't hard-bricked, then I'm really scared to find out what that really is
I sent a PM and an email to Adam Outler. I hope he replies it!
Linux is easier to use than you think, and it's a really handy tool to have when working with Android phones. You can install Linux entirely to a cheap thumb drive (I have a $4 4gb thumb drive running lubuntu) and it can get you out of a lot of Android related jams. If you're not willing to go through letting Linux up and running, might not want to do too much with phones either. I don't mean to be snarky, but I started using Linux casually a couple years before I started messing with phones and Linux is much more straightforward.
Edit: and if you have a multimeter around, check the voltage of your battery. Should be 4.2v=full, 3.5v ish is dead. If you battery pull, reinsert, hold volume up and down, and then connect to your pc with Odin open (don't hit power) what does Odin show? Last, did you get this phone used? Battery may be completely worn out, which would be why it was almost full and looks hard bricked now.
Wubi installer would be a better choice. And when your finished, it uninstalls just like an app. It's kind if a semipermanent dual boot. Check it out.
sekine12 said:
Linux is easier to use than you think, and it's a really handy tool to have when working with Android phones. You can install Linux entirely to a cheap thumb drive (I have a $4 4gb thumb drive running lubuntu) and it can get you out of a lot of Android related jams. If you're not willing to go through letting Linux up and running, might not want to do too much with phones either. I don't mean to be snarky, but I started using Linux casually a couple years before I started messing with phones and Linux is much more straightforward.
Click to expand...
Click to collapse
Well, I guess I'll look into that now. I'm running windows over a MacBook (stuck with it till I get back home). Maybe some tips running linux w/ a pendrive with bootcamp?
sekine12 said:
Edit: and if you have a multimeter around, check the voltage of your battery. Should be 4.2v=full, 3.5v ish is dead. If you battery pull, reinsert, hold volume up and down, and then connect to your pc with Odin open (don't hit power) what does Odin show? Last, did you get this phone used? Battery may be completely worn out, which would be why it was almost full and looks hard bricked now.
Click to expand...
Click to collapse
I'll look into the multimeter. The phone IS used, but I'm sure the battery isn't worn out.
Hooking up the phone, pressing both volume buttons, with odin open gives me nothing. Zip. If it was the battery wouldn't the phone give some sign of life after charging it for a while? Didn't happen.
mrhaley30705 said:
Wubi installer would be a better choice. And when your finished, it uninstalls just like an app. It's kind if a semipermanent dual boot. Check it out.
Click to expand...
Click to collapse
As stated, using windows with bootcamp over a MacBook. Maybe you can help me out? Will this work?
leandroab said:
If it was the battery wouldn't the phone give some sign of life after charging it for a while? Didn't happen.
Click to expand...
Click to collapse
My understanding is that charging is controlled by firmware to protect the battery, so it won't even charge if it's bricked.
apbthe3 said:
My understanding is that charging is controlled by firmware to protect the battery, so it won't even charge if it's bricked.
Click to expand...
Click to collapse
Right, or if the battery is so dead it can't start to turn on, it won't turn on. Or, if it was soft-bricked with no images to display, it may have killed itself without a firmware to allow it to charge properly. Not very likely, but there are a couple possibilities that end with a dead battery and no way to know.
apbthe3 said:
My understanding is that charging is controlled by firmware to protect the battery, so it won't even charge if it's bricked.
Click to expand...
Click to collapse
sekine12 said:
Right, or if the battery is so dead it can't start to turn on, it won't turn on. Or, if it was soft-bricked with no images to display, it may have killed itself without a firmware to allow it to charge properly. Not very likely, but there are a couple possibilities that end with a dead battery and no way to know.
Click to expand...
Click to collapse
Right. I'll check the V of the baterry once I get my hands on a multimeter.(somebody took all of them here at the house for some reason)
The multimeter read that the battery has 3.92V, so it's not dead. So to sum it up I only have two options now:
1- Try a USB jig
2- Attempt the UnBrickable mod/send it to Adam Outler
Both of them will take time. Unfortunate for me. Good news is that WILL have it back up and running. It will just take some time
leandroab said:
The multimeter read that the battery has 3.92V, so it's not dead. So to sum it up I only have two options now:
1- Try a USB jig
2- Attempt the UnBrickable mod/send it to Adam Outler
Both of them will take time. Unfortunate for me. Good news is that WILL have it back up and running. It will just take some time
Click to expand...
Click to collapse
So nothing whatsoever shows up in ODIN when you 1- batt pull, 2- batt reinsert, 3- plug in USB while holding either volume down, or volume up + vol down (w/o turning phone on)?
I just bought the phone and using LGmobile update. It downloaded a file about 420mB and in the process update I got a message problem communicate with your phoneme. please disconnect take phone out etc.. and turn phone on and connect.
I follow the instruction but my phone won't turn on regardless to what I do.
Please help.
Sorry wrong paste..lol ..here is right info...
Check Device Manager for the current active "COM Ports"
Boot into DOWNLOAD MODE Plug the phone into the computer without the battery inserted Hold [VOL UP + POWER] Put the battery in and wait until it vibrates or for 3 seconds Check Device Manager for a NEW "COM Port...from dark lestat post in development... make sure to thank him
Then you should be able to re LG flash
Sent from my LG-P920 using xda premium
Keep having problem PC doesn't detect phone. Unplug, remove battery etc...so frustrated. Now everytime turn phone off I have to plug power cord in order for it to turn on. How do you do factory reset?
Give this thread a try ..follow exactly ....make sure battery has a charge and is not borked...these phones seem to have battery issues. If bat is good this is the info you want..seems like a lot of work but it is what worked for me. dark lestat is very knowledgable and helpful regarding these things. Hope this helps you..
Guess I should include link...lol.
http://forum.xda-developers.com/showthread.php?p=22417769
Sent from my LG-P920 using xda premium
Follow every step but got stuck when it trying to flash and stop at 20% just like when I update using LG software. Order new battery hope fixing the problem. My first LG android phone can't return bought it on craigslist
Hopefully the battery will help...good news is if you can connect and start the flash each time it is not bricked...i have not seen this problem posted before so doubt it is hardware...does adb see it...if so i would try to wipe system and data and reflash...i would also pull sim and sd card before flash to see if that helps ?
Sent from my LG-P920 using xda premium
Replace the battery with new and same problem, my phone doesn't even read my AT&T sim card.
Any button that I can do hard reset?
I had this same problem is your phone not turning on or just not downloading the update? I bricked my phone installing the update and it can be fixed but if you having problems with the connection during update you gotta keep trying it will go through. If it wont turn on at all there is a fix.
Sent from my LG-P925 using Tapatalk 2
This is the problem:
1. I bought new phone on Craigslist running 2.2 and everything working.
2. Connect to PC and set up driver, software etc.. there is an update so I did.
3. Got stuck about 17-20% and message disconnect and re-reconnect etc.. and I did.
4. Ever since I can't t urn it on unless connect to a charger.
5. I will not read SIM card and kept saying reorganized when check on setting and mobile network.
I am stuck here cause tried so many time. Also, phone turn off with full battery charge but next morning when I turn on completely drained. I think software screw up some how during the initial upgrade. Just don't know how to fix it
OK try this take your battery out and plug it into your computer and hold the volume down key until you hear or see your computer recognize it. It should beep a couple times. Be sure to leave your phone off this whole time. Open up your LG support tool. Once it says your connected open the customer support tab. Click on "Recovery Phone." Enter your phones info and click the check button. It should take you through the steps from there. I had the same problem and had also bought it from craigslist. The good news is even if this doesn't fix it, your phone is less than a year old and can be sent to LG for a fix or they'll send you a refurbished phone. They will want a reciept but if you don't have it just tell them you tossed it. Same for the box if you don't have that. They will do it just start getting angry if they give you the run around. I was freaking out just like you LOL. I couldn't find anything on the web and the LG lady was just as stumped as me... I just happened to try this before I sent it in and it worked. Let me know if you have any luck.
Sent from my LG-P925 using Tapatalk 2
As far as the update goes I eventually did get it to work. Just keep trying. I plugged it in to try again one time and it said my phone was already updated. I went and checked and sure enough it was. The visual change isn't dramatic your signal bars turn green and you get some more bloatware like a 3d game converter. The reason for this is the phone has a custom LG UI and will not adopt the gingerbread UI. Don't freak a lot of people insist its not GB but it is. There is a lot more to a OS than the user interface.
Sent from my LG-P925 using Tapatalk 2
Warranty thru LG or at&t? You mind give a little more. I didn't even know LG has a warranty in US?
Sent from my LT26i using xda premium
The warranty is through LG at&t wont do anything for you cause they will know you got it off CL. You'll need your imei and your s/n from under your battery. I wouldn't tell them you got it off CL. The only way this wont work is if the previous owner registered the phone with lg which is unlikely since they didn't even have the GB update. Call 18002430000. Again do not tell them you got it from CL. The phone is under a year old and they will do it for you. If it has to be told that it isn't yours say you had a step brother or friend give it to you. They will want a reciept but you can tell them you tossed it all and your imei Ans s/n will be enough. Also tell them it happened using their support tool. Good luck.
Sent from my LG-P925 using Tapatalk 2
PROlific666 said:
OK try this take your battery out and plug it into your computer and hold the volume down key until you hear or see your computer recognize it. It should beep a couple times. Be sure to leave your phone off this whole time. Open up your LG support tool. Once it says your connected open the customer support tab. Click on "Recovery Phone." Enter your phones info and click the check button. It should take you through the steps from there. I had the same problem and had also bought it from craigslist. The good news is even if this doesn't fix it, your phone is less than a year old and can be sent to LG for a fix or they'll send you a refurbished phone. They will want a reciept but if you don't have it just tell them you tossed it. Same for the box if you don't have that. They will do it just start getting angry if they give you the run around. I was freaking out just like you LOL. I couldn't find anything on the web and the LG lady was just as stumped as me... I just happened to try this before I sent it in and it worked. Let me know if you have any luck.
Sent from my LG-P925 using Tapatalk 2
Click to expand...
Click to collapse
I got panic and it's in local shop if they can repair it but will take it back and try. Thanks.. at least someone here tried to help me... the link flash back to stock ROM didn't work for down load so I can flash it. I even root and flash custom ROM still didn't work now I want to flash it back to stock... if you can just help me a little please
download mode: I got a little confused cause someone told me take battery out connect phone to PC and put battery back. Yours didn't mention anything about put battery back in
Yeah when I did mine it wouldn't turn on at all even when it was plugged in so I think i left my battery in and did it bc it wouldn't respond to anything. I would try to get it to recognize with the battery in but if it turns on after you do plug it in then it will need to be out. You can try to put the battery back in after the computer and the LG support tool recognizes your phone bc after it gets done it reboots. I'm not sure if the battery is needed for it to work but mine was in but you can try it multiple times with it in and out. I freaked out too I had just bought the phone off CL and plugged it in to update and it had the connection failure a couple of times and then poof nothing no vibration no boot screen nothing. The LG people tried getting me to do a hard reset and when that wouldn't work she told me I would have to send it in and that it was still under the manufacturers warranty. I was desperate to say the least so I tried all kinds of combinations. The key is to get your pc to recognize your phone while it is off. If you can do that with the battery in I would try it that way first. If you don't have the box you will need to copy down the phones info, (IMEI and S/N) which is under the battery, for the recovery phone part of the support tool. It worked for me so I hope you have some luck with it. Also I would consider waiting until the ghost call thing gets fixed before you go to gingerbread. If I had known I would have stayed with froyo until they fixed it.
Sent from my LG-P925 using Tapatalk 2
Ok I tried everything and it doesn't work. I now need to flash back to stock rOM using recovery. I need the file Thrill Stock ROM zip file and the link on forum about flash back to stock no longer working
I had the same thing happen to me. U hold down "volume down" and power button, when the phone is off and that will put it into android dfu mode. Now select factory reset and Press menu button.
Sent from my LG-P925 using xda app-developers app
Volume down for recovery and so on. Volume up for download from tool.
If your doing the recovery method that TheDarkLestat setup then your gonna need to do the software setup and drivers step by step. Assuming you have done that. Remove the battery then plug the USB in and quickly hold down the pwr, and vol UP till it vibrates then let go. Start the loader and place the battery back in while its doing its thing . Then don't touch it till its done.
Only simply way I can think of to repair a soft bricked thrill. As long as it loads to recovery or download then our phone Is fixable. You might be able to politely ask TDL to remote in and provide a fix. He was doing that for a lot of us for a while. Though if your not gonna donate for his time then don't bother lol.
Cab121 said:
Volume down for recovery and so on. Volume up for download from tool.
If your doing the recovery method that TheDarkLestat setup then your gonna need to do the software setup and drivers step by step. Assuming you have done that. Remove the battery then plug the USB in and quickly hold down the pwr, and vol UP till it vibrates then let go. Start the loader and place the battery back in while its doing its thing . Then don't touch it till its done.
Only simply way I can think of to repair a soft bricked thrill. As long as it loads to recovery or download then our phone Is fixable. You might be able to politely ask TDL to remote in and provide a fix. He was doing that for a lot of us for a while. Though if your not gonna donate for his time then don't bother lol.
Click to expand...
Click to collapse
I dont' ask for donations.
It's just courtesy.
Hi guys,
Very strange problem, just got my Nexus 4, it prompted me to update. It was plugged in, charging, I let it restart to update and it simply never came back on. It didn't do any of the Android update process (with the Android on screen), just shut off, and never woke up again.
I've tried holding down volume + power, and the only thing that happens when I do this is the LED notification light flashes red for a few seconds then turns off, then repeats 10 seconds later.
Has anyone got any ideas of what could be the problem, any troubleshooting tips? It seems to be turning on in some way but not properly in that when I plug it into my Windows machine, it starts to install drivers, but still no real sign of life.
Otherwise, looks like I'll be sending it back and waiting weeks for a replacement..
Trying pulling the battery, oh wait...
Qassim said:
Hi guys,
Very strange problem, just got my Nexus 4, it prompted me to update. It was plugged in, charging, I let it restart to update and it simply never came back on. It didn't do any of the Android update process (with the Android on screen), just shut off, and never woke up again.
I've tried holding down volume + power, and the only thing that happens when I do this is the LED notification light flashes red for a few seconds then turns off, then repeats 10 seconds later.
Has anyone got any ideas of what could be the problem, any troubleshooting tips? It seems to be turning on in some way but not properly in that when I plug it into my Windows machine, it starts to install drivers, but still no real sign of life.
Otherwise, looks like I'll be sending it back and waiting weeks for a replacement..
Click to expand...
Click to collapse
Call Google, they set up a call center for these exact types of questions.
Yep looks like I'll have to.
Just thought I would check here in case anyone knew any troubleshooting methods that might bring some life back to it.
Oh dear..
Qassim said:
Hi guys,
Very strange problem, just got my Nexus 4, it prompted me to update. It was plugged in, charging, I let it restart to update and it simply never came back on. It didn't do any of the Android update process (with the Android on screen), just shut off, and never woke up again.
I've tried holding down volume + power, and the only thing that happens when I do this is the LED notification light flashes red for a few seconds then turns off, then repeats 10 seconds later.
Has anyone got any ideas of what could be the problem, any troubleshooting tips? It seems to be turning on in some way but not properly in that when I plug it into my Windows machine, it starts to install drivers, but still no real sign of life.
Otherwise, looks like I'll be sending it back and waiting weeks for a replacement..
Click to expand...
Click to collapse
I've no intention to frighten you. Had similar problem with lg optimus one. Instead of boot, light just flashed for few times and static snow appeared on screen. Service said that it was motherboard failure.
Are you holding it wrong?
As the front and back both have glass..... are you sure its not turned face down?
Sorry I couldn't resist. Hope you get it sorted, and yeah the Google helpdesk is first place to start
Sent from my GT-I9300 using xda premium
if you have a screw driver kit, try opening the back and remove the battery, i heard the battery is removable but needs to be done with caution... again this is only if you dont want to send it back and wait for a month... just a suggestion..
pparavas said:
if you have a screw driver kit, try opening the back and remove the battery, i heard the battery is removable but needs to be done with caution... again this is only if you dont want to send it back and wait for a month... just a suggestion..
Click to expand...
Click to collapse
Would this void warranty?
Sent from my SAMSUNG-SGH-T769 using xda premium
pparavas said:
if you have a screw driver kit, try opening the back and remove the battery, i heard the battery is removable but needs to be done with caution... again this is only if you dont want to send it back and wait for a month... just a suggestion..
Click to expand...
Click to collapse
Usually every phone that have a inreplaceable battery can similete a battery pull pressing powe button and vol up + down for about 10 seconds
pparavas said:
if you have a screw driver kit, try opening the back and remove the battery, i heard the battery is removable but needs to be done with caution... again this is only if you dont want to send it back and wait for a month... just a suggestion..
Click to expand...
Click to collapse
Pretty dumb suggestion for a new device.
Can you get to a recovery menu? Download Mode? Anything?
feedtheducks said:
Would this void warranty?
Sent from my SAMSUNG-SGH-T769 using xda premium
Click to expand...
Click to collapse
No as far as i know and read everywhere.. check this link... i also saw on android central.. that you could keep holding the power button for 10 seconds for it to restart
http://www.technobloom.com/nexus-4-...eplace-xda-warns-of-potential-danger/2218834/
---------- Post added at 11:05 AM ---------- Previous post was at 11:04 AM ----------
feedtheducks said:
Would this void warranty?
Sent from my SAMSUNG-SGH-T769 using xda premium
Click to expand...
Click to collapse
bowenac said:
Pretty dumb suggestion for a new device.
Can you get to a recovery menu? Download Mode? Anything?
Click to expand...
Click to collapse
Thanks for your comments... I never mentioned that its a good suggestion, all i thought was to help a guy in need, sorry if you felt bad..
pparavas said:
if you have a screw driver kit, try opening the back and remove the battery, i heard the battery is removable but needs to be done with caution... again this is only if you dont want to send it back and wait for a month... just a suggestion..
Click to expand...
Click to collapse
No. This is a brand new device with full warranty.
Call support and see what they say.
t0ph0id said:
Trying pulling the battery, oh wait...
Click to expand...
Click to collapse
lmao :laugh:
Ok, I think I've solved it.
I did a bit of searching for similar problems on LG devices, and found a thread on Microsoft.com about an LG Optimus 7. (Do a search for 'LG optimus 7 not turning on' (top result) I can't post links yet).
Yes, a LG Windows Phone device.
I unplugged the device, held down Vol up and Vol down + Power for around 10 seconds, then plugged the device back in and it booted up. The problem is, it is doing this every time and sometimes this method takes a few tries to get it working.
Once the device boots up, it is fine, but this means I can't install the latest OTA update as when it goes to reboot to install, it just falls over, and to get it to start again you need to essentially do a hard reset.
The good news is that I can probably wait a few weeks for the stock levels to replenish before sending it back so I'm not waiting too long without it.
This happened to me at the store yesterday thankfully they were able to call another store before they opened and hold one for exchange seeing how you fixed it I'm glad I wasn't able to resurrect it right then and there
Sent from my Nexus 4 using xda app-developers app
I hope someone can help me here, I'm posting with the belief that this may be a simple enough problem (With the hope).
I tried to install a Custom Recovery on my Galaxy S using this tutorial - wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
I managed to get to step 6, and a blue bar appeared, but then i could not do step 7.
Now i cannot boot into recovery mode, nor will the phone boot past the Samsung Galaxy S logo.
I can still get into download mode, but Odin does not detect the phone.
. I have changed cable and tried different versions of Odin..
When i turn on the phone normally it shows the Samsung Galaxy S logo, blinks, and then reboots and does the same.
When i try to enter recovery, i get the same, unless i connect it to the PC. I then get an 8 pointed star, like the loading flash circle thing - the same as a flash video loading except it does not move.
I have also removed the battery and tried to enter recovery and download mode while inserting the battery.
I have removed the SIM and battery for a few minutes.
when i try to start Zadig, with the phone connected in Download mode, i get "Gadget Serial" as the device connected. I used to get "Samsung USB Composite Device"
I have tried many different things and read over the recommended threads on this forum. I think i need a bit more pointing in the right direction.
I really hope somebody can help me. I am very worried that i may have bricked it.
Thank you.
Try this:
This feature is great for people who
a) Have a bad KIES flash
b) Stuff up their phone somehow
c) Accidentally flash something dodgy via ODIN
d) Some other random occurence
To test this feature you just need to start with your phone turned off... Best way to be sure is to remove the battery.
Then
1. Put battery back in
2. Press and hold Volume Up + Home Key
3. Continue holding those buttons and then press and hold power button.
4. When you see the logo pop up release power button ONLY
5. Keep holding two buttons from step 2 until you enter recovery mode.
I hope this helps?
Also have you tried everything on this thread:
http://forum.xda-developers.com/showthread.php?t=1134975
akash6969 said:
Try this:
This feature is great for people who
a) Have a bad KIES flash
b) Stuff up their phone somehow
c) Accidentally flash something dodgy via ODIN
d) Some other random occurence
To test this feature you just need to start with your phone turned off... Best way to be sure is to remove the battery.
Then
1. Put battery back in
2. Press and hold Volume Up + Home Key
3. Continue holding those buttons and then press and hold power button.
4. When you see the logo pop up release power button ONLY
5. Keep holding two buttons from step 2 until you enter recovery mode.
I hope this helps?
Also have you tried everything on this thread:
http://forum.xda-developers.com/showthread.php?t=1134975
Click to expand...
Click to collapse
I hadn't seen that thread, but i have gone over tons of them Thanks for reply.
I eventually got Odin to detect it and I tried this - http://forum.xda-developers.com/showthread.php?t=1544487
It came up red and said failed.
I closed odin and disconnected the phone. Now i can't even turn it on.. Nothing. I am hoping the battery died, and it's a coincidence..
No response at all to any buttons... I haven't done anything else.
If i can get it to power up again, i'll try those tips.
Tomato_Jam said:
I hadn't seen that thread, but i have gone over tons of them Thanks for reply.
I eventually got Odin to detect it and I tried this - http://forum.xda-developers.com/showthread.php?t=1544487
It came up red and said failed.
I closed odin and disconnected the phone. Now i can't even turn it on.. Nothing. I am hoping the battery died, and it's a coincidence..
No response at all to any buttons... I haven't done anything else.
If i can get it to power up again, i'll try those tips.
Click to expand...
Click to collapse
Ok, Don't worry, Charge your phone battery to 100%, leave over night. ( keep charger connected to your phone overnight)
Best to have a fully charged battery in these situations!
Keep calm, and read and prepare what you want to do next.. Don't try everything in a frantic effort to get your phone started again.
I know it's difficult, but there are lots of threads on how to rectify most problems.
I wish you Good luck!!
sorry to ask some stupid question, but can u make sure what versiom ur fone is?
is it i9000?, or i9001 or i9003? or korean anycall? as far as i know, flashing i9000 ROM to i9003 will hardbrick da device.
Sent from my GT-I9000 using xda premium
akash6969 said:
Ok, Don't worry, Charge your phone battery to 100%, leave over night. ( keep charger connected to your phone overnight)
Best to have a fully charged battery in these situations!
Keep calm, and read and prepare what you want to do next.. Don't try everything in a frantic effort to get your phone started again.
I know it's difficult, but there are lots of threads on how to rectify most problems.
I wish you Good luck!!
Click to expand...
Click to collapse
Thanks.
This is a disaster. I tried to power it on to any mode there before i saw your post.
I needed to update the phone, because an app i needed for studying was only available on Android 4+.
Now no phone..
I saw a few threads, i hope after i leave it overnight i'll be able to power it.
If not, probably a JIG?
I don't fancy making one, but if i have to, i guess i'll give it a try. I don't think i could wait a week or more for a premade one to be delivered.
Anyway, for now, i'll keep my fingers crossed.
Thanks for help/tips and reply.
I'll post back tomorrow, hopefully with some better news.
Tomato_Jam said:
Thanks.
This is a disaster. I tried to power it on to any mode there before i saw your post.
I needed to update the phone, because an app i needed for studying was only available on Android 4+.
Now no phone..
I saw a few threads, i hope after i leave it overnight i'll be able to power it.
If not, probably a JIG?
I don't fancy making one, but if i have to, i guess i'll give it a try. I don't think i could wait a week or more for a premade one to be delivered.
Anyway, for now, i'll keep my fingers crossed.
Thanks for help/tips and reply.
I'll post back tomorrow, hopefully with some better news.
Click to expand...
Click to collapse
Sorry to say, most likely you will need a USB JIg to fix the problem you have. :/
If you linked the correct page when you said you tried to do this- and if I opened the correct page, that takes you to an SII section. Those are SII firmwares, not for the S.
So as compacity said, please clarify what device you have... Whether its an I9000 (galaxysmtd is for the I9000) or an I9100 (the firmware page you linked). If you do have an I9000, then your brick comes from flashing a different device's rom onto the S, which would give this error in Odin beause its incompatible.
In this case, you'd probably need a USB Jig to come out of it.
Try what the others said and hopefully you'll be at least able to enter Download mode before resorting to a jig, but considering your situation, I have to say realistically a jig is your best bet :/
Sent from my GT-P7510 using Tapatalk HD
You need a usb jig. It will get you into download mode. Now you need to flash cf root, which will come with cwm recovery. Recovery mode should work now. If you get computer!phone, then re-flash cf root. Now you should be able to flash CyanogenMod via cwm recovery. Thank if I helped!
Sent from my GT-I9000 using cm10.1
Soryuu said:
Sorry to say, most likely you will need a USB JIg to fix the problem you have. :/
If you linked the correct page when you said you tried to do this- and if I opened the correct page, that takes you to an SII section. Those are SII firmwares, not for the S.
So as compacity said, please clarify what device you have... Whether its an I9000 (galaxysmtd is for the I9000) or an I9100 (the firmware page you linked). If you do have an I9000, then your brick comes from flashing a different device's rom onto the S, which would give this error in Odin beause its incompatible.
In this case, you'd probably need a USB Jig to come out of it.
Try what the others said and hopefully you'll be at least able to enter Download mode before resorting to a jig, but considering your situation, I have to say realistically a jig is your best bet :/
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
huskyT said:
You need a usb jig. It will get you into download mode. Now you need to flash cf root, which will come with cwm recovery. Recovery mode should work now. If you get computer!phone, then re-flash cf root. Now you should be able to flash CyanogenMod via cwm recovery. Thank if I helped!
Sent from my GT-I9000 using cm10.1
Click to expand...
Click to collapse
Both helped a lot, thanks.
I had to end up bringing the phone to a repair shop
Something i am not inclined to do if i can avoid it. Especially if i caused it, i would hope i could undo it. But because i need a jig, and i wouldn't have time to get one or make one before Monday, i had to bring it to someone else.
I am buying the materials for a jig, and maybe going to buy one also, for future.
@Soryuu - Yep, i linked to the page, so i must have flashed the wrong firmware.
I'm angry with myself because i read everything else carefully. I had been reading all day. I guess i was just tired and thought I had got to the final hurdle. I was careless.
@huskyT - Thanks, will know that for future reference. I have two old Android phones somewhere. One is a Galaxy Europa, and one is an LG (not sure what model). Both are borked in some way, but i could probably use them for practice. I think the Galaxy Europa is flashed badly. Not by me. (Thankfully).
Tomato_Jam said:
Both helped a lot, thanks.
I had to end up bringing the phone to a repair shop
Something i am not inclined to do if i can avoid it. Especially if i caused it, i would hope i could undo it. But because i need a jig, and i wouldn't have time to get one or make one before Monday, i had to bring it to someone else.
I am buying the materials for a jig, and maybe going to buy one also, for future.
@Soryuu - Yep, i linked to the page, so i must have flashed the wrong firmware.
I'm angry with myself because i read everything else carefully. I had been reading all day. I guess i was just tired and thought I had got to the final hurdle. I was careless.
@huskyT - Thanks, will know that for future reference. I have two old Android phones somewhere. One is a Galaxy Europa, and one is an LG (not sure what model). Both are borked in some way, but i could probably use them for practice. I think the Galaxy Europa is flashed badly. Not by me. (Thankfully).
Click to expand...
Click to collapse
Don't stress mate, we all have bad days, we all make mistakes
Sent from my GT-P7510 using Tapatalk HD
Well....
I would have been quicker if i had ordered a jig and done it myself.. (Worth mentioning, i had told guy in phone shop what happened, and about the required "jig")
I collected my phone from the shop today, after a week, and i was told "Your phone is f*****d". To which i replied, "what? are you sure, i mean, i have only flashed it with SGS2 firmware, i'm under the impression it is very hard to break/brick, if i have a jig."
He told me, "Nope, it's beyond repair, it won't work. If you want, i can use the screen and other parts, i'll buy it off you for €40"
No thanks.
So now i am on the lookout for a premade jig. Does anybody know where i can buy one?
I meant to last week, but things happened, and without a phone i was running around a bit...
I'm going to check ebay, but if somebody could recommend somebody reliable, i'd prefer that. Thanks.
I bought it from ebay, no problem...but just saw a couple of minutes ago that also on amazon germany these jigs are offered now/in the meantime....
rodman01 said:
I bought it from ebay, no problem...but just saw a couple of minutes ago that also on amazon germany these jigs are offered now/in the meantime....
Click to expand...
Click to collapse
Thanks.
I bought a jig, and it arrived today. Have phone in charger.
Do i just plug the jig in?
Or do i also do the three button press?
The screen is completely black, and nothing appears on it.
only plug the jig in, thats all... phone will start in download mode of its own. :fingers-crossed: :fingers-crossed:
rodman01 said:
only plug the jig in, thats all... phone will start in download mode of its own. :fingers-crossed: :fingers-crossed:
Click to expand...
Click to collapse
Thanks, going to leave it charging for a little longer, and try it.
If it doesn't work, would a motherboard for the Samsung Galaxy S be easy to replace? I have found one unlocked for €25.
EDIT
Found a tear down video here - http://www.youtube.com/watch?v=vxPWsLd05F4
yes thats not so difficult...only thing a bit complicated is to open the back or middle cover...but there are a few movies on youtupe where you can see how it can be opened and dismounted....btw for the first try with the jig battery has not to be that full...only if it starts in download mode and you can flash it via odin I would recommend to charge it complete.
rodman01 said:
yes thats not so difficult...only thing a bit complicated is to open the back or middle cover...but there are a few movies on youtupe where you can see how it can be opened and dismounted....btw for the first try with the jig battery has not to be that full...only if it starts in download mode and you can flash it via odin I would recommend to charge it complete.
Click to expand...
Click to collapse
Thanks again.
I am after removing it from the charger, and inserted the jig. It's in about 30 seconds now, and nothing is happening..
that sounds not good...ususaly it takes only a few seconds or perhaps a minute till it starts to download mode....sorry for no better news....
rodman01 said:
that sounds not good...ususaly it takes only a few seconds or perhaps a minute till it starts to download mode....sorry for no better news....
Click to expand...
Click to collapse
What seems to have happened, is i tried to flash it with SGS2 rom. So is it unbrickable?
I am not sure but I think that minimum the bootloader is damaged...there is one more possibility: to repair it via jtag...but for this you have to find someone, who ones one and can repair it....some of the guys don't take much money for such a repair, but with transport costs ets...perhaps it would be cheaper and faster if you take the new mainboard you mentioned.