hello every one
i was using cici ros mookes port and it was running well
suddenly after using it for 24 hours the touch failed to work and i was unable to unloack the phone by swipe down the lock on touch screen
then i flased patched poland by smart flash tool it flashed ok but after success ful flash it shows the cwm touch which i have installed but i was unable to operate it by touch
if i tried to select the items by volume up down menu it returens to reboot the phone selections
i reboot the phone but now its boot loop after lg logo and some animation of lg logo.
i tried to recover the phone thorugh b2 c application it also successfully flashed the v20 o version but boot loop
please help me
i have searched xda and tried 3 diff patched ap cp bin files and not got success pl answer thanks to all for reading this question waiting for some reply from the xda members and cici rom author pl if he reads this .
flash again via smartflash, you've messed up with the wiping step.
maybe some wrong step in using the smartflash tool.. use the "rom copy" option, choose ap, cp, then start.. just that.. so far, that tool always unbrick my phone from any condition..
Screen may be broken
try again by smartflash but only checked rom from provider and when will be bad you have to go lg service
Thanks all iki duke supi
it was hardware fault the touch plate panel was not working got it working in 2 days from LG service center.
So the actually problem was solved
Than I again root with smart flash and when rebooted in cwm just mounted SD card copied Zeus on it and installed Zeus 5. 35 thanks all of you and Zeus creator
At present all working fine
Fast stable ok thanks again all.
Sent from my LG-P970 using XDA
Related
Hey whats up I just rooted my LG and put a custom rom on it which worked fine but i went to add a different one and it installed fine but when i reboot from cwm i just get the LG logo now and cant boot into cwm or recovery. Now I tried to smartflash but i had the wrong files so i download the right ones now and smart flash doesnt show my phone at all in the com box or driver and i cant press start.
Thanks for any help
GreenCrackKush said:
Hey whats up I just rooted my LG and put a custom rom on it which worked fine but i went to add a different one and it installed fine but when i reboot from cwm i just get the LG logo now and cant boot into cwm or recovery. Now I tried to smartflash but i had the wrong files so i download the right ones now and smart flash doesnt show my phone at all in the com box or driver and i cant press start.
Thanks for any help
Click to expand...
Click to collapse
Have you tried using the LG update tool?that should settle most of the issues...
if you have recovery, try using the Back to EXT3 which will wipe all the user data and apps....and then flash the custom ROM one more time to check
hi all, i have almost the same problem.
i used chuck norris 1.5 with etana kernel, then i flashed synobsis 1.2 and after that my phone dosent boot. so i tray to go back to an old back up, but with power and volume down i cant enter the cwm.
i put battery out, and after a long time wait (around 12 hour) i can enter the cwm, but my sd card is not shwoen. i realy dont know why this happend, cus i flash alot of roms and kernels all the time, and never happend befor, that cwm is not avavebel.
and the badest thing, wehn i come in cwm, and go out, i have to wait again around 12 hour, with battery out, til i can reenter.......
dos someone can help me? pls
Just reflash back to Froyo using nvflash and start from the beginning and up, your phone should be fine.
Skickat från min Transformer Pad TF300T via Tapatalk 2
Hey guys, i really need some help asap. I really know i will be called a noob for asking this, but i had flashed V20n into my Lg Optimus Black (P970). After i installed Zeus mod on it i got a few bugs, very rarely and some times it wouldnt start. I used to take the battery out for a few hours and everything worked perfect. The last 2 days to it refuses to open. Stays on the LG screen and the buttons flash (has reached CMR screen, i have done a format and then restarted it, and nothing works now AGAIN). I have used easy flasher, trying to install the v20s from 3 different forums but none of them helps. I would really appreciate if i could get some useful fast answers or other link refferals. I have absolutely no personal time within the day, and i will need to know fast in case i need to take it to the service center.
HeinekenAmstel said:
Hey guys, i really need some help asap. I really know i will be called a noob for asking this, but i had flashed V20n into my Lg Optimus Black (P970). After i installed Zeus mod on it i got a few bugs, very rarely and some times it wouldnt start. I used to take the battery out for a few hours and everything worked perfect. The last 2 days to it refuses to open. Stays on the LG screen and the buttons flash (has reached CMR screen, i have done a format and then restarted it, and nothing works now AGAIN). I have used easy flasher, trying to install the v20s from 3 different forums but none of them helps. I would really appreciate if i could get some useful fast answers or other link refferals. I have absolutely no personal time within the day, and i will need to know fast in case i need to take it to the service center.
Click to expand...
Click to collapse
What about smartflashtool, did you try it yet?
If not, download it (use search to find it), then go to my noob how to, download the patched v20s provided in there and then it should work fine again. Dont forget to flash the superuser.zip and do a data, cache, dalvik wipe.
N00BY0815 said:
What about smartflashtool, did you try it yet?
If not, download it (use search to find it), then go to my noob how to, download the patched v20s provided in there and then it should work fine again. Dont forget to flash the superuser.zip and do a data, cache, dalvik wipe.
Click to expand...
Click to collapse
I have tryed it 3 times but with nothing happening. I flashed the AP and the CP file through smartflash :-/ everything in the console succeeds but when it resets target and phone reboots, it wont open. It was just lying there 30 min on the lg sign and the buttons flashing
HeinekenAmstel said:
I have tryed it 3 times but with nothing happening. I flashed the AP and the CP file through smartflash :-/ everything in the console succeeds but when it resets target and phone reboots, it wont open. It was just lying there 30 min on the lg sign and the buttons flashing
Click to expand...
Click to collapse
Try to flash a v10 version. Or try b2c app and emergency recovery.
Sent from my LG-P970 using xda app-developers app
Are you using touch version of clockworkmod recovery? If yes try to use normal clockworkmod recovery. I have a case before whatever rom i flashed i always ended into bootloop because of the touch version of clockworkmod.
Mr. Dimples said:
Are you using touch version of clockworkmod recovery? If yes try to use normal clockworkmod recovery. I have a case before whatever rom i flashed i always ended into bootloop because of the touch version of clockworkmod.
Click to expand...
Click to collapse
yes, i have the touch mod. How can i switch to normal? Works by flashing?
N00BY0815 said:
Try to flash a v10 version. Or try b2c app and emergency recovery.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
is there any chance that by switching to v10 it will work? Also, will i be able to go back to v20 after that? And, i got no idea how to use a b2c app so ill look in the site. Just incase i dont find anything can u send me a link plz?
ty
N00BY0815 said:
Try to flash a v10 version. Or try b2c app and emergency recovery.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
b2c emergency recovery did nothing... :-/
Fixed
i cant install cwm with the kdz file... i tryed to reflash with smartflash and your patched rom, but stuck into bootloop. Every time i use smartflash i bootloop ... :-/ when i run the kdz file update, everything works great but i canw find a way to flash cwm on it :-/
methods tryed:
i used the method described here: http://forum.xda-developers.com/showthread.php?t=1512203 "FAILED" i have tryed all applications like R&D Test tool, BlackJack etc. But tey all fail... Only one that used to work was the smartflash one, that for some odd reason says it succeses but makes my phone bootloop :-/
Try to flash a very old one like V10A_00.kdz that you can root with GingerBreak-v1.20.apk
Hi.
I have LG p990 and it is a rooted mobile and i have tried several CM builds. i was running CM7 build from one month . Today when i tried to power off and than tried to Boot in Recovery mode it didn't booted instead it turn off just shows LG logo and even didnt go to splash screen. even if i try to boot in recovery mode it still do same i tried putting out battery but all in vein . i am very desper from it Please any solution.
cheeta123 said:
Hi.
I have LG p990 and it is a rooted mobile and i have tried several CM builds. i was running CM7 build from one month . Today when i tried to power off and than tried to Boot in Recovery mode it didn't booted instead it turn off just shows LG logo and even didnt go to splash screen. even if i try to boot in recovery mode it still do same i tried putting out battery but all in vein . i am very desper from it Please any solution.
Click to expand...
Click to collapse
Download this and use SmartFlashTool to flash this. It will unbrick your phone but beware you will lose all your data.
Code:
http://forum.xda-developers.com/showthread.php?t=1715272
kalpak2021 said:
Download this and use SmartFlashTool to flash this. It will unbrick your phone but beware you will lose all your data.
Code:
http://forum.xda-developers.com/showthread.php?t=1715272
Click to expand...
Click to collapse
I downloaded the zip and SmartFlashTool, SmartFlashTool won't detect my device . I have properly installed my Mobile driver. if my mobile does't proceed more than starting screen how it will detect my mobile
It worked at last
cheeta123 said:
I downloaded the zip and SmartFlashTool, SmartFlashTool won't detect my device . I have properly installed my Mobile driver. if my mobile does't proceed more than starting screen how it will detect my mobile
Click to expand...
Click to collapse
I found that the given steps won't work with Windows 7 but with Windows XP they worked
cheeta123 said:
Hi.
I have LG p990 and it is a rooted mobile and i have tried several CM builds. i was running CM7 build from one month . Today when i tried to power off and than tried to Boot in Recovery mode it didn't booted instead it turn off just shows LG logo and even didnt go to splash screen. even if i try to boot in recovery mode it still do same i tried putting out battery but all in vein . i am very desper from it Please any solution.
Click to expand...
Click to collapse
Download the mobile driver again, and follow the instructions correctly. Like, removing the battery, press volume down while plugging in until the s/w update screen appears, etc etc. Good luck! Hope it'll boot after the flash.
Sent from my Optimus 2X
Mark
I've a similar-ish issue. I've got CWM installed and can boot into CWM ok. My problem was that I tried to install a ROM (MIUI) and the install had no errors, but when the phone was powered on it hung at the MIUI screen.
So I reverted to a backup successfully and decided to have another go (same problem). This time, after I restore to the backup (which is installed without error by CWM) I can't can't past the initial LG screen. Seems to go into reboot loop.
Any thoughts anyone? If I can get into CWM ok and have a working restore then is there something I'm doing wrong!!
thanks,
Mark
My LG Optimus Black P970 is bricked, its stuck at LG boot logo n I have already tried the following methods to unbrick:
1.Smartflash (flashing fls & bin files- flashes successfully but still stuck at LG logo)
2.LG Update tool - Recovery mode- flashes successfully but still stuck at LG logo)
3.KDZ (fails, coz phn not booting in emergency mode)
The guy at service center said the circuit may have been damaged coz he was unable to find the COM port (but I still get a COM port automatically in Smartflash tool) for his official LG upgrade tool. Do u have any idea if its possible to unbrick this device?
I have had such bootloops earlier, but I solved it using CWM recovery when I had it installed, while I used the recovery mode of LG Update tool (B2C) when I didnt have CWM recovery installed. This time nothing's working!!!
niraj87 said:
My LG Optimus Black P970 is bricked, its stuck at LG boot logo n I have already tried the following methods to unbrick:
1.Smartflash (flashing fls & bin files- flashes successfully but still stuck at LG logo)
2.LG Update tool - Recovery mode- flashes successfully but still stuck at LG logo)
3.KDZ (fails, coz phn not booting in emergency mode)
The guy at service center said the circuit may have been damaged coz he was unable to find the COM port (but I still get a COM port automatically in Smartflash tool) for his official LG upgrade tool. Do u have any idea if its possible to unbrick this device?
I have had such bootloops earlier, but I solved it using CWM recovery when I had it installed, while I used the recovery mode of LG Update tool (B2C) when I didnt have CWM recovery installed. This time nothing's working!!!
Click to expand...
Click to collapse
No.1 POST IN THE Q&A SECTION
No.2 Could be hardbrick
Sent from my LG-P970 using Tapatalk 2
niraj87 said:
My LG Optimus Black P970 is bricked, its stuck at LG boot logo n I have already tried the following methods to unbrick:
1.Smartflash (flashing fls & bin files- flashes successfully but still stuck at LG logo)
2.LG Update tool - Recovery mode- flashes successfully but still stuck at LG logo)
3.KDZ (fails, coz phn not booting in emergency mode)
The guy at service center said the circuit may have been damaged coz he was unable to find the COM port (but I still get a COM port automatically in Smartflash tool) for his official LG upgrade tool. Do u have any idea if its possible to unbrick this device?
I have had such bootloops earlier, but I solved it using CWM recovery when I had it installed, while I used the recovery mode of LG Update tool (B2C) when I didnt have CWM recovery installed. This time nothing's working!!!
Click to expand...
Click to collapse
Did you already try to boot to recovery via adb? If not, do it abd restore a nandroid then. What ROM did you have on your phone before it bricked and why did it brick?
And please someone report this thread, so it gets moved to Q&A, I cant, because I am on the phone...
Sent from my LG-P970 using xda app-developers app
Unfortunately, adb is not recognizing the device after bricking, but LG Update tool and Smartflash both are.
I had flashed 4-5 unofficial Jellybean and ICS ROMs in a span of a week before bricking. The latest OS I had flashed was LG official Gingerbread (which is when I lost root and CWM) n everything was working great, then I again badly wanted Jellybean, so I flashed a patched 2.3 OS using ROM converter (only to bring root again, coz this time unlockroot could not root it) n since then I have flashed using all the above mentioned methods countlessly, to ultimately brick it badly.
Left battery out of phone hole night, then put it in, try to start phone.This helped me. Is good to have battery charged.
Good luck.
Sent from my LG-P970 using xda app-developers app
I m sry I didnt understand this part "Is good to have battery charged" as well as the logic behind the pulling out of battery, could u plz explain?
Hi I had the same yesterday flash v30b official and than it will be ok
Wysyłane z mojego LG-P970 za pomocą Tapatalk 2
remove battery, enter in recovery mode : vol + and plug usb , flash with SFT with a good rom
Thread moved as questions do not belong in Development however urgent you feel your question is. Please post in the correct section going forward.
Thanks
AvRS
Pirmin81 said:
Hi I had the same yesterday flash v30b official and than it will be ok
Wysyłane z mojego LG-P970 za pomocą Tapatalk 2
Click to expand...
Click to collapse
I just installed the official ICS using Smartflash like u said, but my phone could not unbrick . I guess it might me a hardware failure. Any ideas?
I have a similar question: my friend wanted me to upgrade his FroYo software to ICS on her P970, and it kept failing the upgrade and it now cannot boot, having "Software upgrade" sign on the screen all the time...
Any ideas? Thanks in advance!
To niraj87:
To have battery charged at least 90%.
Sent from my LG-P970 using xda app-developers app
Calmdown
Try another USB port and different Rom. I spend a lot of time trying unbriked phone. I 've started from v28c next 30b
Good luck
Wysyłane z mojego LG-P970 za pomocą Tapatalk 2
Maybe you already done this but did you md5 checked the files you are downloading?
You maight be trying to flash a corrupted download.
Just a thought.
Hope you can unbrick your phone.
agtpirrone said:
Maybe you already done this but did you md5 checked the files you are downloading?
You maight be trying to flash a corrupted download.
Just a thought.
Hope you can unbrick your phone.
Click to expand...
Click to collapse
I dont know how to check md5, but I'm no downloaded ROM was corrupt.
niraj87 said:
I dont know how to check md5, but I'm no downloaded ROM was corrupt.
Click to expand...
Click to collapse
Just to make sure, download md5.exe (if you are on windows) and run the command from the folder (exe and the downloader file in same folder)
md5 Name_of_downloaded_rom.zip (or anything)
You will have to have the original md5 hashes (if you download from dev host you can have it from the download page)
hello !
I'm a in trouble with my friend's Optimus 4X HD.
We tried to install CWM but i made a mistake. i instaled the apk of the recovery but since this, the phone juste dont boot up. The LG logo just blink over and over ...
We still can acces the stock recovery (tried wipes but did nothing). And we also can get acces to the download mod (strangely only withe the battery in the phone. if it is out the screen display stranges colors ... )
We tried to fix it following tutorials showing how to flash a .kdz but all the softwares shown just crash.
If you have any idea ...
Thanks a lot ! And sorry for my english :s
Flash a kdz,
You will find the tutorial HERE
All the internel memory will be erase.
isomalt said:
hello !
I'm a in trouble with my friend's Optimus 4X HD.
We tried to install CWM but i made a mistake. i instaled the apk of the recovery but since this, the phone juste dont boot up. The LG logo just blink over and over ...
We still can acces the stock recovery (tried wipes but did nothing). And we also can get acces to the download mod (strangely only withe the battery in the phone. if it is out the screen display stranges colors ... )
We tried to fix it following tutorials showing how to flash a .kdz but all the softwares shown just crash.
If you have any idea ...
Thanks a lot ! And sorry for my english :s
Click to expand...
Click to collapse
Force an update using the LGMobileSupport tool while in download mode. The option is in the upper right menu's. That should bring the device back to life.
On why you got in a boot loop: you tried to flash a custom recovery without unlocking the bootloader. Please read a little more before you try again.
Sent from my LG-P880 using xda app-developers app
hey guys, thank you for your answers
we already tried to follow the tutorial you sent sonyc2011, but i dont understant why, most of the softwares we are supposed to use just crashes.
But we found an other tutorial (type : "How to Return / Unbrick / Downgrade LG Optimus 4X HD" to find it) that worked perfectly !
So we installed the old ICS rom, we updated it to 4.1.2, then rooted it. now we are working on unlocking the bootloader. And we will THEN install the recovery .
Thank you again for your help and sorry again for my bad english !