My LG Optimus Black P970 is bricked, its stuck at LG boot logo n I have already tried the following methods to unbrick:
1.Smartflash (flashing fls & bin files- flashes successfully but still stuck at LG logo)
2.LG Update tool - Recovery mode- flashes successfully but still stuck at LG logo)
3.KDZ (fails, coz phn not booting in emergency mode)
The guy at service center said the circuit may have been damaged coz he was unable to find the COM port (but I still get a COM port automatically in Smartflash tool) for his official LG upgrade tool. Do u have any idea if its possible to unbrick this device?
I have had such bootloops earlier, but I solved it using CWM recovery when I had it installed, while I used the recovery mode of LG Update tool (B2C) when I didnt have CWM recovery installed. This time nothing's working!!!
niraj87 said:
My LG Optimus Black P970 is bricked, its stuck at LG boot logo n I have already tried the following methods to unbrick:
1.Smartflash (flashing fls & bin files- flashes successfully but still stuck at LG logo)
2.LG Update tool - Recovery mode- flashes successfully but still stuck at LG logo)
3.KDZ (fails, coz phn not booting in emergency mode)
The guy at service center said the circuit may have been damaged coz he was unable to find the COM port (but I still get a COM port automatically in Smartflash tool) for his official LG upgrade tool. Do u have any idea if its possible to unbrick this device?
I have had such bootloops earlier, but I solved it using CWM recovery when I had it installed, while I used the recovery mode of LG Update tool (B2C) when I didnt have CWM recovery installed. This time nothing's working!!!
Click to expand...
Click to collapse
No.1 POST IN THE Q&A SECTION
No.2 Could be hardbrick
Sent from my LG-P970 using Tapatalk 2
niraj87 said:
My LG Optimus Black P970 is bricked, its stuck at LG boot logo n I have already tried the following methods to unbrick:
1.Smartflash (flashing fls & bin files- flashes successfully but still stuck at LG logo)
2.LG Update tool - Recovery mode- flashes successfully but still stuck at LG logo)
3.KDZ (fails, coz phn not booting in emergency mode)
The guy at service center said the circuit may have been damaged coz he was unable to find the COM port (but I still get a COM port automatically in Smartflash tool) for his official LG upgrade tool. Do u have any idea if its possible to unbrick this device?
I have had such bootloops earlier, but I solved it using CWM recovery when I had it installed, while I used the recovery mode of LG Update tool (B2C) when I didnt have CWM recovery installed. This time nothing's working!!!
Click to expand...
Click to collapse
Did you already try to boot to recovery via adb? If not, do it abd restore a nandroid then. What ROM did you have on your phone before it bricked and why did it brick?
And please someone report this thread, so it gets moved to Q&A, I cant, because I am on the phone...
Sent from my LG-P970 using xda app-developers app
Unfortunately, adb is not recognizing the device after bricking, but LG Update tool and Smartflash both are.
I had flashed 4-5 unofficial Jellybean and ICS ROMs in a span of a week before bricking. The latest OS I had flashed was LG official Gingerbread (which is when I lost root and CWM) n everything was working great, then I again badly wanted Jellybean, so I flashed a patched 2.3 OS using ROM converter (only to bring root again, coz this time unlockroot could not root it) n since then I have flashed using all the above mentioned methods countlessly, to ultimately brick it badly.
Left battery out of phone hole night, then put it in, try to start phone.This helped me. Is good to have battery charged.
Good luck.
Sent from my LG-P970 using xda app-developers app
I m sry I didnt understand this part "Is good to have battery charged" as well as the logic behind the pulling out of battery, could u plz explain?
Hi I had the same yesterday flash v30b official and than it will be ok
Wysyłane z mojego LG-P970 za pomocą Tapatalk 2
remove battery, enter in recovery mode : vol + and plug usb , flash with SFT with a good rom
Thread moved as questions do not belong in Development however urgent you feel your question is. Please post in the correct section going forward.
Thanks
AvRS
Pirmin81 said:
Hi I had the same yesterday flash v30b official and than it will be ok
Wysyłane z mojego LG-P970 za pomocą Tapatalk 2
Click to expand...
Click to collapse
I just installed the official ICS using Smartflash like u said, but my phone could not unbrick . I guess it might me a hardware failure. Any ideas?
I have a similar question: my friend wanted me to upgrade his FroYo software to ICS on her P970, and it kept failing the upgrade and it now cannot boot, having "Software upgrade" sign on the screen all the time...
Any ideas? Thanks in advance!
To niraj87:
To have battery charged at least 90%.
Sent from my LG-P970 using xda app-developers app
Calmdown
Try another USB port and different Rom. I spend a lot of time trying unbriked phone. I 've started from v28c next 30b
Good luck
Wysyłane z mojego LG-P970 za pomocą Tapatalk 2
Maybe you already done this but did you md5 checked the files you are downloading?
You maight be trying to flash a corrupted download.
Just a thought.
Hope you can unbrick your phone.
agtpirrone said:
Maybe you already done this but did you md5 checked the files you are downloading?
You maight be trying to flash a corrupted download.
Just a thought.
Hope you can unbrick your phone.
Click to expand...
Click to collapse
I dont know how to check md5, but I'm no downloaded ROM was corrupt.
niraj87 said:
I dont know how to check md5, but I'm no downloaded ROM was corrupt.
Click to expand...
Click to collapse
Just to make sure, download md5.exe (if you are on windows) and run the command from the folder (exe and the downloader file in same folder)
md5 Name_of_downloaded_rom.zip (or anything)
You will have to have the original md5 hashes (if you download from dev host you can have it from the download page)
Related
please help me i have flashed using convert kdz and flashed by SFT.. my phone now not working.. no power any thing... what i do now ???:crying:
remove the battery, enter in s/w update mode and reflash whith SFT but with a good rom.
=> http://forum.xda-developers.com/showthread.php?t=1448803
rom V20O => http://forum.xda-developers.com/showpost.php?p=23788913&postcount=170
But it's not connecting to s/w update mode. No power any more... Pc not detect my phone...
I tried everything.. removed battery and connect phone but nothing happend, just like dead phone.
Sent from my LT18i using Tapatalk 2
jimmysmart83 said:
But it's not connecting to s/w update mode. No power any more... Pc not detect my phone...
I tried everything.. removed battery and connect phone but nothing happend, just like dead phone.
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
If you really did everything and in a right way, you can start to build a new house because you have the first brick already.But...it's not so easy to brick a phone with SFT.If you really followed the rules for Smart Flash Tool it's practically impossible.I know that people tend to panic in such situations and do something wrong in a rush.Well, take the battery, sim card and memory card out of the phone; hold the volume up button and then plug your usb cable( sure that cable and contacts are okay ), which is pluged in your computer with SFT opened; sometimes the phone enters in s/w mode in a second but sometimes needs five.Then flash a GB rom or anything you want.If nothing will happen is very much possible that you have a hardware problem( something similar happened to me when my motherboard was fu.ked and this is quite common with P970 ).Good luck.:fingers-crossed:
P.S. Are you talking about SE arc or LGE P970?
jimmysmart83 said:
But it's not connecting to s/w update mode. No power any more... Pc not detect my phone...
I tried everything.. removed battery and connect phone but nothing happend, just like dead phone.
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
Did you maybe flash a wrong ROM? Double check please. Whats the name of your kdz file? Where did you get it from? Did you interupt the update procedure? Or did it get interrupted?
Sent from my LG-P970 using xda app-developers app
Edvin73 said:
If you really did everything and in a right way, you can start to build a new house because you have the first brick already.But...it's not so easy to brick a phone with SFT.If you really followed the rules for Smart Flash Tool it's practically impossible.I know that people tend to panic in such situations and do something wrong in a rush.Well, take the battery, sim card and memory card out of the phone; hold the volume up button and then plug your usb cable( sure that cable and contacts are okay ), which is pluged in your computer with SFT opened; sometimes the phone enters in s/w mode in a second but sometimes needs five.Then flash a GB rom or anything you want.If nothing will happen is very much possible that you have a hardware problem( something similar happened to me when my motherboard was fu.ked and this is quite common with P970 ).Good luck.:fingers-crossed:
P.S. Are you talking about SE arc or LGE P970?
Click to expand...
Click to collapse
maybe something wrong i did but sft tool completed flash my phone i think my kdz file was wrong maybe... i give it to mobile repair center today and he also said that phone is totally dead not detecting to pc, now he will check motherboard... tomorrow i will know...
i am talking about LG P970
anyway i have SE Arc S also.
N00BY0815 said:
Did you maybe flash a wrong ROM? Double check please. Whats the name of your kdz file? Where did you get it from? Did you interupt the update procedure? Or did it get interrupted?
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
first time i was flashed stock ROM V10A which downloaded from here But my phone bootloop its only showing LG logo and touch buttons flashing only, so i searched in xda to try another method and i got V10G_00.kdz file from india region and got [TOOL] LGExtract 0.2.1 do it all process i think i lost my recovery or maybe motherboard problem....
anyway if any suggestions please reply...
jimmysmart83 said:
first time i was flashed stock ROM V10A which downloaded from here But my phone bootloop its only showing LG logo and touch buttons flashing only, so i searched in xda to try another method and i got V10G_00.kdz file from india region and got [TOOL] LGExtract 0.2.1 do it all process i think i lost my recovery or maybe motherboard problem....
anyway if any suggestions please reply...
Click to expand...
Click to collapse
Are you sure you used the v10G for P970? Cause otherwise only and interruption could cause such a hard failure...
N00BY0815 said:
Are you sure you used the v10G for P970? Cause otherwise only and interruption could cause such a hard failure...
Click to expand...
Click to collapse
yes m sure.
jimmysmart83 said:
first time i was flashed stock ROM V10A which downloaded from here But my phone bootloop its only showing LG logo and touch buttons flashing only, so i searched in xda to try another method and i got V10G_00.kdz file from india region and got [TOOL] LGExtract 0.2.1 do it all process i think i lost my recovery or maybe motherboard problem....
anyway if any suggestions please reply...
Click to expand...
Click to collapse
Well, the phone goes in bootloop when you flash patched files with recovery and then forget to flash Superuser.You must not boot your phone when it enters in recovery after flashing with SFT but flash Superuser from your SD card first.I think that this maybe was your first problem.But LG logo and flashing leds are also a very possible sign for a faulty motherboard.The same happened to me with one week old P970 with official firmware and not rooted, when I tried just to reboot the thing.And if your phone died after this, you can be 99.9% sure that you have a fu.ked motherboard.
Is it possible to make a downgrade to my rom só i can restart to use new cm nightlies
Greetings
Sent from my LG-P990 using Tapatalk 2
I Think i found the awnser, i Will use smartflash (mainly this was my doubt. I didn't Know if This would damage the Phone)
Sent from my LG-P990 using Tapatalk 2
rolling_stone said:
I Think i found the awnser, i Will use smartflash (mainly this was my doubt. I didn't Know if This would damage the Phone)
Sent from my LG-P990 using Tapatalk 2
Click to expand...
Click to collapse
I dont think you can just downgrade with smartflash tools. V30 has a locked ICS bootloader if im correct and apparently my O2X bootlooped when i did that. Now i stuck and even NVFLASH fails
i downgraded my v28g to v20s with smartflash
Thats the answer....
Use Nvflash i downgraded many times from v28a,g,v30a down to v20 or cyanogen mod Its the savest way.
Im form germany... only found the german forum but the zips of nvflash work very well use it:
http://www.handy-faq.de/forum/lg_op...timus_speed_p990_original_rom_2x_flashen.html
DarkFantasy6 said:
Thats the answer....
Use Nvflash i downgraded many times from v28a,g,v30a down to v20 or cyanogen mod Its the savest way.
Im form germany... only found the german forum but the zips of nvflash work very well use it:
http://www.handy-faq.de/forum/lg_op...timus_speed_p990_original_rom_2x_flashen.html
Click to expand...
Click to collapse
I think it might be time for me to throw away my P990 because im not sure if the VOL UP button actually works or is it the PC problem.
---------- Post added at 07:24 PM ---------- Previous post was at 07:05 PM ----------
max21ns said:
i downgraded my v28g to v20s with smartflash
Click to expand...
Click to collapse
Anyway although I doubt smartflash could work for my case, I decided to give it try and flash V20B rom (starhub) via the .fls and .bin files method. It gave me an error when it was about to partition the "7 partitions". So i exited and unplug my phone as the SW upgrade screen on my phone turned to a blank screen. I wanted to try again and plug back holding the VOL DOWN button to enter SW mode. I heard the Windows sound notification (when a device is plugged or unplugged) as i do so but the screen was still blank. So i checked the device manager screen and saw that i entered the NVFLASH recovery mode.
Im confused as to how it would work now but anyway i was grateful to your post and that made me give smartflash a try still. :laugh::good:
the easiest way in your situation is using this [TOOL] Full Brick Repair (Clean & Easy)
It's nvflashable and already includes a CM10 nightly. Boot it up and upgrade CM10 with the built in upgrader. That's what I did yesterday. Then boot into recovery and flash gapps.
agent6 said:
Anyway although I doubt smartflash could work for my case, I decided to give it try and flash V20B rom (starhub) via the .fls and .bin files method. It gave me an error when it was about to partition the "7 partitions". So i exited and unplug my phone as the SW upgrade screen on my phone turned to a blank screen. I wanted to try again and plug back holding the VOL DOWN button to enter SW mode. I heard the Windows sound notification (when a device is plugged or unplugged) as i do so but the screen was still blank. So i checked the device manager screen and saw that i entered the NVFLASH recovery mode.
Im confused as to how it would work now but anyway i was grateful to your post and that made me give smartflash a try still. :laugh::good:
Click to expand...
Click to collapse
I had the same problem, and I leave the battery in the phone and it worked, try it
well
after reading some information, i solved my question using this thread
http://forum.xda-developers.com/showthread.php?t=1715272
thank you all guys that tried to help me.
I have been using zeus v7.6 perfectly untill today. While i was texting someone the screen started wobbling arround. (behaving a bit like the windows xp error message when you move it arround and it leaves a trail behind it). i tried restarting in recovery mode but freezed on the lg logo, having a small faint wite line at the bottom of the screen. I have tried smartflash tool with no succes, and i have also tried the script from the cotkey, but it gets stuck at the first step. Also, i cannot interact with the KDZ updater ... I could really use some help, as i cannot afford a new phone :-/
HeinekenAmstel said:
I have been using zeus v7.6 perfectly untill today. While i was texting someone the screen started wobbling arround. (behaving a bit like the windows xp error message when you move it arround and it leaves a trail behind it). i tried restarting in recovery mode but freezed on the lg logo, having a small faint wite line at the bottom of the screen. I have tried smartflash tool with no succes, and i have also tried the script from the cotkey, but it gets stuck at the first step. Also, i cannot interact with the KDZ updater ... I could really use some help, as i cannot afford a new phone :-/
Click to expand...
Click to collapse
Have you tried to remove battery and connect the phone by usb to pc, pressing vol + button?
danielr18 said:
Have you tried to remove battery and connect the phone by usb to pc, pressing vol + button?
Click to expand...
Click to collapse
Yes, i have entered S/W mode. Smartflash tool finds my phone, i set the CP and AP bin, it tells me it finished with the ""TADA"" noise and my phone restarts... well, it doesnt start, it just stays on the lg logo with the lights flashing :-/. I have tried many different versions but none starts :-/ Thank you for replying btw
AW: [Q] Bootlooping on LG optimus Black
HeinekenAmstel said:
Yes, i have entered S/W mode. Smartflash tool finds my phone, i set the CP and AP bin, it tells me it finished with the ""TADA"" noise and my phone restarts... well, it doesnt start, it just stays on the lg logo with the lights flashing :-/. I have tried many different versions but none starts :-/ Thank you for replying btw
Click to expand...
Click to collapse
B2C app and emergency recovery? The lg update tool...
Sent from my LG-P970 using xda app-developers app
N00BY0815 said:
B2C app and emergency recovery? The lg update tool...
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
I have tried it allready in the past with no succes :-/ idk why, but last time i managed to unbrick it it had quite a bit of luck involved... my basic problem is that im from a laptop and its in greek. theres something wrong with the language and i can only see symbols ... ill try again in the evening and ill let you know
Ran the KDZ updater but phone stiil stays on the lg logo...
Still unsuccessfull... Here is the log file:
AW: [Q] Bootlooping on LG optimus Black
HeinekenAmstel said:
Still unsuccessfull... Here is the log file:
Click to expand...
Click to collapse
Looks strange... do you also have a log of sft? And do you run those programs as admin? You re on XP right? Did you already disable your antivirus? Try another usb port/pc? Are you sure yourr files are good? Maybe dl the v20s from my noob how to and compare md5 sums afterwards.
Sent from my LG-P970 using xda app-developers app
no, i have not tried disabling antivirus and i am using windows 7. i will disable antivirus now and send you the SfT Log
Smart Flash Log
Here is the Smart Flash log
AW: [Q] Bootlooping on LG optimus Black
HeinekenAmstel said:
no, i have not tried disabling antivirus and i am using windows 7. i will disable antivirus now and send you the SfT Log
Click to expand...
Click to collapse
Did you run sft as admin? And follow the readme? You have to disable something in the device manager.
Sent from my LG-P970 using xda app-developers app
great, lg emergency recovery tool tells me this model is not supported for upgrading =.=
Similar problem, I was on Huexs´s 6.4, was rooted, recovery was working, then I flashed v30d by tantrums, was using it without problems, then some problems with sd card, from that point I am not able to run recovery, so I tried to flash patched v20 with Smartflash, but when it goes to rebooting, it always stay in bootloop. Only way for me is flash v30b, then root it with Unlockroot, but thats all, I can normaly use phone rooted, but I am not able to push to phone recovery image, so I can not flash any zip file ( like new kernels. etc.).
Managed to flash V30b
i managd to flash the v30b by the kdz updater but... Everything was working normally. I shut off the phone so i can go to sleep and i put it to charge. the picture i got is the lg logo with a white faint line down the bottom of the screen again. I unplug the charger and remove the battery. The next morning it worked perfectly again for aprox. 9 hours, that i was at school. Then i try texting my gf and the pictures below show what happened... WTH? Any help would be deeply appreciated :-/
OMG are you getting the same problem as redy ? O.O That crazy screen looks like his. :/
Sent from my LG-P970 using Tapatalk 2
what prob has redy got?
I got some news about this prob. When it starts, if i lock the device am continue after a while it works ok again for a bit
Sent from my half working LG-P970 using xda app-developers app
@robusto try flashing v30B. then root your OB and flash TWRP recovery. You can do it like this:
1. Install goomanager
2. Open goomanager and provide root permision
3. Hit menu and choose 'Install OpenRecovery'.
Now you have TWRP Recovery and you should be able to flash any .zip file.
It worked for me.
(or you can get twrp recovery just by pushing the twrp recovery image file using terminal emulator).
Good luck!
(sorry for my bad english x_x).
Sent from my LG-P970 using xda premium
AW: [Q] Bootlooping on LG optimus Black
GPaul said:
@robusto try flashing v30B. then root your OB and flash TWRP recovery. You can do it like this:
1. Install goomanager
2. Open goomanager and provide root permision
3. Hit menu and choose 'Install OpenRecovery'.
Now you have TWRP Recovery and you should be able to flash any .zip file.
It worked for me.
(or you can get twrp recovery just by pushing the twrp recovery image file using terminal emulator).
Good luck!
(sorry for my bad english x_x).
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
I am quite sure this wont work... security error...
Sent from my LG-P970 using xda app-developers app
any idea on how can i restore my imei from the S/W upgrade screen?
the lg united tool reads wrong imei and does not even start upgrading.
I am now on stock V30B Europe, rooted by unlockroot, uninstalled garbage and apps, whitch I dont need, using Holo launcher and LMT and am satisfied, bechmark with antutu 3100. Only I am not able change kernel, what could be phone speed up, but nevermid. I can live with it. Only can be good to convert some kernel.zip to same file, whitch can be flashed with kdz flasher or smartflashtool. Anyway thanks for ideas.
---------- Post added at 06:07 PM ---------- Previous post was at 05:53 PM ----------
HeinekenAmstel, try to left out of phone the battery for one day, then try to flash kdz v30b for your country from here http://lg-phone-firmware.com/index.php?id_mod=1, but connect phone to PC without battery in. And may be is good to do it on PC with WIN XP. For me this is working better then on PC with WIN7. Good luck.
Hello. I tried to flash original firmware from cyanogenmod 10.2. I use this toturial: http://forum.xda-developers.com/showthread.php?t=2069723
Phone was bootloop. Now i canť power my LG... screen remains black, no signs on as if it was not battery. I apologize for the mistakes I´am czech (13)
Please help me..
SXP88 said:
Hello. I tried to flash original firmware from cyanogenmod 10.2. I use this toturial: http://forum.xda-developers.com/showthread.php?t=2069723
Phone was bootloop. Now i canť power my LG... screen remains black, no signs on as if it was not battery. I apologize for the mistakes I´am czech (13)
Please help me..
Click to expand...
Click to collapse
Did you unlock your bootloader? If not you can probably use your 4X as a brick.
And the tutorial you followed is not for a custom rom (zip files, flash through cwm) but for stock LG ROM (kdz files).
EDIT: Or did you try to go back to stock?
If so, you should try to connect in S/W Mode and manually flash a kdz. Search for it.
Sent from my LG-P880
Omario-242 said:
Did you unlock your bootloader? If not you can probably use your 4X as a brick.
And the tutorial you followed is not for a custom rom (zip files, flash through cwm) but for stock LG ROM (kdz files).
EDIT: Or did you try to go back to stock?
If so, you should try to connect in S/W Mode and manually flash a kdz. Search for it.
Sent from my LG-P880
Click to expand...
Click to collapse
Yes i´m have got unlock BL.
From this toturial i flash original rom V10H. The phone was bootloop, after a week of lying flat on the table, it was completely dead .. nothing can or s / w upgrade, I do not
SXP88 said:
Yes i´m have got unlock BL.
From this toturial i flash original rom V10H. The phone was bootloop, after a week of lying flat on the table, it was completely dead .. nothing can or s / w upgrade, I do not
Click to expand...
Click to collapse
I assume it's a driver problem. Try to reinstall all drivers on your PC and try again.
Sent from my LG-P880
Omario-242 said:
I assume it's a driver problem. Try to reinstall all drivers on your PC and try again.
Sent from my LG-P880
Click to expand...
Click to collapse
as when the phone is not connected to a PC or charging. One user on the Czech forum say it is about NAND memory corruptions> Service
I am a newbie here at XDA.
Here's the story. I have an SU660 O2x phone that is stuck on the LG Logo. Before that happened, I was running on Froyo and everything works well. When my brother updated my ROM to CM9, the phone lost all its audio capabilities on the speaker and headset jack. Music, notifications, ringtones all gone. Even making calls is a no go. I couldn't hear the person on the other side of the line.
So I decided to flash back to stock ICS. I have tried to use the LG Mobile Updater tool. That finishes the firmware upgrade but everytime the phone tries to boot, it gets stuck on the LG logo. I have tried to access the recovery mode but all I get is the android logo with a spinning hyperbola on its tummy, afterwards it goes back to the LG logo screen and remains there. I don't get any options like wiping data or cache or anything.
But the funny thing is, even if it was stuck on the LG logo, my PC detects it and I can use ADB commands. But same problem. I try "adb reboot recovery", goes to the LG logo. "adb reboot download" does the same thing. I can't even do the adb shell command that wipes the device. It gives me "permission denied"
I am at a loss....I don't know how to bring this phone back to its working state. Am I lacking something? Do I need to go back to Froyo or GB to get this to work? I cannot find working links to download all the stock ROMS.
Please help. This is the only phone I have... :crying:
Thanks
Download AIO Search the forum for stock v30A rom for smartflash or get normal kdz v30a extract it via aio there is such and option an flash it with smartflash it should work ) (but search for su660 i dont know that files will work from normal o2x
Wysyłane z mojego Optimus 2X za pomocą Tapatalk 2
Flashed successfully with smartflash but.....
Wooby said:
Download AIO Search the forum for stock v30A rom for smartflash or get normal kdz v30a extract it via aio there is such and option an flash it with smartflash it should work ) (but search for su660 i dont know that files will work from normal o2x
Wysyłane z mojego Optimus 2X za pomocą Tapatalk 2
Click to expand...
Click to collapse
I have found the stock 2.3.4 ROM on a vietnamese site. It flashed successfully with smartflash. Now the problem is...
1st - Phone booted to the 1st LG Logo
2nd - Phone booted to the second LG logo (with progress bar)
3rd - Phone showed boot animation. (but is stuck on the boot animation for like 7 minutes.)
Phone now is stuck on the boot animation with an android logo moving saying LG OPTIMUS 2X.
Have I done something wrong?
EDIT: Tried to flash stock ICS rom using th AIO Toolkit.. Same thing. Stuck on LG logo. What's wrong with my phone?
Hmm try to repartition your phone to oldbootloader and flash temasek cm7 maybe this will work
Wysyłane z mojego Optimus 2X za pomocą Tapatalk 2
only Showing Lg logo