Hey peeps iv got a big problem it happened yesterday with my Galaxy note GTn7000. I was on stock ICS LPT and was flashing new kernels through CWM when suddenly my phone just kept freezing on the Samsung screen when I start it up and it has been happening since yesterday. I think it was the speedmod ICS kernel that I flashed that made this happen. I flashed Abys kernel through odin and could get in to CWM. I did factory reset/wipe cache/dalvik/cache and then flashed checkrom which was on my SD card. Installation was fine but then it got stuck on the Galaxy note startup screen. I was searching for answers on the XDA forums and someone suggested that you flash a stock full wipe GB rom. So I tried to flash LC1 open Europe rom and was waiting for an hour the the rom to flash through ODIN which had only a bit left on the bar to flash and it didn’t flash it just froze. I tried 3 times and the same thing happened . I have used the USB jig to erase previous downloads and reset binary count. I flashed ICS LPT rom through odin and it flashed normally but when it starts up it gets stuck on the Samsung screen. Any suggestions? I can get into download mode and CWM so it means Im in a softbrick. Do you think I should download an ICS rom and put it on to my SD card and then try flashing it ? Help would be appreciated thanks.
Here is the video of what happens. Basically i have waited for 4 hours yesterday and it just stays on the samsung screen
Hey, Id recommend you flashing back to GB via ODIN before we continue.
ICS still has a few bugs and that could interfere with getting you back up and running.
Hey thanks i will download a new GB stock rom, i cant post the video link because im a new member dang...
azzledazzle said:
Hey, Id recommend you flashing back to GB via ODIN before we continue.
ICS still has a few bugs and that could interfere with getting you back up and running.
Click to expand...
Click to collapse
Flashed N7000XXLQ2_N7000XXLPT_N7000CPWLP4_HOME.tar GB rom, it restarted and still the same. Freezes on the Galaxy note startup screen
1st can i ask how are u flashing roms?
2nd i assume u are able to go into recovery?
steps to install customs roms
1-go recovery
2-flash abyss4.2
3-go advance -> reboot recovery
4-wipe cache n dalivk
5-flash custom roms
6-reboot
did u do this?
Thai Damen said:
1st can i ask how are u flashing roms?
2nd i assume u are able to go into recovery?
steps to install customs roms
1-go recovery
2-flash abyss4.2
3-go advance -> reboot recovery
4-wipe cache n dalivk
5-flash custom roms
6-reboot
did u do this?
Click to expand...
Click to collapse
Im flashing through ODIN. I did the abys kernel flash before and installed a custom rom but it still kept freezing. Now i am downloading the XLA3 GB rom and hope to flash it through ODIN
CODE_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5
EFS_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5
KERNEL_N7000XXLA3_CL880036_REV02_eng_mid_noship.tar.md5
Q1_20110914_16GB.pit
UMS_N7000XXLA3_CL880036_REV02_user_low_ship_16GB.tar.md5
MODEM_N7000XXLA3_REV_05_CL1095424.tar.md5
GT-N7000-MULTI-CSC-OXALA3.tar.md5
im gonna flash the XLA3 GB rom through ODIN. I dont know where all these files go in ODIN. Anyone ?...
IsmailZU said:
CODE_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5
EFS_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5
KERNEL_N7000XXLA3_CL880036_REV02_eng_mid_noship.tar.md5
Q1_20110914_16GB.pit
UMS_N7000XXLA3_CL880036_REV02_user_low_ship_16GB.tar.md5
MODEM_N7000XXLA3_REV_05_CL1095424.tar.md5
GT-N7000-MULTI-CSC-OXALA3.tar.md5
im gonna flash the XLA3 GB rom through ODIN. I dont know where all these files go in ODIN. Anyone ?...
Click to expand...
Click to collapse
So you've extracted the original tar file, you don't need to, just point the original tar file to the pda section of pc odin, it will sort out each partition for you.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
So you've extracted the original tar file, you don't need to, just point the original tar file to the pda section of pc odin, it will sort out each partition for you.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
its an .rar file. How do i change it into a tar file ?
Is it a rar. Or a zip? If it's a rar, re download from here http://forum.xda-developers.com/showthread.php?t=1424997 then extract one level with 7zip to get the tar file.
Sent from my GT-N7000 using xda premium
was in similar situation . flashed with ICS stock ROM after entering in to download mode as described here http://forum.xda-developers.com/showthread.php?t=1424997 using odin on laptop method. thanks
Related
My Galaxy Ace is stuck in a reboot loop after trying to flash 2.3.6 onto it, when it had 2.3.5 on it previously.
I've used ODIN and no matter what firmware I try to flash onto it, it just goes into a reboot loop.
Any idea how to fix it?
Did you try to do a wipe?
vkanamekuran said:
Did you try to do a wipe?
Click to expand...
Click to collapse
A wipe worked! Thanks!
how to do a wipe please tell
mor1228 said:
how to do a wipe please tell
Click to expand...
Click to collapse
press down home button and then power on phone ...--> you will enter into recovery mode .
select wipe with help of volume keys and there you go out of bootloop
My Galaxy Ace is also in some sorta reboot loop.
Everything was working fine with it (phone is rooted and CWM installed) until I did a phone reset because I was giving the phone to my gf. After doing this the phone reboots, the blue samsung logo plays (without sound) and then repeats ad-infinitum. I can get into recovery mode and download mode ok and I've tried wipe and even restored a CWM backup (it says it was successful) but the phone just keeps rebooting. I can see the phone in odin but I've never tried to flash anything onto it and quite frankly I'm unsure whether it would just make things worse (if it needs to go back to Samsung for repair). Any help would be appreciated...
If you have cwm ..why dont you download some custom rom like cm7and flash it ..that would bring your phone back to life ...then you can downgrade to stock rom if you want ...and btw in cwm try cache partition , clear data /factory reset and clear dalvik cache ..see if it boots after you do this ..
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
when i always flash by odin or by cwm i always do wipe , wipe cache and wipe dalvik, this helps me everytime
I managed to flash a firmware from samfirmware and it fixed the reboot.
Now my issue is when I connect to Kies, it says there's an updated firmware for the phone but it fails every attempt to install it. I went back to samfirmware and found this firmware: S5830ZSKPD ## but when I download and extract it there's only 1 x MD5 file and 1 x DLL file?! The other firmware had the 4 or 5 files needed to include in Odin... any ideas guys?
I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
rogers4759 said:
I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Click to expand...
Click to collapse
Yep, that's exactly what it was, thanks again.
Unfortunately with this firmware, Kies doesn't recognise it and provides no info.
I flashed back to the older firmware... I'll just have to keep experimenting I guess.
for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.
dianpadi said:
for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.
Click to expand...
Click to collapse
Well I could flash it with Odin if I had the firmware but I don't.
It appears it's not available on SamFirmware.com
Do you know where I can download the following firmware?
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
Thanks
Lol I cant understand those firmwares ..can you tell me which version of android you want like 2.3.4/2.3.5/2.3.6 ...then ill be able to help you wanr
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
Thanks anyway but I managed to find the firmware online and flashed it using Odin.
Now Kies says I'm using the latest which is a good start : )
Now I just need to find a way to root my SGS2 GT-I9100T
U can try a custom ROM from the Developer's forums here.
I also once stucked in the Reboot Loop..............
But then I installed a custom or if you want features from a official Rom, you can install Stock Based custom ROm from the Developer forums of Galaxy Ace. Really good Rom have been made by the developers
In the chance that someone else is looking for this latest OEM firmware update:
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
It can be downloaded from: http://translate.googleusercontent....flgljh&usg=ALkJrhiMpHV83dugh4RGwhKpyjIrYIgn2Q
It is in "one part file" format and can be flashed using Odin.
whatever may be the problem ......just rem to keep a backup of ur previously used rom and just flash it with cwm...
Progress?
Sent from my GT-S5830 using xda premium
Read all the previous no way out loop boot
Hi every body
i have installed cwm, custum firmware, every thing goes ok
tryed to use simlock remover, no message, turned off the Galaxy Ace but after rebooting, a continuous loop boot, no acces to recovery, flashing on wath ever firmware version with odin success but on rebooting the loop is back, help please.
PS : while flasing with odin : "big partition size!!"
I want to revert back to Stock GB from CM9. .Can i flash with mobile Odin??
flashing with Pc odin gives yellow triangle. .I dont want to that
It is not flashing with Odin that gives the red triangle. It is rooting your phone that does it. I used Odin to get rid of the red triangle (though the phone obviously still retains it's custom binary count)
I just downloaded the following ROM and flashed it with ODIN -
N7000XXLC1---------2.3.6-------2012 March----------N7000OXALC1-----------Open Europe----------------------------- Download (wipe)
I lost the triangle, lost root and gained a stock Galaxy Note.
Flashing stock Roms using PC Odin never gives you the triangle. Flashing custom kernels, Roms does.
chasmodo said:
Flashing stock Roms using PC Odin never gives you the triangle. Flashing custom kernels, Roms does.
Click to expand...
Click to collapse
Just as he said.. but if don't wana use Odin at all..then download the custom gb rom you want and download abyss3.9 kernel in your SD card..den do the following steps..
1.. go to recovery
2.. flash abyss kernel 3,9..
3.. don't reboot system...DONT...!!..
4.. go to advanced and select reboot recovery.. you will then reboot to abyss cwm recovery
5.. flash the gb rom you just downloaded..and reboot..
Okay first of all, flashing ANY STOCK ROM with PC Odin won't increase your binary counter, i.e. no yellow triangles.
Flashing ANYTHING (ROM obviously) with Mobile Odin won't give you the yellow triangle. Flashing non-stock or custom ROM with PC Odin will increase your binary counter.
So, just download any stock GB ROM from the development section and flash it with PC Odin. Simple!
I'm on Stock GB and wanna try CM9 ICS & other ICS roms... I know i have to flash Chainfire repack first, but which..?! There are more than one version...
kojinmalia said:
I'm on Stock GB and wanna try CM9 ICS & other ICS roms... I know i have to flash Chainfire repack first, but which..?! There are more than one version...
Click to expand...
Click to collapse
Just flash ICS repack from CF which is available in Forum.. .. i guess it doesn't matter which one.. i have been flashing the old one whenever i go back to GB then come to ICS... i have done it many times now without any problems..
The one i found says NO WAY TO RETURN TO GB. So please give me link to the one you installed...
1. You CAN go back. Don't worry!
Here:
http://forum.xda-developers.com/showpost.php?p=22758543&postcount=6
2. Flash this http://www.mirorii.com/fichier/3/501208/I9220LP1-N7000-ICS-REPACK-tar.html
Chainfire ICS LP1 Repack!
Just read the ICS Stunner forum.. It will help you a lot!
Thanks for all this. I tried all links and all goes @50ko/s Gonna search for it elsewhere.
kojinmalia said:
Thanks for all this. I tried all links and all goes @50ko/s Gonna search for it elsewhere.
Click to expand...
Click to collapse
DO NOT FLASH THE LP5 CHAINFIRE REPACK!! ONLY FLASH THE LP1 REPACK! THE LP1 IS THE ONE YOU WANT!
Sent from my GT-N7000 using Tapatalk
Thanks, now that's finally clear! But i couldn't find other links for it...
Sent from my GT-N7000 using XDA
Ok I'm getting it finally! But why 828mb on rapidshare & 790mb on all others... Scary!! So i flash this with odin (can't with mobile?) and right after, install stunner or other rom. Right?
Sent from my GT-N7000 using XDA
kojinmalia said:
Ok I'm getting it finally! But why 828mb on rapidshare & 790mb on all others... Scary!! So i flash this with odin (can't with mobile?) and right after, install stunner or other rom. Right?
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
Flash it with Mobile Odin (Pro recommended) keeping all the options of Everroot checked. DONT flash with PC odin ...u wont get root if you do that.
Reboot and let the rom settle. Then go to recovery and then flash Stunner or any other ics rom you want.
Cheers! Enjoy your Note.
Hit thanks if it helped
I'm late in the discussion but this topic interests me.
But why can't you just restore Nandroid back using CWM from your GingerBread backup Nandroid?
(you did Nandroid your previous GB rom before you went to ICS, correct?)
First i had a JB Rom on my GT-I9000 it got too hot using a app so i decided to flash CM9 on it after 2sec the installtion was aborted and i was thinking that it was trying to install CWM-Recovery but it didnt after 10min of waiting, i decided to pull the battery out. I tryed to start recovery mode but there was none. I used Odin and a pit file (Re-partion was checked) than i put a Devil 3 kernel on it. Recovery Mode was working but after i wiped everything and flashed Dark Knight 5.5 on it and clicked on reboot system now, i was sent back into recovery!!!!
Please help me to solve this problem.I am not a expert in android programm so please dont let it sound complicated
Thanks for your help.
I had this two before. Nothing would work to fix it. This is what I did
1. Flash back to stock 2.3.x with 512 pit
2. Boot into stock recovery and wipe data / factory reset
3. Pull battery and reboot into bootloader/download mode
4. Flash Devil kernel or semaphore tar with Odin.
5. Reboot into recovery and flash ROM of choice
6. Restore nandroid data through advanced restore or just start fresh.
7. Profiiit
Sent from my GT-I9000 using xda premium
One more question
AlwaysDroid said:
I had this two before. Nothing would work to fix it. This is what I did
1. Flash back to stock 2.3.x with 512 pit
2. Boot into stock recovery and wipe data / factory reset
3. Pull battery and reboot into bootloader/download mode
4. Flash Devil kernel or semaphore tar with Odin.
5. Reboot into recovery and flash ROM of choice
6. Restore nandroid data through advanced restore or just start fresh.
7. Profiiit
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
So do i need just the 512. tar file (i dont know where to download this! ) or stock rom too (I had 2.3.3 Gingerbread when i bought this phone)
Thanks for your help
Hey
theres a guide below..
Sent from my GT-I9000
Omg i worked
tchindalia said:
hey
theres a guide below..
Sent from my gt-i9000
Click to expand...
Click to collapse
thank u thank u thank u :d
Tibiak19 said:
So do i need just the 512. tar file (i dont know where to download this! ) or stock rom too (I had 2.3.3 Gingerbread when i bought this phone)
Thanks for your help
Click to expand...
Click to collapse
Samfirmware.com to download the stock ROM.
Pit files just tell Odin how to repartition the device when flashing. Should come with Odin when you download it. There should be an 80x as well, just use 512.
Then select to use xxxx512.pit
Flash ROM in PDA.
Sent from my GT-I9000 using xda premium
Try this!
Try this:
All you have to do is revert to an older version of clockworkmod, I used version 6.0.12 I believe.
the file name is: CWM6012-CM9-recovery so it might be that. Yep that's it, now i can finally rest
Thanks Byrkoet
http://forum.xda-developers.com/show...2#post39067132
Dear friends,
For first time i wonted to flash ROM. Phone is S5830 Ace. I done backup with CWM before.
I started with:
1. bοοt into CWM5 Recovery
2. wipe data/factory reset, wipe cache, wipe dalvik
But, my .zip file was included in .rar . I couldn do flash.
I started phone and he couldn't start, just try to start, samsung logo appears and than restart. I did restore, but its the same.
Please help, what to do?
download stocklite from here
get it in your sd-card
and flash it
or just simply flash a stock rom from odin
its no big deal mate! so dont freak out and welcome to xda
Flash stock via ODIN
tj_droid said:
Flash stock via ODIN
Click to expand...
Click to collapse
Im trying but without result. I have downloaded Apocalypse ROM, how to flash it from odin?
How to select ROM from odin?
Thanks all for fast answers.
shevchenko84 said:
Im trying but without result. I have downloaded Apocalypse ROM, how to flash it from odin?
How to select ROM from odin?
Thanks all for fast answers.
Click to expand...
Click to collapse
That type of rom is not to be flashed with odin ! You have to go to samfirmware download a stock one for s5830 put cooper ops on odin select one package and then select the tar file. Put your phone in download mode and flash it ! Search youtube for video tuturial there is plenty of them
Sent from my GT-I9830 using xda premium
SnowPluralism said:
That type of rom is not to be flashed with odin ! You have to go to samfirmware download a stock one for s5830 put cooper ops on odin select one package and then select the tar file. Put your phone in download mode and flash it ! Search youtube for video tuturial there is plenty of them
Sent from my GT-I9830 using xda premium
Click to expand...
Click to collapse
Im just downloadnig something whic is named S5830XWKPY. Thats it?
It says: an unamed file was not found
I just done it.
Now I lost CWM. I suppose that i have to again root phone and install CWM?
Thanks a lot to everybody!
shevchenko84 said:
I just done it.
Now I lost CWM. I suppose that i have to again root phone and install CWM?
Thanks a lot to everybody!
Click to expand...
Click to collapse
Yep
I have read:
http://forum.xda-developers.com/showthread.php?t=1424997
http://androidforums.com/galaxy-s2-international-all-things-root/578800-what-emmc-brickbug.html
http://forum.xda-developers.com/showthread.php?t=1693704
http://forum.xda-developers.com/showthread.php?t=1644364
My question: I have a SGN infected with the eMMC bug, and I want to upgrade it to the latest stock ROM. I know very little about flashing, and I know there are some risks when doing some things. I would like to know if the first link is safe for me, and which ROM I should use of the ones listed there (I live in The Netherlands). Do you guys have any tips or some guides made for the noobs among us?
that 1st link is the safest and best.
download the rom of. your choice. It. doesn't need to be of. your region. although you can check the latest firmware on www.samfirmware.com....
Once downloaded, use pc odin with the downloaded rom tar.md5 file selected in the pda tab. The connect the phone to pc in download mode and press start.
If you are upgrading to ics, then do not do any wipes, first flash a safe kernel...
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
that 1st link is the safest and best.
download the rom of. your choice. It. doesn't need to be of. your region. although you can check the latest firmware on www.samfirmware.com....
Once downloaded, use pc odin with the downloaded rom tar.md5 file selected in the pda tab. The connect the phone to pc in download mode and press start.
If you are upgrading to ics, then do not do any wipes, first flash a safe kernel...
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
:good:
by the way what's with nokiamodeln91 username.. hahahahaha.. you are in samsung thread.. hahahahaha.. but nice one man.. great help... keep it
nokiamodeln91 said:
that 1st link is the safest and best.
download the rom of. your choice. It. doesn't need to be of. your region. although you can check the latest firmware on LINK ....
Once downloaded, use pc odin with the downloaded rom tar.md5 file selected in the pda tab. The connect the phone to pc in download mode and press start.
If you are upgrading to ics, then do not do any wipes, first flash a safe kernel...
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks for replying. Good to know that that thread is safe, but what do you mean by flashing a safe kernel? Those terms mean nothing to me.
theres two way to flash ROM. 1 is using PC ODIN and the other one is CWM
Flashing Via PC ODIN .. you need to have two thing.. The Rom You Want to flash and the PC-ODIN software
Flashing Via CWM.. you need two things. You need to root your phone and you need to install CWM.
every rom comes with modem, kernel (the file that govern how to handle your phone cpu), csc... the kernel inside ics is known to have brickbug
theres no need to flash kernel if you are flashing Rom via PC ODIN... Flashing kernel is when you are using CWM....
mistajoe83 said:
:good:
by the way what's with nokiamodeln91 username.. hahahahaha.. you are in samsung thread.. hahahahaha.. but nice one man.. great help... keep it
Click to expand...
Click to collapse
tried a few usernames dint work. tried the Samsung too, na.. then nokia to the rescue.
Sent from my GT-N7000 using xda premium
mistajoe83 said:
theres two way to flash ROM. 1 is using PC ODIN and the other one is CWM
Flashing Via PC ODIN .. you need to have two thing.. The Rom You Want to flash and the PC-ODIN software
Flashing Via CWM.. you need two things. You need to root your phone and you need to install CWM.
every rom comes with modem, kernel (the file that govern how to handle your phone cpu), csc... the kernel inside ics is known to have brickbug
theres no need to flash kernel if you are flashing Rom via PC ODIN... Flashing kernel is when you are using CWM....
Click to expand...
Click to collapse
So, I can just flash any ROM using ODIN, and there will be no risk bricking my device?
If I flash a ROM, will I have a fresh install, and will my kernel also change so that I don't have the brickbug anymore?
hiddepolen said:
So, I can just flash any ROM using ODIN, and there will be no risk bricking my device?
If I flash a ROM, will I have a fresh install, and will my kernel also change so that I don't have the brickbug anymore?
Click to expand...
Click to collapse
yes you can flash any ROM using ODIN safely without bricking your device.
yes you will have a fresh install. your kernel will change too. as for the brickbug....
If you flash via PC ODIN then everything is stock to what you flashed.the kernel the firmware the csc the modem..all as stock provided....
1.If you flash ICS via PC-ODIN then your kernel also would be stock ics kernel that has brickbug..
Warning :
Don't wipe anything from stock ICS recovery
Don't factory reset/Hard reset on stock ICS.
Don't flash any Wipe version of ICS ROM
let say you want to flash Latest JB Rom but you are on ICS stock.
first thing you need to do is root your device ...install CWM.. Flash safe kernel
http://forum.xda-developers.com/showthread.php?t=1329360
let say ive rooted... installed CWM with safe kernel...
what i always do is everytime i want to flash new rom whatever rom it is...i flash Speedmod 3-15 (safe kernel) and go to Advance>reboot recovery and flash any rom i want so that im on the safe side without worrying what kernel im on.
2.If you flash GB than your kernel will be GB kernel which is safe to wipe..
if you want to flash custom rom from gb then you root your device and installed CWM and Flash since GB kernel is safe.
but.. let say u flashed ICS and wanted to go back to GB. then you are not safe anymore,,, that is why i always flashed Speedmod kernel 3-15 (safe kernel) and reboot recovery (by going to advance>rebootrecovery) and flashed any rom... that way im always sure that im in safe kernel when flashing Rom
mistajoe83 said:
yes you will have a fresh install. your kernel will change too. as for the brickbug....
If you flash via PC ODIN then everything is stock..If you flash ICS via PC-ODIN then your kernel also would be stock ics kernel that has brickbug.. if you flash GB than your kernel will be GB kernel which is safe to wipe..
Click to expand...
Click to collapse
Thanks so much, you are an incredible help. Slowly, I begin to understand everything !
hiddepolen said:
I have read:
http://forum.xda-developers.com/showthread.php?t=1424997
http://androidforums.com/galaxy-s2-international-all-things-root/578800-what-emmc-brickbug.html
http://forum.xda-developers.com/showthread.php?t=1693704
http://forum.xda-developers.com/showthread.php?t=1644364
My question: I have a SGN infected with the eMMC bug, and I want to upgrade it to the latest stock ROM. I know very little about flashing, and I know there are some risks when doing some things. I would like to know if the first link is safe for me, and which ROM I should use of the ones listed there (I live in The Netherlands). Do you guys have any tips or some guides made for the noobs among us?
Click to expand...
Click to collapse
You can download any stock rom you want from searching it on the forum then you can flash it through ODIN using your computer