Hello,
I had ICS through KIES (never rooted/never flashed). But now the phone is stuck at samsung logo and doesn't start up. I want to flash GB rom through ODIN.
Just wanted to know whether i can use a wipe rom. This is the rom im planning to use from dr.ketan's post -
N7000XXLC1_N7000OXALC1
Thanks for your time!
have you tried pulling the battery out and restarting after 10 minutes?
if that does not work, then yes, you can use that GB rom via odin.
This is common issue, Just put your device in download mode and flash GB ROM.
Dont worry even after that you may get same symptoms. then
Go to recovery and wipe cache and wipe data. Then it shud boot normally.
remember wipe cache and data only after flashing GB ROM.
wipe - nonwipe difference
praetorius - thanks, but it didnt work in my case
doctor ji, thanks, sorry i have one last question - whats the difference between wipe and non-wipe roms... what I have is a wipe rom so is it still safe to flash it, as my current rom i think is the dreaded lpy rom.
Apologies again for being such a n00b
--
I guess my question is with wipe roms does the wiping happen in ics or in gb :-s
ignore me
Hi,
Just did it after seeing that manloonw had the same problem.
My galaxy note is alive... :crying: (of joy)
Thanks to all the XDA posts and especially dr.Ketan's posts!
--had a md5 invalid message intially, but i unzipped the file again and it worked!
Logs-
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 is invalid.
<OSM> End...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> factoryfs.img
<ID:0/008> NAND Write Start!!
<ID:0/008> zImage
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> cache.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!
<ID:0/018> Added!!
<ID:0/018> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
dr.ketan said:
This is common issue, Just put your device in download mode and flash GB ROM.
Dont worry even after that you may get same symptoms. then
Go to recovery and wipe cache and wipe data. Then it shud boot normally.
remember wipe cache and data only after flashing GB ROM.
Click to expand...
Click to collapse
Why not dalvik cache too?
dr.ketan said:
This is common issue, Just put your device in download mode and flash GB ROM.
Dont worry even after that you may get same symptoms. then
Go to recovery and wipe cache and wipe data. Then it shud boot normally.
remember wipe cache and data only after flashing GB ROM.
Click to expand...
Click to collapse
Hi Dr. Ketan,
My Note is on stock ICS rooted LRG ROM. I have the CWM recovery installed. But for some reason when i press Vol up + Home + Power, it doesnt boot into recovery. The only way i can get into recovery is by opening CWM application and selecting "Boot into recovery". I'm not sure if my recovery is broken or if its a standard feature.
I would like to downgrade to KK2 or KK5 firmware using PC Odin. I know after installing GB ROM the next step involves "Wiping" for GB to boot properly (otherwise gets stuck on samsung animation). But until I boot theres no way to get into recovery. How do I go about it?
Many Thanks
Related
hi all,
i was on KL3, rooted, then KIES kept bothering me so i thought i'd upgrade to the new LA3 i think....
then the thing crashed and now all i get is the Firmware upgrade encounted an issue. PLease recovery mode in Kies and try again.
problem is, i cant get it to go into recovery mode?!??!?! (volume up, power?)
nothng works, KIes cant detect it, and cant upgrade anything, i am a total noob, and can only get into ODin mode..
HELP please?!?!?
what do i need to do, please step by step, what to download, what to press and whether i need to get a micro sd to install some firmware?
thankyou - urgent help needed!
First of all, relax
You said you can get into "Odin Mode"? I suppose that's download mode. Just go to this thread and everything is explained here. No need to worry
http://forum.xda-developers.com/showthread.php?t=1424997
Just flash another firmware (why not the latest) and everything will be just fine.
P.S. Once rooted, you should probably stay away from stock upgrades...
Press thanks if it helped
Recovery : vol up + home + power
If you get into recovery just wipe cache n wipe data
If error still there
Go to download :
vol dwn + home + power
Reflash new rom
Sent from my GT-N7000 using xda premium
this is all i get and gets stuck???
i chose this one: N7000XXLC1---------2.3.6-------2012 March----------N7000OXXLB3-----------France------------------------------------Download
went to bed for 2 hours and it didnt move...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLC1_N7000OXXLB3_N7000XXLB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
confirm you have close antivirus if running
Dont put ROM file too deep, better keep on Root folder e.g. C:/Folder/***.tar.md5
Dont use USB extension, attach USB cable direct to slot on PC, try using different slot (preferably back side PC)
N dont forget to put device in download mode.
Thankyou Dr.Ketan and eug3n91
worked after i switched to the onboard USB.
i guess thats probably why Kies failed too....
this site is fantastic, been a lurker for a while, but never needed to post until today and its proven to be very succesful with both of you helping out so quick.
cant thankyou enough!
Dr.Ketan I am facing the same problem and did exactly the same but this is all i get
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Set PIT file..
<ID:0/015> DO NOT TURN OFF TARGET!!
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> boot.bin
<ID:0/015> cache.img
<ID:0/015> factoryfs.img
same problem here. flashed ROCKET ROM but now i can just go into download mode and CWM. ICS roms stuck on NAND WRITE START and GB roms on FACTORYFS.IMG
I tried everything ever mentioned i guess:
-Tried fix it with KIES but it doesn't even find my device
-use different USB port
-install USB drivers new
-flash Q1_20110914_16GB.pit
-flash other kernel "CF-Root-SGN_XX_OXA_LPY-v5.3-CWM5"
-flash "N7000_XXKL8" where i have to flash three files with odin v1.85
-took the battery out for a longer time
-Flashed different Stock Roms (wipa and without wipe)
-flashed the Abyss Kernel 4.2 again
-flashed "Criskelo's Rom" with CMW
-Tried on different PC with Windows XP
Please there must be a way to help me and khok3893
ow1166 said:
same problem here. flashed ROCKET ROM but now i can just go into download mode and CWM. ICS roms stuck on NAND WRITE START and GB roms on FACTORYFS.IMG
I tried everything ever mentioned i guess:
-Tried fix it with KIES but it doesn't even find my device
-use different USB port
-install USB drivers new
-flash Q1_20110914_16GB.pit
-flash other kernel "CF-Root-SGN_XX_OXA_LPY-v5.3-CWM5"
-flash "N7000_XXKL8" where i have to flash three files with odin v1.85
-took the battery out for a longer time
-Flashed different Stock Roms (wipa and without wipe)
-flashed the Abyss Kernel 4.2 again
-flashed "Criskelo's Rom" with CMW
-Tried on different PC with Windows XP
Please there must be a way to help me and khok3893
Click to expand...
Click to collapse
I'm afraid this has to do with corrupted memory partitions. It's what devs called 'superbricks' if I'm not mistaking...
You could try a ROM with a PIT file, hoping that would repartition any bad sectors.
Again, I could be mistaken. Try to read some other threads around here. A lot of.others have also encountered this problem
khok3893 said:
<ID:0/015> factoryfs.img
Click to expand...
Click to collapse
When you stuck at factoryfs.img = system partition corrupted
I tried with PIT file (Q1_20110914_16GB.pit) and ICS LYP Rom and it stucks on "NAND WRITE START" that comes after "factoryfs.img" I even uses "re-partition" in Odin. Nothing works.....
I was trying to root my galaxy note, I download the rooted stock rom (N7000DXLC2) from here http://forum.xda-developers.com/showthread.php?t=1535025
but the odin failed and showing this
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000DXLC2.tar.md5 is valid.
<OSM> MODEM.tar.md5 is valid.
<OSM> CSC_N7000OLBLC2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> factoryfs.img
<ID:0/013> NAND Write Start!!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
then my phone can't boot anymore, it jus stuck at the samsung n7000 screen,
i tried to download stock rom and flash again, but it failed like above,
and when i go try to flash the kernel, it success to go to the recovery mode,
but it showing error like
E:Error in /cache/recovery/sec_csc.zip (status 7)
And i maybe forgot to enable usb debugging before i root, is this the cause? how i enable it now?
what can i do now? I tried to change port, change pc, uninstall kies, reinstall driver, close antivirus, and all doesn't work, please help...
To be sure, take out all unnecessary USB devices and use a USB port that's directly attached to your motherboard. Without your phone attached load Odin and load all files. Put the phone in Download mode and hook it up to your pc. When Odin recognizes it then try and flash again.
Make sure there's not a trace of Kies on the pc, just have the drivers installed.
USB debugging should not have to be enabled. There's no way of enabling it without booting up the phone and setting it in the options anyway.
bioweb said:
To be sure, take out all unnecessary USB devices and use a USB port that's directly attached to your motherboard. Without your phone attached load Odin and load all files. Put the phone in Download mode and hook it up to your pc. When Odin recognizes it then try and flash again.
Make sure there's not a trace of Kies on the pc, just have the drivers installed.
USB debugging should not have to be enabled. There's no way of enabling it without booting up the phone and set it in the options anyway.
Click to expand...
Click to collapse
I tried that, and I uninstalled the kies,
but the odin still showing the same error.
PROBLEM SOLVED
for who facing the same problem, just include a pit file in PIT,u can find it here
http://forum.xda-developers.com/showpost.php?p=23234683&postcount=10
solving this for whole day,thanks god it worked......
17n337 said:
PROBLEM SOLVED
for who facing the same problem, just include a pit file in PIT,u can find it here
http://forum.xda-developers.com/showpost.php?p=23234683&postcount=10
solving this for whole day,thanks god it worked......
Click to expand...
Click to collapse
CAUTION : Just dont go on blindly flashing the PIT file. Its a repartitioning file. To be used only when your partition is corrupted.
Galaxy Note stuck
hello,
I was running stock ICS 4.0.4 on my GT-N7000. I rooted my device. Took the titanium backup.
After this, i opened odin. Under phone i provided the path to my downloaded ICS 4.0.4 file. Odin started flashing the device but operation failed showing:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLRB_N7000ODDLR4_N7000DDLR1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> factoryfs.img
<ID:0/010> NAND Write Start!!
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010>
<ID:0/010> Receive Response form LOKE
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried many times but showing the same error everytime.
I am not able to go into the recovery mode......although i can go into the download mode.
When i reboot it says "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again." There is no samsung logo or GT-N7000 logo when you reboot your phone. You only see this warning.
I have some imp data on my internal memory(Phone storage). I have to save that data. Please please please help me out. Is there any way to recover phone storage data???
Can anyone explain my current situation...???
vinay28761 said:
I was running stock ICS 4.0.4 on my GT-N7000. I rooted my device. Took the titanium backup.
...
After this, i opened odin. Under phone i provided the path to my downloaded ICS 4.0.4 file. Odin started flashing the device but
...
<OSM> N7000DDLRB_N7000ODDLR4_N7000DDLR1_HOME.tar.md5 is valid.
...
Can anyone explain my current situation...???
Click to expand...
Click to collapse
First: this thread is marked as solved since april. Chances are very low for a reaction (but at least I did)
Second: Make a new one in Q&A
Third: What do you mean with "Took the TB"? Especially when you flash a new Stock Rom after
Fourth: Did you put the tar-file under "Phone"? Should be "PDA".
Fifth: Read a lot in the stickies here - good start for handling Odin is Dr. Ketan's thread
Sixth: your current situation might result from not reading enough. I hope you didn't brick your device and can restore a running Rom with the instructions from the stickies. Good Luck
how exactly did you reach this situation?
Did you resolve this ?
vinay28761 said:
hello,
I was running stock ICS 4.0.4 on my GT-N7000. I rooted my device. Took the titanium backup.
After this, i opened odin. Under phone i provided the path to my downloaded ICS 4.0.4 file. Odin started flashing the device but operation failed showing:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLRB_N7000ODDLR4_N7000DDLR1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> factoryfs.img
<ID:0/010> NAND Write Start!!
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010>
<ID:0/010> Receive Response form LOKE
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried many times but showing the same error everytime.
I am not able to go into the recovery mode......although i can go into the download mode.
When i reboot it says "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again." There is no samsung logo or GT-N7000 logo when you reboot your phone. You only see this warning.
I have some imp data on my internal memory(Phone storage). I have to save that data. Please please please help me out. Is there any way to recover phone storage data???
Can anyone explain my current situation...???
Click to expand...
Click to collapse
@vinay28761
I have your exact problem. Phone came to me with problem of hanging on Samsung N7000 Logo.
After flash everything, it shows error, exactly like yours.
Were you able to fix it? How ?
dannyogolo said:
@vinay28761
I have your exact problem. Phone came to me with problem of hanging on Samsung N7000 Logo.
After flash everything, it shows error, exactly like yours.
Were you able to fix it? How ?
Click to expand...
Click to collapse
Yes, i resolved it. I just followed dr. ketan's guide to flash through ODIN properly and exactly as described. I would request you to do the same.
Hope it solves your error too. If not, please post your screenshots.
could you jst give me details about dis nand write fail problem?i m having same problem in my gt n7000
Does anyone know where i can download PIT file for samsung gts6802 and a bootloader?
It woulb be very helpful. Thank You
Hay guys.Sorry to open new thread,but I really need help.I got galaxy note (N7000) and the problem is that is stuck ob samsung boot logo.I have tried every single solution I could find on the web,but with no luck.I dont even know on what rom is ATM because i got it in this condition.All I know is that it was bought in Austria
PLEASE HELP!!!!
Have you tried booting it into recovery mode or download mode?
Recovery: Press Home + Volume Up + Power On. Stay pressed until GT-N7000 logo comes up.
Download: Press Home + Volume Down + Power On. Stay pressed until GT-N7000 logo comes up.
Nibb31 said:
Have you tried booting it into recovery mode or download mode?
Recovery: Press Home + Volume Up + Power On. Stay pressed until GT-N7000 logo comes up.
Download: Press Home + Volume Down + Power On. Stay pressed until GT-N7000 logo comes up.
Click to expand...
Click to collapse
i can only get it in download mode.when i try to start recovery mode the phone stops at samsung logo and just hangs there all day
Go to the download mode, flash a stock ROM for your region using PC ODIN and go thru dr.ketan's thread in the original Android development forum. Flash a stock ROM and then flash a kernel like the PhilZ kernel that you'll find in the thread on how to root and this boot loop bug will be out forever.
thanks for your effort Varad,but still not luck.I guess I got a pretty expensive paper weight :crying:
bizzare187 said:
thanks for your effort Varad,but still not luck.I guess I got a pretty expensive paper weight :crying:
Click to expand...
Click to collapse
post the result or screenshot of pc odin or just mention where is it getting stuck while flashing.
flashing goes without problem,but when the phone reboots it stucks on samsung logo
bizzare187 said:
flashing goes without problem,but when the phone reboots it stucks on samsung logo
Click to expand...
Click to collapse
do you get message on pc oding saying success1/failed0?
yes i get that message and then phone reboots.and it stucks
bizzare187 said:
yes i get that message and then phone reboots.and it stucks
Click to expand...
Click to collapse
have you tried flashing again?
treacherous_hawk said:
have you tried flashing again?
Click to expand...
Click to collapse
yes i did.i will do it again now and post odin messages
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000OXXLP7_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> cache.img
<ID:0/008> NAND Write Start!!
<ID:0/008> hidden.img
<ID:0/008> factoryfs.img
<ID:0/008> zImage
<ID:0/008> modem.bin
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!
And yet it is stuck on the boot logo? Well that thing about the paperweight seems to be right now
Varad297 said:
And yet it is stuck on the boot logo? Well that thing about the paperweight seems to be right now
Click to expand...
Click to collapse
friend told me to try a full wipe rom.is it a good idea?if it is,i just wanna know if it is flashable via odin.
Look haven't you wiped data before flashing ROMs? And yes any full wipe ROM with a .tar file is flashable via odin. But a full wipe ROM is of no use if you wipe data and cache before a flash, it's the same.
Varad297 said:
Look haven't you wiped data before flashing ROMs? And yes any full wipe ROM with a .tar file is flashable via odin. But a full wipe ROM is of no use if you wipe data and cache before a flash, it's the same.
Click to expand...
Click to collapse
no i havent wiped anything.i got the phone in this condition.i can only enter download mode.when i try to enter recovery mode the phone stucks at logo.same thing if i just try to turn it on.
Yes try a full wipe ROM then, no harm in trying...
tried the wipe ROM.still no luck
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXKL8_CL840182_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXKL8_REV_05_CL1089796.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXAKL8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> Sbl.bin
<ID:0/008> param.lfs
<ID:0/008> zImage
<ID:0/008> factoryfs.img
<ID:0/008> data.img
<ID:0/008> cache.img
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008> Receive Response form LOKE
<ID:0/008> cache.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!
still under warranty?
Get to the service center...that's the only way i see out of this...
treacherous_hawk said:
still under warranty?
Click to expand...
Click to collapse
no,warranty is expired
Varad297 said:
Get to the service center...that's the only way i see out of this...
Click to expand...
Click to collapse
thanks a lot everybody for trying
Hi
Need some help.
I had sweet rom 11 on my samsung galaxy note n7000. wanted to try cyanogenmod. wasent happy with it. wanted to go back to sweetrom.
So I used odin 3 1.85. (have installed usb drivers). to unroot my n7000 and come back to stock jelly bean by putting the .tar stock file in PDA. And wanted from there to root + cmw and then flash sweetrom again.
But when I used odin and flashed stock jelly bean it went into bootloop. tried to wipe cache(could not find wipe dalvik i stock menu) and reboot but not sucsess. Now it only show " Samsung Galaxy Note gt-n7000" logo. Tried to flash another time but stil bootloop again
On odin it says pass and this is what the odlin log said: se below
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT5_N7000XXLT3_N7000NEELT2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> cache.img
<ID:0/005> NAND Write Start!!
<ID:0/005> factoryfs.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> zImage
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
What do I do now. Hope somebody can help me. I have only flashed sweetrom and cyonogenmod based on android 4.2.2
saw just a youtube video which used 3 files pda phone and csc when repairing soft brick. But dont know where to find them. the downloadlink in the Youtube video does not work
https://www.youtube.com/watch?v=FKrNb2q5HFM
Help much appreaceted !
Boot into recovery and do wipe data/ factory reset
Sent from my GT-N7000 using Tapatalk 2
Resolved
forest1971 said:
Boot into recovery and do wipe data/ factory reset
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thanks mate for quick response
Just saw a video with zedomax. he said to wipe cache and dalvik. that did not work. Just read that i could wipe data reset and woala!
But Youre response was much appreaceted
Thanks alot
Everything works now
Btw, your way of changing rom is too complicated. The best way is to use custom recovery to wipe cache and data and then just flash the custom rom.zip. no need to use odin.
Sent from my GT-N7000 using Tapatalk 2
i have once rooted my N7000 after using for few months, i returned to original Jellybean OS
"""N7000DDLSC_N7000ODDLSC_N7000DDLS6_HOME.tar"""
But now my phone is not working ""No Recovery mode, only download mode""
tried to flash a ""TWRP CWM---PhilZ-cwm6-DDLSC-ODD-5.06.1.tar,,
&,,CF-Root-SGN_XX_OXA_LPY-v5.3-CWM5"" but both failed via ""Odin_v3.04""
now i am middle of nowhere, only samsung logo & an yellow triangle.
Tried to flash original Jellybean OS several times,
""" Custom binary count is (6):crying:
Odin Dispaly this message
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLSC_N7000ODDLSC_N7000DDLS6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> factoryfs.img
<ID:0/007> NAND Write Start!!
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Read almost everything, tried everything one thing came across (emmc bug ????), dont want to hard brick my phone, kindly suggest me something to do with my phone,,
plz help me
Kill all kies procesess using task manager if running in the back ground. Use main usb ports, original USB cable.. Try again to flash the Philz kernel using odin 1.85.. If that fails try a different pc. Install the samsung USB driver using this
Thanks for reply Buddy, can you plzz guide me the exact or specific philZ kernel + recovery to flash via odin 1.85...:crying:
i have already tried most of it,,, which i used earlier for rooting my phone....
erosnyx said:
Thanks for reply Buddy, can you plzz guide me the exact or specific philZ kernel + recovery to flash via odin 1.85...:crying:
i have already tried most of it,,, which i used earlier for rooting my phone....
Click to expand...
Click to collapse
Go to Philz kernel thread for n7000 and read the 3rd post.. Links are there.. Try the xxlta version..