Hay guys.Sorry to open new thread,but I really need help.I got galaxy note (N7000) and the problem is that is stuck ob samsung boot logo.I have tried every single solution I could find on the web,but with no luck.I dont even know on what rom is ATM because i got it in this condition.All I know is that it was bought in Austria
PLEASE HELP!!!!
Have you tried booting it into recovery mode or download mode?
Recovery: Press Home + Volume Up + Power On. Stay pressed until GT-N7000 logo comes up.
Download: Press Home + Volume Down + Power On. Stay pressed until GT-N7000 logo comes up.
Nibb31 said:
Have you tried booting it into recovery mode or download mode?
Recovery: Press Home + Volume Up + Power On. Stay pressed until GT-N7000 logo comes up.
Download: Press Home + Volume Down + Power On. Stay pressed until GT-N7000 logo comes up.
Click to expand...
Click to collapse
i can only get it in download mode.when i try to start recovery mode the phone stops at samsung logo and just hangs there all day
Go to the download mode, flash a stock ROM for your region using PC ODIN and go thru dr.ketan's thread in the original Android development forum. Flash a stock ROM and then flash a kernel like the PhilZ kernel that you'll find in the thread on how to root and this boot loop bug will be out forever.
thanks for your effort Varad,but still not luck.I guess I got a pretty expensive paper weight :crying:
bizzare187 said:
thanks for your effort Varad,but still not luck.I guess I got a pretty expensive paper weight :crying:
Click to expand...
Click to collapse
post the result or screenshot of pc odin or just mention where is it getting stuck while flashing.
flashing goes without problem,but when the phone reboots it stucks on samsung logo
bizzare187 said:
flashing goes without problem,but when the phone reboots it stucks on samsung logo
Click to expand...
Click to collapse
do you get message on pc oding saying success1/failed0?
yes i get that message and then phone reboots.and it stucks
bizzare187 said:
yes i get that message and then phone reboots.and it stucks
Click to expand...
Click to collapse
have you tried flashing again?
treacherous_hawk said:
have you tried flashing again?
Click to expand...
Click to collapse
yes i did.i will do it again now and post odin messages
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000OXXLP7_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> cache.img
<ID:0/008> NAND Write Start!!
<ID:0/008> hidden.img
<ID:0/008> factoryfs.img
<ID:0/008> zImage
<ID:0/008> modem.bin
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!
And yet it is stuck on the boot logo? Well that thing about the paperweight seems to be right now
Varad297 said:
And yet it is stuck on the boot logo? Well that thing about the paperweight seems to be right now
Click to expand...
Click to collapse
friend told me to try a full wipe rom.is it a good idea?if it is,i just wanna know if it is flashable via odin.
Look haven't you wiped data before flashing ROMs? And yes any full wipe ROM with a .tar file is flashable via odin. But a full wipe ROM is of no use if you wipe data and cache before a flash, it's the same.
Varad297 said:
Look haven't you wiped data before flashing ROMs? And yes any full wipe ROM with a .tar file is flashable via odin. But a full wipe ROM is of no use if you wipe data and cache before a flash, it's the same.
Click to expand...
Click to collapse
no i havent wiped anything.i got the phone in this condition.i can only enter download mode.when i try to enter recovery mode the phone stucks at logo.same thing if i just try to turn it on.
Yes try a full wipe ROM then, no harm in trying...
tried the wipe ROM.still no luck
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXKL8_CL840182_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXKL8_REV_05_CL1089796.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXAKL8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> Sbl.bin
<ID:0/008> param.lfs
<ID:0/008> zImage
<ID:0/008> factoryfs.img
<ID:0/008> data.img
<ID:0/008> cache.img
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008> Receive Response form LOKE
<ID:0/008> cache.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!
still under warranty?
Get to the service center...that's the only way i see out of this...
treacherous_hawk said:
still under warranty?
Click to expand...
Click to collapse
no,warranty is expired
Varad297 said:
Get to the service center...that's the only way i see out of this...
Click to expand...
Click to collapse
thanks a lot everybody for trying
Related
Hello XDA,
I think I messed up my phone pretty bad. Firstly, I tried putting in CWM kernel, my device was at 2.2.? that time and it was a 2.3 kernel. Device wouldnt boot, tried installing some 2.2 kernels but that simply didn't work (with Heimdall).
I tried installing I9000XWJVH_ODKJV3_XXJVO with Odin. It managed to get to the Galaxy S video but not any futher. And this is where it starts to get strange; I ticked "Phone Bootloader update" and "Phone ESF clear" and right now it has a black screen... but all the sound is working, and I still can get into download mode.
Ive tried most things, but without succes. Does any of you have an idea?
edit: so after 10 minutes of pretending to be dead, it resurrected. I tried rebooting (the fw was 2.3.3 and kernal was something rooted) to install CWM but now it wont respond anymore?
If you can access Download mode with 3-buttons combo you can odin-flash a stock rom (JVT for example), reboot and flash a custom kernel to have root and CWM recovery.
http://forum.xda-developers.com/showthread.php?t=1134975
cabessius said:
If you can access Download mode with 3-buttons combo you can odin-flash a stock rom (JVT for example), reboot and flash a custom kernel to have root and CWM recovery.
Click to expand...
Click to collapse
Problem is that I cant acces the CWM. Well, atleast I can't see it. I tried flashing CWM on it, Heimdall said it went OK. When I boot, I get a black screen, hear the boot music and see the touchbuttons lit up. The only thing that wont respond is the screen, I can only to get it to work when I check my pit using Heimdall fronted and let that program reboot my device.
OK, the result:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XXJVR_CL425308_REV03_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVR_REV_00_CL1044379.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> Sbl.bin
<ID:0/008> param.lfs
<ID:0/008> factoryfs.rfs
<ID:0/008> dbdata.rfs
<ID:0/008> cache.rfs
<ID:0/008> zImage
<ID:0/008> modem.bin
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008>
<ID:0/008> Receive Response form LOKE
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
Does anyone have a clue?
Still noone has a clue?
Do like above poster said and try to access download mode, done by either volume down, home, power, all together or by using a jig if that doesnt work. Even if you screen is not displaying anything hook it up to odin and see if odin detects it. Youll know if it does because a com port will turn yellow. If it does flash back to stock and repartition with 512pit.
hi guys,
my phone doen't work anymore..
when i press the power button nothing happens.
when i try to get into odin mode nothing happens.
when i plug in usb cable nothing happens.
its totally dead.
anyone idea what i can do?
or shall i send it to samsung?
thanks
lol4it said:
hi guys,
my phone doen't work anymore..
when i press the power button nothing happens.
when i try to get into odin mode nothing happens.
when i plug in usb cable nothing happens.
its totally dead.
anyone idea what i can do?
or shall i send it to samsung?
thanks
Click to expand...
Click to collapse
What exactly did you do to arrive at that point?
Sent from my GT-N7000 using Tapatalk 2
tried to flash using odin 1.85
ehmmm maybe try to charge battery. And sometimes phone works but screen isnt, try to go in download mode and to check is it connecting to odin even if screen is black ;D gl
batterie is charged.
already tried everything i know
i dont think so that after flashing with 1.85 odin you would get hard brick, i think that you messed up with files in not right sections and baam- brick :/
yes youre right
i just plugged into my pc and windows is searching for samsung mobile usb composite device drivers..
and now finaly odin found it too
i think i just paniced too hard...
where can i get a original firmware?
lol4it said:
yes youre right
i just plugged into my pc and windows is searching for samsung mobile usb composite device drivers..
and now finaly odin found it too
i think i just paniced too hard...
where can i get a original firmware?
Click to expand...
Click to collapse
www.sammobile.com all official firmwares ;D
ok gonna try:
GT-N7000 N7000XXLPY 4.0.3 2012 May N7000OXALPY Open Germany Download Unlock
(got vodafone germany)
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
lol4it said:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
you extracted zip file? you need to put .tar file at PDA ^^
ok
now my pc find my phone as unknown device -.-
and odin nothign..
ok worked now:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
but when i press power button still black screen??
EDIT: do i have to change standard settings like re-partition or flash lock?
lol4it said:
ok worked now:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
but when i press power button still black screen??
EDIT: do i have to change standard settings like re-partition or flash lock?
Click to expand...
Click to collapse
i didnt change settings like re-partition and etc. You fcked up something, a lot of people flashed without problems
yes i know =(
but i dont think my screen is broken..
wtf is this?? someone must help me
i got sound and everthing but dat screen is BLACK
Sorry mate phone had dont suppose u would sell as need screen for mine as drop it
Sent from my GT-N7000 using xda premium
Tried to flash aokp jb 4.1.2 milestone1 rom on my galaxy note ics 4.0.4.Launched cwm recovery mode and wiped data,which went off fine but when I flashed the aokp milestone 1 rom the whole thing stuck for few minutes and suddenly the screen went blank.I waited long hoping it would restart... but it didnt.Opened the battery,reinstall it and tried to switch on but failed..I also tried to launch the Cwm recovery ,also tried the download mode but the phone refused to start.... please help....
dead battery?
nokiamodeln91 said:
dead battery?
Click to expand...
Click to collapse
No... I charged the phone before proceeding....it was around 90-95% when I started....!!!
after i wrongly flshed criskelo rom(isntantly flashed rom in cmw whit out anything i forgoted ) my phone can't boot!
stuck at samsung galaxy notetryed every rom and...
after wrongly..! i followed root galaxy note .com steps exactly
event can't boot whit parandroid rom that i did tryed befor that!
trying too unroot to STOCK GB whit ODIN http://rootgalaxynote.com/galaxy-note-unroot/how-to-unroot-galaxy-note-gt-n7000/
kamranhaghighi said:
after i wrongly flshed criskelo rom(isntantly flashed rom in cmw whit out anything i forgoted ) my phone can't boot!
stuck at samsung galaxy notetryed every rom and...
after wrongly..! i followed root galaxy note .com steps exactly
event can't boot whit parandroid rom that i did tryed befor that!
trying too unroot to STOCK GB whit ODIN http://rootgalaxynote.com/galaxy-note-unroot/how-to-unroot-galaxy-note-gt-n7000/
Click to expand...
Click to collapse
Flash gb rom by using PC ODIN. After flashing gb rom go to recovery and wipe data and cache. Try this method.
ty but can u give me a link? i jsut founded this http://forum.xda-developers.com/showthread.php?t=1424997
i can't download but i did 1 time and can't pause and download speed is 2kb/s:| its 3:50 am and i jsut waiting for linK plz somone give me one tomarow i most go for my wimax because it had delay for 8 days and still waiting
any GB/\ ROM? i tryed a rocket rom GB from CWM but still stuck anyway im download ODIN version and waiting to download!
or stock?
kamranhaghighi said:
any GB/\ ROM? i tryed a rocket rom GB from CWM but still stuck anyway im download ODIN version and waiting to download!
or stock?
Click to expand...
Click to collapse
You must flash stock GB rom only, using odin.
jeetu1981 said:
You must flash stock GB rom only, using odin.
Click to expand...
Click to collapse
+1, yes PC ODIN only
Dont flash ics rom and do the wiping in data, it will hardbrick your phone. WARNING DONT WIPE IN ICS RECOVERY DATA OR FACTOCRY RESET OR DO NANDROID IT WILL SUPERBRICK YOUR PHONE.o
ok can u give me a link plz fast! and superbrick is unfixable?
kamranhaghighi said:
ok can u give me a link plz fast! and superbrick is unfixable?
Click to expand...
Click to collapse
This link might be helpful....its a pre rooted gb rom thread, can b used in pc odin....
All d best...!!!:good::good::good:
XDA Thread:
http://forum.xda-developers.com/showthread.php?t=1535025
thanks downloading no wipe
GOD WHY? all links are from hotfile ;( unluky badly unluky
this http://forum.xda-developers.com/showpost.php?p=25289773&postcount=207 saved me
i'm following this video now whit my 4-10kb/s net speed:| it takes 1h to load i can't wait for my wimax!
http://www.youtube.com/watch?v=ehXcnqntsro
afte that i see someting like isntalling updates than it stuck at galaxy note n7000 again
can i return my phone? some 1 help me plz
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000XXLA6.tar.md5 is valid.
<OSM> MODEM.tar.md5 is valid.
<OSM> CSC_N7000XEULA1_XEU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> hidden.img
<ID:0/003> zImage
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response form LOKE
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
thats log but still stuck at samsung galaxy note n-700 logo
PLZ i wont lose my 1300$ expancive device
kamranhaghighi said:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000XXLA6.tar.md5 is valid.
<OSM> MODEM.tar.md5 is valid.
<OSM> CSC_N7000XEULA1_XEU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> hidden.img
<ID:0/003> zImage
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response form LOKE
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
thats log but still stuck at samsung galaxy note n-700 logo
PLZ i wont lose my 1300$ expancive device
Click to expand...
Click to collapse
Stuck at Samsung logo is normal if you flash GB rom over ICS, just go to recovery (vol up+ home + power) and perform wipe and reboot.
As you are on Gingerbread now, it is safe to perform full wipe in stock recovery.
jeetu1981 said:
Stuck at Samsung logo is normal if you flash GB rom over ICS, just go to recovery (vol up+ home + power) and perform wipe and reboot.
Click to expand...
Click to collapse
This will solve your issue
Sent from my GT-N7000 using xda premium
THANKS REALLY but if not work can i pm u?^_^
did a wipedata/factory reset in stock recovery but still stuck at samsung galaxy note GT-N7000
kamranhaghighi said:
did a wipedata/factory reset in stock recovery but still stuck at samsung galaxy note GT-N7000
Click to expand...
Click to collapse
replied to your pm, please check it.
and one mroe thing
i did this! Nandroid Backup and Restore:
You are able to do Full Nandroid Backups on CF-Root Kernel. But you have to restore them using Abyss Kernel 4.2!!!
If you try to Restore with CF-Root, your Restore will hang up and you will at least lose Root
(befor lfashing GB whit odin!
waiting to recive ur repalay! it takes long time whit irans net:S
I have a Galaxy Note which has never been rooted and has the factory Gingerbread ROM running.
This morning it worked fine, then a couple of hours later the screen was black and I couldn't turn it on. So I removed and replaced the battery and turned the phone on. Ever since then, and no matter how many times I turn it off/on, it just freezes on the Samsung logo screen with the logo fading in/out.
What's the solution and what has gone wrong with it?
EViS said:
I have a Galaxy Note which has never been rooted and has the factory Gingerbread ROM running.
This morning it worked fine, then a couple of hours later the screen was black and I couldn't turn it on. So I removed and replaced the battery and turned the phone on. Ever since then, and no matter how many times I turn it off/on, it just freezes on the Samsung logo screen with the logo fading in/out.
What's the solution and what has gone wrong with it?
Click to expand...
Click to collapse
I would suggest booting into recovery and doing a factory reset. If that doesn't work use Odin to reflash the stock firmware, and see if that fixes things.
Sent from my SCH-I535 using xda premium
My phone is still in warranty. Am I right in thinking that using ODIN will void the warranty?
How do you boot into recovery on a factory ROM?
instal a stok rom with odin
EViS said:
My phone is still in warranty. Am I right in thinking that using ODIN will void the warranty?
How do you boot into recovery on a factory ROM?
Click to expand...
Click to collapse
Get a stock rom from dr. Ketan's thread in the original development. Press volume down+power+home buttons to boot into download mode then you can flash the rom you got using pc odin. It won't affect the warranty as it will not raise the counter and because you are flashing a stock rom
Sent from my GT-N7000 using xda app-developers app
What could have caused this crash? My only concern is that it could be a hardware memory fault, hence it would be worth sending it out to Samsung just in case.
Just flashed a stock UK ROM via PC Odin.
It showed Pass with the following Messages:
Code:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA6_N7000XXLA4_N7000XEULA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> cache.img
<ID:0/009> NAND Write Start!!
<ID:0/009> factoryfs.img
<ID:0/009> hidden.img
<ID:0/009> modem.bin
<ID:0/009> zImage
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
However, upon booting the phone is still stuck on the Samsung logo . Any further suggestions?
EViS said:
Just flashed a stock UK ROM via PC Odin.
It showed Pass with the following Messages:
Code:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA6_N7000XXLA4_N7000XEULA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> cache.img
<ID:0/009> NAND Write Start!!
<ID:0/009> factoryfs.img
<ID:0/009> hidden.img
<ID:0/009> modem.bin
<ID:0/009> zImage
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
However, upon booting the phone is still stuck on the Samsung logo . Any further suggestions?
Click to expand...
Click to collapse
Now that you have flashed the stock image, boot into recovery and try a factory reset again.
A factory reset fixed it! Why did I have to do a factory reset AFTER installing the new ROM? Why didn't the new ROM installation work on its own? Looking for a technical answer here .
May be the battery went dead because of which the some data got corrupted.
If I am not wrong it was stuck at the Samsung glowing logo?
data corruption causes boot loops and a factory reset will solve it
the rom you installed was a non wipe rom which does not do a wipe and just upgrades the os to stock so the corrupted data still remained. thus required a reset
Thank you for the explanation .
nokiamodeln91 said:
May be the battery went dead because of which the some data got corrupted.
If I am not wrong it was stuck at the Samsung glowing logo?
data corruption causes boot loops and a factory reset will solve it
the rom you installed was a non wipe rom which does not do a wipe and just upgrades the os to stock so the corrupted data still remained. thus required a reset
Click to expand...
Click to collapse
good explanation:good:
help please i got this unit stuck on upgrade screen
history:
the unit had too many pattern attempts then i tried hard resetting it by using the combination keys, but then after accessing the menu for hard resetting, when i press vol - to choose the reformat or factory reset (somthing like that i forgot) then it displayed forced uplaod mode by pressing keys. then i removed the battery and turned it on with just the power button, but it entered the hard reset menu again. i thought the volume keys were shorted so i removed them, but even if i have removed all the keys still stuck on the hard reset screen. then i tried connecting it to kies and one time it was detected, but it turned off then i showed that screen. it can be detected by my computer but not by kies or odin or any other flashers i have here.
up for this post can anybody help me pls?
Stuck on Upgrade Logo
chunkiebone said:
up for this post can anybody help me pls?
Click to expand...
Click to collapse
Mine got this problem too, any help guys?? thanks in advance
asukaragnaboy said:
Mine got this problem too, any help guys?? thanks in advance
Click to expand...
Click to collapse
if you are getting an "UPGRADE" screen, it means you have failed/unsusessfull flash and you are still in download mode, so just connect to fresh/reboot Odin and flash again recovery or flash WF07 ROM to recover
xsenman said:
if you are getting an "UPGRADE" screen, it means you have failed/unsusessfull flash and you are still in download mode, so just connect to fresh/reboot Odin and flash again recovery or flash WF07 ROM to recover
Click to expand...
Click to collapse
nope. my phone fully flashes whenever i flash it. odin always says completed. problem is that when the phone restarts, it's working ok until i remove it from cable. when i unplug it to cable, after a few minutes it turns off and goes to the never ending loop again (samsung logo, the first one with circle) or if i unplug it and charge it on a wall charger it turns off and guess what, it returns to the same loop again.
EDIT:
odin logs for reference
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELL4_I9300H3GELL1_I9300NELK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> system.img
<ID:0/006> NAND Write Start!!
<ID:0/006> boot.img
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> recovery.img
<ID:0/006> modem.bin
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Removed!!
<ID:0/007> Added!!