Database Develop

[Q] Root

Hello XDA,
I think I messed up my phone pretty bad. Firstly, I tried putting in CWM kernel, my device was at 2.2.? that time and it was a 2.3 kernel. Device wouldnt boot, tried installing some 2.2 kernels but that simply didn't work (with Heimdall).
I tried installing I9000XWJVH_ODKJV3_XXJVO with Odin. It managed to get to the Galaxy S video but not any futher. And this is where it starts to get strange; I ticked "Phone Bootloader update" and "Phone ESF clear" and right now it has a black screen... but all the sound is working, and I still can get into download mode.
Ive tried most things, but without succes. Does any of you have an idea?
edit: so after 10 minutes of pretending to be dead, it resurrected. I tried rebooting (the fw was 2.3.3 and kernal was something rooted) to install CWM but now it wont respond anymore?

If you can access Download mode with 3-buttons combo you can odin-flash a stock rom (JVT for example), reboot and flash a custom kernel to have root and CWM recovery.

http://forum.xda-developers.com/showthread.php?t=1134975

cabessius said:
If you can access Download mode with 3-buttons combo you can odin-flash a stock rom (JVT for example), reboot and flash a custom kernel to have root and CWM recovery.
Click to expand...
Click to collapse
Problem is that I cant acces the CWM. Well, atleast I can't see it. I tried flashing CWM on it, Heimdall said it went OK. When I boot, I get a black screen, hear the boot music and see the touchbuttons lit up. The only thing that wont respond is the screen, I can only to get it to work when I check my pit using Heimdall fronted and let that program reboot my device.
OK, the result:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XXJVR_CL425308_REV03_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVR_REV_00_CL1044379.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> Sbl.bin
<ID:0/008> param.lfs
<ID:0/008> factoryfs.rfs
<ID:0/008> dbdata.rfs
<ID:0/008> cache.rfs
<ID:0/008> zImage
<ID:0/008> modem.bin
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008>
<ID:0/008> Receive Response form LOKE
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
Does anyone have a clue?

Still noone has a clue?

Do like above poster said and try to access download mode, done by either volume down, home, power, all together or by using a jig if that doesnt work. Even if you screen is not displaying anything hook it up to odin and see if odin detects it. Youll know if it does because a com port will turn yellow. If it does flash back to stock and repartition with 512pit.

Full/Hard Bricked Galaxy Note

hi guys,
my phone doen't work anymore..
when i press the power button nothing happens.
when i try to get into odin mode nothing happens.
when i plug in usb cable nothing happens.
its totally dead.
anyone idea what i can do?
or shall i send it to samsung?
thanks

lol4it said:
hi guys,
my phone doen't work anymore..
when i press the power button nothing happens.
when i try to get into odin mode nothing happens.
when i plug in usb cable nothing happens.
its totally dead.
anyone idea what i can do?
or shall i send it to samsung?
thanks
Click to expand...
Click to collapse
What exactly did you do to arrive at that point?
Sent from my GT-N7000 using Tapatalk 2

tried to flash using odin 1.85

ehmmm maybe try to charge battery. And sometimes phone works but screen isnt, try to go in download mode and to check is it connecting to odin even if screen is black ;D gl

batterie is charged.
already tried everything i know

i dont think so that after flashing with 1.85 odin you would get hard brick, i think that you messed up with files in not right sections and baam- brick :/

yes youre right
i just plugged into my pc and windows is searching for samsung mobile usb composite device drivers..
and now finaly odin found it too
i think i just paniced too hard...
where can i get a original firmware?

lol4it said:
yes youre right
i just plugged into my pc and windows is searching for samsung mobile usb composite device drivers..
and now finaly odin found it too
i think i just paniced too hard...
where can i get a original firmware?
Click to expand...
Click to collapse
www.sammobile.com all official firmwares ;D

ok gonna try:
GT-N7000 N7000XXLPY 4.0.3 2012 May N7000OXALPY Open Germany Download Unlock
(got vodafone germany)

<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)

lol4it said:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
you extracted zip file? you need to put .tar file at PDA ^^

ok
now my pc find my phone as unknown device -.-
and odin nothign..

ok worked now:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
but when i press power button still black screen??
EDIT: do i have to change standard settings like re-partition or flash lock?

lol4it said:
ok worked now:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
but when i press power button still black screen??
EDIT: do i have to change standard settings like re-partition or flash lock?
Click to expand...
Click to collapse
i didnt change settings like re-partition and etc. You fcked up something, a lot of people flashed without problems

yes i know =(
but i dont think my screen is broken..

wtf is this?? someone must help me
i got sound and everthing but dat screen is BLACK

Sorry mate phone had dont suppose u would sell as need screen for mine as drop it
Sent from my GT-N7000 using xda premium

Tried to flash aokp jb 4.1.2 milestone1 rom on my galaxy note ics 4.0.4.Launched cwm recovery mode and wiped data,which went off fine but when I flashed the aokp milestone 1 rom the whole thing stuck for few minutes and suddenly the screen went blank.I waited long hoping it would restart... but it didnt.Opened the battery,reinstall it and tried to switch on but failed..I also tried to launch the Cwm recovery ,also tried the download mode but the phone refused to start.... please help....

dead battery?

nokiamodeln91 said:
dead battery?
Click to expand...
Click to collapse
No... I charged the phone before proceeding....it was around 90-95% when I started....!!!

[Q] [help] shw-m110s stuck on this screen

help please i got this unit stuck on upgrade screen
history:
the unit had too many pattern attempts then i tried hard resetting it by using the combination keys, but then after accessing the menu for hard resetting, when i press vol - to choose the reformat or factory reset (somthing like that i forgot) then it displayed forced uplaod mode by pressing keys. then i removed the battery and turned it on with just the power button, but it entered the hard reset menu again. i thought the volume keys were shorted so i removed them, but even if i have removed all the keys still stuck on the hard reset screen. then i tried connecting it to kies and one time it was detected, but it turned off then i showed that screen. it can be detected by my computer but not by kies or odin or any other flashers i have here.

up for this post can anybody help me pls?

Stuck on Upgrade Logo
chunkiebone said:
up for this post can anybody help me pls?
Click to expand...
Click to collapse
Mine got this problem too, any help guys?? thanks in advance

asukaragnaboy said:
Mine got this problem too, any help guys?? thanks in advance
Click to expand...
Click to collapse
if you are getting an "UPGRADE" screen, it means you have failed/unsusessfull flash and you are still in download mode, so just connect to fresh/reboot Odin and flash again recovery or flash WF07 ROM to recover

xsenman said:
if you are getting an "UPGRADE" screen, it means you have failed/unsusessfull flash and you are still in download mode, so just connect to fresh/reboot Odin and flash again recovery or flash WF07 ROM to recover
Click to expand...
Click to collapse
nope. my phone fully flashes whenever i flash it. odin always says completed. problem is that when the phone restarts, it's working ok until i remove it from cable. when i unplug it to cable, after a few minutes it turns off and goes to the never ending loop again (samsung logo, the first one with circle) or if i unplug it and charge it on a wall charger it turns off and guess what, it returns to the same loop again.
EDIT:
odin logs for reference
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELL4_I9300H3GELL1_I9300NELK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> system.img
<ID:0/006> NAND Write Start!!
<ID:0/006> boot.img
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> recovery.img
<ID:0/006> modem.bin
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Removed!!
<ID:0/007> Added!!

[q] gt-n7000 need help!!!!

Hay guys.Sorry to open new thread,but I really need help.I got galaxy note (N7000) and the problem is that is stuck ob samsung boot logo.I have tried every single solution I could find on the web,but with no luck.I dont even know on what rom is ATM because i got it in this condition.All I know is that it was bought in Austria
PLEASE HELP!!!!

Have you tried booting it into recovery mode or download mode?
Recovery: Press Home + Volume Up + Power On. Stay pressed until GT-N7000 logo comes up.
Download: Press Home + Volume Down + Power On. Stay pressed until GT-N7000 logo comes up.

Nibb31 said:
Have you tried booting it into recovery mode or download mode?
Recovery: Press Home + Volume Up + Power On. Stay pressed until GT-N7000 logo comes up.
Download: Press Home + Volume Down + Power On. Stay pressed until GT-N7000 logo comes up.
Click to expand...
Click to collapse
i can only get it in download mode.when i try to start recovery mode the phone stops at samsung logo and just hangs there all day

Go to the download mode, flash a stock ROM for your region using PC ODIN and go thru dr.ketan's thread in the original Android development forum. Flash a stock ROM and then flash a kernel like the PhilZ kernel that you'll find in the thread on how to root and this boot loop bug will be out forever.

thanks for your effort Varad,but still not luck.I guess I got a pretty expensive paper weight :crying:

bizzare187 said:
thanks for your effort Varad,but still not luck.I guess I got a pretty expensive paper weight :crying:
Click to expand...
Click to collapse
post the result or screenshot of pc odin or just mention where is it getting stuck while flashing.

flashing goes without problem,but when the phone reboots it stucks on samsung logo

bizzare187 said:
flashing goes without problem,but when the phone reboots it stucks on samsung logo
Click to expand...
Click to collapse
do you get message on pc oding saying success1/failed0?

yes i get that message and then phone reboots.and it stucks

bizzare187 said:
yes i get that message and then phone reboots.and it stucks
Click to expand...
Click to collapse
have you tried flashing again?

treacherous_hawk said:
have you tried flashing again?
Click to expand...
Click to collapse
yes i did.i will do it again now and post odin messages
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000OXXLP7_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> cache.img
<ID:0/008> NAND Write Start!!
<ID:0/008> hidden.img
<ID:0/008> factoryfs.img
<ID:0/008> zImage
<ID:0/008> modem.bin
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!

And yet it is stuck on the boot logo? Well that thing about the paperweight seems to be right now

Varad297 said:
And yet it is stuck on the boot logo? Well that thing about the paperweight seems to be right now
Click to expand...
Click to collapse
friend told me to try a full wipe rom.is it a good idea?if it is,i just wanna know if it is flashable via odin.

Look haven't you wiped data before flashing ROMs? And yes any full wipe ROM with a .tar file is flashable via odin. But a full wipe ROM is of no use if you wipe data and cache before a flash, it's the same.

Varad297 said:
Look haven't you wiped data before flashing ROMs? And yes any full wipe ROM with a .tar file is flashable via odin. But a full wipe ROM is of no use if you wipe data and cache before a flash, it's the same.
Click to expand...
Click to collapse
no i havent wiped anything.i got the phone in this condition.i can only enter download mode.when i try to enter recovery mode the phone stucks at logo.same thing if i just try to turn it on.

Yes try a full wipe ROM then, no harm in trying...

tried the wipe ROM.still no luck
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXKL8_CL840182_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXKL8_REV_05_CL1089796.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXAKL8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> Sbl.bin
<ID:0/008> param.lfs
<ID:0/008> zImage
<ID:0/008> factoryfs.img
<ID:0/008> data.img
<ID:0/008> cache.img
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008> Receive Response form LOKE
<ID:0/008> cache.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!

still under warranty?

Get to the service center...that's the only way i see out of this...

treacherous_hawk said:
still under warranty?
Click to expand...
Click to collapse
no,warranty is expired
Varad297 said:
Get to the service center...that's the only way i see out of this...
Click to expand...
Click to collapse
thanks a lot everybody for trying

[Q] Galaxy S Advance not starting anymore

Hello,
Just flashed my GT-I9070 according to the how-to of qzem with the recommended settings.
This worked out once, then I was trying another firmware, this didn't work out (phone was hanging at the Samsung GT-I9070 start-screen), so I thought: "OK, lets do the other firmware again".
So entered the download mode and tried to flash the "old" firmware again (XXLD1.tar) but it just does something very fast (not really installing) and reboots again with hanging at the start screen.
OK, so lets got to the "recovery-mode"... not possible!
Did this now a few times, but everytime the same result, just a quick full download bar and restarting with hanging.
Did I kill my phone? :crying:
ODIN look also fine...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> xxld1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> kernel.bin.md5
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
PLEASE HELP ME!!!
Thanks so much
Thomas
UPDATE:
After installing a stock ROM everything worked fine again, also recovery mode.
BUT on installing the rrotkernel.tar of qzem it again hangs at the start-screen.
So problem is reduced on that step.
So how to unlock my phone without that rootkernel???

I was also struggling with qzem's method, didn't brick it but I couldn't root it. Would be nice if someone could clarify this, I'm curious.
So I ended up with a pre-rooted firmware from diego's thread. Many links are down but since you're voiding your warranty
by rooting then what's the point in having a firmware for your country? Just keep in mind that pre-rooted should match the base one, if you're gonna do this.

tommym74 said:
Hello,
Just flashed my GT-I9070 according to the how-to of qzem with the recommended settings.
This worked out once, then I was trying another firmware, this didn't work out (phone was hanging at the Samsung GT-I9070 start-screen), so I thought: "OK, lets do the other firmware again".
So entered the download mode and tried to flash the "old" firmware again (XXLD1.tar) but it just does something very fast (not really installing) and reboots again with hanging at the start screen.
OK, so lets got to the "recovery-mode"... not possible!
Did this now a few times, but everytime the same result, just a quick full download bar and restarting with hanging.
Did I kill my phone? :crying:
ODIN look also fine...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> xxld1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> kernel.bin.md5
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
PLEASE HELP ME!!!
Thanks so much
Thomas
UPDATE:
After installing a stock ROM everything worked fine again, also recovery mode.
BUT on installing the rrotkernel.tar of qzem it again hangs at the start-screen.
So problem is reduced on that step.
So how to unlock my phone without that rootkernel???
Click to expand...
Click to collapse
Try flashing JB Roms , rooting JB is easy , download root.zip by Shaan and just flash it through recovery and u ve a rooted phone now..
Link is http://forum.xda-developers.com/showthread.php?t=2087424