Database Develop

Freeze on start up screen

I've tried to root the machine using Abyss Note and the process sems to be working fine but once the phone reboot, it just freeze on the screen with "samsung Note N7000" and there is yellow triangle at the bottom?
Please anyone can help to bring the phone back to normal
Thanks in advance

error log when tried to flash other ROM:
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000ZSKK1_CL706440_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXKJ6_REV_05_CL1070146.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OZSKK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Has anyone got any suggestion?
Thanks

Wipe cache N Wipe data fro recovery
Your error log seems having connection issue
Reinstall driver N Try again
Y you get yellow triangle? Have you installed abyss kernel with PC Odin?

Thank you for the advice.
I have change to another USB port and it is working fine.
I am currently using LA2 HK version. Can you please show me some guideline how to do that on LA2?
Thanks

eatout said:
Can you please show me some guideline how to do that on LA2?
Thanks
Click to expand...
Click to collapse
What? You mean yellow triangle removal??

Error while updating firmware

Hello,
While using Sygic navigation dad's galaxy ace (S5830i) got frozen, I restarted it by pushing the power button for a few seconds, but the phone didn't start up, just showing the samsung logo animation again and again... i tried to use recovery mode but it says it "failed to mount /data (invailed agrument).
So I thought i reinstall the original software, that I found on sammobile.com, but while I was installing it, some kind of error happened:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLA4_S5830iOXXLA2_RST_S5830iXXLA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The phone is rooted, all drivers are installed on my pc.
I used more than one versions of Odin, including the version offered by sammobile.com (this is what you can seen on the screenshot)
Im so faithless about the phone now... :crying:
ps: i wasnt able to insert a link because its my first post, so see the screenshot attached.

Hi
valaky said:
Hello,
While using Sygic navigation dad's galaxy ace (S5830i) got frozen, I restarted it by pushing the power button for a few seconds, but the phone didn't start up, just showing the samsung logo animation again and again... i tried to use recovery mode but it says it "failed to mount /data (invailed agrument).
So I thought i reinstall the original software, that I found on sammobile.com, but while I was installing it, some kind of error happened:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLA4_S5830iOXXLA2_RST_S5830iXXLA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The phone is rooted, all drivers are installed on my pc.
I used more than one versions of Odin, including the version offered by sammobile.com (this is what you can seen on the screenshot)
Im so faithless about the phone now... :crying:
ps: i wasnt able to insert a link because its my first post, so see the screenshot attached.
Click to expand...
Click to collapse
Hi there. How's the problem? I also got the same problem, flashing a firmware from sammobile and failing to flash it even if I use the .pit file i found on other threads. But you still have a chance. Download the Pda.tarhere and place it in the PDa section. do not use any pit file. it worked for me, I soft bricked my s5830i several times already and the PDA.tar works like a charm. I got it from here thanks to ickyyy

valaky said:
Hello,
While using Sygic navigation dad's galaxy ace (S5830i) got frozen, I restarted it by pushing the power button for a few seconds, but the phone didn't start up, just showing the samsung logo animation again and again... i tried to use recovery mode but it says it "failed to mount /data (invailed agrument).
So I thought i reinstall the original software, that I found on sammobile.com, but while I was installing it, some kind of error happened:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLA4_S5830iOXXLA2_RST_S5830iXXLA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The phone is rooted, all drivers are installed on my pc.
I used more than one versions of Odin, including the version offered by sammobile.com (this is what you can seen on the screenshot)
Im so faithless about the phone now... :crying:
ps: i wasnt able to insert a link because its my first post, so see the screenshot attached.
Click to expand...
Click to collapse
S5830i only accepts a three file odin installation method. The .PDA file mentioned in the second post is also valid, but its an older firmware for s5830i. Please checkout this thread http://forum.xda-developers.com/showthread.php?t=1822109 to install latest firmware downloaded and made compatible for odin. Details are in the thread. I hope this helps and if it does don't forget the thank button

Odin help please!!!!

Hi
Can somebody help me with this problem
Firstly during an official update from 2.3.6 to 4.0.4 using KIES bombed out at 4% so soft bricked is what we call it!!!
Can only boot into download mode so using odin to wack on
"N7000XXLRG_N7000DBTLRG_DBT\N7000XXLRG_N7000DBTLRG_N7000XXLRB_HOME.tar.md5"
Following message appears in Odin
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRG_N7000DBTLRG_N7000XXLRB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> factoryfs.img
<ID:0/006> NAND Write Start!!
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006>
<ID:0/006> Receive Response form LOKE
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there anyway I can force write to it?
Could it be the firmware that is the issue or would I get this on everything I try?
Please help
Thanks

EFCLEE said:
Hi
Can somebody help me with this problem
Firstly during an official update from 2.3.6 to 4.0.4 using KIES bombed out at 4% so soft bricked is what we call it!!!
Can only boot into download mode so using odin to wack on
"N7000XXLRG_N7000DBTLRG_DBT\N7000XXLRG_N7000DBTLRG_N7000XXLRB_HOME.tar.md5"
Following message appears in Odin
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006>
<ID:0/006> Receive Response form LOKE
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there anyway I can force write to it?
Could it be the firmware that is the issue or would I get this on everything I try?
Please help
Thanks
Click to expand...
Click to collapse
Did you select the firmware .tar file in odin PDA tab only?
This sometimes happens due to bad download file, try flashing some other firmware, preferably GB so that you can wipe if required.
search google with 'Receive Response form LOKE" and you will find lot of people having same issue and most of them able to resolve by flashing different firmware.

jeetu1981 said:
Did you selected the firmware .tar file in odin PDA tab only?
This sometimes happens due to bad download file, try flashing some other firmware, preferably GB so that you can wipe if required.
search google with 'Receive Response form LOKE" and you will find lot of people having same issue and most of them able to resolve by flashing different firmware.
Click to expand...
Click to collapse
No I have been adding it to PHONE, is this wrong?
Anyways I just tried it again adding to PDA and this time it gets stuck on
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRI_N7000OXXLP8_N7000XXLRB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
Any ideas?

EFCLEE said:
No I have been adding it to PHONE, is this wrong?
Anyways I just tried it again adding to PDA and this time it gets stuck on
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRI_N7000OXXLP8_N7000XXLRB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
Any ideas?
Click to expand...
Click to collapse
Yes, its completely wrong, you should select single firmware .tar in PDA tab only. Try again by rebooting your phone and check if you have kies running, if so close it completely.
SUGGESTION- Do not flash ICS stock rom now, I am not sure what has been messed up by flashing this using phone tab (ICS phone files on GB base, not sure), best is flash stock GB firmware first, then wipe in stock recovery and flash ICS.

jeetu1981 said:
Yes, its completely wrong, you should select single firmware .tar in PDA tab only. Try again by rebooting your phone and check if you have kies running, if so close it completely.
SUGGESTION- Do not flash ICS stock rom now, I am not sure what has been messed up by flashing this using phone tab (ICS phone files on GB base, not sure), best is flash stock GB firmware first, then wipe in stock recovery and flash ICS.
Click to expand...
Click to collapse
WOW!!! Restarted phone wacked it into PDA and BAM!! started to copy over!!!
A million thank you's Jeetu1981 your a fkin diamond!!!!!

EFCLEE said:
WOW!!! Restarted phone wacked it into PDA and BAM!! started to copy over!!!
A million thank you's Jeetu1981 your a fkin diamond!!!!!
Click to expand...
Click to collapse
Cool... Consider urself lucky this time
And click on thanks is better than million thanks, lol
Sent from my GT-N7000

[Fixed] First time rooting, accidentally flashed wrong ROM what to do from this point

EDIT: Rebooted my computer and phone and it flashed fine. Thank you for all the help. I'm off to explore the world of custom roms.
Finally decided to root my phone and install CM9 from GB 2.3.6 with the LA4 Kernel. Downloaded everything I needed as per Post 3 of this thread. Accidentally flashed the newer kernel instead of the pre rooted ROM.
Realizing my mistake, I tried flashing the correct ROM and PC Odin gives me a failure. The phone won't boot, it just stays stuck on the Galaxy Note N7000 Logo with an exclamation mark at the bottom.

Check if you have cwm (power+home +volume up) If so then flash this get the standard version, then go advanced options and reboot recovery...
After that do all wipes data/cache/Dalvik cache then flash the cm9 for n7000,then flash cm9 GApps then reboot...
After the system boots to android set it up and download triangle away and use it to get rid of the yellow triangle
If you don't have cwm then download a stock GB rom and flash it via odin... Start from scratch
Cheers
Tapatalking on my GT-N7000

what is the error pc odin giving you?

Don't quite remember anymore since it was from this morning. All I recall is the little box on the top left going red.
Could I try replicating the problem or do I risk damaging my phone?

odin won't damage the phone. As above poster said check if you have cwm, else use Odin again

nokiamodeln91 said:
odin won't damage the phone. As above poster said check if you have cwm, else use Odin again
Click to expand...
Click to collapse
No, I don't have CWM so I've been downloading a stock rom since I saw that post should take an hour with glorious third world internet. In the meantime should I fish out that error message you requested or is it not worth it at this point?

If you need all data back and everything to be working I would recommend you to flash back the same ROM you had earlier using odin.
Go back to Square 1.
Then root it from Dr Ketan's post.

as you downloading the rom. you are going to use Odin again. Let know the error

Yeap, another fail while using PCOdin.
Going to install samsung USB drivers from the file in this thread and get rid of Kies.
Here's the stuff from the little window.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA4_N7000OXALA4_N7000XXLA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> factoryfs.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/007> Added!!
Edit: Tried again after reinstalling drivers. Still no go.
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA4_N7000OXALA4_N7000XXLA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

great

[Q] Stuck trying to recover to factory rom

Hi,
I recently bought my Galaxy s4 Active i9295.
After I had updated the phone with the newest software from android/google,I tried to install a custom rom.
I was'nt happy with it and wanted to get back to factory.
Unfortuneatly I can't manage to do it.
I went into CWM and cleared everthing, cache etc..I'm not sure what i pressed to be honest.
Now I'm panicing a little, afraid of my phone getting bricked.
When I boot my phone now it's stuck at the Samsun Galaxy screen with a red text im the top left corner which says
"KERNEL IS NOT SEANDROID ENFORING"
I can still go into recovery mode and download mode.
After this I have tried to install this file via ODIN (v3.07). It gives me this:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9295XXUBMK3_I9295TENBMK1_I9295XXUBMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I'm stuck now. With no idea what to do. I have done a custom rom on my s2 before and nothing went wrong when i tried to get it back to factory.
I have tried to read other threads but got nothing from them. There might be some I have'nt watched yet.
Is there anyone that has knowlede of what to do?
I appreciate any replys.
PS:
I'm not very experienced so please tell me if something seems weird in my explenation
And English is not my 1.st language.