[Q] Stuck trying to recover to factory rom - Galaxy S 4 Active Q&A, Help & Troubleshooting

Hi,
I recently bought my Galaxy s4 Active i9295.
After I had updated the phone with the newest software from android/google,I tried to install a custom rom.
I was'nt happy with it and wanted to get back to factory.
Unfortuneatly I can't manage to do it.
I went into CWM and cleared everthing, cache etc..I'm not sure what i pressed to be honest.
Now I'm panicing a little, afraid of my phone getting bricked.
When I boot my phone now it's stuck at the Samsun Galaxy screen with a red text im the top left corner which says
"KERNEL IS NOT SEANDROID ENFORING"
I can still go into recovery mode and download mode.
After this I have tried to install this file via ODIN (v3.07). It gives me this:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9295XXUBMK3_I9295TENBMK1_I9295XXUBMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I'm stuck now. With no idea what to do. I have done a custom rom on my s2 before and nothing went wrong when i tried to get it back to factory.
I have tried to read other threads but got nothing from them. There might be some I have'nt watched yet.
Is there anyone that has knowlede of what to do?
I appreciate any replys.
PS:
I'm not very experienced so please tell me if something seems weird in my explenation
And English is not my 1.st language.

Related

[Q] At&t S5 going back to stock help

Hey all,
I am trying to go back to stock. I am using Odin 3.09, and I have the correct file. (G900AU1ANCE) I am running Odin under administrator mode. Every time I run it, I get this same message. You all know much more than I when it comes to this stuff, so hopefully you guys can help me out. Verizon has a sale going on and I wanna get the LG G3, and they'll give me $$$ for the S5. But it has to be stock, or they won't take it.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
the rom that is in there now is Visix 3.0.
what is my next move?
thanks in advance.
ok - I went to this: http://forum.xda-developers.com/showthread.php?t=2785185 - and tried what shortydoggg said. I tried loading the BL file too, but it failed right away. Same error as before. Now, I'm trying it without that file, and use the other 3 files. Its seems to be working and not giving any error's. I'll update this to see if it works or not.
Update:
It worked. Everything is back to normal!
hammer826 said:
Hey all,
I am trying to go back to stock. I am using Odin 3.09, and I have the correct file. (G900AU1ANCE) I am running Odin under administrator mode. Every time I run it, I get this same message. You all know much more than I when it comes to this stuff, so hopefully you guys can help me out. Verizon has a sale going on and I wanna get the LG G3, and they'll give me $$$ for the S5. But it has to be stock, or they won't take it.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
the rom that is in there now is Visix 3.0.
what is my next move?
thanks in advance.
ok - I went to this: http://forum.xda-developers.com/showthread.php?t=2785185 - and tried what shortydoggg said. I tried loading the BL file too, but it failed right away. Same error as before. Now, I'm trying it without that file, and use the other 3 files. Its seems to be working and not giving any error's. I'll update this to see if it works or not.
Update:
It worked. Everything is back to normal!
Click to expand...
Click to collapse
Where did you find the Odin file? Will be needing it for lollipop when it release Lol. Well not too sure if the phone will update while rooted
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app

[Q] Please HELP!! SGS3 mini GT-I8190 bootloop after firmware flash!

Hello guys
after odin complete it's process (
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8190XXAMG4_I8190OJVAMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> STE_boot1.img
<ID:0/005> STE_boot2.img
<ID:0/005> modem.bin
<ID:0/005> system.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
the device restart and boot into android man and a blue bar under him but does not complete to the end of screen and the device enter into bootloop.
Any help please
option I have tried and didn't work:
Flashed Param.tar after stock firmware flash.
Flashed kernel i8190xxamg4.tar then stock firmware
flashed custom rom "Novafusion 12/4/2016 version".
flashed wipe.tar before stock firmware flash.
the main problem happend when I tried to install recovery through "SkipSoft ToolKit" and didn't work, So I flashed the stock firmware and stuck in bootloop.
I don't know what is the responsible part of firmware that is causing the problem.
did I mention that touch buttons blink three times after the first samsung logo "what does that mean? :/ "
this is the 1st time happening with me and I don't know how a stock firmware does not boot!!
guys ..
Is there anyone understand what's happening here??
Im losing my mind here, ive tried almost everything i can think of. And would really appreciate any help on this
..

Need help to Unbrick my Tab S2 T710

After a failed root attempt, the screen would randomly go black and unresponsive. So, i decided to flash CM12 using TWRP. However, I accidently wiped the entire storage without backups and now it's stuck on bootup (Samsung Tab S2 powered by Android) and refuse to shutdown nor go to recovery. I tried using Odin to flash a stock ROM -T710XAR1BOH7- but Odin failed and the tablet shows -SW REV. CHECK FAIL. DEVICE: 2, Binary 1-
I got this from Odin.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T710XXU1BOH7_T710XAR1BOH7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
I ran into the same issue about a month ago, but I was able to restore using Samsung Smart Switch's restore function. Just download and run it with your tablet in download mode.
Xiang0428 said:
After a failed root attempt, the screen would randomly go black and unresponsive. So, i decided to flash CM12 using TWRP. However, I accidently wiped the entire storage without backups and now it's stuck on bootup (Samsung Tab S2 powered by Android) and refuse to shutdown nor go to recovery. I tried using Odin to flash a stock ROM -T710XAR1BOH7- but Odin failed and the tablet shows -SW REV. CHECK FAIL. DEVICE: 2, Binary 1-
I got this from Odin.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T710XXU1BOH7_T710XAR1BOH7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
Click to expand...
Click to collapse
You're trying to flash a revision 1 firmware on a revision 2 device.
ashyx said:
You're trying to flash a revision 1 firmware on a revision 2 device.
Click to expand...
Click to collapse
I flashed the newest build and that did the trick. (BPB1) Thanks.

Help unable to restore note 5 stock firmware.

Im trying to install stock firmware on my note 5 and it keeps failing. Yes i do have the correct firware for my model and carrier. Hope some1 can help me out
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1205)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
jdq1412 said:
Im trying to install stock firmware on my note 5 and it keeps failing. Yes i do have the correct firware for my model and carrier. Hope some1 can help me out
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1205)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Who is your carrier and which firmware are you trying to use? Are you trying to downgrade/Update or something? Has the phone ever been rooted? Did you enable oem unlock in developer settings? It's kind of hard to just guess or help you with the information you've given us.
T-mobile and im trying to use stock note 5 firmware. Yes i was rooted and with a custom rom. Im trying to unroot the phone and put it back to stock but now it wont get past samsung note 5 logo and im still getting the fail from odin when trying to install the firmware.
jdq1412 said:
T-mobile and im trying to use stock note 5 firmware. Yes i was rooted and with a custom rom. Im trying to unroot the phone and put it back to stock but now it wont get past samsung note 5 logo and im still getting the fail from odin when trying to install the firmware.
Click to expand...
Click to collapse
That's because you rooted the phone and it tripped your Knox counter so the only way to fix this is to reinstall TWRP and then flash the rom again and after it's working go into SU and select remove root or whatever and then you'll need to extract the firmware you downloaded from T-Mobile and you'll need to put the files in the correct spot in Odin so they flash one at a time I.E. Boot, CM, RECOVERY etc etc... You should also try unzipping the firmware and then delete only cache.img and then repack/rezip it and try flashing it like that before trying all the other stuff.

Attempting to flash stock firmware to unroot my Note 5 SM-N920T

I have a Note 5 SM-N920T and I had it rooted with Magisk. It was working great until I needed to remove the root. I tried to flash a stock firmware I found online and it failed giving me the error "sw rev. check fail. device 4 binary 2". I then forced my phone to reboot (power + vol down) and got back in download mode. I downloaded a newer version of the Note 5 firmware from Updato and flashed it. This time it passed in Odin but would never boot into android, instead, it would get stuck on the T-Mobile splash screen. Another weird thing I noticed is that the blue led will not shut off no matter what. Even when the phone is completely off and unplugged the led remains on. I need to get back to the original ROM/firmware but I can't do it. All help would be greatly appreciated as I have been unable to find anything so far after countless hours of scouring the internet. Until this issue is resolved I am without a phone so as mentioned above any and all help is greatly appreciated.
Odin Log when the error occurs:
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!

Categories

Resources