Attempting to flash stock firmware to unroot my Note 5 SM-N920T - Galaxy Note5 Q&A, Help & Troubleshooting

I have a Note 5 SM-N920T and I had it rooted with Magisk. It was working great until I needed to remove the root. I tried to flash a stock firmware I found online and it failed giving me the error "sw rev. check fail. device 4 binary 2". I then forced my phone to reboot (power + vol down) and got back in download mode. I downloaded a newer version of the Note 5 firmware from Updato and flashed it. This time it passed in Odin but would never boot into android, instead, it would get stuck on the T-Mobile splash screen. Another weird thing I noticed is that the blue led will not shut off no matter what. Even when the phone is completely off and unplugged the led remains on. I need to get back to the original ROM/firmware but I can't do it. All help would be greatly appreciated as I have been unable to find anything so far after countless hours of scouring the internet. Until this issue is resolved I am without a phone so as mentioned above any and all help is greatly appreciated.
Odin Log when the error occurs:
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!

Related

[Q] Stuck trying to recover to factory rom

Hi,
I recently bought my Galaxy s4 Active i9295.
After I had updated the phone with the newest software from android/google,I tried to install a custom rom.
I was'nt happy with it and wanted to get back to factory.
Unfortuneatly I can't manage to do it.
I went into CWM and cleared everthing, cache etc..I'm not sure what i pressed to be honest.
Now I'm panicing a little, afraid of my phone getting bricked.
When I boot my phone now it's stuck at the Samsun Galaxy screen with a red text im the top left corner which says
"KERNEL IS NOT SEANDROID ENFORING"
I can still go into recovery mode and download mode.
After this I have tried to install this file via ODIN (v3.07). It gives me this:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9295XXUBMK3_I9295TENBMK1_I9295XXUBMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I'm stuck now. With no idea what to do. I have done a custom rom on my s2 before and nothing went wrong when i tried to get it back to factory.
I have tried to read other threads but got nothing from them. There might be some I have'nt watched yet.
Is there anyone that has knowlede of what to do?
I appreciate any replys.
PS:
I'm not very experienced so please tell me if something seems weird in my explenation
And English is not my 1.st language.

Help can't flash anything to TMobile Note 5

I'm trying to go back to stock and i've tried every which way. When I try to do it through Odin it fails. I've tried on every USB port I have.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I tried through Smart Switch and it says its a Galaxy Edge 7 so it doesn't let me do the emergency restore.
Then I tried to flash any other room though TWRP and it just says failed and give Error 7.
Any help will be appreciated.
You need to download the correct firmware for your device

odin fail! when flashing stock rom. n920i

im running infinity note 7 port p8, and now i want to flash stock rom but im getting this: im flashing this N920IDVU3CQD3_N920IOLC3CQD3_N920IDVU3CQD2_HOME.tar
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
it was stuck then i reboot it, got an error saying:
an error has occurred while updating the device software. Use the Emergency recovery function in the smart switch pc software. i used that function but nothing happened, now it just stuck at this place.
Just turn it off and retry.
tried that already many times.
chailee said:
tried that already many times.
Click to expand...
Click to collapse
you are not trying hard enough. hurry up before the battery drains out or you are gonna have a really bad time
press power, vol - and home for 9 seconds. Nine. At the 10th second the phone WILL reboot, now you must enter recovery (power, vol + and home) to keep it off and after that you may try to get into download mode.
once the phone reboot, it would bring me back to the error page and wont let me get in to download mode.
Flash with repartition ticked and add pit file for firmware you are trying to flash
Where does the pit file go?
you have pit tab in odin, next to log and options
where can i find nougat pit file? only seen 5.1.1
is same pit for all android versions, make sure is for your csc
thank you guys for helping me out and replying back fast. i fixed the problem.

Note 5 (SM-N920C) Odin failed !!

Hi there.
My galaxy note 5 (unlocked) was working very well until yesterday
Some apps start crashing and start to slow down
And after it suddenly restarted and stuck in a restart boot
I tried a lot of ways to fix it began of:
- Boot it in safe mode (the apps still crashing)
- Wipe the cache partition
- Wide data factory
- And after that i treid to install stock firmware with odin i followed all the instruction. But Odin still showing FAILED
and this message :
-----------------------------------------------------------
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
---------------------------------------------------------------------
I activated the USB debugging and OEM unlocking btw.
Your help will be highly a appreciated
And thanks

Rooting galexy S5 AT&T

is [this](https://forum.xda-developers.com/t/guide-root-roms-and-other-cool-stuff.3516196/) the most current method.
And I realize current is going to be old, as its an old device.
I have a G900A, I got an unlock code from AT&T and entered it. I don't have an active sim in the device (wifi only), and I'm trying to root, both kingroot/towelroot say something about make sure you have internet. Internet works fine I googled random things to verify.
Trying the guide above I can't get passed the first step of flashing the tar.md5 with the error below, anyone have any advice or guidance?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbll.mbn
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
For anyone that finds themselves here, I solved my issue, by booting to recovery mode (vol up + home + power), then selecting to go to bootloader, it was the same screen as vol down, but it worked from that screen .

Categories

Resources