I've tried to root the machine using Abyss Note and the process sems to be working fine but once the phone reboot, it just freeze on the screen with "samsung Note N7000" and there is yellow triangle at the bottom?
Please anyone can help to bring the phone back to normal
Thanks in advance
error log when tried to flash other ROM:
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000ZSKK1_CL706440_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXKJ6_REV_05_CL1070146.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OZSKK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Has anyone got any suggestion?
Thanks
Wipe cache N Wipe data fro recovery
Your error log seems having connection issue
Reinstall driver N Try again
Y you get yellow triangle? Have you installed abyss kernel with PC Odin?
Thank you for the advice.
I have change to another USB port and it is working fine.
I am currently using LA2 HK version. Can you please show me some guideline how to do that on LA2?
Thanks
eatout said:
Can you please show me some guideline how to do that on LA2?
Thanks
Click to expand...
Click to collapse
What? You mean yellow triangle removal??
Related
Hello,
While using Sygic navigation dad's galaxy ace (S5830i) got frozen, I restarted it by pushing the power button for a few seconds, but the phone didn't start up, just showing the samsung logo animation again and again... i tried to use recovery mode but it says it "failed to mount /data (invailed agrument).
So I thought i reinstall the original software, that I found on sammobile.com, but while I was installing it, some kind of error happened:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLA4_S5830iOXXLA2_RST_S5830iXXLA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The phone is rooted, all drivers are installed on my pc.
I used more than one versions of Odin, including the version offered by sammobile.com (this is what you can seen on the screenshot)
Im so faithless about the phone now... :crying:
ps: i wasnt able to insert a link because its my first post, so see the screenshot attached.
Hi
valaky said:
Hello,
While using Sygic navigation dad's galaxy ace (S5830i) got frozen, I restarted it by pushing the power button for a few seconds, but the phone didn't start up, just showing the samsung logo animation again and again... i tried to use recovery mode but it says it "failed to mount /data (invailed agrument).
So I thought i reinstall the original software, that I found on sammobile.com, but while I was installing it, some kind of error happened:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLA4_S5830iOXXLA2_RST_S5830iXXLA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The phone is rooted, all drivers are installed on my pc.
I used more than one versions of Odin, including the version offered by sammobile.com (this is what you can seen on the screenshot)
Im so faithless about the phone now... :crying:
ps: i wasnt able to insert a link because its my first post, so see the screenshot attached.
Click to expand...
Click to collapse
Hi there. How's the problem? I also got the same problem, flashing a firmware from sammobile and failing to flash it even if I use the .pit file i found on other threads. But you still have a chance. Download the Pda.tarhere and place it in the PDa section. do not use any pit file. it worked for me, I soft bricked my s5830i several times already and the PDA.tar works like a charm. I got it from here thanks to ickyyy
valaky said:
Hello,
While using Sygic navigation dad's galaxy ace (S5830i) got frozen, I restarted it by pushing the power button for a few seconds, but the phone didn't start up, just showing the samsung logo animation again and again... i tried to use recovery mode but it says it "failed to mount /data (invailed agrument).
So I thought i reinstall the original software, that I found on sammobile.com, but while I was installing it, some kind of error happened:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLA4_S5830iOXXLA2_RST_S5830iXXLA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The phone is rooted, all drivers are installed on my pc.
I used more than one versions of Odin, including the version offered by sammobile.com (this is what you can seen on the screenshot)
Im so faithless about the phone now... :crying:
ps: i wasnt able to insert a link because its my first post, so see the screenshot attached.
Click to expand...
Click to collapse
S5830i only accepts a three file odin installation method. The .PDA file mentioned in the second post is also valid, but its an older firmware for s5830i. Please checkout this thread http://forum.xda-developers.com/showthread.php?t=1822109 to install latest firmware downloaded and made compatible for odin. Details are in the thread. I hope this helps and if it does don't forget the thank button
Hello,
Just flashed my GT-I9070 according to the how-to of qzem with the recommended settings.
This worked out once, then I was trying another firmware, this didn't work out (phone was hanging at the Samsung GT-I9070 start-screen), so I thought: "OK, lets do the other firmware again".
So entered the download mode and tried to flash the "old" firmware again (XXLD1.tar) but it just does something very fast (not really installing) and reboots again with hanging at the start screen.
OK, so lets got to the "recovery-mode"... not possible!
Did this now a few times, but everytime the same result, just a quick full download bar and restarting with hanging.
Did I kill my phone? :crying:
ODIN look also fine...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> xxld1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> kernel.bin.md5
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
PLEASE HELP ME!!!
Thanks so much
Thomas
UPDATE:
After installing a stock ROM everything worked fine again, also recovery mode.
BUT on installing the rrotkernel.tar of qzem it again hangs at the start-screen.
So problem is reduced on that step.
So how to unlock my phone without that rootkernel???
I was also struggling with qzem's method, didn't brick it but I couldn't root it. Would be nice if someone could clarify this, I'm curious.
So I ended up with a pre-rooted firmware from diego's thread. Many links are down but since you're voiding your warranty
by rooting then what's the point in having a firmware for your country? Just keep in mind that pre-rooted should match the base one, if you're gonna do this.
tommym74 said:
Hello,
Just flashed my GT-I9070 according to the how-to of qzem with the recommended settings.
This worked out once, then I was trying another firmware, this didn't work out (phone was hanging at the Samsung GT-I9070 start-screen), so I thought: "OK, lets do the other firmware again".
So entered the download mode and tried to flash the "old" firmware again (XXLD1.tar) but it just does something very fast (not really installing) and reboots again with hanging at the start screen.
OK, so lets got to the "recovery-mode"... not possible!
Did this now a few times, but everytime the same result, just a quick full download bar and restarting with hanging.
Did I kill my phone? :crying:
ODIN look also fine...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> xxld1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> kernel.bin.md5
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
PLEASE HELP ME!!!
Thanks so much
Thomas
UPDATE:
After installing a stock ROM everything worked fine again, also recovery mode.
BUT on installing the rrotkernel.tar of qzem it again hangs at the start-screen.
So problem is reduced on that step.
So how to unlock my phone without that rootkernel???
Click to expand...
Click to collapse
Try flashing JB Roms , rooting JB is easy , download root.zip by Shaan and just flash it through recovery and u ve a rooted phone now..
Link is http://forum.xda-developers.com/showthread.php?t=2087424
i have problem.... my gfs samsung s i9070 somehow bricked and wont pass through the bootscreen. wont let me enter recovery,,but it goes to download mode. i tried to flash it with stock rom but every time i get fail msg and error on mby 20-30% progress... can anyone explain me what am i doing wrong ??
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9070XXLQE_I9070OXXLQE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> kernel.bin.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> modem.bin.md5
<ID:0/003> system.img.md5
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Kenannp said:
i have problem.... my gfs samsung s i9070 somehow bricked and wont pass through the bootscreen. wont let me enter recovery,,but it goes to download mode. i tried to flash it with stock rom but every time i get fail msg and error on mby 20-30% progress... can anyone explain me what am i doing wrong ??
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9070XXLQE_I9070OXXLQE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> kernel.bin.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> modem.bin.md5
<ID:0/003> system.img.md5
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
Try other USB port. Let me known if it works.
Force said:
Try other USB port. Let me known if it works.
Click to expand...
Click to collapse
did try... even tried on other pc but still same problem... went to buddy to repair it in service shop... he said that something is wrong with usb on the phone... so i left it there to get fixed. thx tho
After a failed root attempt, the screen would randomly go black and unresponsive. So, i decided to flash CM12 using TWRP. However, I accidently wiped the entire storage without backups and now it's stuck on bootup (Samsung Tab S2 powered by Android) and refuse to shutdown nor go to recovery. I tried using Odin to flash a stock ROM -T710XAR1BOH7- but Odin failed and the tablet shows -SW REV. CHECK FAIL. DEVICE: 2, Binary 1-
I got this from Odin.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T710XXU1BOH7_T710XAR1BOH7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
I ran into the same issue about a month ago, but I was able to restore using Samsung Smart Switch's restore function. Just download and run it with your tablet in download mode.
Xiang0428 said:
After a failed root attempt, the screen would randomly go black and unresponsive. So, i decided to flash CM12 using TWRP. However, I accidently wiped the entire storage without backups and now it's stuck on bootup (Samsung Tab S2 powered by Android) and refuse to shutdown nor go to recovery. I tried using Odin to flash a stock ROM -T710XAR1BOH7- but Odin failed and the tablet shows -SW REV. CHECK FAIL. DEVICE: 2, Binary 1-
I got this from Odin.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T710XXU1BOH7_T710XAR1BOH7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
Click to expand...
Click to collapse
You're trying to flash a revision 1 firmware on a revision 2 device.
ashyx said:
You're trying to flash a revision 1 firmware on a revision 2 device.
Click to expand...
Click to collapse
I flashed the newest build and that did the trick. (BPB1) Thanks.
I have a note 5 SM-N920C and it's rooted, I'm trying to flash the stock firmware but it won't work for some reason.
For odin version 3.09 I get this, I left it on for a hour but still the same thing.
I used N920CXXU1AOH2_N920COJV1AOH2_N920CXXU1AOH2_HOME.tar.md5 for flashing
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU1AOH2_N920COJV1AOH2_N920CXXU1AOH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
mhm,whats problem do you have exactly?,i cant see nothing in the log.
maybe you need the last odin version 3.11.1
Had the same issue while flashing auto-root via odin.
It just stays stuck at NAND write part.
Familiaaa said:
mhm,whats problem do you have exactly?,i cant see nothing in the log.
maybe you need the last odin version 3.11.1
Click to expand...
Click to collapse
The problem is that I can't install the stock firmware, it doesn't complete the installation for some reason. Also when I am in TWRP, it said that there isn't a OS installed and I have seen that I have to install stock firmware.
I did try odin 3.12.3 and it failed, then I tried odin 3.10.6, it failed but now it also stops at a certain point and won't complete the installation. I could try odin 3.11.1, thanks for response.
I just tried Odin 3.11.1, failed
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After that I tried odin 3.10 and 3.10.5, stuck again but at setupconnection
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU1AOH2_N920COJV1AOH2_N920CXXU1AOH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
I think the problem is my stock firmware, I can't seem to find the stock for a SM-N920CZDAXSG. Help plz
It was the stock firmware, wrong version, I cry today.