Odin failed to flash galaxy mini gt-s5570i giving this error
Odin errors:
Odin3 1.3
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> Leave CS..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin3 1.85
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5570IJPLF1_S5570iOJPLE2_S5570IXXLD6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin Multi Downloader 4.38 (Couldn't even read the phone could somebody give me working driver??)
ROM used:
GT-S5570i Egypt version < because im egyptian
S5570IJPLF1_S5570iOJPLE2_S5570IXXLD6_HOME.tar
Any idea??
Please i have tried many methods to flash it but all in vain :crying::crying:
Thanks
When using Odin to Flash, Open task manager and close these : Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe
try different USB ports on your comp (the ones at the back seem to work best), different USB cables, with the battery in and out, with the SD card removed if you have to. It'll work eventually, It just takes a lot of patience.
mostafaz4 said:
Odin failed to flash galaxy mini gt-s5570i giving this error
Odin errors:
Odin3 1.3
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> Leave CS..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin3 1.85
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5570IJPLF1_S5570iOJPLE2_S5570IXXLD6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin Multi Downloader 4.38 (Couldn't even read the phone could somebody give me working driver??)
ROM used:
GT-S5570i Egypt version < because im egyptian
S5570IJPLF1_S5570iOJPLE2_S5570IXXLD6_HOME.tar
Any idea??
Please i have tried many methods to flash it but all in vain :crying::crying:
Thanks
Click to expand...
Click to collapse
You can install the driver by switching on your phone and press the button to enable file transfer via USB.This usually triggers the computer to download the SamSung driver.
Sent from GALAXY mini...Please Thank Me when you think I deserve it
Ri3v| said:
You can install the driver by switching on your phone and press the button to enable file transfer via USB.This usually triggers the computer to download the SamSung driver.
Sent from GALAXY mini...Please Thank Me when you think I deserve it
Click to expand...
Click to collapse
Hi!.
I have the same problem.
I can not flash my GT-S5570i, allway boot.img fail, bcmcp.img fail... ... ...
I have installed Kies + Odin 1.84 (GT-S5570i edition)
-------------------------
FIXED:
http://forum.xda-developers.com/showthread.php?t=2484904
you must split it into 3 files. pda, modem and csc. just stick to 1.84. search for samsung usb drivers and unistall that kies then install samsung usb drivers.
---------- Post added at 06:50 PM ---------- Previous post was at 06:45 PM ----------
here's the link for Samsung Usb Drivers
here's is the ODINATRIX for splitting that into 3 files (pda, modem (phone), csc)
if you having problem that you can splitFUS tool. it's like odinatrix too
mostafaz4 said:
Odin failed to flash galaxy mini gt-s5570i giving this error
Odin errors:
Odin3 1.3
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> Leave CS..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin3 1.85
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5570IJPLF1_S5570iOJPLE2_S5570IXXLD6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin Multi Downloader 4.38 (Couldn't even read the phone could somebody give me working driver??)
ROM used:
GT-S5570i Egypt version < because im egyptian
S5570IJPLF1_S5570iOJPLE2_S5570IXXLD6_HOME.tar
Any idea??
Please i have tried many methods to flash it but all in vain :crying::crying:
Thanks
Click to expand...
Click to collapse
hay man what did u do about this issue did find a solution cause i have the same prob now :crying::crying:
the Bootlouder
jamjoom89 said:
hay man what did u do about this issue did find a solution cause i have the same prob now :crying::crying:
Click to expand...
Click to collapse
my friend i dont know if the problem still on with you but the only way to have your phone back to normal is by flashing a new Bootlouder to your phone by odin just find the boot file and use odin to install it and no more fail
yaho..................................................... its work try odin 3.07
ty yes working with odin 3.07
mustapha47 said:
yaho..................................................... its work try odin 3.07
Click to expand...
Click to collapse
:good::good::good: working with odin 3.07 try it
working with odin 3.07 perfectly
HI there
I had a bootloop issue with my sg3. I am unable to get into recovery mode so All I am able to do is get into Download mode ( Odin)
Tried to flash a stock firmware and this is what happens
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMF1_I9300TMUEMF1_I9300BVEMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> system.img
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried this is on multiple computers and same issue. After a bit of googling I gather its to do with my partition being read only or something but I am too much of a noob to try and go play about with that stuff
can some one please help me and direct me .
I just want the phone to work again, Its outside warranty and i cant afford to buy a new one
Try getting different firmware and try again...
And, please, next time post in correct forum
Sent from my GT-I9300 using xda app-developers app
When i setup Rom Stock 4.1.2 I9305TDVBME2_I9305TTELBME1_TEL by Odin, i have problem. I can't setup to my phone, allway FAIR z :
in Odin :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305TDVBME2_I9305TTELBME1_I9305TDVBME1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> recovery.img
<ID:0/003> modem.bin
<ID:0/003> tz.img
<ID:0/003> sboot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
in phone :
Unsupported Version
I think may be i setup wrong Rom
Plz help me, thanks
I've come across various other threads concerning this topic with other devices, but none are exactly like my issue.
I rooted originally with Odin and CF autoroot with no issues. Now me being the noob that I am, I un-rooted with Kies to check for any updates. The process went fine, however my device status still says "custom" and I'm unable to re-root using the same method that I did before. I get a "fail" in Odin after the cache.img process and have to remove the battery to reboot device.
Has anyone had this issue or am I the only idiot to unroot this beast of a phone?
Best bet. Odin back to stock and then reroot and forget about updates.
BAD ASS NOTE 4 + BAD ASS GEAR S
I just tried that. Downloaded the firmware from sammobile and used Odin to install it. Then proceeded to re-root using CF autoroot again. Same "fail" message.
my Odin is as follows:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-trltetmo-trltetmo-smn910t.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.ext4
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
where's the issue?
I'd try a different version of Odin.
Razorfengraul said:
I just tried that. Downloaded the firmware from sammobile and used Odin to install it. Then proceeded to re-root using CF autoroot again. Same "fail" message.
my Odin is as follows:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-trltetmo-trltetmo-smn910t.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.ext4
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
where's the issue?
Click to expand...
Click to collapse
As said diff version or bad cf autoroot download. It can be many things. Try a fresh download of everything. Also when u Odin back to stock it went fine so it is something after. Bad download
BAD ASS NOTE 4 + BAD ASS GEAR S
Issues began when I installed Lollipop on rooted phone. When flashing a custom rom it will not boot up. I cannot get to a recovery screen but can put it in download mode (Odin). I have downloaded the stock ATT rom and attempted to flash with odin but it fails everytime. I get the following on the screen.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
I have updated the samsung drivers and do not know where to go from here. any help is appreciated.
Gdogius