Odin failed to flash galaxy mini gt-s5570i giving this error
Odin errors:
Odin3 1.3
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> Leave CS..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin3 1.85
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5570IJPLF1_S5570iOJPLE2_S5570IXXLD6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin Multi Downloader 4.38 (Couldn't even read the phone could somebody give me working driver??)
ROM used:
GT-S5570i Egypt version < because im egyptian
S5570IJPLF1_S5570iOJPLE2_S5570IXXLD6_HOME.tar
Any idea??
Please i have tried many methods to flash it but all in vain :crying::crying:
Thanks
When using Odin to Flash, Open task manager and close these : Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe
try different USB ports on your comp (the ones at the back seem to work best), different USB cables, with the battery in and out, with the SD card removed if you have to. It'll work eventually, It just takes a lot of patience.
mostafaz4 said:
Odin failed to flash galaxy mini gt-s5570i giving this error
Odin errors:
Odin3 1.3
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> Leave CS..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin3 1.85
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5570IJPLF1_S5570iOJPLE2_S5570IXXLD6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin Multi Downloader 4.38 (Couldn't even read the phone could somebody give me working driver??)
ROM used:
GT-S5570i Egypt version < because im egyptian
S5570IJPLF1_S5570iOJPLE2_S5570IXXLD6_HOME.tar
Any idea??
Please i have tried many methods to flash it but all in vain :crying::crying:
Thanks
Click to expand...
Click to collapse
You can install the driver by switching on your phone and press the button to enable file transfer via USB.This usually triggers the computer to download the SamSung driver.
Sent from GALAXY mini...Please Thank Me when you think I deserve it
Ri3v| said:
You can install the driver by switching on your phone and press the button to enable file transfer via USB.This usually triggers the computer to download the SamSung driver.
Sent from GALAXY mini...Please Thank Me when you think I deserve it
Click to expand...
Click to collapse
Hi!.
I have the same problem.
I can not flash my GT-S5570i, allway boot.img fail, bcmcp.img fail... ... ...
I have installed Kies + Odin 1.84 (GT-S5570i edition)
-------------------------
FIXED:
http://forum.xda-developers.com/showthread.php?t=2484904
you must split it into 3 files. pda, modem and csc. just stick to 1.84. search for samsung usb drivers and unistall that kies then install samsung usb drivers.
---------- Post added at 06:50 PM ---------- Previous post was at 06:45 PM ----------
here's the link for Samsung Usb Drivers
here's is the ODINATRIX for splitting that into 3 files (pda, modem (phone), csc)
if you having problem that you can splitFUS tool. it's like odinatrix too
mostafaz4 said:
Odin failed to flash galaxy mini gt-s5570i giving this error
Odin errors:
Odin3 1.3
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> Leave CS..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin3 1.85
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5570IJPLF1_S5570iOJPLE2_S5570IXXLD6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin Multi Downloader 4.38 (Couldn't even read the phone could somebody give me working driver??)
ROM used:
GT-S5570i Egypt version < because im egyptian
S5570IJPLF1_S5570iOJPLE2_S5570IXXLD6_HOME.tar
Any idea??
Please i have tried many methods to flash it but all in vain :crying::crying:
Thanks
Click to expand...
Click to collapse
hay man what did u do about this issue did find a solution cause i have the same prob now :crying::crying:
the Bootlouder
jamjoom89 said:
hay man what did u do about this issue did find a solution cause i have the same prob now :crying::crying:
Click to expand...
Click to collapse
my friend i dont know if the problem still on with you but the only way to have your phone back to normal is by flashing a new Bootlouder to your phone by odin just find the boot file and use odin to install it and no more fail
yaho..................................................... its work try odin 3.07
ty yes working with odin 3.07
mustapha47 said:
yaho..................................................... its work try odin 3.07
Click to expand...
Click to collapse
:good::good::good: working with odin 3.07 try it
working with odin 3.07 perfectly
Related
Ok.. problem is
<OSM> P7300XWLC3_P7300XXKJ6_P7300SFRLC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> boot.img.md5
<ID:0/012> NAND Write Start!!
<ID:0/012> cache.img.md5
<ID:0/012> hidden.img.md5
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7300OXAKJ6_P7300XXKJ6_P7300XXKJ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> bootloader.bin.md5
<ID:0/003> cache.img.md5
<ID:0/003> hidden.img.md5
<ID:0/003> recovery.img.md5
<ID:0/003> system.img.md5
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Whats wrong? why i can't install original rom?
Please upload bootloader, CSC, Phone, PDA files stock rom.
Or upload P7300ZSKK2_P7300ZZHKK2_TGY.zip
Why do you want this one specifically??
It seems your file is corrupted, so the best solution is to download the latest Odin firmware,
And so here is a link for the latest Samsung firmware for P7300:
SAMMobile.com-GT-P7300-XFV-P7300XXLQJ-P7300XFVLP4.zip - 485.49 MB
Download extract and flash through Odin and enjoy
Sent From My New Xperia Z1 Compact (Xperia U I shall put you in the garbage )
Hello
i want to go back to original stock rom. I privously had nameless rom (kitkat). I downloaded the stock rom from sammobile and flashed the rom via odin. In odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7300XXLQD_P7300OXXLP5_P7300XXLQ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.md5
<ID:0/003> hidden.img.md5
<ID:0/003> modem.bin.md5
<ID:0/003> recovery.img.md5
<ID:0/003> system.img.md5
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
than the tab restarts. but than it stocks on the samsung screen and doesnt complete the booting process.
what did i do wrong?
knorki said:
Hello
i want to go back to original stock rom. I privously had nameless rom (kitkat). I downloaded the stock rom from sammobile and flashed the rom via odin. In odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7300XXLQD_P7300OXXLP5_P7300XXLQ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.md5
<ID:0/003> hidden.img.md5
<ID:0/003> modem.bin.md5
<ID:0/003> recovery.img.md5
<ID:0/003> system.img.md5
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
than the tab restarts. but than it stocks on the samsung screen and doesnt complete the booting process.
what did i do wrong?
Click to expand...
Click to collapse
Flash CWM 5.5.0.4 through odin then enter it and do a full wipe [format /system & /data]
then flash the ROM again.
If that didn't work, then download another odin stock ROM and flash it, here is the latest one
omarainea said:
Flash CWM 5.5.0.4 through odin then enter it and do a full wipe [format /system & /data]
then flash the ROM again.
If that didn't work, then download another odin stock ROM and flash it, here is the latest one
Click to expand...
Click to collapse
thx full wipe and flash again worked
i have problem.... my gfs samsung s i9070 somehow bricked and wont pass through the bootscreen. wont let me enter recovery,,but it goes to download mode. i tried to flash it with stock rom but every time i get fail msg and error on mby 20-30% progress... can anyone explain me what am i doing wrong ??
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9070XXLQE_I9070OXXLQE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> kernel.bin.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> modem.bin.md5
<ID:0/003> system.img.md5
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Kenannp said:
i have problem.... my gfs samsung s i9070 somehow bricked and wont pass through the bootscreen. wont let me enter recovery,,but it goes to download mode. i tried to flash it with stock rom but every time i get fail msg and error on mby 20-30% progress... can anyone explain me what am i doing wrong ??
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9070XXLQE_I9070OXXLQE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> kernel.bin.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> modem.bin.md5
<ID:0/003> system.img.md5
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
Try other USB port. Let me known if it works.
Force said:
Try other USB port. Let me known if it works.
Click to expand...
Click to collapse
did try... even tried on other pc but still same problem... went to buddy to repair it in service shop... he said that something is wrong with usb on the phone... so i left it there to get fixed. thx tho
Issues began when I installed Lollipop on rooted phone. When flashing a custom rom it will not boot up. I cannot get to a recovery screen but can put it in download mode (Odin). I have downloaded the stock ATT rom and attempted to flash with odin but it fails everytime. I get the following on the screen.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
I have updated the samsung drivers and do not know where to go from here. any help is appreciated.
Gdogius
I have a sprint galaxy note 5. I accidently formatted in twrp. Since then its' stuck here ( NOTE: I WAS ON 5.1.1 AND I'M TRYING TO FLASH 6.0.1 I HAVE THE 6.0 TWRP THAT IS REQUIRED)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPU2BPD2_N920PSPT2BPD2_N920PVPU2BPD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
Click to expand...
Click to collapse
Anyone have any ideas at all? I have no way to get a replacement until next week so I'm gonna do what I can to get this working. Any additional info can be provided
what I've tried:
different ROM ( could be using the wrong one)
N920PVPU2BPC3_N920PSPT2BPC3_N920PVPU2BPC3_HOME.tar.md5
N920PVPU2BPD2_N920PSPT2BPD2_N920PVPU2BPD2_HOME.tar.md5
ALL_SPT_N920PVPU2BPC3_N920PSPT2BPC3_CL7231607_QB8832851_REV00_user_low_ship.tar.md5
all of these have the same problem. I am starting with a clean phone pretty much. system 0 bytes data 0 bytes
I have noticed that /system won't mount in TWRP when trying to repair the directory possibly this has something to do with it
Any advice at all is welcome. I have no clue where to go from here
EDIT: Just tried a new usb port and it worked after 7 hours of trying over and over
I would try to get my hands on an updated stock rom bundled with boot image and kernel and try that with odin. Also be sure you are using the right Odin.