Related
hi guys,
my phone doen't work anymore..
when i press the power button nothing happens.
when i try to get into odin mode nothing happens.
when i plug in usb cable nothing happens.
its totally dead.
anyone idea what i can do?
or shall i send it to samsung?
thanks
lol4it said:
hi guys,
my phone doen't work anymore..
when i press the power button nothing happens.
when i try to get into odin mode nothing happens.
when i plug in usb cable nothing happens.
its totally dead.
anyone idea what i can do?
or shall i send it to samsung?
thanks
Click to expand...
Click to collapse
What exactly did you do to arrive at that point?
Sent from my GT-N7000 using Tapatalk 2
tried to flash using odin 1.85
ehmmm maybe try to charge battery. And sometimes phone works but screen isnt, try to go in download mode and to check is it connecting to odin even if screen is black ;D gl
batterie is charged.
already tried everything i know
i dont think so that after flashing with 1.85 odin you would get hard brick, i think that you messed up with files in not right sections and baam- brick :/
yes youre right
i just plugged into my pc and windows is searching for samsung mobile usb composite device drivers..
and now finaly odin found it too
i think i just paniced too hard...
where can i get a original firmware?
lol4it said:
yes youre right
i just plugged into my pc and windows is searching for samsung mobile usb composite device drivers..
and now finaly odin found it too
i think i just paniced too hard...
where can i get a original firmware?
Click to expand...
Click to collapse
www.sammobile.com all official firmwares ;D
ok gonna try:
GT-N7000 N7000XXLPY 4.0.3 2012 May N7000OXALPY Open Germany Download Unlock
(got vodafone germany)
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
lol4it said:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
you extracted zip file? you need to put .tar file at PDA ^^
ok
now my pc find my phone as unknown device -.-
and odin nothign..
ok worked now:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
but when i press power button still black screen??
EDIT: do i have to change standard settings like re-partition or flash lock?
lol4it said:
ok worked now:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
but when i press power button still black screen??
EDIT: do i have to change standard settings like re-partition or flash lock?
Click to expand...
Click to collapse
i didnt change settings like re-partition and etc. You fcked up something, a lot of people flashed without problems
yes i know =(
but i dont think my screen is broken..
wtf is this?? someone must help me
i got sound and everthing but dat screen is BLACK
Sorry mate phone had dont suppose u would sell as need screen for mine as drop it
Sent from my GT-N7000 using xda premium
Tried to flash aokp jb 4.1.2 milestone1 rom on my galaxy note ics 4.0.4.Launched cwm recovery mode and wiped data,which went off fine but when I flashed the aokp milestone 1 rom the whole thing stuck for few minutes and suddenly the screen went blank.I waited long hoping it would restart... but it didnt.Opened the battery,reinstall it and tried to switch on but failed..I also tried to launch the Cwm recovery ,also tried the download mode but the phone refused to start.... please help....
dead battery?
nokiamodeln91 said:
dead battery?
Click to expand...
Click to collapse
No... I charged the phone before proceeding....it was around 90-95% when I started....!!!
I have a Galaxy Note which has never been rooted and has the factory Gingerbread ROM running.
This morning it worked fine, then a couple of hours later the screen was black and I couldn't turn it on. So I removed and replaced the battery and turned the phone on. Ever since then, and no matter how many times I turn it off/on, it just freezes on the Samsung logo screen with the logo fading in/out.
What's the solution and what has gone wrong with it?
EViS said:
I have a Galaxy Note which has never been rooted and has the factory Gingerbread ROM running.
This morning it worked fine, then a couple of hours later the screen was black and I couldn't turn it on. So I removed and replaced the battery and turned the phone on. Ever since then, and no matter how many times I turn it off/on, it just freezes on the Samsung logo screen with the logo fading in/out.
What's the solution and what has gone wrong with it?
Click to expand...
Click to collapse
I would suggest booting into recovery and doing a factory reset. If that doesn't work use Odin to reflash the stock firmware, and see if that fixes things.
Sent from my SCH-I535 using xda premium
My phone is still in warranty. Am I right in thinking that using ODIN will void the warranty?
How do you boot into recovery on a factory ROM?
instal a stok rom with odin
EViS said:
My phone is still in warranty. Am I right in thinking that using ODIN will void the warranty?
How do you boot into recovery on a factory ROM?
Click to expand...
Click to collapse
Get a stock rom from dr. Ketan's thread in the original development. Press volume down+power+home buttons to boot into download mode then you can flash the rom you got using pc odin. It won't affect the warranty as it will not raise the counter and because you are flashing a stock rom
Sent from my GT-N7000 using xda app-developers app
What could have caused this crash? My only concern is that it could be a hardware memory fault, hence it would be worth sending it out to Samsung just in case.
Just flashed a stock UK ROM via PC Odin.
It showed Pass with the following Messages:
Code:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA6_N7000XXLA4_N7000XEULA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> cache.img
<ID:0/009> NAND Write Start!!
<ID:0/009> factoryfs.img
<ID:0/009> hidden.img
<ID:0/009> modem.bin
<ID:0/009> zImage
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
However, upon booting the phone is still stuck on the Samsung logo . Any further suggestions?
EViS said:
Just flashed a stock UK ROM via PC Odin.
It showed Pass with the following Messages:
Code:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA6_N7000XXLA4_N7000XEULA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> cache.img
<ID:0/009> NAND Write Start!!
<ID:0/009> factoryfs.img
<ID:0/009> hidden.img
<ID:0/009> modem.bin
<ID:0/009> zImage
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
However, upon booting the phone is still stuck on the Samsung logo . Any further suggestions?
Click to expand...
Click to collapse
Now that you have flashed the stock image, boot into recovery and try a factory reset again.
A factory reset fixed it! Why did I have to do a factory reset AFTER installing the new ROM? Why didn't the new ROM installation work on its own? Looking for a technical answer here .
May be the battery went dead because of which the some data got corrupted.
If I am not wrong it was stuck at the Samsung glowing logo?
data corruption causes boot loops and a factory reset will solve it
the rom you installed was a non wipe rom which does not do a wipe and just upgrades the os to stock so the corrupted data still remained. thus required a reset
Thank you for the explanation .
nokiamodeln91 said:
May be the battery went dead because of which the some data got corrupted.
If I am not wrong it was stuck at the Samsung glowing logo?
data corruption causes boot loops and a factory reset will solve it
the rom you installed was a non wipe rom which does not do a wipe and just upgrades the os to stock so the corrupted data still remained. thus required a reset
Click to expand...
Click to collapse
good explanation:good:
Hay guys.Sorry to open new thread,but I really need help.I got galaxy note (N7000) and the problem is that is stuck ob samsung boot logo.I have tried every single solution I could find on the web,but with no luck.I dont even know on what rom is ATM because i got it in this condition.All I know is that it was bought in Austria
PLEASE HELP!!!!
Have you tried booting it into recovery mode or download mode?
Recovery: Press Home + Volume Up + Power On. Stay pressed until GT-N7000 logo comes up.
Download: Press Home + Volume Down + Power On. Stay pressed until GT-N7000 logo comes up.
Nibb31 said:
Have you tried booting it into recovery mode or download mode?
Recovery: Press Home + Volume Up + Power On. Stay pressed until GT-N7000 logo comes up.
Download: Press Home + Volume Down + Power On. Stay pressed until GT-N7000 logo comes up.
Click to expand...
Click to collapse
i can only get it in download mode.when i try to start recovery mode the phone stops at samsung logo and just hangs there all day
Go to the download mode, flash a stock ROM for your region using PC ODIN and go thru dr.ketan's thread in the original Android development forum. Flash a stock ROM and then flash a kernel like the PhilZ kernel that you'll find in the thread on how to root and this boot loop bug will be out forever.
thanks for your effort Varad,but still not luck.I guess I got a pretty expensive paper weight :crying:
bizzare187 said:
thanks for your effort Varad,but still not luck.I guess I got a pretty expensive paper weight :crying:
Click to expand...
Click to collapse
post the result or screenshot of pc odin or just mention where is it getting stuck while flashing.
flashing goes without problem,but when the phone reboots it stucks on samsung logo
bizzare187 said:
flashing goes without problem,but when the phone reboots it stucks on samsung logo
Click to expand...
Click to collapse
do you get message on pc oding saying success1/failed0?
yes i get that message and then phone reboots.and it stucks
bizzare187 said:
yes i get that message and then phone reboots.and it stucks
Click to expand...
Click to collapse
have you tried flashing again?
treacherous_hawk said:
have you tried flashing again?
Click to expand...
Click to collapse
yes i did.i will do it again now and post odin messages
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000OXXLP7_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> cache.img
<ID:0/008> NAND Write Start!!
<ID:0/008> hidden.img
<ID:0/008> factoryfs.img
<ID:0/008> zImage
<ID:0/008> modem.bin
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!
And yet it is stuck on the boot logo? Well that thing about the paperweight seems to be right now
Varad297 said:
And yet it is stuck on the boot logo? Well that thing about the paperweight seems to be right now
Click to expand...
Click to collapse
friend told me to try a full wipe rom.is it a good idea?if it is,i just wanna know if it is flashable via odin.
Look haven't you wiped data before flashing ROMs? And yes any full wipe ROM with a .tar file is flashable via odin. But a full wipe ROM is of no use if you wipe data and cache before a flash, it's the same.
Varad297 said:
Look haven't you wiped data before flashing ROMs? And yes any full wipe ROM with a .tar file is flashable via odin. But a full wipe ROM is of no use if you wipe data and cache before a flash, it's the same.
Click to expand...
Click to collapse
no i havent wiped anything.i got the phone in this condition.i can only enter download mode.when i try to enter recovery mode the phone stucks at logo.same thing if i just try to turn it on.
Yes try a full wipe ROM then, no harm in trying...
tried the wipe ROM.still no luck
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXKL8_CL840182_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXKL8_REV_05_CL1089796.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXAKL8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> Sbl.bin
<ID:0/008> param.lfs
<ID:0/008> zImage
<ID:0/008> factoryfs.img
<ID:0/008> data.img
<ID:0/008> cache.img
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008> Receive Response form LOKE
<ID:0/008> cache.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!
still under warranty?
Get to the service center...that's the only way i see out of this...
treacherous_hawk said:
still under warranty?
Click to expand...
Click to collapse
no,warranty is expired
Varad297 said:
Get to the service center...that's the only way i see out of this...
Click to expand...
Click to collapse
thanks a lot everybody for trying
I need urgent help, I was using TWRP manager and tried to install that over the clockword mod recovery, now the phone is n a booting into recovery loop and wont boot at all.
I was using resurrection remix as a custom rom and that was 6.0.1. Is there anyway I can go back to 5.1.1 stock? I get SW REV Check Failed:Fused 2>Binary 1
Want to help
darksarken said:
I need urgent help, I was using TWRP manager and tried to install that over the clockword mod recovery, now the phone is n a booting into recovery loop and wont boot at all.
Click to expand...
Click to collapse
If you remember what version of android were you on?
Can you boot into download mode?
If you can answer those 2 questions then my best guess is you can ODIN back to stock with out an issue.
Just download ODIN 3.09 from some where shouldn't be to hard to find.
and download the top link from here: http://forum.xda-developers.com/note-4-tmobile/development/mirror-stock-tw-t3260858
unzip the samsung firmware(only once), put your phone in download mode, plug it into your computer, open odin, click "AP" and find the file that you just unzipped
make sure you click no boxes but "AP" and hit start and let odin do its thing.If yu have any questions Id be glad to answer
Help
BoiBundy said:
If you remember what version of android were you on?
Can you boot into download mode?
If you can answer those 2 questions then my best guess is you can ODIN back to stock with out an issue.
Just download ODIN 3.09 from some where shouldn't be to hard to find.
and download the top link from here: http://forum.xda-developers.com/note-4-tmobile/development/mirror-stock-tw-t3260858
unzip the samsung firmware(only once), put your phone in download mode, plug it into your computer, open odin, click "AP" and find the file that you just unzipped
make sure you click no boxes but "AP" and hit start and let odin do its thing.If yu have any questions Id be glad to answer
Click to expand...
Click to collapse
Okay after this passed my phone is still rebooting in a loop for some reason? Do you know why?
darksarken said:
Okay after this passed my phone is still rebooting in a loop for some reason? Do you know why?
Click to expand...
Click to collapse
Factory reset from recovery should fix it.
Sent from my SM-N910T using XDA Free mobile app
darksarken said:
Okay after this passed my phone is still rebooting in a loop for some reason? Do you know why?
Click to expand...
Click to collapse
Raptor is right, pull your battery for about 20 seconds replace it and hold volume+up and home while powering on. And you should be presented with a dead android. From there I believe you factory reset your phone.
Sorry, in literally always busy but here is the exact step by step method of resetting from recovery:
Turn off the phone. If the phone will not turn off, remove and re-insert the battery.
Press and hold the following three buttons at the same time:
Volume Up key
Home key
Power key.
When the phone vibrates, release the Power key.
When the Android System Recovery screen appears, release all keys.
Press the Volume down key several times key to highlight 'wipe data / factory reset.'
Press Power button to select.
Press the Volume down key until 'Yes -- delete all user data' is highlighted.
Press Power button to select and start the master reset.
When the master reset is complete, 'Reboot system now' is highlighted.
Press the Power key to restart the device
I'm actually having the same issue, but seems more complicated.
I was using resurrectionremix, and bluetooth/lte wasn't working so well so I decided to factory reset it and install the stock factory image.
But when I try to flash using Odin (3.07, 3.09 tried both) it gives me this error.
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> aboot.mbn
<ID:0/015> NAND Write Start!!
<ID:0/015> sbl1.mbn
<ID:0/015> rpm.mbn
<ID:0/015> FAIL! (Auth)
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on the phone
UDC START
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
[1]eMMC write fail : ABOOT
And teh firmwares I tried are
NIH, NK4, COD
MTP Isn't working, the phone isn't recognizing my microSD card either so there's no way for me to flash anything through zip TWRP.
Can somebody help me out? Thanks
Stiria said:
I'm actually having the same issue, but seems more complicated.
I was using resurrectionremix, and bluetooth/lte wasn't working so well so I decided to factory reset it and install the stock factory image.
But when I try to flash using Odin (3.07, 3.09 tried both) it gives me this error.
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> aboot.mbn
<ID:0/015> NAND Write Start!!
<ID:0/015> sbl1.mbn
<ID:0/015> rpm.mbn
<ID:0/015> FAIL! (Auth)
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on the phone
UDC START
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
[1]eMMC write fail : ABOOT
And teh firmwares I tried are
NIH, NK4, COD
MTP Isn't working, the phone isn't recognizing my microSD card either so there's no way for me to flash anything through zip TWRP.
Can somebody help me out? Thanks
Click to expand...
Click to collapse
By chance are you already on 5.1.1 firmware, if you are you can't downgrade back to those lower fws and the stock factory Odin is dok2. Try that 1 instead.
Sent from my SM-N920T using Tapatalk
Hi I'm new to XDA. My Note 8 (N950U) won't boot past the Samsung Galaxy Note 8 powered by android screen.
I can access the download mode and have flashed the stock firmware. But as soon as it reboots it gets stuck on the same screen.
Any help regarding this is much appreciated
factory reset.
android-incredible said:
factory reset.
Click to expand...
Click to collapse
I cant enter the recovery to perform a factory reset
RPG-XDA said:
I cant enter the recovery to perform a factory reset
Click to expand...
Click to collapse
Flash all 4 files in Odin instead of using home-csc file use CSC file. This will erase phone. Also make sure your on the latest Odin and using the same bootloader version.
Sent from my SM-N950F using Tapatalk
BluePhnx said:
Flash all 4 files in Odin instead of using home-csc file use CSC file. This will erase phone. Also make sure your on the latest Odin and using the same bootloader version.
Sent from my SM-N950F using Tapatalk
Click to expand...
Click to collapse
I already tried flashing both the HOME_CSC and CSC separately, but it didn't work. I'm able to successfully flash the firmware, but the phone is still stuck at the powered by android screen.
Do you know what caused the issue in the first place? Was it just on stock and suddenly won't boot? Were you using Samfail or anything like that? Just trying to narrow down the issue, because flashing stock should usually work.
sefrcoko said:
Do you know what caused the issue in the first place? Was it just on stock and suddenly won't boot? Were you using Samfail or anything like that? Just trying to narrow down the issue, because flashing stock should usually work.
Click to expand...
Click to collapse
Yes, I was on stock Oreo. Haven't tried rooting it or installing custom recovery. I came across some posts on the S8 forum with the same issue, but the solution mentioned there isn't working for me.
https://forum.xda-developers.com/galaxy-s8/help/galaxy-s8-g950fd-stuck-logo-flash-t3647926
RPG-XDA said:
Yes, I was on stock Oreo. Haven't tried rooting it or installing custom recovery. I came across some posts on the S8 forum with the same issue, but the solution mentioned there isn't working for me.
https://forum.xda-developers.com/galaxy-s8/help/galaxy-s8-g950fd-stuck-logo-flash-t3647926
Click to expand...
Click to collapse
Which Odin version are you using?
sefrcoko said:
Which Odin version are you using?
Click to expand...
Click to collapse
Odin 3 v3.13.1
RPG-XDA said:
Odin 3 v3.13.1
Click to expand...
Click to collapse
Possible to show a screenshot of Odin after the flash? To see the log messages and firmware version being flashed?
sefrcoko said:
Possible to show a screenshot of Odin after the flash? To see the log messages and firmware version being flashed?
Click to expand...
Click to collapse
Firmware version: N950U1UES5CRF6_N950U1OYM5CRF6_ATT
Odin log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 6197 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> bksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> tz.mbn
<ID:0/003> hyp.mbn
<ID:0/003> devcfg.mbn
<ID:0/003> pmic.elf
<ID:0/003> rpm.mbn
<ID:0/003> cmnlib.mbn
<ID:0/003> cmnlib64.mbn
<ID:0/003> keymaster.mbn
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> sec.dat
<ID:0/003> NON-HLOS.bin
<ID:0/003> storsec.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> persist.img.ext4
<ID:0/003> dqmdbg.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> adspso.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img.ext4
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Still stuck at the same boot screen. Still wondering why the Odin flash is successful, but the phone doesn't seem to even have a recovery to boot into.
RPG-XDA said:
Still stuck at the same boot screen. Still wondering why the Odin flash is successful, but the phone doesn't seem to even have a recovery to boot into.
Click to expand...
Click to collapse
Use USB 2.0,Also try unplugging it mid flash, Then reboot the phone, Does it boot to the screen where it tells you to connect with Smartswitch?
Samsunguser932 said:
Use USB 2.0,Also try unplugging it mid flash, Then reboot the phone, Does it boot to the screen where it tells you to connect with Smartswitch?
Click to expand...
Click to collapse
I tried your suggestion and I now get the screen which tells me to connect to smart switch. But when I run Smart Switch, it says the connected device cannot be recognized and Emergency recovery mode doesn't list the phone
RPG-XDA said:
I tried your suggestion and I now get the screen which tells me to connect to smart switch. But when I run Smart Switch, it says the connected device cannot be recognized and Emergency recovery mode doesn't list the phone
Click to expand...
Click to collapse
Okay, Just use ODIN then to try and restore it from that screen, Maybe that will work, Also try Smartswitch from Download mode, Make sure your drivers are installed.
Samsunguser932 said:
Okay, Just use ODIN then to try and restore it from that screen, Maybe that will work, Also try Smartswitch from Download mode, Make sure your drivers are installed.
Click to expand...
Click to collapse
I have installed all my drivers, but Smartswitch still won't detect my device. After flashing with Odin it goes back to being stuck on the Powered by android screen.
RPG-XDA said:
I have installed all my drivers, but Smartswitch still won't detect my device. After flashing with Odin it goes back to being stuck on the Powered by android screen.
Click to expand...
Click to collapse
When you flash with odin select Nand Erase from your options. then youll be able to boot if you flash WITH the AP,BL,CP and CSC
me2151 said:
When you flash with odin select Nand Erase from your options. then youll be able to boot if you flash WITH the AP,BL,CP and CSC
Click to expand...
Click to collapse
I tried using the Nand Erase option as you suggested, but it didn't change anything. I was just trying various button combinations and suddenly got the grey circle with the lightning bolt, but it wasn't charging. After some time the phone turned off and I haven't been able to get to that screen again. Any idea of what that could be?
Thats just the off mode charging(also known as low power mode)
me2151 said:
Thats just the off mode charging(also known as low power mode)
Click to expand...
Click to collapse
Oh. Didn't know that But even in that mode the phone just shows that symbol, even after I disconnect it from power.
Could this be a issue with the motherboard or is it just software, because I can still get into download mode and flash successfully?