Database Develop

Doesn't switch on after flashing HELP NEEDED

Hi,
my girlfriend just came back from China with a P1000 from her friend. As the whole device was running on chinese language and for some strange reason it was not possible to enter System Setting to change the language, I decided to flash her the latest firmware and just make a fresh start. (i'm a flash veteran on my SGS since 2 years, so I know how to use Odin)
I downloaded the P1000XWJQ8 from Sammobile, fired up Odin and flashed the new ROM with repartition enabled.
The procedure went through without errors:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P1000XWJQ8_P1000XXJPZ_P1000DBTJQ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> hidden.rfs
<ID:0/003> modem.bin
<ID:0/003> factoryfs.rfs
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/003> Added!!
At the end of it the device didn't auto-boot as expected, it just stayed there with a black screen!!!!!!
Disconnecting and reconnecting it triggers in Odin the REMOVED and the ADDED lines but nothing happens.
I cannot switch on, cannot go into download nor recovery, the device just seems to stay dead :-(
My next idea was trying to pull the battery but apparently the battery is glued to the casing, so before I do more damage, I better start asking here.
Hope someone can help, my girlfriend will kill me if I can't repair this damn thing...
EDIT: after having closed Odin on the PC I tried to connect the device again and it started to play the startup song and Win7 started to install the new drivers from the new firmware. 7 out of 9 found drivers installed correctly, 2 instead failed.
But nothing changed to the vegetarian state of the P1000
EDIT 2: now, after 12 hours wait, the device doesn't do anything anymore when I connect it to the PC, no USB connect, no sign of adding it in Odin. It seems like the charging mechanism doesn't work anymore either. The deivce appears totally dead.

Did you see my thread http://forum.xda-developers.com/showthread.php?t=1769144? This problem is totally the same as mine.
Is yours rooted? Coz it says here http://www.teamovercome.net/p1000/?page_id=17 that :
[REQUIRED FOR FROYO-BASED TABS ONLY:] Your Tab must be rooted. (Please look for SuperOneClick root method as it’s usually the safe bet! But for more information on rooting, please refer here: http://forum.xda-developers.com/showthread.php?t=812367)
Click to expand...
Click to collapse
I hope someone can help us, or else, no choice but to bring this to service center.

itenos said:
Hi,
my girlfriend just came back from China with a P1000 from her friend. As the whole device was running on chinese language and for some strange reason it was not possible to enter System Setting to change the language, I decided to flash her the latest firmware and just make a fresh start. (i'm a flash veteran on my SGS since 2 years, so I know how to use Odin)
I downloaded the P1000XWJQ8 from Sammobile, fired up Odin and flashed the new ROM with repartition enabled.
The procedure went through without errors:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P1000XWJQ8_P1000XXJPZ_P1000DBTJQ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> hidden.rfs
<ID:0/003> modem.bin
<ID:0/003> factoryfs.rfs
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/003> Added!!
At the end of it the device didn't auto-boot as expected, it just stayed there with a black screen!!!!!!
Disconnecting and reconnecting it triggers in Odin the REMOVED and the ADDED lines but nothing happens.
I cannot switch on, cannot go into download nor recovery, the device just seems to stay dead :-(
My next idea was trying to pull the battery but apparently the battery is glued to the casing, so before I do more damage, I better start asking here.
Hope someone can help, my girlfriend will kill me if I can't repair this damn thing...
EDIT: after having closed Odin on the PC I tried to connect the device again and it started to play the startup song and Win7 started to install the new drivers from the new firmware. 7 out of 9 found drivers installed correctly, 2 instead failed.
But nothing changed to the vegetarian state of the P1000
Click to expand...
Click to collapse
MarlX said:
Did you see my thread http://forum.xda-developers.com/showthread.php?t=1769144? This problem is totally the same as mine.
Is yours rooted? Coz it says here http://www.teamovercome.net/p1000/?page_id=17 that :
I hope someone can help us, or else, no choice but to bring this to service center.
Click to expand...
Click to collapse
hey guys, are sure your gtab is P1000??
see the back cover, and chek your gtab model to make sure.

qm4n76 said:
hey guys, are sure your gtab is P1000??
see the back cover, and chek your gtab model to make sure.
Click to expand...
Click to collapse
Yes, 100% sure, my one is a P1000. As wrote in EDIT2 my device now seems to be totally dead

Note Hung On Samsung Logo Screen - Stock ROM

I have a Galaxy Note which has never been rooted and has the factory Gingerbread ROM running.
This morning it worked fine, then a couple of hours later the screen was black and I couldn't turn it on. So I removed and replaced the battery and turned the phone on. Ever since then, and no matter how many times I turn it off/on, it just freezes on the Samsung logo screen with the logo fading in/out.
What's the solution and what has gone wrong with it?

EViS said:
I have a Galaxy Note which has never been rooted and has the factory Gingerbread ROM running.
This morning it worked fine, then a couple of hours later the screen was black and I couldn't turn it on. So I removed and replaced the battery and turned the phone on. Ever since then, and no matter how many times I turn it off/on, it just freezes on the Samsung logo screen with the logo fading in/out.
What's the solution and what has gone wrong with it?
Click to expand...
Click to collapse
I would suggest booting into recovery and doing a factory reset. If that doesn't work use Odin to reflash the stock firmware, and see if that fixes things.
Sent from my SCH-I535 using xda premium

My phone is still in warranty. Am I right in thinking that using ODIN will void the warranty?
How do you boot into recovery on a factory ROM?

instal a stok rom with odin

EViS said:
My phone is still in warranty. Am I right in thinking that using ODIN will void the warranty?
How do you boot into recovery on a factory ROM?
Click to expand...
Click to collapse
Get a stock rom from dr. Ketan's thread in the original development. Press volume down+power+home buttons to boot into download mode then you can flash the rom you got using pc odin. It won't affect the warranty as it will not raise the counter and because you are flashing a stock rom
Sent from my GT-N7000 using xda app-developers app

What could have caused this crash? My only concern is that it could be a hardware memory fault, hence it would be worth sending it out to Samsung just in case.

Just flashed a stock UK ROM via PC Odin.
It showed Pass with the following Messages:
Code:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA6_N7000XXLA4_N7000XEULA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> cache.img
<ID:0/009> NAND Write Start!!
<ID:0/009> factoryfs.img
<ID:0/009> hidden.img
<ID:0/009> modem.bin
<ID:0/009> zImage
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
However, upon booting the phone is still stuck on the Samsung logo . Any further suggestions?

EViS said:
Just flashed a stock UK ROM via PC Odin.
It showed Pass with the following Messages:
Code:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA6_N7000XXLA4_N7000XEULA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> cache.img
<ID:0/009> NAND Write Start!!
<ID:0/009> factoryfs.img
<ID:0/009> hidden.img
<ID:0/009> modem.bin
<ID:0/009> zImage
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
However, upon booting the phone is still stuck on the Samsung logo . Any further suggestions?
Click to expand...
Click to collapse
Now that you have flashed the stock image, boot into recovery and try a factory reset again.

A factory reset fixed it! Why did I have to do a factory reset AFTER installing the new ROM? Why didn't the new ROM installation work on its own? Looking for a technical answer here .

May be the battery went dead because of which the some data got corrupted.
If I am not wrong it was stuck at the Samsung glowing logo?
data corruption causes boot loops and a factory reset will solve it
the rom you installed was a non wipe rom which does not do a wipe and just upgrades the os to stock so the corrupted data still remained. thus required a reset

Thank you for the explanation .

nokiamodeln91 said:
May be the battery went dead because of which the some data got corrupted.
If I am not wrong it was stuck at the Samsung glowing logo?
data corruption causes boot loops and a factory reset will solve it
the rom you installed was a non wipe rom which does not do a wipe and just upgrades the os to stock so the corrupted data still remained. thus required a reset
Click to expand...
Click to collapse
good explanation:good:

[q] gt-n7000 need help!!!!

Hay guys.Sorry to open new thread,but I really need help.I got galaxy note (N7000) and the problem is that is stuck ob samsung boot logo.I have tried every single solution I could find on the web,but with no luck.I dont even know on what rom is ATM because i got it in this condition.All I know is that it was bought in Austria
PLEASE HELP!!!!

Have you tried booting it into recovery mode or download mode?
Recovery: Press Home + Volume Up + Power On. Stay pressed until GT-N7000 logo comes up.
Download: Press Home + Volume Down + Power On. Stay pressed until GT-N7000 logo comes up.

Nibb31 said:
Have you tried booting it into recovery mode or download mode?
Recovery: Press Home + Volume Up + Power On. Stay pressed until GT-N7000 logo comes up.
Download: Press Home + Volume Down + Power On. Stay pressed until GT-N7000 logo comes up.
Click to expand...
Click to collapse
i can only get it in download mode.when i try to start recovery mode the phone stops at samsung logo and just hangs there all day

Go to the download mode, flash a stock ROM for your region using PC ODIN and go thru dr.ketan's thread in the original Android development forum. Flash a stock ROM and then flash a kernel like the PhilZ kernel that you'll find in the thread on how to root and this boot loop bug will be out forever.

thanks for your effort Varad,but still not luck.I guess I got a pretty expensive paper weight :crying:

bizzare187 said:
thanks for your effort Varad,but still not luck.I guess I got a pretty expensive paper weight :crying:
Click to expand...
Click to collapse
post the result or screenshot of pc odin or just mention where is it getting stuck while flashing.

flashing goes without problem,but when the phone reboots it stucks on samsung logo

bizzare187 said:
flashing goes without problem,but when the phone reboots it stucks on samsung logo
Click to expand...
Click to collapse
do you get message on pc oding saying success1/failed0?

yes i get that message and then phone reboots.and it stucks

bizzare187 said:
yes i get that message and then phone reboots.and it stucks
Click to expand...
Click to collapse
have you tried flashing again?

treacherous_hawk said:
have you tried flashing again?
Click to expand...
Click to collapse
yes i did.i will do it again now and post odin messages
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000OXXLP7_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> cache.img
<ID:0/008> NAND Write Start!!
<ID:0/008> hidden.img
<ID:0/008> factoryfs.img
<ID:0/008> zImage
<ID:0/008> modem.bin
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!

And yet it is stuck on the boot logo? Well that thing about the paperweight seems to be right now

Varad297 said:
And yet it is stuck on the boot logo? Well that thing about the paperweight seems to be right now
Click to expand...
Click to collapse
friend told me to try a full wipe rom.is it a good idea?if it is,i just wanna know if it is flashable via odin.

Look haven't you wiped data before flashing ROMs? And yes any full wipe ROM with a .tar file is flashable via odin. But a full wipe ROM is of no use if you wipe data and cache before a flash, it's the same.

Varad297 said:
Look haven't you wiped data before flashing ROMs? And yes any full wipe ROM with a .tar file is flashable via odin. But a full wipe ROM is of no use if you wipe data and cache before a flash, it's the same.
Click to expand...
Click to collapse
no i havent wiped anything.i got the phone in this condition.i can only enter download mode.when i try to enter recovery mode the phone stucks at logo.same thing if i just try to turn it on.

Yes try a full wipe ROM then, no harm in trying...

tried the wipe ROM.still no luck
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXKL8_CL840182_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXKL8_REV_05_CL1089796.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXAKL8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> Sbl.bin
<ID:0/008> param.lfs
<ID:0/008> zImage
<ID:0/008> factoryfs.img
<ID:0/008> data.img
<ID:0/008> cache.img
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008> Receive Response form LOKE
<ID:0/008> cache.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!

still under warranty?

Get to the service center...that's the only way i see out of this...

treacherous_hawk said:
still under warranty?
Click to expand...
Click to collapse
no,warranty is expired
Varad297 said:
Get to the service center...that's the only way i see out of this...
Click to expand...
Click to collapse
thanks a lot everybody for trying

HELP !!!!!!! Unrooting Samsung S6 fail

Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks

Must use Odin v3.10.6
Neostatic17 said:
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Click to expand...
Click to collapse

wp4jot said:
Must use Odin v3.10.6
Click to expand...
Click to collapse
Hi wp4jot,
i have used odin 3.10.6 but it still don't work do you have an idea why its not working , or how can i solve this problem
Thanks

I don't. Did you flash all 4 files at once?
Neostatic17 said:
Hi wp4jot,
i have used odin 3.10.6 but it still don't work do you have an idea why its not working , or how can i solve this problem
Thanks
Click to expand...
Click to collapse

I had this problem.. You must have v3.10.6 and flash every file in the corresponding place, after that I still got a fail message but I tried un-checking the auto reboot option and that did the trick (this will make the phone stay in download mode even after you complete the flash, to quit download mode you must press the volume down button and the power button at the same time for about 10 seconds) hope that helps, let me know.

vontokkerths said:
I had this problem.. You must have v3.10.6 and flash every file in the corresponding place, after that I still got a fail message but I tried un-checking the auto reboot option and that did the trick (this will make the phone stay in download mode even after you complete the flash, to quit download mode you must press the volume down button and the power button at the same time for about 10 seconds) hope that helps, let me know.
Click to expand...
Click to collapse
I Have the same problem with S6- SMG20T (Dutch) Now trying to un-check the auto reboot otion. Hope it works for me.
didn't worked for me

wp4jot said:
I don't. Did you flash all 4 files at once?
Click to expand...
Click to collapse
What do you mean with that? witch 4 files?
Hope you can help me.
After a factory swipe and installing vodafone wallet on my S6 it says that it doesn't work on a rooted Phone

You have to put each file in the corresponding place, when you download the stock rom after you've extracted the zip you're supposed to have a file called AP, BL, CSC, AND the other which I cannot remember, those are the files you're supposed to flash, if you try to flash just AP like on the screenshot it's not going to work.

Neostatic17 said:
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Click to expand...
Click to collapse
I think you downloaded the wrong firmware for your phone, your phone is G920F and the firmware you are trying to flash is G925F.

@Neostatic17, it looks like you downloaded the wrong file. The file should be a tar.zip, not tar.md5. Once you download the correct tar.zip, extract the file and you will see 4 files within the one file you downloaded. Then flash all 4 files with odin.
Edit...Ok, I've checked my pc and the file is a tar.zip before you extract it and once it's extracted, there are 4 tar.md5 files. All you have to do is put the AP file in the AP slot, BL file in the BL slot and so on. I leave auto reboot checked, but that is up to you.

odin fail! when flashing stock rom. n920i

im running infinity note 7 port p8, and now i want to flash stock rom but im getting this: im flashing this N920IDVU3CQD3_N920IOLC3CQD3_N920IDVU3CQD2_HOME.tar
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
it was stuck then i reboot it, got an error saying:
an error has occurred while updating the device software. Use the Emergency recovery function in the smart switch pc software. i used that function but nothing happened, now it just stuck at this place.

Just turn it off and retry.

tried that already many times.

chailee said:
tried that already many times.
Click to expand...
Click to collapse
you are not trying hard enough. hurry up before the battery drains out or you are gonna have a really bad time
press power, vol - and home for 9 seconds. Nine. At the 10th second the phone WILL reboot, now you must enter recovery (power, vol + and home) to keep it off and after that you may try to get into download mode.

once the phone reboot, it would bring me back to the error page and wont let me get in to download mode.

Flash with repartition ticked and add pit file for firmware you are trying to flash

Where does the pit file go?

you have pit tab in odin, next to log and options

where can i find nougat pit file? only seen 5.1.1

is same pit for all android versions, make sure is for your csc

thank you guys for helping me out and replying back fast. i fixed the problem.