Database Develop

Full/Hard Bricked Galaxy Note

hi guys,
my phone doen't work anymore..
when i press the power button nothing happens.
when i try to get into odin mode nothing happens.
when i plug in usb cable nothing happens.
its totally dead.
anyone idea what i can do?
or shall i send it to samsung?
thanks

lol4it said:
hi guys,
my phone doen't work anymore..
when i press the power button nothing happens.
when i try to get into odin mode nothing happens.
when i plug in usb cable nothing happens.
its totally dead.
anyone idea what i can do?
or shall i send it to samsung?
thanks
Click to expand...
Click to collapse
What exactly did you do to arrive at that point?
Sent from my GT-N7000 using Tapatalk 2

tried to flash using odin 1.85

ehmmm maybe try to charge battery. And sometimes phone works but screen isnt, try to go in download mode and to check is it connecting to odin even if screen is black ;D gl

batterie is charged.
already tried everything i know

i dont think so that after flashing with 1.85 odin you would get hard brick, i think that you messed up with files in not right sections and baam- brick :/

yes youre right
i just plugged into my pc and windows is searching for samsung mobile usb composite device drivers..
and now finaly odin found it too
i think i just paniced too hard...
where can i get a original firmware?

lol4it said:
yes youre right
i just plugged into my pc and windows is searching for samsung mobile usb composite device drivers..
and now finaly odin found it too
i think i just paniced too hard...
where can i get a original firmware?
Click to expand...
Click to collapse
www.sammobile.com all official firmwares ;D

ok gonna try:
GT-N7000 N7000XXLPY 4.0.3 2012 May N7000OXALPY Open Germany Download Unlock
(got vodafone germany)

<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)

lol4it said:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
you extracted zip file? you need to put .tar file at PDA ^^

ok
now my pc find my phone as unknown device -.-
and odin nothign..

ok worked now:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
but when i press power button still black screen??
EDIT: do i have to change standard settings like re-partition or flash lock?

lol4it said:
ok worked now:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
but when i press power button still black screen??
EDIT: do i have to change standard settings like re-partition or flash lock?
Click to expand...
Click to collapse
i didnt change settings like re-partition and etc. You fcked up something, a lot of people flashed without problems

yes i know =(
but i dont think my screen is broken..

wtf is this?? someone must help me
i got sound and everthing but dat screen is BLACK

Sorry mate phone had dont suppose u would sell as need screen for mine as drop it
Sent from my GT-N7000 using xda premium

Tried to flash aokp jb 4.1.2 milestone1 rom on my galaxy note ics 4.0.4.Launched cwm recovery mode and wiped data,which went off fine but when I flashed the aokp milestone 1 rom the whole thing stuck for few minutes and suddenly the screen went blank.I waited long hoping it would restart... but it didnt.Opened the battery,reinstall it and tried to switch on but failed..I also tried to launch the Cwm recovery ,also tried the download mode but the phone refused to start.... please help....

dead battery?

nokiamodeln91 said:
dead battery?
Click to expand...
Click to collapse
No... I charged the phone before proceeding....it was around 90-95% when I started....!!!

soft bricked?

Hi all,
so i read the PSA and all the other info about bricking/ what not to load etc and took the plunge to update my kernel
Using odin, i flash the safe kernel DAFUQ_N7000_05272012.tar and everything went well and rebooted. Well this is where i'm stuck now
Reboots, i get the samsung screen with the yellow triangle now but that's it. nothing after that.
Read abit more and grab this kernel cm9_safe_kernel.tar and flash this. same thing.
I cannot get into recovery but i can get into download mode.
I read a few things about looking at repartitioning but as i didn't do a full wipe nor did a flash any roms, i don't think that is my issue.
Any suggestions?

flash a full GB firmware with ODIN and you should be fine
Once done, Root and use Triangle Away app to reset counter and remove the triangle

denti said:
Hi all,
so i read the PSA and all the other info about bricking/ what not to load etc and took the plunge to update my kernel
Using odin, i flash the safe kernel DAFUQ_N7000_05272012.tar and everything went well and rebooted. Well this is where i'm stuck now
Reboots, i get the samsung screen with the yellow triangle now but that's it. nothing after that.
Read abit more and grab this kernel cm9_safe_kernel.tar and flash this. same thing.
I cannot get into recovery but i can get into download mode.
I read a few things about looking at repartitioning but as i didn't do a full wipe nor did a flash any roms, i don't think that is my issue.
Any suggestions?
Click to expand...
Click to collapse
Try flash gb rom. http://androidadvices.com/update-galaxy-note-n7000-gingerbread-xxlc1-236-firmware/

Moved To Q&A​
Please post all questions in the Q&A section​

azzledazzle said:
flash a full GB firmware with ODIN and you should be fine
Once done, Root and use Triangle Away app to reset counter and remove the triangle
Click to expand...
Click to collapse
Do this....

thanks for the replies but wee confused...
isnt' DAFUQ_N7000_05272012.tar a GB firmware?
also isn't the CM9_safe_kernel.tar a GM firmware to use?
might you be able to suggest a firmware?
without going into much detail, what's the differences between the DAFUQ, CM9_safe firmware vs the GB firmware?
take care

denti said:
thanks for the replies but wee confused...
isnt' DAFUQ_N7000_05272012.tar a GB firmware?
also isn't the CM9_safe_kernel.tar a GM firmware to use?
might you be able to suggest a firmware?
without going into much detail, what's the differences between the DAFUQ, CM9_safe firmware vs the GB firmware?
take care
Click to expand...
Click to collapse
Flash Full GB STOCK ROM via PC ODIN and start again...
Also sounds a little bit like you were on ICS an have flashed a GB Kernel and rebooted....

denti said:
thanks for the replies but wee confused...
isnt' DAFUQ_N7000_05272012.tar a GB firmware?
also isn't the CM9_safe_kernel.tar a GM firmware to use?
might you be able to suggest a firmware?
without going into much detail, what's the differences between the DAFUQ, CM9_safe firmware vs the GB firmware?
take care
Click to expand...
Click to collapse
Its a kernel only.. Download full GB rom here.
http://forum.xda-developers.com/showthread.php?t=1424997
Sent from my GT-N7000 using XDA Premium App

Ok, so i downloaded N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 and tried to flash via odin and it failed
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> factoryfs.img
<ID:0/006> NAND Write Start!!
<ID:0/006> zImage
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
is the log.
any suggestions? I got firmware DAFUQ_N7000_05272012.tar
thank you

denti said:
Ok, so i downloaded N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 and tried to flash via odin and it failed
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> factoryfs.img
<ID:0/006> NAND Write Start!!
<ID:0/006> zImage
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
is the log.
any suggestions? I got firmware DAFUQ_N7000_05272012.tar
thank you
Click to expand...
Click to collapse
Read this carefully and understand. Is your device 16 gig? If yes. http://nguyenkieuhung1984.blogspot.com/2012/01/how-to-installflash-samsung-galaxy-note_09.html?m=1
Read 3C

azzledazzle said:
flash a full GB firmware with ODIN and you should be fine
Once done, Root and use Triangle Away app to reset counter and remove the triangle
Click to expand...
Click to collapse
Triangle away won't work on GB roms.
Try to reflash CF kernal using PC odin..

Fix it?

[q] gt-n7000 need help!!!!

Hay guys.Sorry to open new thread,but I really need help.I got galaxy note (N7000) and the problem is that is stuck ob samsung boot logo.I have tried every single solution I could find on the web,but with no luck.I dont even know on what rom is ATM because i got it in this condition.All I know is that it was bought in Austria
PLEASE HELP!!!!

Have you tried booting it into recovery mode or download mode?
Recovery: Press Home + Volume Up + Power On. Stay pressed until GT-N7000 logo comes up.
Download: Press Home + Volume Down + Power On. Stay pressed until GT-N7000 logo comes up.

Nibb31 said:
Have you tried booting it into recovery mode or download mode?
Recovery: Press Home + Volume Up + Power On. Stay pressed until GT-N7000 logo comes up.
Download: Press Home + Volume Down + Power On. Stay pressed until GT-N7000 logo comes up.
Click to expand...
Click to collapse
i can only get it in download mode.when i try to start recovery mode the phone stops at samsung logo and just hangs there all day

Go to the download mode, flash a stock ROM for your region using PC ODIN and go thru dr.ketan's thread in the original Android development forum. Flash a stock ROM and then flash a kernel like the PhilZ kernel that you'll find in the thread on how to root and this boot loop bug will be out forever.

thanks for your effort Varad,but still not luck.I guess I got a pretty expensive paper weight :crying:

bizzare187 said:
thanks for your effort Varad,but still not luck.I guess I got a pretty expensive paper weight :crying:
Click to expand...
Click to collapse
post the result or screenshot of pc odin or just mention where is it getting stuck while flashing.

flashing goes without problem,but when the phone reboots it stucks on samsung logo

bizzare187 said:
flashing goes without problem,but when the phone reboots it stucks on samsung logo
Click to expand...
Click to collapse
do you get message on pc oding saying success1/failed0?

yes i get that message and then phone reboots.and it stucks

bizzare187 said:
yes i get that message and then phone reboots.and it stucks
Click to expand...
Click to collapse
have you tried flashing again?

treacherous_hawk said:
have you tried flashing again?
Click to expand...
Click to collapse
yes i did.i will do it again now and post odin messages
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000OXXLP7_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> cache.img
<ID:0/008> NAND Write Start!!
<ID:0/008> hidden.img
<ID:0/008> factoryfs.img
<ID:0/008> zImage
<ID:0/008> modem.bin
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!

And yet it is stuck on the boot logo? Well that thing about the paperweight seems to be right now

Varad297 said:
And yet it is stuck on the boot logo? Well that thing about the paperweight seems to be right now
Click to expand...
Click to collapse
friend told me to try a full wipe rom.is it a good idea?if it is,i just wanna know if it is flashable via odin.

Look haven't you wiped data before flashing ROMs? And yes any full wipe ROM with a .tar file is flashable via odin. But a full wipe ROM is of no use if you wipe data and cache before a flash, it's the same.

Varad297 said:
Look haven't you wiped data before flashing ROMs? And yes any full wipe ROM with a .tar file is flashable via odin. But a full wipe ROM is of no use if you wipe data and cache before a flash, it's the same.
Click to expand...
Click to collapse
no i havent wiped anything.i got the phone in this condition.i can only enter download mode.when i try to enter recovery mode the phone stucks at logo.same thing if i just try to turn it on.

Yes try a full wipe ROM then, no harm in trying...

tried the wipe ROM.still no luck
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXKL8_CL840182_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXKL8_REV_05_CL1089796.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXAKL8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> Sbl.bin
<ID:0/008> param.lfs
<ID:0/008> zImage
<ID:0/008> factoryfs.img
<ID:0/008> data.img
<ID:0/008> cache.img
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008> Receive Response form LOKE
<ID:0/008> cache.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!

still under warranty?

Get to the service center...that's the only way i see out of this...

treacherous_hawk said:
still under warranty?
Click to expand...
Click to collapse
no,warranty is expired
Varad297 said:
Get to the service center...that's the only way i see out of this...
Click to expand...
Click to collapse
thanks a lot everybody for trying

brick n7000

Hi
Need some help.
I had sweet rom 11 on my samsung galaxy note n7000. wanted to try cyanogenmod. wasent happy with it. wanted to go back to sweetrom.
So I used odin 3 1.85. (have installed usb drivers). to unroot my n7000 and come back to stock jelly bean by putting the .tar stock file in PDA. And wanted from there to root + cmw and then flash sweetrom again.
But when I used odin and flashed stock jelly bean it went into bootloop. tried to wipe cache(could not find wipe dalvik i stock menu) and reboot but not sucsess. Now it only show " Samsung Galaxy Note gt-n7000" logo. Tried to flash another time but stil bootloop again
On odin it says pass and this is what the odlin log said: se below
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT5_N7000XXLT3_N7000NEELT2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> cache.img
<ID:0/005> NAND Write Start!!
<ID:0/005> factoryfs.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> zImage
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
What do I do now. Hope somebody can help me. I have only flashed sweetrom and cyonogenmod based on android 4.2.2
saw just a youtube video which used 3 files pda phone and csc when repairing soft brick. But dont know where to find them. the downloadlink in the Youtube video does not work
https://www.youtube.com/watch?v=FKrNb2q5HFM
Help much appreaceted !

Boot into recovery and do wipe data/ factory reset
Sent from my GT-N7000 using Tapatalk 2

Resolved
forest1971 said:
Boot into recovery and do wipe data/ factory reset
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thanks mate for quick response
Just saw a video with zedomax. he said to wipe cache and dalvik. that did not work. Just read that i could wipe data reset and woala!
But Youre response was much appreaceted
Thanks alot
Everything works now

Btw, your way of changing rom is too complicated. The best way is to use custom recovery to wipe cache and data and then just flash the custom rom.zip. no need to use odin.
Sent from my GT-N7000 using Tapatalk 2

[Q] Hard Bricked my s3 mini gti8190

Well i hard bricked my phone I think? I tryed to use the s5 styled rom stock Virginty V14 and I updated to the latest version of the baseband anr6 or something because that was in the rom setup while in twrp 2.7.1.0, I was on a pacman 4.4.4 custom rom before that, and I think it changed my normal bootlogo screen to i890t? instead of i890. I cannot boot into recovery anymore, ive tryed flashing over cyanogenmod 11 from novafusion, but nothing, ive tryed to flash recoverys, and nothing just a bootloop, this is the first time i've ever had this problem and I was just wondering how I fix it and if it can be fixed, I can still get into odin mode if theres a file or anything for download to fix this? I'm not sure why it did this, just need my phone back asap, any help would be appreciated

As you can get Odin to work, install original firmware from sammobile
http://www.sammobile.com/firmwares/
Sent from my GT-I8190N running SlimKat

Already tryed that, no luck, tryed to change the param folder too idk what to do

look here.
Put battery out and in.
Download laFleur ROM, boot into download-mode and flash it.
After that, flash custom recovery like TWRP from Android-Andi.
After that flash any custom ROM you like.
HTH

tryed it man, no luck again, like after i flashed that param.sfl file, it started to like show like a kind of broken screen kinda thing everytime i try to boot my phone up or boot into recovery, obviously the buttons still work, I really need to have a talk to the dev but since i cant post on the thread I was hoping someone could ask for me? edit: I think my download mode isnt working either because it says all this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I8190XXAMA2_809600_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_QXE_I8190QXEAMA1_20130109.163004_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> STE_boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> STE_boot1.img
<ID:0/003> STE_boot2.img
<ID:0/003> ipl.bin
<ID:0/003> modem.bin
<ID:0/003> ssgtest.img
<ID:0/003> normal.bin
<ID:0/003> normal2.bin
<ID:0/003> param.lfs
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
-------------------<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)--------------------- <-- this line shows up after the phone reboots, and it just keeps in a bootloop after its all flashed and then like a minute or two later these lines show up, but my phones not even connected, just a constant ugly screen bootloop... help.

So it seems I was flashing the wrong region country firmware its working again thanks was hard to find the new Zealand firmware haha, now my first splash boot is still like a TV do I flash the param.LFS file for gt-i8190t model and will I have to fresh install the stock firmware again?

imvyzel said:
So it seems I was flashing the wrong region country firmware its working again thanks was hard to find the new Zealand firmware haha, now my first splash boot is still like a TV do I flash the param.LFS file for gt-i8190t model and will I have to fresh install the stock firmware again?
Click to expand...
Click to collapse
So instead of getting the Gt-I8190 and samsung boot image and animation you have some buzz image like a tv, do this go to novafusion .pl I can't post links yet <.< s3 Mini--> Extras --> Original Boot logo download the correct one for your device, you have to install this via TWRP it should fix it

STRATOS99KINGZ said:
So instead of getting the Gt-I8190 and samsung boot image and animation you have some buzz image like a tv, do this go to novafusion .pl I can't post links yet <.< s3 Mini--> Extras --> Original Boot logo download the correct one for your device, you have to install this via TWRP it should fix it
Click to expand...
Click to collapse
You may have to flash it a couple of times if it doesn't work the first time
Sent from my GT-I8190N running SlimKat

Install the original firmware. If that doesn't work, using Odin install clockworkmod recovery and then install cm11.... Once you install cwm recovery remember to format the media and data!!
Sent from my GT-I8190 using XDA Free mobile app