Database Develop

stuck at samsung galaxy note n-7000

after i wrongly flshed criskelo rom(isntantly flashed rom in cmw whit out anything i forgoted ) my phone can't boot!
stuck at samsung galaxy notetryed every rom and...
after wrongly..! i followed root galaxy note .com steps exactly
event can't boot whit parandroid rom that i did tryed befor that!
trying too unroot to STOCK GB whit ODIN http://rootgalaxynote.com/galaxy-note-unroot/how-to-unroot-galaxy-note-gt-n7000/

kamranhaghighi said:
after i wrongly flshed criskelo rom(isntantly flashed rom in cmw whit out anything i forgoted ) my phone can't boot!
stuck at samsung galaxy notetryed every rom and...
after wrongly..! i followed root galaxy note .com steps exactly
event can't boot whit parandroid rom that i did tryed befor that!
trying too unroot to STOCK GB whit ODIN http://rootgalaxynote.com/galaxy-note-unroot/how-to-unroot-galaxy-note-gt-n7000/
Click to expand...
Click to collapse
Flash gb rom by using PC ODIN. After flashing gb rom go to recovery and wipe data and cache. Try this method.

ty but can u give me a link? i jsut founded this http://forum.xda-developers.com/showthread.php?t=1424997
i can't download but i did 1 time and can't pause and download speed is 2kb/s:| its 3:50 am and i jsut waiting for linK plz somone give me one tomarow i most go for my wimax because it had delay for 8 days and still waiting

any GB/\ ROM? i tryed a rocket rom GB from CWM but still stuck anyway im download ODIN version and waiting to download!
or stock?

kamranhaghighi said:
any GB/\ ROM? i tryed a rocket rom GB from CWM but still stuck anyway im download ODIN version and waiting to download!
or stock?
Click to expand...
Click to collapse
You must flash stock GB rom only, using odin.

jeetu1981 said:
You must flash stock GB rom only, using odin.
Click to expand...
Click to collapse
+1, yes PC ODIN only
Dont flash ics rom and do the wiping in data, it will hardbrick your phone. WARNING DONT WIPE IN ICS RECOVERY DATA OR FACTOCRY RESET OR DO NANDROID IT WILL SUPERBRICK YOUR PHONE.o

ok can u give me a link plz fast! and superbrick is unfixable?

kamranhaghighi said:
ok can u give me a link plz fast! and superbrick is unfixable?
Click to expand...
Click to collapse
This link might be helpful....its a pre rooted gb rom thread, can b used in pc odin....
All d best...!!!:good::good::good:
XDA Thread:
http://forum.xda-developers.com/showthread.php?t=1535025

thanks downloading no wipe

GOD WHY? all links are from hotfile ;( unluky badly unluky

this http://forum.xda-developers.com/showpost.php?p=25289773&postcount=207 saved me
i'm following this video now whit my 4-10kb/s net speed:| it takes 1h to load i can't wait for my wimax!
http://www.youtube.com/watch?v=ehXcnqntsro

afte that i see someting like isntalling updates than it stuck at galaxy note n7000 again
can i return my phone? some 1 help me plz

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000XXLA6.tar.md5 is valid.
<OSM> MODEM.tar.md5 is valid.
<OSM> CSC_N7000XEULA1_XEU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> hidden.img
<ID:0/003> zImage
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response form LOKE
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
thats log but still stuck at samsung galaxy note n-700 logo
PLZ i wont lose my 1300$ expancive device

kamranhaghighi said:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000XXLA6.tar.md5 is valid.
<OSM> MODEM.tar.md5 is valid.
<OSM> CSC_N7000XEULA1_XEU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> hidden.img
<ID:0/003> zImage
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response form LOKE
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
thats log but still stuck at samsung galaxy note n-700 logo
PLZ i wont lose my 1300$ expancive device
Click to expand...
Click to collapse
Stuck at Samsung logo is normal if you flash GB rom over ICS, just go to recovery (vol up+ home + power) and perform wipe and reboot.
As you are on Gingerbread now, it is safe to perform full wipe in stock recovery.

jeetu1981 said:
Stuck at Samsung logo is normal if you flash GB rom over ICS, just go to recovery (vol up+ home + power) and perform wipe and reboot.
Click to expand...
Click to collapse
This will solve your issue
Sent from my GT-N7000 using xda premium

THANKS REALLY but if not work can i pm u?^_^

did a wipedata/factory reset in stock recovery but still stuck at samsung galaxy note GT-N7000

kamranhaghighi said:
did a wipedata/factory reset in stock recovery but still stuck at samsung galaxy note GT-N7000
Click to expand...
Click to collapse
replied to your pm, please check it.

and one mroe thing
i did this! Nandroid Backup and Restore:
You are able to do Full Nandroid Backups on CF-Root Kernel. But you have to restore them using Abyss Kernel 4.2!!!
If you try to Restore with CF-Root, your Restore will hang up and you will at least lose Root
(befor lfashing GB whit odin!

waiting to recive ur repalay! it takes long time whit irans net:S

Can anyone help me out, Recovery mode not working, Download mode working

i have once rooted my N7000 after using for few months, i returned to original Jellybean OS
"""N7000DDLSC_N7000ODDLSC_N7000DDLS6_HOME.tar"""
But now my phone is not working ""No Recovery mode, only download mode""
tried to flash a ""TWRP CWM---PhilZ-cwm6-DDLSC-ODD-5.06.1.tar,,
&,,CF-Root-SGN_XX_OXA_LPY-v5.3-CWM5"" but both failed via ""Odin_v3.04""
now i am middle of nowhere, only samsung logo & an yellow triangle.
Tried to flash original Jellybean OS several times,
""" Custom binary count is (6):crying:
Odin Dispaly this message
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLSC_N7000ODDLSC_N7000DDLS6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> factoryfs.img
<ID:0/007> NAND Write Start!!
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Read almost everything, tried everything one thing came across (emmc bug ????), dont want to hard brick my phone, kindly suggest me something to do with my phone,,
plz help me

Kill all kies procesess using task manager if running in the back ground. Use main usb ports, original USB cable.. Try again to flash the Philz kernel using odin 1.85.. If that fails try a different pc. Install the samsung USB driver using this

Thanks for reply Buddy, can you plzz guide me the exact or specific philZ kernel + recovery to flash via odin 1.85...:crying:
i have already tried most of it,,, which i used earlier for rooting my phone....

erosnyx said:
Thanks for reply Buddy, can you plzz guide me the exact or specific philZ kernel + recovery to flash via odin 1.85...:crying:
i have already tried most of it,,, which i used earlier for rooting my phone....
Click to expand...
Click to collapse
Go to Philz kernel thread for n7000 and read the 3rd post.. Links are there.. Try the xxlta version..

Can't Unroot Note 4 5.1.1 using ODin

For the past couple of days I've been unable to unroot my device using Odin, which I have done many of times on the past. I went to Sammobile and got the latest firmware to flash back to stock, but everytime I attempt to do so the process Fails. USB Debugging is enabled so I don't have a clue what the problem could be. I will list some general information as well as the results of the Odin process below:
Baseband Version: N910TUVUD0K2
Odin process result:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910T3UVU1DOK2_N910T3TMB1DOK2_N910T3UVU1DOK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks
Updated: I've stumbled across a thread here on XDA which has a mirror link to Stock TW Firmware/Bootloader/Modem N910TUVU2DOK2, and after flashing this mirror link using Odin... my phone now is unrooted and back to stock. Many thanks to ShrekOpher for posting the mirror link and here is a link to his post: http://forum.xda-developers.com/note-4-tmobile/development/mirror-stock-tw-t3260858

Same issue
I just posted about this same issue a couple of days ago, if you go to my only post ive done so far you can see how we are in the same boat. What were you using before you got to your problem, which custom ROM?

I had this problem on the note edge. What helped me was flashing cwm recovery and wiping everything

Trebor313 said:
For the past couple of days I've been unable to unroot my device using Odin, which I have done many of times on the past. I went to Sammobile and got the latest firmware to flash back to stock, but everytime I attempt to do so the process Fails. USB Debugging is enabled so I don't have a clue what the problem could be. I will list some general information as well as the results of the Odin process below:
Baseband Version: N910TUVUD0K2
Odin process result:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910T3UVU1DOK2_N910T3TMB1DOK2_N910T3UVU1DOK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks
Click to expand...
Click to collapse
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...

Catfish197621 said:
I just posted about this same issue a couple of days ago, if you go to my only post ive done so far you can see how we are in the same boat. What were you using before you got to your problem, which custom ROM?
Click to expand...
Click to collapse
I'm currently using [DOK2] TEKXodus HYBRID N4 URv7

mdiaz33685 said:
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...
Click to expand...
Click to collapse
I check and made sure that the reactivation lock was disabled, but it still didn't work. I guess I will keep an eye open to see if this issue can get resolved sometime in the near future

mdiaz33685 said:
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...
Click to expand...
Click to collapse
What are the odin settings for doing this install? I can't get it to recognize the file
Nevermind, quick google showed i should extract the file which im not used to doing for roms and use "AP"

waywardfrantz said:
What are the odin settings for doing this install? I can't get it to recognize the file
Nevermind, quick google showed i should extract the file which im not used to doing for roms and use "AP"
Click to expand...
Click to collapse
U have to unziip the firmware and in Odin u need to goto AP and point to the firmware... sometimes i have to remove the extention .md5 after u unzip the firmware depending on which Odin u use...
make sure u have the samsung drivers installed..

mdiaz33685 said:
U have to unziip the firmware and in Odin u need to goto AP and point to the firmware... sometimes i have to remove the extention .md5 after u unzip the firmware depending on which Odin u use...
make sure u have the samsung drivers installed..
Click to expand...
Click to collapse
I can't Odin to stock unless I change the name of the firmware file to .tar. it skips the md5 check I believe.
---------- Post added at 06:17 PM ---------- Previous post was at 06:14 PM ----------
Also go to supersu and do a full unroot before. I'm thinking maybe the supersu backup script could cause issues too

Freezing on the splash screen logo

Hello, I have a big problem with my I9305, which had stock rom 4.4.4 XEO and root. The phone has been resetting on its own from time to time. Now the phone is dead, it freezes on the splash screen logo. Installing new room via Odin and DM doesn't work:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
In recovery menu there is message:
failed to mount /cache
Can't mount /cache/recovery/last_recovery
failed to mount /system
end so on...
Click to expand...
Click to collapse
What should I do?

Siadulinho said:
Hello, I have a big problem with my I9305, which had stock rom 4.4.4 XEO and root. The phone has been resetting on its own from time to time. Now the phone is dead, it freezes on the splash screen logo. Installing new room via Odin and DM doesn't work:
In recovery menu there is message:
What should I do?
Click to expand...
Click to collapse
Might be a corrupt nand, if that so, you will need to replace the board...sorry for bad news, maybe other member can have a different opinion.

Any options to make backup of SMS?

Siadulinho said:
Any options to make backup of SMS?
Click to expand...
Click to collapse
I don't think so, a corrupt NAND corrupts it all, i don't think you can boot anything on the phone anymore, however, a user here in XDA was able to use a memory card as a complete NAND and he even flashed a ROM and booted fine,but he was a skilled one, i don't know how he did it.
But he lost all data of course, so even if you did what he did, you won't get your SMSs.

Note 8 Stuck on : Samsung Galaxy Note 8 powered by android screen

Hi I'm new to XDA. My Note 8 (N950U) won't boot past the Samsung Galaxy Note 8 powered by android screen.
I can access the download mode and have flashed the stock firmware. But as soon as it reboots it gets stuck on the same screen.
Any help regarding this is much appreciated

factory reset.

android-incredible said:
factory reset.
Click to expand...
Click to collapse
I cant enter the recovery to perform a factory reset

RPG-XDA said:
I cant enter the recovery to perform a factory reset
Click to expand...
Click to collapse
Flash all 4 files in Odin instead of using home-csc file use CSC file. This will erase phone. Also make sure your on the latest Odin and using the same bootloader version.
Sent from my SM-N950F using Tapatalk

BluePhnx said:
Flash all 4 files in Odin instead of using home-csc file use CSC file. This will erase phone. Also make sure your on the latest Odin and using the same bootloader version.
Sent from my SM-N950F using Tapatalk
Click to expand...
Click to collapse
I already tried flashing both the HOME_CSC and CSC separately, but it didn't work. I'm able to successfully flash the firmware, but the phone is still stuck at the powered by android screen.

Do you know what caused the issue in the first place? Was it just on stock and suddenly won't boot? Were you using Samfail or anything like that? Just trying to narrow down the issue, because flashing stock should usually work.

sefrcoko said:
Do you know what caused the issue in the first place? Was it just on stock and suddenly won't boot? Were you using Samfail or anything like that? Just trying to narrow down the issue, because flashing stock should usually work.
Click to expand...
Click to collapse
Yes, I was on stock Oreo. Haven't tried rooting it or installing custom recovery. I came across some posts on the S8 forum with the same issue, but the solution mentioned there isn't working for me.
https://forum.xda-developers.com/galaxy-s8/help/galaxy-s8-g950fd-stuck-logo-flash-t3647926

RPG-XDA said:
Yes, I was on stock Oreo. Haven't tried rooting it or installing custom recovery. I came across some posts on the S8 forum with the same issue, but the solution mentioned there isn't working for me.
https://forum.xda-developers.com/galaxy-s8/help/galaxy-s8-g950fd-stuck-logo-flash-t3647926
Click to expand...
Click to collapse
Which Odin version are you using?

sefrcoko said:
Which Odin version are you using?
Click to expand...
Click to collapse
Odin 3 v3.13.1

RPG-XDA said:
Odin 3 v3.13.1
Click to expand...
Click to collapse
Possible to show a screenshot of Odin after the flash? To see the log messages and firmware version being flashed?

sefrcoko said:
Possible to show a screenshot of Odin after the flash? To see the log messages and firmware version being flashed?
Click to expand...
Click to collapse
Firmware version: N950U1UES5CRF6_N950U1OYM5CRF6_ATT
Odin log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 6197 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> bksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> tz.mbn
<ID:0/003> hyp.mbn
<ID:0/003> devcfg.mbn
<ID:0/003> pmic.elf
<ID:0/003> rpm.mbn
<ID:0/003> cmnlib.mbn
<ID:0/003> cmnlib64.mbn
<ID:0/003> keymaster.mbn
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> sec.dat
<ID:0/003> NON-HLOS.bin
<ID:0/003> storsec.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> persist.img.ext4
<ID:0/003> dqmdbg.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> adspso.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img.ext4
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

Still stuck at the same boot screen. Still wondering why the Odin flash is successful, but the phone doesn't seem to even have a recovery to boot into.

RPG-XDA said:
Still stuck at the same boot screen. Still wondering why the Odin flash is successful, but the phone doesn't seem to even have a recovery to boot into.
Click to expand...
Click to collapse
Use USB 2.0,Also try unplugging it mid flash, Then reboot the phone, Does it boot to the screen where it tells you to connect with Smartswitch?

Samsunguser932 said:
Use USB 2.0,Also try unplugging it mid flash, Then reboot the phone, Does it boot to the screen where it tells you to connect with Smartswitch?
Click to expand...
Click to collapse
I tried your suggestion and I now get the screen which tells me to connect to smart switch. But when I run Smart Switch, it says the connected device cannot be recognized and Emergency recovery mode doesn't list the phone

RPG-XDA said:
I tried your suggestion and I now get the screen which tells me to connect to smart switch. But when I run Smart Switch, it says the connected device cannot be recognized and Emergency recovery mode doesn't list the phone
Click to expand...
Click to collapse
Okay, Just use ODIN then to try and restore it from that screen, Maybe that will work, Also try Smartswitch from Download mode, Make sure your drivers are installed.

Samsunguser932 said:
Okay, Just use ODIN then to try and restore it from that screen, Maybe that will work, Also try Smartswitch from Download mode, Make sure your drivers are installed.
Click to expand...
Click to collapse
I have installed all my drivers, but Smartswitch still won't detect my device. After flashing with Odin it goes back to being stuck on the Powered by android screen.

RPG-XDA said:
I have installed all my drivers, but Smartswitch still won't detect my device. After flashing with Odin it goes back to being stuck on the Powered by android screen.
Click to expand...
Click to collapse
When you flash with odin select Nand Erase from your options. then youll be able to boot if you flash WITH the AP,BL,CP and CSC

me2151 said:
When you flash with odin select Nand Erase from your options. then youll be able to boot if you flash WITH the AP,BL,CP and CSC
Click to expand...
Click to collapse
I tried using the Nand Erase option as you suggested, but it didn't change anything. I was just trying various button combinations and suddenly got the grey circle with the lightning bolt, but it wasn't charging. After some time the phone turned off and I haven't been able to get to that screen again. Any idea of what that could be?

Thats just the off mode charging(also known as low power mode)

me2151 said:
Thats just the off mode charging(also known as low power mode)
Click to expand...
Click to collapse
Oh. Didn't know that But even in that mode the phone just shows that symbol, even after I disconnect it from power.
Could this be a issue with the motherboard or is it just software, because I can still get into download mode and flash successfully?