For the past couple of days I've been unable to unroot my device using Odin, which I have done many of times on the past. I went to Sammobile and got the latest firmware to flash back to stock, but everytime I attempt to do so the process Fails. USB Debugging is enabled so I don't have a clue what the problem could be. I will list some general information as well as the results of the Odin process below:
Baseband Version: N910TUVUD0K2
Odin process result:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910T3UVU1DOK2_N910T3TMB1DOK2_N910T3UVU1DOK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks
Updated: I've stumbled across a thread here on XDA which has a mirror link to Stock TW Firmware/Bootloader/Modem N910TUVU2DOK2, and after flashing this mirror link using Odin... my phone now is unrooted and back to stock. Many thanks to ShrekOpher for posting the mirror link and here is a link to his post: http://forum.xda-developers.com/note-4-tmobile/development/mirror-stock-tw-t3260858
Same issue
I just posted about this same issue a couple of days ago, if you go to my only post ive done so far you can see how we are in the same boat. What were you using before you got to your problem, which custom ROM?
I had this problem on the note edge. What helped me was flashing cwm recovery and wiping everything
Trebor313 said:
For the past couple of days I've been unable to unroot my device using Odin, which I have done many of times on the past. I went to Sammobile and got the latest firmware to flash back to stock, but everytime I attempt to do so the process Fails. USB Debugging is enabled so I don't have a clue what the problem could be. I will list some general information as well as the results of the Odin process below:
Baseband Version: N910TUVUD0K2
Odin process result:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910T3UVU1DOK2_N910T3TMB1DOK2_N910T3UVU1DOK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks
Click to expand...
Click to collapse
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...
Catfish197621 said:
I just posted about this same issue a couple of days ago, if you go to my only post ive done so far you can see how we are in the same boat. What were you using before you got to your problem, which custom ROM?
Click to expand...
Click to collapse
I'm currently using [DOK2] TEKXodus HYBRID N4 URv7
mdiaz33685 said:
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...
Click to expand...
Click to collapse
I check and made sure that the reactivation lock was disabled, but it still didn't work. I guess I will keep an eye open to see if this issue can get resolved sometime in the near future
mdiaz33685 said:
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...
Click to expand...
Click to collapse
What are the odin settings for doing this install? I can't get it to recognize the file
Nevermind, quick google showed i should extract the file which im not used to doing for roms and use "AP"
waywardfrantz said:
What are the odin settings for doing this install? I can't get it to recognize the file
Nevermind, quick google showed i should extract the file which im not used to doing for roms and use "AP"
Click to expand...
Click to collapse
U have to unziip the firmware and in Odin u need to goto AP and point to the firmware... sometimes i have to remove the extention .md5 after u unzip the firmware depending on which Odin u use...
make sure u have the samsung drivers installed..
mdiaz33685 said:
U have to unziip the firmware and in Odin u need to goto AP and point to the firmware... sometimes i have to remove the extention .md5 after u unzip the firmware depending on which Odin u use...
make sure u have the samsung drivers installed..
Click to expand...
Click to collapse
I can't Odin to stock unless I change the name of the firmware file to .tar. it skips the md5 check I believe.
---------- Post added at 06:17 PM ---------- Previous post was at 06:14 PM ----------
Also go to supersu and do a full unroot before. I'm thinking maybe the supersu backup script could cause issues too
Related
Hi all,
so i read the PSA and all the other info about bricking/ what not to load etc and took the plunge to update my kernel
Using odin, i flash the safe kernel DAFUQ_N7000_05272012.tar and everything went well and rebooted. Well this is where i'm stuck now
Reboots, i get the samsung screen with the yellow triangle now but that's it. nothing after that.
Read abit more and grab this kernel cm9_safe_kernel.tar and flash this. same thing.
I cannot get into recovery but i can get into download mode.
I read a few things about looking at repartitioning but as i didn't do a full wipe nor did a flash any roms, i don't think that is my issue.
Any suggestions?
flash a full GB firmware with ODIN and you should be fine
Once done, Root and use Triangle Away app to reset counter and remove the triangle
denti said:
Hi all,
so i read the PSA and all the other info about bricking/ what not to load etc and took the plunge to update my kernel
Using odin, i flash the safe kernel DAFUQ_N7000_05272012.tar and everything went well and rebooted. Well this is where i'm stuck now
Reboots, i get the samsung screen with the yellow triangle now but that's it. nothing after that.
Read abit more and grab this kernel cm9_safe_kernel.tar and flash this. same thing.
I cannot get into recovery but i can get into download mode.
I read a few things about looking at repartitioning but as i didn't do a full wipe nor did a flash any roms, i don't think that is my issue.
Any suggestions?
Click to expand...
Click to collapse
Try flash gb rom. http://androidadvices.com/update-galaxy-note-n7000-gingerbread-xxlc1-236-firmware/
Moved To Q&A
Please post all questions in the Q&A section
azzledazzle said:
flash a full GB firmware with ODIN and you should be fine
Once done, Root and use Triangle Away app to reset counter and remove the triangle
Click to expand...
Click to collapse
Do this....
thanks for the replies but wee confused...
isnt' DAFUQ_N7000_05272012.tar a GB firmware?
also isn't the CM9_safe_kernel.tar a GM firmware to use?
might you be able to suggest a firmware?
without going into much detail, what's the differences between the DAFUQ, CM9_safe firmware vs the GB firmware?
take care
denti said:
thanks for the replies but wee confused...
isnt' DAFUQ_N7000_05272012.tar a GB firmware?
also isn't the CM9_safe_kernel.tar a GM firmware to use?
might you be able to suggest a firmware?
without going into much detail, what's the differences between the DAFUQ, CM9_safe firmware vs the GB firmware?
take care
Click to expand...
Click to collapse
Flash Full GB STOCK ROM via PC ODIN and start again...
Also sounds a little bit like you were on ICS an have flashed a GB Kernel and rebooted....
denti said:
thanks for the replies but wee confused...
isnt' DAFUQ_N7000_05272012.tar a GB firmware?
also isn't the CM9_safe_kernel.tar a GM firmware to use?
might you be able to suggest a firmware?
without going into much detail, what's the differences between the DAFUQ, CM9_safe firmware vs the GB firmware?
take care
Click to expand...
Click to collapse
Its a kernel only.. Download full GB rom here.
http://forum.xda-developers.com/showthread.php?t=1424997
Sent from my GT-N7000 using XDA Premium App
Ok, so i downloaded N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 and tried to flash via odin and it failed
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> factoryfs.img
<ID:0/006> NAND Write Start!!
<ID:0/006> zImage
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
is the log.
any suggestions? I got firmware DAFUQ_N7000_05272012.tar
thank you
denti said:
Ok, so i downloaded N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 and tried to flash via odin and it failed
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> factoryfs.img
<ID:0/006> NAND Write Start!!
<ID:0/006> zImage
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
is the log.
any suggestions? I got firmware DAFUQ_N7000_05272012.tar
thank you
Click to expand...
Click to collapse
Read this carefully and understand. Is your device 16 gig? If yes. http://nguyenkieuhung1984.blogspot.com/2012/01/how-to-installflash-samsung-galaxy-note_09.html?m=1
Read 3C
azzledazzle said:
flash a full GB firmware with ODIN and you should be fine
Once done, Root and use Triangle Away app to reset counter and remove the triangle
Click to expand...
Click to collapse
Triangle away won't work on GB roms.
Try to reflash CF kernal using PC odin..
Fix it?
Hi,
I have downloaded the latest version of De La Vega for my AT&T Note 3. (Just FYI, I dont know if it makes a difference, but my phone did the recent AT&T update) After unzipping the folder, I ran the N900AUCUBMI9_OneClickBin.exe file and got this message on the application:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> One Click Downloader Mode
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003>
<ID:0/003>
<OSM> All threads completed. (succeed 0 / failed 1)
Also, I noticed on my phone that in ODIN Mode that it says "SW REV CHECK FAIL Fused 2 > Binary 1. In order to restart my phone, I have to pull out the battery. I have tried Kingo without any success. I would love to root my phone and also install BobCat Rom but I dont understand why I cant root my phone. Any help is appreciated.
shamlyn said:
Hi,
I have downloaded the latest version of De La Vega for my AT&T Note 3. (Just FYI, I dont know if it makes a difference, but my phone did the recent AT&T update) After unzipping the folder, I ran the N900AUCUBMI9_OneClickBin.exe file and got this message on the application:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> One Click Downloader Mode
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003>
<ID:0/003>
<OSM> All threads completed. (succeed 0 / failed 1)
Also, I noticed on my phone that in ODIN Mode that it says "SW REV CHECK FAIL Fused 2 > Binary 1. In order to restart my phone, I have to pull out the battery. I have tried Kingo without any success. I would love to root my phone and also install BobCat Rom but I dont understand why I cant root my phone. Any help is appreciated.
Click to expand...
Click to collapse
You cannot odin mi9 over mj5 you will end up with mi9 rom and mj5 bootloaders which will give you problems. If you have already done this you can flash the pit file only and possibly save yourself however this hasnt worked for everyone. Search the forum there is a thread with the pit file available. Kingo will root your phone but by trying to dowmgrade you have other issues to fix first. The bootloadera do not allow themself to be downgraded
---------- Post added at 06:48 PM ---------- Previous post was at 06:47 PM ----------
Also idk what you are thinking but we do not hqve any custom roms or recovery available for the att note 3 yet due to the locked bootloaders and other security methods used by att
I lost root after update but I just went to recovery mode did a factory reset and supersu was in my system apps. So I went to unknown sources and turned on went back to supersu and it works I have full root. I installed several apps that require root access and they installed fine and everything works perfect
khoury1 said:
I lost root after update but I just went to recovery mode did a factory reset and supersu was in my system apps. So I went to unknown sources and turned on went back to supersu and it works I have full root. I installed several apps that require root access and they installed fine and everything works perfect
Click to expand...
Click to collapse
Is there an easier solution which does not require a factory wipe?
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Not that I know of
Kingo work fine for me after the update. What version of Kingo are you using?
I didn't use kingo...I tried but it keep failing
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Must use Odin v3.10.6
Neostatic17 said:
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Click to expand...
Click to collapse
wp4jot said:
Must use Odin v3.10.6
Click to expand...
Click to collapse
Hi wp4jot,
i have used odin 3.10.6 but it still don't work do you have an idea why its not working , or how can i solve this problem
Thanks
I don't. Did you flash all 4 files at once?
Neostatic17 said:
Hi wp4jot,
i have used odin 3.10.6 but it still don't work do you have an idea why its not working , or how can i solve this problem
Thanks
Click to expand...
Click to collapse
I had this problem.. You must have v3.10.6 and flash every file in the corresponding place, after that I still got a fail message but I tried un-checking the auto reboot option and that did the trick (this will make the phone stay in download mode even after you complete the flash, to quit download mode you must press the volume down button and the power button at the same time for about 10 seconds) hope that helps, let me know.
vontokkerths said:
I had this problem.. You must have v3.10.6 and flash every file in the corresponding place, after that I still got a fail message but I tried un-checking the auto reboot option and that did the trick (this will make the phone stay in download mode even after you complete the flash, to quit download mode you must press the volume down button and the power button at the same time for about 10 seconds) hope that helps, let me know.
Click to expand...
Click to collapse
I Have the same problem with S6- SMG20T (Dutch) Now trying to un-check the auto reboot otion. Hope it works for me.
didn't worked for me
wp4jot said:
I don't. Did you flash all 4 files at once?
Click to expand...
Click to collapse
What do you mean with that? witch 4 files?
Hope you can help me.
After a factory swipe and installing vodafone wallet on my S6 it says that it doesn't work on a rooted Phone
You have to put each file in the corresponding place, when you download the stock rom after you've extracted the zip you're supposed to have a file called AP, BL, CSC, AND the other which I cannot remember, those are the files you're supposed to flash, if you try to flash just AP like on the screenshot it's not going to work.
Neostatic17 said:
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Click to expand...
Click to collapse
I think you downloaded the wrong firmware for your phone, your phone is G920F and the firmware you are trying to flash is G925F.
@Neostatic17, it looks like you downloaded the wrong file. The file should be a tar.zip, not tar.md5. Once you download the correct tar.zip, extract the file and you will see 4 files within the one file you downloaded. Then flash all 4 files with odin.
Edit...Ok, I've checked my pc and the file is a tar.zip before you extract it and once it's extracted, there are 4 tar.md5 files. All you have to do is put the AP file in the AP slot, BL file in the BL slot and so on. I leave auto reboot checked, but that is up to you.
Hi
My S6 is in loop reboot after i edit the build.prop... I have the original build.prop on my pc but how to restore it ??? Please help!
master-i said:
Hi
My S6 is in loop reboot after i edit the build.prop... I have the original build.prop on my pc but how to restore it ??? Please help!
Click to expand...
Click to collapse
If you have TWRP installed, you can just ADB the file over. Easy.
If you only rooted and want to preserve your KNOX flag, you need to ODIN back to stock and then re-root. It's not destructive, so it's not nearly as bad as it sounds
I don't have twrp for now but can i Install it on download mode ? I just tried to install it and it stop on Start upload (on odin)
Follow these instructions. Download ODIN from that link too
http://forum.xda-developers.com/tmo...irmware-sm-g920t-firmware-odin-guide-t3077706
Do i lose my data? and where Can I find the [Unified Driver Installer] on step 2?
No you won't lose your data at all, you will lose root, but all you need to do is re-root the phone.
http://developer.samsung.com/technical-doc/view.do?v=T000000117
I think it's easier to flash only the build.prop no? is it possible?
Thanx to help me bro!
No at this point, IMO, this is the easiest way to get you back to where you were. I assume you're on the stock ROM just rooted.
Yes, I were on the stock room just rooted by PingPong. Hope it will not make my phone slower or make it crash more often... :/
Yeah just ODIN back to stock, then re-root using PingPong, it's really not as bad as it sounds. All of your apps and user data including all settings will still be there.
@se1000
Please look this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Have you had your phone in download mode for a while? If so, try rebooting the phone
se1000 said:
Have you had your phone in download mode for a while? If so, try rebooting the phone
Click to expand...
Click to collapse
Of course I just retried again same error... I can't understand because I see the 0:COM3 on Odin...
Are you using the ODIN from the link? I had problems with other versions
se1000 said:
Are you using the ODIN from the link? I had problems with other versions
Click to expand...
Click to collapse
Yes the V3.10
Were you trying to run ADB earlier? Try rebooting the PC
I closed and reopen Ondin on Administrator and now it's blocked with: <ID:0/003> SetupConnection..
Try a different USB cable or different USB port. Seems ODIN can get a bit finicky
I rebooted PC and my Phone and unplugged and still the same
maybe it's because i tried to install twrp?
Shouldn't matter, as long as you're in download mode and ODIN shows light blue it should work
So somehow I've managed to delete my OS on my note 5 model N9208. I've downloaded the correct firmware (i think) from sammob but when I try and flash it with Odin, Odin just crashes. I have tried putting the ROM onto a USB to MicroUSB but TWRP isn't picking up the stick.
Help please :crying:
EDIT:
Odin just come back with this
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can anybody help me please? Or just tell me if I am downloading the right ROM?
Download Samsung Smart Switch and use it. It will work and there will be no guessing which firmware you need.
CodeNameRedNeck said:
Download Samsung Smart Switch and use it. It will work and there will be no guessing which firmware you need.
Click to expand...
Click to collapse
Smart switch doesn't recognise my device, my phone doesn't get past the screen where it states it's a Note 5.
Just adb sideloaded Nameless custom rom and I've managed to get it to go to the Samsung splashscreen but won't go any further. Not sure on what to do now.
Managed to get it sorted by sideloading a custom ROM with TWRP and left it on the Samsung splashscreen for a bit. To say I only got my first ever android phone on Tuesday I am proud of myself!
/thread.
inxy said:
Managed to get it sorted by sideloading a custom ROM with TWRP and left it on the Samsung splashscreen for a bit. To say I only got my first ever android phone on Tuesday I am proud of myself!
/thread.
Click to expand...
Click to collapse
Dear Sir.
You Should Be Proud.
I am In The Same Boat As Your's.
Kindly Provide Me With PIT File.
I will be grateful.
And Have You Succeeded In Getting ODIN to Flash?
Regards
Its not a PIT File. He sideloaded a ZIP through TWRP.
fkofilee said:
Its not a PIT File. He sideloaded a ZIP through TWRP.
Click to expand...
Click to collapse
I Know That
But I want a PIT file
If He can help Me with That I will be gRateful