Hi,
I have downloaded the latest version of De La Vega for my AT&T Note 3. (Just FYI, I dont know if it makes a difference, but my phone did the recent AT&T update) After unzipping the folder, I ran the N900AUCUBMI9_OneClickBin.exe file and got this message on the application:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> One Click Downloader Mode
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003>
<ID:0/003>
<OSM> All threads completed. (succeed 0 / failed 1)
Also, I noticed on my phone that in ODIN Mode that it says "SW REV CHECK FAIL Fused 2 > Binary 1. In order to restart my phone, I have to pull out the battery. I have tried Kingo without any success. I would love to root my phone and also install BobCat Rom but I dont understand why I cant root my phone. Any help is appreciated.
shamlyn said:
Hi,
I have downloaded the latest version of De La Vega for my AT&T Note 3. (Just FYI, I dont know if it makes a difference, but my phone did the recent AT&T update) After unzipping the folder, I ran the N900AUCUBMI9_OneClickBin.exe file and got this message on the application:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> One Click Downloader Mode
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003>
<ID:0/003>
<OSM> All threads completed. (succeed 0 / failed 1)
Also, I noticed on my phone that in ODIN Mode that it says "SW REV CHECK FAIL Fused 2 > Binary 1. In order to restart my phone, I have to pull out the battery. I have tried Kingo without any success. I would love to root my phone and also install BobCat Rom but I dont understand why I cant root my phone. Any help is appreciated.
Click to expand...
Click to collapse
You cannot odin mi9 over mj5 you will end up with mi9 rom and mj5 bootloaders which will give you problems. If you have already done this you can flash the pit file only and possibly save yourself however this hasnt worked for everyone. Search the forum there is a thread with the pit file available. Kingo will root your phone but by trying to dowmgrade you have other issues to fix first. The bootloadera do not allow themself to be downgraded
---------- Post added at 06:48 PM ---------- Previous post was at 06:47 PM ----------
Also idk what you are thinking but we do not hqve any custom roms or recovery available for the att note 3 yet due to the locked bootloaders and other security methods used by att
I lost root after update but I just went to recovery mode did a factory reset and supersu was in my system apps. So I went to unknown sources and turned on went back to supersu and it works I have full root. I installed several apps that require root access and they installed fine and everything works perfect
khoury1 said:
I lost root after update but I just went to recovery mode did a factory reset and supersu was in my system apps. So I went to unknown sources and turned on went back to supersu and it works I have full root. I installed several apps that require root access and they installed fine and everything works perfect
Click to expand...
Click to collapse
Is there an easier solution which does not require a factory wipe?
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Not that I know of
Kingo work fine for me after the update. What version of Kingo are you using?
I didn't use kingo...I tried but it keep failing
Related
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Must use Odin v3.10.6
Neostatic17 said:
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Click to expand...
Click to collapse
wp4jot said:
Must use Odin v3.10.6
Click to expand...
Click to collapse
Hi wp4jot,
i have used odin 3.10.6 but it still don't work do you have an idea why its not working , or how can i solve this problem
Thanks
I don't. Did you flash all 4 files at once?
Neostatic17 said:
Hi wp4jot,
i have used odin 3.10.6 but it still don't work do you have an idea why its not working , or how can i solve this problem
Thanks
Click to expand...
Click to collapse
I had this problem.. You must have v3.10.6 and flash every file in the corresponding place, after that I still got a fail message but I tried un-checking the auto reboot option and that did the trick (this will make the phone stay in download mode even after you complete the flash, to quit download mode you must press the volume down button and the power button at the same time for about 10 seconds) hope that helps, let me know.
vontokkerths said:
I had this problem.. You must have v3.10.6 and flash every file in the corresponding place, after that I still got a fail message but I tried un-checking the auto reboot option and that did the trick (this will make the phone stay in download mode even after you complete the flash, to quit download mode you must press the volume down button and the power button at the same time for about 10 seconds) hope that helps, let me know.
Click to expand...
Click to collapse
I Have the same problem with S6- SMG20T (Dutch) Now trying to un-check the auto reboot otion. Hope it works for me.
didn't worked for me
wp4jot said:
I don't. Did you flash all 4 files at once?
Click to expand...
Click to collapse
What do you mean with that? witch 4 files?
Hope you can help me.
After a factory swipe and installing vodafone wallet on my S6 it says that it doesn't work on a rooted Phone
You have to put each file in the corresponding place, when you download the stock rom after you've extracted the zip you're supposed to have a file called AP, BL, CSC, AND the other which I cannot remember, those are the files you're supposed to flash, if you try to flash just AP like on the screenshot it's not going to work.
Neostatic17 said:
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Click to expand...
Click to collapse
I think you downloaded the wrong firmware for your phone, your phone is G920F and the firmware you are trying to flash is G925F.
@Neostatic17, it looks like you downloaded the wrong file. The file should be a tar.zip, not tar.md5. Once you download the correct tar.zip, extract the file and you will see 4 files within the one file you downloaded. Then flash all 4 files with odin.
Edit...Ok, I've checked my pc and the file is a tar.zip before you extract it and once it's extracted, there are 4 tar.md5 files. All you have to do is put the AP file in the AP slot, BL file in the BL slot and so on. I leave auto reboot checked, but that is up to you.
Hey guys need a little help here, i just bought a motherboard for my girlfriends s5, the old one seemed to overheated and died, yeah seriously. was just sitting on the bed.
I just spent $100 to get an AT&T Mobo, cracked open the phone and installed it. (The LCD is really thin, but to my suprise is really strong)
Stock Android 5.0 L, tried to to downgrade to 4.4.4, realize i cant now because of locked bootloader. trying to just restore back to Android 5 now.
Recovery mode presents " Firmware upgrade encountered an issue, Please select recovery mode in kies"
Download mode presents " SW Rev Check Fail : [aboot] fused > 4 Binary 3 "
I suppose this is because i flashed 4.4.2 in Odin the following
AP, CP, CSC
BL was NOT flashed!
Currently tried to find BL, AP, CP and CSC for 5.0 L, figure it would solve the problem
However my google-fuu leads me no awnsers, Closest thing i could find was.
theandroidsoul dot com /att-galaxy-s5-lollipop-update-odin-firmware-80652/
looks like it will flash 5.0 software, but.
My odin fails everytime i try, I have tried this on two computers, Windows 7 & 8
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> One Click Downloader Mode
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003>
<ID:0/003>
<OSM> All threads completed. (succeed 0 / failed 1)
I really dont think its a driver issue., tried multiple cables.
Thanks
Recently I installed Clockwork Mod on my sisters Samasung Galaxy I8190N and attempted to flash lollipop on it. Much to my disappointment somewhere in the process I failed. Now when the phone boots I see the lollipop loading animation, but it goes no further during the boot. I can no longer access the Clockwork Mod recovery with up+power+home button. But can still access the download mode. So I tried to reinstall the 4.1.2 using odin, however with odin I get the following error when trying to flash using the PDA/AP:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> modem.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone (in download mode) it says Custom Modem Binary installed.
Any help in getting my sisters phone back to how it was before she gave it to me (default 4.1.2) would be greatly appreciated!
Edit: I realise after posting that this would of been better in the troubleshooting forum, apologies for that.
Factory reset or flash original firmware from sammobile
For the past couple of days I've been unable to unroot my device using Odin, which I have done many of times on the past. I went to Sammobile and got the latest firmware to flash back to stock, but everytime I attempt to do so the process Fails. USB Debugging is enabled so I don't have a clue what the problem could be. I will list some general information as well as the results of the Odin process below:
Baseband Version: N910TUVUD0K2
Odin process result:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910T3UVU1DOK2_N910T3TMB1DOK2_N910T3UVU1DOK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks
Updated: I've stumbled across a thread here on XDA which has a mirror link to Stock TW Firmware/Bootloader/Modem N910TUVU2DOK2, and after flashing this mirror link using Odin... my phone now is unrooted and back to stock. Many thanks to ShrekOpher for posting the mirror link and here is a link to his post: http://forum.xda-developers.com/note-4-tmobile/development/mirror-stock-tw-t3260858
Same issue
I just posted about this same issue a couple of days ago, if you go to my only post ive done so far you can see how we are in the same boat. What were you using before you got to your problem, which custom ROM?
I had this problem on the note edge. What helped me was flashing cwm recovery and wiping everything
Trebor313 said:
For the past couple of days I've been unable to unroot my device using Odin, which I have done many of times on the past. I went to Sammobile and got the latest firmware to flash back to stock, but everytime I attempt to do so the process Fails. USB Debugging is enabled so I don't have a clue what the problem could be. I will list some general information as well as the results of the Odin process below:
Baseband Version: N910TUVUD0K2
Odin process result:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910T3UVU1DOK2_N910T3TMB1DOK2_N910T3UVU1DOK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks
Click to expand...
Click to collapse
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...
Catfish197621 said:
I just posted about this same issue a couple of days ago, if you go to my only post ive done so far you can see how we are in the same boat. What were you using before you got to your problem, which custom ROM?
Click to expand...
Click to collapse
I'm currently using [DOK2] TEKXodus HYBRID N4 URv7
mdiaz33685 said:
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...
Click to expand...
Click to collapse
I check and made sure that the reactivation lock was disabled, but it still didn't work. I guess I will keep an eye open to see if this issue can get resolved sometime in the near future
mdiaz33685 said:
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...
Click to expand...
Click to collapse
What are the odin settings for doing this install? I can't get it to recognize the file
Nevermind, quick google showed i should extract the file which im not used to doing for roms and use "AP"
waywardfrantz said:
What are the odin settings for doing this install? I can't get it to recognize the file
Nevermind, quick google showed i should extract the file which im not used to doing for roms and use "AP"
Click to expand...
Click to collapse
U have to unziip the firmware and in Odin u need to goto AP and point to the firmware... sometimes i have to remove the extention .md5 after u unzip the firmware depending on which Odin u use...
make sure u have the samsung drivers installed..
mdiaz33685 said:
U have to unziip the firmware and in Odin u need to goto AP and point to the firmware... sometimes i have to remove the extention .md5 after u unzip the firmware depending on which Odin u use...
make sure u have the samsung drivers installed..
Click to expand...
Click to collapse
I can't Odin to stock unless I change the name of the firmware file to .tar. it skips the md5 check I believe.
---------- Post added at 06:17 PM ---------- Previous post was at 06:14 PM ----------
Also go to supersu and do a full unroot before. I'm thinking maybe the supersu backup script could cause issues too
Im trying to install stock firmware on my note 5 and it keeps failing. Yes i do have the correct firware for my model and carrier. Hope some1 can help me out
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1205)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
jdq1412 said:
Im trying to install stock firmware on my note 5 and it keeps failing. Yes i do have the correct firware for my model and carrier. Hope some1 can help me out
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1205)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Who is your carrier and which firmware are you trying to use? Are you trying to downgrade/Update or something? Has the phone ever been rooted? Did you enable oem unlock in developer settings? It's kind of hard to just guess or help you with the information you've given us.
T-mobile and im trying to use stock note 5 firmware. Yes i was rooted and with a custom rom. Im trying to unroot the phone and put it back to stock but now it wont get past samsung note 5 logo and im still getting the fail from odin when trying to install the firmware.
jdq1412 said:
T-mobile and im trying to use stock note 5 firmware. Yes i was rooted and with a custom rom. Im trying to unroot the phone and put it back to stock but now it wont get past samsung note 5 logo and im still getting the fail from odin when trying to install the firmware.
Click to expand...
Click to collapse
That's because you rooted the phone and it tripped your Knox counter so the only way to fix this is to reinstall TWRP and then flash the rom again and after it's working go into SU and select remove root or whatever and then you'll need to extract the firmware you downloaded from T-Mobile and you'll need to put the files in the correct spot in Odin so they flash one at a time I.E. Boot, CM, RECOVERY etc etc... You should also try unzipping the firmware and then delete only cache.img and then repack/rezip it and try flashing it like that before trying all the other stuff.