Hi
My S6 is in loop reboot after i edit the build.prop... I have the original build.prop on my pc but how to restore it ??? Please help!
master-i said:
Hi
My S6 is in loop reboot after i edit the build.prop... I have the original build.prop on my pc but how to restore it ??? Please help!
Click to expand...
Click to collapse
If you have TWRP installed, you can just ADB the file over. Easy.
If you only rooted and want to preserve your KNOX flag, you need to ODIN back to stock and then re-root. It's not destructive, so it's not nearly as bad as it sounds
I don't have twrp for now but can i Install it on download mode ? I just tried to install it and it stop on Start upload (on odin)
Follow these instructions. Download ODIN from that link too
http://forum.xda-developers.com/tmo...irmware-sm-g920t-firmware-odin-guide-t3077706
Do i lose my data? and where Can I find the [Unified Driver Installer] on step 2?
No you won't lose your data at all, you will lose root, but all you need to do is re-root the phone.
http://developer.samsung.com/technical-doc/view.do?v=T000000117
I think it's easier to flash only the build.prop no? is it possible?
Thanx to help me bro!
No at this point, IMO, this is the easiest way to get you back to where you were. I assume you're on the stock ROM just rooted.
Yes, I were on the stock room just rooted by PingPong. Hope it will not make my phone slower or make it crash more often... :/
Yeah just ODIN back to stock, then re-root using PingPong, it's really not as bad as it sounds. All of your apps and user data including all settings will still be there.
@se1000
Please look this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Have you had your phone in download mode for a while? If so, try rebooting the phone
se1000 said:
Have you had your phone in download mode for a while? If so, try rebooting the phone
Click to expand...
Click to collapse
Of course I just retried again same error... I can't understand because I see the 0:COM3 on Odin...
Are you using the ODIN from the link? I had problems with other versions
se1000 said:
Are you using the ODIN from the link? I had problems with other versions
Click to expand...
Click to collapse
Yes the V3.10
Were you trying to run ADB earlier? Try rebooting the PC
I closed and reopen Ondin on Administrator and now it's blocked with: <ID:0/003> SetupConnection..
Try a different USB cable or different USB port. Seems ODIN can get a bit finicky
I rebooted PC and my Phone and unplugged and still the same
maybe it's because i tried to install twrp?
Shouldn't matter, as long as you're in download mode and ODIN shows light blue it should work
Related
I was trying to root my galaxy note, I download the rooted stock rom (N7000DXLC2) from here http://forum.xda-developers.com/showthread.php?t=1535025
but the odin failed and showing this
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000DXLC2.tar.md5 is valid.
<OSM> MODEM.tar.md5 is valid.
<OSM> CSC_N7000OLBLC2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> factoryfs.img
<ID:0/013> NAND Write Start!!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
then my phone can't boot anymore, it jus stuck at the samsung n7000 screen,
i tried to download stock rom and flash again, but it failed like above,
and when i go try to flash the kernel, it success to go to the recovery mode,
but it showing error like
E:Error in /cache/recovery/sec_csc.zip (status 7)
And i maybe forgot to enable usb debugging before i root, is this the cause? how i enable it now?
what can i do now? I tried to change port, change pc, uninstall kies, reinstall driver, close antivirus, and all doesn't work, please help...
To be sure, take out all unnecessary USB devices and use a USB port that's directly attached to your motherboard. Without your phone attached load Odin and load all files. Put the phone in Download mode and hook it up to your pc. When Odin recognizes it then try and flash again.
Make sure there's not a trace of Kies on the pc, just have the drivers installed.
USB debugging should not have to be enabled. There's no way of enabling it without booting up the phone and setting it in the options anyway.
bioweb said:
To be sure, take out all unnecessary USB devices and use a USB port that's directly attached to your motherboard. Without your phone attached load Odin and load all files. Put the phone in Download mode and hook it up to your pc. When Odin recognizes it then try and flash again.
Make sure there's not a trace of Kies on the pc, just have the drivers installed.
USB debugging should not have to be enabled. There's no way of enabling it without booting up the phone and set it in the options anyway.
Click to expand...
Click to collapse
I tried that, and I uninstalled the kies,
but the odin still showing the same error.
PROBLEM SOLVED
for who facing the same problem, just include a pit file in PIT,u can find it here
http://forum.xda-developers.com/showpost.php?p=23234683&postcount=10
solving this for whole day,thanks god it worked......
17n337 said:
PROBLEM SOLVED
for who facing the same problem, just include a pit file in PIT,u can find it here
http://forum.xda-developers.com/showpost.php?p=23234683&postcount=10
solving this for whole day,thanks god it worked......
Click to expand...
Click to collapse
CAUTION : Just dont go on blindly flashing the PIT file. Its a repartitioning file. To be used only when your partition is corrupted.
Galaxy Note stuck
hello,
I was running stock ICS 4.0.4 on my GT-N7000. I rooted my device. Took the titanium backup.
After this, i opened odin. Under phone i provided the path to my downloaded ICS 4.0.4 file. Odin started flashing the device but operation failed showing:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLRB_N7000ODDLR4_N7000DDLR1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> factoryfs.img
<ID:0/010> NAND Write Start!!
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010>
<ID:0/010> Receive Response form LOKE
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried many times but showing the same error everytime.
I am not able to go into the recovery mode......although i can go into the download mode.
When i reboot it says "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again." There is no samsung logo or GT-N7000 logo when you reboot your phone. You only see this warning.
I have some imp data on my internal memory(Phone storage). I have to save that data. Please please please help me out. Is there any way to recover phone storage data???
Can anyone explain my current situation...???
vinay28761 said:
I was running stock ICS 4.0.4 on my GT-N7000. I rooted my device. Took the titanium backup.
...
After this, i opened odin. Under phone i provided the path to my downloaded ICS 4.0.4 file. Odin started flashing the device but
...
<OSM> N7000DDLRB_N7000ODDLR4_N7000DDLR1_HOME.tar.md5 is valid.
...
Can anyone explain my current situation...???
Click to expand...
Click to collapse
First: this thread is marked as solved since april. Chances are very low for a reaction (but at least I did)
Second: Make a new one in Q&A
Third: What do you mean with "Took the TB"? Especially when you flash a new Stock Rom after
Fourth: Did you put the tar-file under "Phone"? Should be "PDA".
Fifth: Read a lot in the stickies here - good start for handling Odin is Dr. Ketan's thread
Sixth: your current situation might result from not reading enough. I hope you didn't brick your device and can restore a running Rom with the instructions from the stickies. Good Luck
how exactly did you reach this situation?
Did you resolve this ?
vinay28761 said:
hello,
I was running stock ICS 4.0.4 on my GT-N7000. I rooted my device. Took the titanium backup.
After this, i opened odin. Under phone i provided the path to my downloaded ICS 4.0.4 file. Odin started flashing the device but operation failed showing:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLRB_N7000ODDLR4_N7000DDLR1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> factoryfs.img
<ID:0/010> NAND Write Start!!
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010>
<ID:0/010> Receive Response form LOKE
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried many times but showing the same error everytime.
I am not able to go into the recovery mode......although i can go into the download mode.
When i reboot it says "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again." There is no samsung logo or GT-N7000 logo when you reboot your phone. You only see this warning.
I have some imp data on my internal memory(Phone storage). I have to save that data. Please please please help me out. Is there any way to recover phone storage data???
Can anyone explain my current situation...???
Click to expand...
Click to collapse
@vinay28761
I have your exact problem. Phone came to me with problem of hanging on Samsung N7000 Logo.
After flash everything, it shows error, exactly like yours.
Were you able to fix it? How ?
dannyogolo said:
@vinay28761
I have your exact problem. Phone came to me with problem of hanging on Samsung N7000 Logo.
After flash everything, it shows error, exactly like yours.
Were you able to fix it? How ?
Click to expand...
Click to collapse
Yes, i resolved it. I just followed dr. ketan's guide to flash through ODIN properly and exactly as described. I would request you to do the same.
Hope it solves your error too. If not, please post your screenshots.
could you jst give me details about dis nand write fail problem?i m having same problem in my gt n7000
Does anyone know where i can download PIT file for samsung gts6802 and a bootloader?
It woulb be very helpful. Thank You
For the past couple of days I've been unable to unroot my device using Odin, which I have done many of times on the past. I went to Sammobile and got the latest firmware to flash back to stock, but everytime I attempt to do so the process Fails. USB Debugging is enabled so I don't have a clue what the problem could be. I will list some general information as well as the results of the Odin process below:
Baseband Version: N910TUVUD0K2
Odin process result:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910T3UVU1DOK2_N910T3TMB1DOK2_N910T3UVU1DOK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks
Updated: I've stumbled across a thread here on XDA which has a mirror link to Stock TW Firmware/Bootloader/Modem N910TUVU2DOK2, and after flashing this mirror link using Odin... my phone now is unrooted and back to stock. Many thanks to ShrekOpher for posting the mirror link and here is a link to his post: http://forum.xda-developers.com/note-4-tmobile/development/mirror-stock-tw-t3260858
Same issue
I just posted about this same issue a couple of days ago, if you go to my only post ive done so far you can see how we are in the same boat. What were you using before you got to your problem, which custom ROM?
I had this problem on the note edge. What helped me was flashing cwm recovery and wiping everything
Trebor313 said:
For the past couple of days I've been unable to unroot my device using Odin, which I have done many of times on the past. I went to Sammobile and got the latest firmware to flash back to stock, but everytime I attempt to do so the process Fails. USB Debugging is enabled so I don't have a clue what the problem could be. I will list some general information as well as the results of the Odin process below:
Baseband Version: N910TUVUD0K2
Odin process result:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910T3UVU1DOK2_N910T3TMB1DOK2_N910T3UVU1DOK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks
Click to expand...
Click to collapse
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...
Catfish197621 said:
I just posted about this same issue a couple of days ago, if you go to my only post ive done so far you can see how we are in the same boat. What were you using before you got to your problem, which custom ROM?
Click to expand...
Click to collapse
I'm currently using [DOK2] TEKXodus HYBRID N4 URv7
mdiaz33685 said:
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...
Click to expand...
Click to collapse
I check and made sure that the reactivation lock was disabled, but it still didn't work. I guess I will keep an eye open to see if this issue can get resolved sometime in the near future
mdiaz33685 said:
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...
Click to expand...
Click to collapse
What are the odin settings for doing this install? I can't get it to recognize the file
Nevermind, quick google showed i should extract the file which im not used to doing for roms and use "AP"
waywardfrantz said:
What are the odin settings for doing this install? I can't get it to recognize the file
Nevermind, quick google showed i should extract the file which im not used to doing for roms and use "AP"
Click to expand...
Click to collapse
U have to unziip the firmware and in Odin u need to goto AP and point to the firmware... sometimes i have to remove the extention .md5 after u unzip the firmware depending on which Odin u use...
make sure u have the samsung drivers installed..
mdiaz33685 said:
U have to unziip the firmware and in Odin u need to goto AP and point to the firmware... sometimes i have to remove the extention .md5 after u unzip the firmware depending on which Odin u use...
make sure u have the samsung drivers installed..
Click to expand...
Click to collapse
I can't Odin to stock unless I change the name of the firmware file to .tar. it skips the md5 check I believe.
---------- Post added at 06:17 PM ---------- Previous post was at 06:14 PM ----------
Also go to supersu and do a full unroot before. I'm thinking maybe the supersu backup script could cause issues too
Hey i need some help ASAP
I tried to root my Note 5 and its now semi-bricked, I cant flash anything with Odin. It says NAND write start but then it fails, i can install TWRP Recovery but I'm not sure what i can do with it. The smart switch PC Software isn't recognizing the phone... PLEASE HELP!!! :crying:
Is there any way i can fix this without going to Samsung?
What i get in Odin:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N920CXXU1AOGE_CL5412468_QB5681922_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
BloodRedTiger1111 said:
Hey i need some help ASAP
I tried to root my Note 5 and its now semi-bricked, I cant flash anything with Odin. It says NAND write start but then it fails, i can install TWRP Recovery but I'm not sure what i can do with it. The smart switch PC Software isn't recognizing the phone... PLEASE HELP!!! :crying:
Is there any way i can fix this without going to Samsung?
Click to expand...
Click to collapse
Use kies. You'll need your model number and serial number tho
Put phone in download mode
Connect to pc
Open kies
Up top click tools
Then firmware upgrade and initialization
Put in your model and serial number
Click OK
Click start
Sent from my SM-N920G using XDA Labs
ShinySide said:
Use kies. You'll need your model number and serial number tho
Put phone in download mode
Connect to pc
Open kies
Up top click tools
Then firmware upgrade and initialization
Put in your model and serial number
Click OK
Click start
Sent from my SM-N920G using XDA Labs
Click to expand...
Click to collapse
Kies isn't recognizing the phone, anything else i can do? Ive tried different versions of Odin, a different pc, different USB Cables... not sure what to do now
BloodRedTiger1111 said:
Kies isn't recognizing the phone, anything else i can do? Ive tried different versions of Odin, a different pc, different USB Cables... not sure what to do now
Click to expand...
Click to collapse
I didnt see your odin output edit when I responded earlier...... Where did you get that firmware? I dont think its a genuine untouched file because of its name and the fact normally bootloader aboot/sbin/etc flash before recovery/boot/system. Id download a fresh copy of your current firmware from HERE (download is of course slow tho)
You can try reinstalling the drivers. Heres official samsung drivers- https://www.androidfilehost.com/?w=files&flid=150304
Hello, I have a big problem with my I9305, which had stock rom 4.4.4 XEO and root. The phone has been resetting on its own from time to time. Now the phone is dead, it freezes on the splash screen logo. Installing new room via Odin and DM doesn't work:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
In recovery menu there is message:
failed to mount /cache
Can't mount /cache/recovery/last_recovery
failed to mount /system
end so on...
Click to expand...
Click to collapse
What should I do?
Siadulinho said:
Hello, I have a big problem with my I9305, which had stock rom 4.4.4 XEO and root. The phone has been resetting on its own from time to time. Now the phone is dead, it freezes on the splash screen logo. Installing new room via Odin and DM doesn't work:
In recovery menu there is message:
What should I do?
Click to expand...
Click to collapse
Might be a corrupt nand, if that so, you will need to replace the board...sorry for bad news, maybe other member can have a different opinion.
Any options to make backup of SMS?
Siadulinho said:
Any options to make backup of SMS?
Click to expand...
Click to collapse
I don't think so, a corrupt NAND corrupts it all, i don't think you can boot anything on the phone anymore, however, a user here in XDA was able to use a memory card as a complete NAND and he even flashed a ROM and booted fine,but he was a skilled one, i don't know how he did it.
But he lost all data of course, so even if you did what he did, you won't get your SMSs.
Hi I'm new to XDA. My Note 8 (N950U) won't boot past the Samsung Galaxy Note 8 powered by android screen.
I can access the download mode and have flashed the stock firmware. But as soon as it reboots it gets stuck on the same screen.
Any help regarding this is much appreciated
factory reset.
android-incredible said:
factory reset.
Click to expand...
Click to collapse
I cant enter the recovery to perform a factory reset
RPG-XDA said:
I cant enter the recovery to perform a factory reset
Click to expand...
Click to collapse
Flash all 4 files in Odin instead of using home-csc file use CSC file. This will erase phone. Also make sure your on the latest Odin and using the same bootloader version.
Sent from my SM-N950F using Tapatalk
BluePhnx said:
Flash all 4 files in Odin instead of using home-csc file use CSC file. This will erase phone. Also make sure your on the latest Odin and using the same bootloader version.
Sent from my SM-N950F using Tapatalk
Click to expand...
Click to collapse
I already tried flashing both the HOME_CSC and CSC separately, but it didn't work. I'm able to successfully flash the firmware, but the phone is still stuck at the powered by android screen.
Do you know what caused the issue in the first place? Was it just on stock and suddenly won't boot? Were you using Samfail or anything like that? Just trying to narrow down the issue, because flashing stock should usually work.
sefrcoko said:
Do you know what caused the issue in the first place? Was it just on stock and suddenly won't boot? Were you using Samfail or anything like that? Just trying to narrow down the issue, because flashing stock should usually work.
Click to expand...
Click to collapse
Yes, I was on stock Oreo. Haven't tried rooting it or installing custom recovery. I came across some posts on the S8 forum with the same issue, but the solution mentioned there isn't working for me.
https://forum.xda-developers.com/galaxy-s8/help/galaxy-s8-g950fd-stuck-logo-flash-t3647926
RPG-XDA said:
Yes, I was on stock Oreo. Haven't tried rooting it or installing custom recovery. I came across some posts on the S8 forum with the same issue, but the solution mentioned there isn't working for me.
https://forum.xda-developers.com/galaxy-s8/help/galaxy-s8-g950fd-stuck-logo-flash-t3647926
Click to expand...
Click to collapse
Which Odin version are you using?
sefrcoko said:
Which Odin version are you using?
Click to expand...
Click to collapse
Odin 3 v3.13.1
RPG-XDA said:
Odin 3 v3.13.1
Click to expand...
Click to collapse
Possible to show a screenshot of Odin after the flash? To see the log messages and firmware version being flashed?
sefrcoko said:
Possible to show a screenshot of Odin after the flash? To see the log messages and firmware version being flashed?
Click to expand...
Click to collapse
Firmware version: N950U1UES5CRF6_N950U1OYM5CRF6_ATT
Odin log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 6197 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> bksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> tz.mbn
<ID:0/003> hyp.mbn
<ID:0/003> devcfg.mbn
<ID:0/003> pmic.elf
<ID:0/003> rpm.mbn
<ID:0/003> cmnlib.mbn
<ID:0/003> cmnlib64.mbn
<ID:0/003> keymaster.mbn
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> sec.dat
<ID:0/003> NON-HLOS.bin
<ID:0/003> storsec.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> persist.img.ext4
<ID:0/003> dqmdbg.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> adspso.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img.ext4
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Still stuck at the same boot screen. Still wondering why the Odin flash is successful, but the phone doesn't seem to even have a recovery to boot into.
RPG-XDA said:
Still stuck at the same boot screen. Still wondering why the Odin flash is successful, but the phone doesn't seem to even have a recovery to boot into.
Click to expand...
Click to collapse
Use USB 2.0,Also try unplugging it mid flash, Then reboot the phone, Does it boot to the screen where it tells you to connect with Smartswitch?
Samsunguser932 said:
Use USB 2.0,Also try unplugging it mid flash, Then reboot the phone, Does it boot to the screen where it tells you to connect with Smartswitch?
Click to expand...
Click to collapse
I tried your suggestion and I now get the screen which tells me to connect to smart switch. But when I run Smart Switch, it says the connected device cannot be recognized and Emergency recovery mode doesn't list the phone
RPG-XDA said:
I tried your suggestion and I now get the screen which tells me to connect to smart switch. But when I run Smart Switch, it says the connected device cannot be recognized and Emergency recovery mode doesn't list the phone
Click to expand...
Click to collapse
Okay, Just use ODIN then to try and restore it from that screen, Maybe that will work, Also try Smartswitch from Download mode, Make sure your drivers are installed.
Samsunguser932 said:
Okay, Just use ODIN then to try and restore it from that screen, Maybe that will work, Also try Smartswitch from Download mode, Make sure your drivers are installed.
Click to expand...
Click to collapse
I have installed all my drivers, but Smartswitch still won't detect my device. After flashing with Odin it goes back to being stuck on the Powered by android screen.
RPG-XDA said:
I have installed all my drivers, but Smartswitch still won't detect my device. After flashing with Odin it goes back to being stuck on the Powered by android screen.
Click to expand...
Click to collapse
When you flash with odin select Nand Erase from your options. then youll be able to boot if you flash WITH the AP,BL,CP and CSC
me2151 said:
When you flash with odin select Nand Erase from your options. then youll be able to boot if you flash WITH the AP,BL,CP and CSC
Click to expand...
Click to collapse
I tried using the Nand Erase option as you suggested, but it didn't change anything. I was just trying various button combinations and suddenly got the grey circle with the lightning bolt, but it wasn't charging. After some time the phone turned off and I haven't been able to get to that screen again. Any idea of what that could be?
Thats just the off mode charging(also known as low power mode)
me2151 said:
Thats just the off mode charging(also known as low power mode)
Click to expand...
Click to collapse
Oh. Didn't know that But even in that mode the phone just shows that symbol, even after I disconnect it from power.
Could this be a issue with the motherboard or is it just software, because I can still get into download mode and flash successfully?