Related
This is the situation:
Windows XP 32bit
Galaxy Note with LA4
Odin V1.85
KIES latest version
Latest Android SDK
I tried today to downgrade to a directly rootable stock ROM. It failed?
My Note stucks on the bootscreen.
I can put the Note in the downloadmode. When I start Odin, I see a yellow box under ID:COM with 0:[COM7], so my computer sees the Note. I want to flash the rootable stock ROM as described in many threads, especially following Dr. Ketans Guide
But it fails, it stucks at Initialzation..
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
I tried the LA4 stock ROM, same problem.
After this I have putted the Note in recovery mode and this is what I see:
"E:failed to mount /sdcard (Unknown error: 0)"
"E:install_application_for_customer:Can't mount /sdcard"
" your storage not prepared yet. please use UI menu for format and reboot actions."
"copy application failed"
In the recovery mode I tried Factory reset and Wipe cache...no effect.
Since 4pm I have tried many things, read threads and posts, but nothing has solved my problem. By the way I have not seen a problem as described above no where. Is there a genius who can solve this/my problem?
Or is my Note bricked?
The only thing i can see is that it can't mount the SD. Other than that, i don't know. And you know i had my own problems yesterday, so i'm not in the position to know what might be wrong. But one thing is sure, it's not bricked since you can enter download mode.
I know it's frustrating, but you'll have to wait for somebody that knows some things about Odin. I used it myself for the first time yesterday since the Note is my first Samsung device.
Sent from my iPad GT-N7000 using xda premium
see if you can turn off the note. press and hold volume + power and home to get to cwm.. do a data factory reset. then flash with odin in download mode. also make sure you put the correct files in odin when flashing. i had the same problem with my sg2 a few months back when i was fresh with android os. i spent 4 hours figuring it out when it only took 5 mins to fix lol.
dnyc said:
see if you can turn off the note. press and hold volume + power and home to get to cwm.. do a data factory reset. then flash with odin in download mode. also make sure you put the correct files in odin when flashing. i had the same problem with my sg2 a few months back when i was fresh with android os. i spent 4 hours figuring it out when it only took 5 mins to fix lol.
Click to expand...
Click to collapse
Connect to Kies and see if your phone is beeing recognized. If not reinstall the usb drivers. Reboot the phone and pc afterwards and try again. ENABLE USB DEBUGGING in settings also.
Hope it helps
I think this is related to SD card.(Internal)
Have you try using repartition?
I think it may work, NOTE THIS is just my thinking, I can't take any guarranty, you may use at your own risk, if other measures failed
Flash with repartition selected, n selecting pit file
here attached it (extract before use)for note 16GB (routine, not for 32GB)
Reflash stock rom with a different usb port and cable
Sent from my Transformer TF101 using xda premium
dnyc said:
see if you can turn off the note. press and hold volume + power and home to get to cwm.. do a data factory reset. then flash with odin in download mode. also make sure you put the correct files in odin when flashing. i had the same problem with my sg2 a few months back when i was fresh with android os. i spent 4 hours figuring it out when it only took 5 mins to fix lol.
Click to expand...
Click to collapse
As you can read I did trie data factory reset, after flash with Odin it didn't work. Thanks for your help.
gee2012 said:
Connect to Kies and see if your phone is beeing recognized. If not reinstall the usb drivers. Reboot the phone and pc afterwards and try again. ENABLE USB DEBUGGING in settings also.
Hope it helps
Click to expand...
Click to collapse
As you can read I can't ENABLE USB DEBUGGING, because I can't start my Note up normally. Thanks for your help.
Loftus said:
Reflash stock rom with a different usb port and cable
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
Thanks, but no effect.
dr.ketan said:
I think this is related to SD card.(Internal)
Have you try using repartition?
I think it may work, NOTE THIS is just my thinking, I can't take any guarranty, you may use at your own risk, if other measures failed
Flash with repartition selected, n selecting pit file
here attached it (extract before use)for note 16GB (routine, not for 32GB)
Click to expand...
Click to collapse
With the pit-file it showed PASS!:
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Removed!!
<ID:0/006> Added!!
At my screen the following:
Firmware upgrade encountered an isseu.
Please select recovery mode in Kies & try again
If I open Kies to select recevory mode it asks for a recovery code. I tried some codes like 0000,1234 and others, but no good...
Then, I entered the download mode of the Note and tried a flash with KK9 (one file) it shows PASS:
<ID:0/006> factoryfs.img
<ID:0/006> NAND Write Start!!
<ID:0/006> zImage
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006> cache.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Removed!!
....and it works now for me!!! I thought it was wipe, but I have now with KK9 the same apps and configuration as before on the LA4. Weird but good for me!
All of you thanks for your help, especially dr.Ketan
Note not bricked.
Problem solved.
And the problem was?
Sent from my GT-N7000 using xda premium
Read my first post...
got the same problem, did all you did, but get "fail" after is starts working.
any suggest?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> factoryfs.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
thanks
Caesarea038 said:
With the pit-file it showed PASS!:
....and it works now for me!!! I thought it was wipe, but I have now with KK9 the same apps and configuration as before on the LA4. Weird but good for me!
All of you thanks for your help, especially dr.Ketan
Click to expand...
Click to collapse
Really glad to hear.
It is really painful when some one say bricked lovely device.
its ok now, congratulation.
it is advisable once you format internal SD card. Not in hurry, but at least before next update.
Sent from my GT-N7000 using xda premium
shaharda said:
got the same problem, did all you did, but get "fail" after is starts working.
any suggest?
<ID:0/005> Added!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
...........................
<ID:0/005> factoryfs.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
thanks
Click to expand...
Click to collapse
Can you tell me exactly the problem and what you did step by step?
Loftus said:
Reflash stock rom with a different usb port and cable
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
Today I figured something out:
If you encounter problems with rooting/flashing try another or original USB cable, maybe a different USB port....
My problem as described in my first post was a combination of a fail USB cable and a software problem.
thanks for the help.
i'll try to replace my cable and try a new port.
what i did is trues to flash xxla4 from criskelo with Odin.
while doing that yhe action was breaked an since than i get the massege "an issue encountered...".
i tried almost everything (all i knew and mange to find in the net): tried again with odin, tried to flash 5 different roms from the list in dr.ketan thread.
tries to boot into recovery (no success), tried to recover with kies (it is not being identified by it).
now the battary won't charge. need to send it to the Lab.
thanks anyway. (i'll as them what they did)
shaharda said:
thanks for the help.
i'll try to replace my cable and try a new port.
what i did is trues to flash xxla4 from criskelo with Odin.
while doing that yhe action was breaked an since than i get the massege "an issue encountered...".
i tried almost everything (all i knew and mange to find in the net): tried again with odin, tried to flash 5 different roms from the list in dr.ketan thread.
tries to boot into recovery (no success), tried to recover with kies (it is not being identified by it).
Click to expand...
Click to collapse
Can you enter DOWNLOAD MODE?
Hello,
I bought s5830i and i did'n know about this 'i' so I try to install CMW5 for S5830 without 'i' and now when i'm trying turn on phone hanging on boot screen. Before I installed cmw5 i don't turn on "debbuging usb" option. And now when I want install branding soft via Odin it don't see my phone. I of course tunr on "download mode" using 'volume down'+'volume up'+'power' combination. What can i do whit this problem? I tried changing ports and computers. I think that problems is not chacked "debugging usb" but I dont know how i can check it now?
tamburyniarz said:
Hello,
I bought s5830i and i did'n know about this 'i' so I try to install CMW5 for S5830 without 'i' and now when i'm trying turn on phone hanging on boot screen. Before I installed cmw5 i don't turn on "debbuging usb" option. And now when I want install branding soft via Odin it don't see my phone. I of course tunr on "download mode" using 'volume down'+'volume up'+'power' combination. What can i do whit this problem? I tried changing ports and computers. I think that problems is not chacked "debugging usb" but I dont know how i can check it now?
Click to expand...
Click to collapse
Hello. Sorry for my english. You can try this guide http://forum.xda-developers.com/showthread.php?t=1551156
Sure you need Samsung Usb Driver or install Kies in your pc (kies installs drivers too).
good luck.
Now, odin see my device. I unistalled all drivers and whole Kies, and installed agan. But now I've another problem. When I trying flash Oden failed:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm using "Odin3_v1.84", PIT file : "cooperve_0623.pit" and ROM: "S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5" from samfirmware.com
I don't know what i'm doing wrong. I wanted add picture but i can't - I don't have 10 posts...
I used this ODIN 1.87 is preconfigured for 5830i you dont have to configure, only select files. The .pit file i used is include. http://forum.xda-developers.com/attachment.php?attachmentid=1058320&d=1336911330
1st. Turn on phone in download mode.
2nd. Press volumen up in phone to continue.
3rd. Plug usb in pc
4rd Open Odin.
Sorry for my english, good luck
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now it's this. Maybe other soft,but I dont know which one?
@edit
One more question: If i have one-file om i put it in PDA box?
To FirmWare Work in ODIN, is needed split file in parts, The ODIN only flashes BOOT PHONE PDA and CSC parts!
Docky73 builded one utility for CygWin and linux split the file in parts.http://forum.xda-developers.com/showthread.php?t=1611225
I'm do it! It's weird, but I only used other usb cable. When I do it all was fin. Thankfor helping. It was very helpfull.
Still not working
I have try the above method and i m still unable to flash this galaxy ace s5830i.
find attached the screenshoot that i took.
really need help to update this phone
thank in advance
Have you closed kies. . If kies running background your flashing will never get success. .May be silly but check once
Sent from galaxy ace running S3 beta 3.1 evolution
Kies is not installed I have remove it to prevent this issue
Sent from my GT-N7000 using xda app-developers app
Hi, I tried to flash something in odin and my pc stopped usb connection, and now my phone can enter only in download mode.
When I try to flash something odin says write error. I searched on the internet and I saw that it might be an flash lock.
But I dont selected it in odin. I called samsung, and they recommended me a service. And it will be repaired for 28 USD . Can someone help me? As I helped others, now I need your help!
I will sent it to service in 3 days! Also, the repair is not free, because I dont reset binary counter....now is custom (5)
use 3 file rom file
Try wit Secure PIT file
Antox97 said:
Try wit Secure PIT file
Click to expand...
Click to collapse
amir_n71 said:
use 3 file rom file
Click to expand...
Click to collapse
Sorry but no one solution is working. I whink that I can't recover my photos from internal sdcard.
On phone appears: ,,odin transaction fail,, when I am connecting it....and on pc ,,write fail,,
What TO DO???!!!
All depends on what file the USB connection stopped.
If it was fat.bin, then it's pretty much dead.
MrMateczko said:
All depends on what file the USB connection stopped.
If it was fat.bin, then it's pretty much dead.
Click to expand...
Click to collapse
It says write error on any file. I don't know why, I never checked flash lock.
Also 1 click unbrick for samsung devices in not running on my pc.
(flash progress won't start)
-----2 days until service
Odin messages
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S6500DBGMK1_S6500DXXMK1_S6500DXECML1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
MaDaLiNoSt said:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S6500DBGMK1_S6500DXXMK1_S6500DXECML1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I've NEVER seen that before It stop almost imediately Before flashing anything .. My Mini 2 stops in "Fat.Bin" .. Thats all .. did it showed any message at your phone ?? like "Secure Check Fail Id:0x95" ??
I never seen it too! I think that you must send your device into assistance, I'm really sorry
PHOTOS
Ezzam_Itachi said:
I've NEVER seen that before ... Did it showed any message at your phone ?? like "Secure Check Fail Id:0x95" ??
Click to expand...
Click to collapse
Now you can see how my phone is looking:
I see firmware error on power and recovery mode.
When I connect the usb cable in phone, I get error!
What to do??!! Next morning, tomorrow I will send it into service :crying:
Happy again
Hi, and thank you for all your feedbacks (posts). Now I recovered my phone with some pc softwares and everything is ok :victory:
Odin Log:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S6500DBGMK1_S6500DXXMK1_S6500DXECML1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img.ext4
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> fat.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> appsbl
<ID:0/003> oemsbl
<ID:0/003> partition.bin
<ID:0/003> qcsbl.mbn
<ID:0/003> qcsblhd_cfgdata.mbn
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
PC Screenshot:
Note: Next time when someone will have connecting issues with phone, is easy to post here and I will give help !
Do not create a new thread, because there are too many threads based same error. (eg. recovery ramdump or not working)
Owh, now I remember that writings.. For that I have sent my device into service :/
When your device are coming back, don't flash any firmware! If you have a NFC model, you must flash a NFC model like XXLD2!
Waw !! You made it !! :victory: okay now I need your help ... How did you do that ?? I oftenly flash my phone with odin .. Unfortunately, It never .. NEVER pass the flash ..It always failed .. Maybe with your solution I can get this done .. Thanks for your help !!
Little Flashing TUT
Ezzam_Itachi said:
How did you do that?
Click to expand...
Click to collapse
Download mini 2 firmware from SamMobile
Click to expand...
Click to collapse
Simply enter the model number of your device in the search box and a list of latest firmwares will come up. To download a firmware, you will need to be logged in to your SamMobile account using your username and password.
Click to expand...
Click to collapse
Demo Firmware list:
Disclaimer
SamMobile & me are not responsible if you brick or damage your device by using the files available on SamMobile Firmware Portal. You are doing all at your own risk! Proceed only if you are 100% sure that you know what you are doing.
Click to expand...
Click to collapse
Download and install compatible Kies from Samsung
Select Kies 2.6 for devices launched before September 2013
Click to expand...
Click to collapse
Now lastest drivers should be installed via kies application.
Download and install Odin3 from internet.
Click to expand...
Click to collapse
Now boot phone in download mode via an key combination: Volume down + home + power
If your device is not recognized, or windows failed istalling drivers (CDC or other driver)
use Zadig to force reinstall drive. Zadig can be found in heimdall unbrick pack for windows.
Click to expand...
Click to collapse
An alternative of Zadig is Microsoft Device manager. Select uninstall device from app menu, and then move usb cable to another port.
This solution might not solve your problem.
Click to expand...
Click to collapse
Good luck with flashing!
About you fat.bin error:
-Download another compatible rom
-That's it! : )
Amazing! Congratulations
Antox97 said:
Amazing! Congratulations
Click to expand...
Click to collapse
Thanks :laugh:
Thanks !!
Ezzam_Itachi said:
Thanks !!
Click to expand...
Click to collapse
No problem
Sent from my GT-S6500D using Tapatalk 2
Hi
My S6 is in loop reboot after i edit the build.prop... I have the original build.prop on my pc but how to restore it ??? Please help!
master-i said:
Hi
My S6 is in loop reboot after i edit the build.prop... I have the original build.prop on my pc but how to restore it ??? Please help!
Click to expand...
Click to collapse
If you have TWRP installed, you can just ADB the file over. Easy.
If you only rooted and want to preserve your KNOX flag, you need to ODIN back to stock and then re-root. It's not destructive, so it's not nearly as bad as it sounds
I don't have twrp for now but can i Install it on download mode ? I just tried to install it and it stop on Start upload (on odin)
Follow these instructions. Download ODIN from that link too
http://forum.xda-developers.com/tmo...irmware-sm-g920t-firmware-odin-guide-t3077706
Do i lose my data? and where Can I find the [Unified Driver Installer] on step 2?
No you won't lose your data at all, you will lose root, but all you need to do is re-root the phone.
http://developer.samsung.com/technical-doc/view.do?v=T000000117
I think it's easier to flash only the build.prop no? is it possible?
Thanx to help me bro!
No at this point, IMO, this is the easiest way to get you back to where you were. I assume you're on the stock ROM just rooted.
Yes, I were on the stock room just rooted by PingPong. Hope it will not make my phone slower or make it crash more often... :/
Yeah just ODIN back to stock, then re-root using PingPong, it's really not as bad as it sounds. All of your apps and user data including all settings will still be there.
@se1000
Please look this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Have you had your phone in download mode for a while? If so, try rebooting the phone
se1000 said:
Have you had your phone in download mode for a while? If so, try rebooting the phone
Click to expand...
Click to collapse
Of course I just retried again same error... I can't understand because I see the 0:COM3 on Odin...
Are you using the ODIN from the link? I had problems with other versions
se1000 said:
Are you using the ODIN from the link? I had problems with other versions
Click to expand...
Click to collapse
Yes the V3.10
Were you trying to run ADB earlier? Try rebooting the PC
I closed and reopen Ondin on Administrator and now it's blocked with: <ID:0/003> SetupConnection..
Try a different USB cable or different USB port. Seems ODIN can get a bit finicky
I rebooted PC and my Phone and unplugged and still the same
maybe it's because i tried to install twrp?
Shouldn't matter, as long as you're in download mode and ODIN shows light blue it should work
Hi I'm new to XDA. My Note 8 (N950U) won't boot past the Samsung Galaxy Note 8 powered by android screen.
I can access the download mode and have flashed the stock firmware. But as soon as it reboots it gets stuck on the same screen.
Any help regarding this is much appreciated
factory reset.
android-incredible said:
factory reset.
Click to expand...
Click to collapse
I cant enter the recovery to perform a factory reset
RPG-XDA said:
I cant enter the recovery to perform a factory reset
Click to expand...
Click to collapse
Flash all 4 files in Odin instead of using home-csc file use CSC file. This will erase phone. Also make sure your on the latest Odin and using the same bootloader version.
Sent from my SM-N950F using Tapatalk
BluePhnx said:
Flash all 4 files in Odin instead of using home-csc file use CSC file. This will erase phone. Also make sure your on the latest Odin and using the same bootloader version.
Sent from my SM-N950F using Tapatalk
Click to expand...
Click to collapse
I already tried flashing both the HOME_CSC and CSC separately, but it didn't work. I'm able to successfully flash the firmware, but the phone is still stuck at the powered by android screen.
Do you know what caused the issue in the first place? Was it just on stock and suddenly won't boot? Were you using Samfail or anything like that? Just trying to narrow down the issue, because flashing stock should usually work.
sefrcoko said:
Do you know what caused the issue in the first place? Was it just on stock and suddenly won't boot? Were you using Samfail or anything like that? Just trying to narrow down the issue, because flashing stock should usually work.
Click to expand...
Click to collapse
Yes, I was on stock Oreo. Haven't tried rooting it or installing custom recovery. I came across some posts on the S8 forum with the same issue, but the solution mentioned there isn't working for me.
https://forum.xda-developers.com/galaxy-s8/help/galaxy-s8-g950fd-stuck-logo-flash-t3647926
RPG-XDA said:
Yes, I was on stock Oreo. Haven't tried rooting it or installing custom recovery. I came across some posts on the S8 forum with the same issue, but the solution mentioned there isn't working for me.
https://forum.xda-developers.com/galaxy-s8/help/galaxy-s8-g950fd-stuck-logo-flash-t3647926
Click to expand...
Click to collapse
Which Odin version are you using?
sefrcoko said:
Which Odin version are you using?
Click to expand...
Click to collapse
Odin 3 v3.13.1
RPG-XDA said:
Odin 3 v3.13.1
Click to expand...
Click to collapse
Possible to show a screenshot of Odin after the flash? To see the log messages and firmware version being flashed?
sefrcoko said:
Possible to show a screenshot of Odin after the flash? To see the log messages and firmware version being flashed?
Click to expand...
Click to collapse
Firmware version: N950U1UES5CRF6_N950U1OYM5CRF6_ATT
Odin log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 6197 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> bksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> tz.mbn
<ID:0/003> hyp.mbn
<ID:0/003> devcfg.mbn
<ID:0/003> pmic.elf
<ID:0/003> rpm.mbn
<ID:0/003> cmnlib.mbn
<ID:0/003> cmnlib64.mbn
<ID:0/003> keymaster.mbn
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> sec.dat
<ID:0/003> NON-HLOS.bin
<ID:0/003> storsec.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> persist.img.ext4
<ID:0/003> dqmdbg.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> adspso.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img.ext4
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Still stuck at the same boot screen. Still wondering why the Odin flash is successful, but the phone doesn't seem to even have a recovery to boot into.
RPG-XDA said:
Still stuck at the same boot screen. Still wondering why the Odin flash is successful, but the phone doesn't seem to even have a recovery to boot into.
Click to expand...
Click to collapse
Use USB 2.0,Also try unplugging it mid flash, Then reboot the phone, Does it boot to the screen where it tells you to connect with Smartswitch?
Samsunguser932 said:
Use USB 2.0,Also try unplugging it mid flash, Then reboot the phone, Does it boot to the screen where it tells you to connect with Smartswitch?
Click to expand...
Click to collapse
I tried your suggestion and I now get the screen which tells me to connect to smart switch. But when I run Smart Switch, it says the connected device cannot be recognized and Emergency recovery mode doesn't list the phone
RPG-XDA said:
I tried your suggestion and I now get the screen which tells me to connect to smart switch. But when I run Smart Switch, it says the connected device cannot be recognized and Emergency recovery mode doesn't list the phone
Click to expand...
Click to collapse
Okay, Just use ODIN then to try and restore it from that screen, Maybe that will work, Also try Smartswitch from Download mode, Make sure your drivers are installed.
Samsunguser932 said:
Okay, Just use ODIN then to try and restore it from that screen, Maybe that will work, Also try Smartswitch from Download mode, Make sure your drivers are installed.
Click to expand...
Click to collapse
I have installed all my drivers, but Smartswitch still won't detect my device. After flashing with Odin it goes back to being stuck on the Powered by android screen.
RPG-XDA said:
I have installed all my drivers, but Smartswitch still won't detect my device. After flashing with Odin it goes back to being stuck on the Powered by android screen.
Click to expand...
Click to collapse
When you flash with odin select Nand Erase from your options. then youll be able to boot if you flash WITH the AP,BL,CP and CSC
me2151 said:
When you flash with odin select Nand Erase from your options. then youll be able to boot if you flash WITH the AP,BL,CP and CSC
Click to expand...
Click to collapse
I tried using the Nand Erase option as you suggested, but it didn't change anything. I was just trying various button combinations and suddenly got the grey circle with the lightning bolt, but it wasn't charging. After some time the phone turned off and I haven't been able to get to that screen again. Any idea of what that could be?
Thats just the off mode charging(also known as low power mode)
me2151 said:
Thats just the off mode charging(also known as low power mode)
Click to expand...
Click to collapse
Oh. Didn't know that But even in that mode the phone just shows that symbol, even after I disconnect it from power.
Could this be a issue with the motherboard or is it just software, because I can still get into download mode and flash successfully?