Database Develop

[PROBLEM SOLVED]Odin keep failed

I was trying to root my galaxy note, I download the rooted stock rom (N7000DXLC2) from here http://forum.xda-developers.com/showthread.php?t=1535025
but the odin failed and showing this
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000DXLC2.tar.md5 is valid.
<OSM> MODEM.tar.md5 is valid.
<OSM> CSC_N7000OLBLC2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> factoryfs.img
<ID:0/013> NAND Write Start!!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
then my phone can't boot anymore, it jus stuck at the samsung n7000 screen,
i tried to download stock rom and flash again, but it failed like above,
and when i go try to flash the kernel, it success to go to the recovery mode,
but it showing error like
E:Error in /cache/recovery/sec_csc.zip (status 7)
And i maybe forgot to enable usb debugging before i root, is this the cause? how i enable it now?
what can i do now? I tried to change port, change pc, uninstall kies, reinstall driver, close antivirus, and all doesn't work, please help...

To be sure, take out all unnecessary USB devices and use a USB port that's directly attached to your motherboard. Without your phone attached load Odin and load all files. Put the phone in Download mode and hook it up to your pc. When Odin recognizes it then try and flash again.
Make sure there's not a trace of Kies on the pc, just have the drivers installed.
USB debugging should not have to be enabled. There's no way of enabling it without booting up the phone and setting it in the options anyway.

bioweb said:
To be sure, take out all unnecessary USB devices and use a USB port that's directly attached to your motherboard. Without your phone attached load Odin and load all files. Put the phone in Download mode and hook it up to your pc. When Odin recognizes it then try and flash again.
Make sure there's not a trace of Kies on the pc, just have the drivers installed.
USB debugging should not have to be enabled. There's no way of enabling it without booting up the phone and set it in the options anyway.
Click to expand...
Click to collapse
I tried that, and I uninstalled the kies,
but the odin still showing the same error.

PROBLEM SOLVED
for who facing the same problem, just include a pit file in PIT,u can find it here
http://forum.xda-developers.com/showpost.php?p=23234683&postcount=10
solving this for whole day,thanks god it worked......

17n337 said:
PROBLEM SOLVED
for who facing the same problem, just include a pit file in PIT,u can find it here
http://forum.xda-developers.com/showpost.php?p=23234683&postcount=10
solving this for whole day,thanks god it worked......
Click to expand...
Click to collapse
CAUTION : Just dont go on blindly flashing the PIT file. Its a repartitioning file. To be used only when your partition is corrupted.

Galaxy Note stuck
hello,
I was running stock ICS 4.0.4 on my GT-N7000. I rooted my device. Took the titanium backup.
After this, i opened odin. Under phone i provided the path to my downloaded ICS 4.0.4 file. Odin started flashing the device but operation failed showing:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLRB_N7000ODDLR4_N7000DDLR1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> factoryfs.img
<ID:0/010> NAND Write Start!!
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010>
<ID:0/010> Receive Response form LOKE
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried many times but showing the same error everytime.
I am not able to go into the recovery mode......although i can go into the download mode.
When i reboot it says "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again." There is no samsung logo or GT-N7000 logo when you reboot your phone. You only see this warning.
I have some imp data on my internal memory(Phone storage). I have to save that data. Please please please help me out. Is there any way to recover phone storage data???
Can anyone explain my current situation...???

vinay28761 said:
I was running stock ICS 4.0.4 on my GT-N7000. I rooted my device. Took the titanium backup.
...
After this, i opened odin. Under phone i provided the path to my downloaded ICS 4.0.4 file. Odin started flashing the device but
...
<OSM> N7000DDLRB_N7000ODDLR4_N7000DDLR1_HOME.tar.md5 is valid.
...
Can anyone explain my current situation...???
Click to expand...
Click to collapse
First: this thread is marked as solved since april. Chances are very low for a reaction (but at least I did)
Second: Make a new one in Q&A
Third: What do you mean with "Took the TB"? Especially when you flash a new Stock Rom after
Fourth: Did you put the tar-file under "Phone"? Should be "PDA".
Fifth: Read a lot in the stickies here - good start for handling Odin is Dr. Ketan's thread
Sixth: your current situation might result from not reading enough. I hope you didn't brick your device and can restore a running Rom with the instructions from the stickies. Good Luck

how exactly did you reach this situation?

Did you resolve this ?
vinay28761 said:
hello,
I was running stock ICS 4.0.4 on my GT-N7000. I rooted my device. Took the titanium backup.
After this, i opened odin. Under phone i provided the path to my downloaded ICS 4.0.4 file. Odin started flashing the device but operation failed showing:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLRB_N7000ODDLR4_N7000DDLR1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> factoryfs.img
<ID:0/010> NAND Write Start!!
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010>
<ID:0/010> Receive Response form LOKE
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried many times but showing the same error everytime.
I am not able to go into the recovery mode......although i can go into the download mode.
When i reboot it says "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again." There is no samsung logo or GT-N7000 logo when you reboot your phone. You only see this warning.
I have some imp data on my internal memory(Phone storage). I have to save that data. Please please please help me out. Is there any way to recover phone storage data???
Can anyone explain my current situation...???
Click to expand...
Click to collapse
@vinay28761
I have your exact problem. Phone came to me with problem of hanging on Samsung N7000 Logo.
After flash everything, it shows error, exactly like yours.
Were you able to fix it? How ?

dannyogolo said:
@vinay28761
I have your exact problem. Phone came to me with problem of hanging on Samsung N7000 Logo.
After flash everything, it shows error, exactly like yours.
Were you able to fix it? How ?
Click to expand...
Click to collapse
Yes, i resolved it. I just followed dr. ketan's guide to flash through ODIN properly and exactly as described. I would request you to do the same.
Hope it solves your error too. If not, please post your screenshots.

could you jst give me details about dis nand write fail problem?i m having same problem in my gt n7000

Does anyone know where i can download PIT file for samsung gts6802 and a bootloader?
It woulb be very helpful. Thank You

Need help flashing a Rom!!!!

I succesfully flashed Fusion V2 in my GNote. I've being trying to flash thru Odin a Stock Rom since I just prefer Stock. I flashed a GB Kernel, I think its called Abyss (sorry If I Mispell). And then try to flash the Stock ICS Rom. The process stops at:
FactoryFS.img
Nand write Start.
It stops right there.
What should I do????
Sorry for my english.

kindly post your full error log here, whether it was stopped with msg successfull0/failed 1 Or it was stuck?

dr.ketan said:
kindly post your full error log here, whether it was stopped with msg successfull0/failed 1 Or it was stuck?
Click to expand...
Click to collapse
The thing is that Odin doesnt show any error, it just stops. I waited 30mins and nothing so I unplugged the phone. The phone didnt show a download bar. The phone was in download mode.

That is really bad sign
Any way download any Stock GB ROM
and flash again with pit file
If your device is 16GB model (not 32GB) then use this pit with re partition option enable on PC Odin
http://d-h.st/FVh

dr.ketan said:
That is really bad sign
Any way download any Stock GB ROM
and flash again with pit file
If your device is 16GB model (not 32GB) then use this pit with re partition option enable on PC Odin
http://d-h.st/FVh
Click to expand...
Click to collapse
Yes is a 16gb model. Where can I get the Pit file?

I have pasted link in my previous post, And you have quoted too.

darielsantana said:
Yes is a 16gb model. Where can I get the Pit file?
Click to expand...
Click to collapse
Perfect just saw the download link.
Ill try that once I get home.
Btw your posts are great. Thanks for them.

dr.ketan said:
I have pasted link in my previous post, And you have quoted too.
Click to expand...
Click to collapse
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
Im trying to flash the GB Rom with the Pit file you gave me and thats the msg I get. Is this process really slow or am I having trouble?
I have around 10mins waiting and nothing else is happening

darielsantana said:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
Im trying to flash the GB Rom with the Pit file you gave me and thats the msg I get. Is this process really slow or am I having trouble?
I have around 10mins waiting and nothing else is happening
Click to expand...
Click to collapse
Got this error!!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)

It appears ODIN is struggling to find your device, Do you have the correct drivers installed ? Have you exited kies (including system tray?) Have you tried alternative USB ports ? Preferably direct into the MoBo (back of tower?) What shows up in ODIN when you connect your phone in download mode ?

azzledazzle said:
It appears ODIN is struggling to find your device, Do you have the correct drivers installed ? Have you exited kies (including system tray?) Have you tried alternative USB ports ? Preferably direct into the MoBo (back of tower?) What shows up in ODIN when you connect your phone in download mode ?
Click to expand...
Click to collapse
Now it connected but when trying to Flash Stock GB it shows this:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000OXXKK6_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> factoryfs.img
whats happening? why cant i flash the rom??

How log has it been stuck like that for ??
Usually sticking at factoryfs.img is not a good sign, You can use the unbrick method to repartition the phone and get you up and running again, However you will lose some space (2-3gb)
Here's the link http://forum.xda-developers.com/showthread.php?t=1667886
I would wait for some confirmation from someone else firstly, Someone like the god himself - Dr.Ketan
Ive never bricked my note so luckily ive never had to try that method ^^

azzledazzle said:
How log has it been stuck like that for ??
Usually sticking at factoryfs.img is not a good sign, You can use the unbrick method to repartition the phone and get you up and running again, However you will lose some space (2-3gb)
Here's the link http://forum.xda-developers.com/showthread.php?t=1667886
I would wait for some confirmation from someone else firstly, Someone like the god himself - Dr.Ketan
Ive never bricked my note so luckily ive never had to try that method ^^
Click to expand...
Click to collapse
Yeah I followed that method but only can flash Custom Roms after the repartition. I dont know what to do :S. I've being waiting his reply.

Why can you only flash custom ROMs ? Cant you flash a stock one via ODIN but include the patched .pit file ?
Sorry im of no use

azzledazzle said:
Why can you only flash custom ROMs ? Cant you flash a stock one via ODIN but include the patched .pit file ?
Sorry im of no use
Click to expand...
Click to collapse
I cant flash stock rom with pit file given :s
Its ok at least someone is trying to help

Do you have warranty ?? You could flash a stock ROM without pit, which will put your phone back into the bricked state, Then send it off for warranty ?

azzledazzle said:
Do you have warranty ?? You could flash a stock ROM without pit, which will put your phone back into the bricked state, Then send it off for warranty ?
Click to expand...
Click to collapse
no warranty

Why dont you have warranty ? All Samsungs come with at least 12-24 months manufacturer warranty.

azzledazzle said:
Why dont you have warranty ? All Samsungs come with at least 12-24 months manufacturer warranty.
Click to expand...
Click to collapse
well i might have but I bought in Ebay. And live at Dominican Republic. There is no Samsung representative over here. And I dont have a Bill.

Well hold on for some other opinions, But if you dont get a solution then consider sending it to samsung, They should repair it, However you might have to pay postage charges, Give them a call first and blame it on a OTA / Kies update

[Help needed] Odin don't detect S5830i.

Hello,
I bought s5830i and i did'n know about this 'i' so I try to install CMW5 for S5830 without 'i' and now when i'm trying turn on phone hanging on boot screen. Before I installed cmw5 i don't turn on "debbuging usb" option. And now when I want install branding soft via Odin it don't see my phone. I of course tunr on "download mode" using 'volume down'+'volume up'+'power' combination. What can i do whit this problem? I tried changing ports and computers. I think that problems is not chacked "debugging usb" but I dont know how i can check it now?

tamburyniarz said:
Hello,
I bought s5830i and i did'n know about this 'i' so I try to install CMW5 for S5830 without 'i' and now when i'm trying turn on phone hanging on boot screen. Before I installed cmw5 i don't turn on "debbuging usb" option. And now when I want install branding soft via Odin it don't see my phone. I of course tunr on "download mode" using 'volume down'+'volume up'+'power' combination. What can i do whit this problem? I tried changing ports and computers. I think that problems is not chacked "debugging usb" but I dont know how i can check it now?
Click to expand...
Click to collapse
Hello. Sorry for my english. You can try this guide http://forum.xda-developers.com/showthread.php?t=1551156
Sure you need Samsung Usb Driver or install Kies in your pc (kies installs drivers too).
good luck.

Now, odin see my device. I unistalled all drivers and whole Kies, and installed agan. But now I've another problem. When I trying flash Oden failed:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm using "Odin3_v1.84", PIT file : "cooperve_0623.pit" and ROM: "S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5" from samfirmware.com
I don't know what i'm doing wrong. I wanted add picture but i can't - I don't have 10 posts...

I used this ODIN 1.87 is preconfigured for 5830i you dont have to configure, only select files. The .pit file i used is include. http://forum.xda-developers.com/attachment.php?attachmentid=1058320&d=1336911330
1st. Turn on phone in download mode.
2nd. Press volumen up in phone to continue.
3rd. Plug usb in pc
4rd Open Odin.
Sorry for my english, good luck

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now it's this. Maybe other soft,but I dont know which one?
@edit
One more question: If i have one-file om i put it in PDA box?

To FirmWare Work in ODIN, is needed split file in parts, The ODIN only flashes BOOT PHONE PDA and CSC parts!
Docky73 builded one utility for CygWin and linux split the file in parts.http://forum.xda-developers.com/showthread.php?t=1611225

I'm do it! It's weird, but I only used other usb cable. When I do it all was fin. Thankfor helping. It was very helpfull.

Still not working
I have try the above method and i m still unable to flash this galaxy ace s5830i.
find attached the screenshoot that i took.
really need help to update this phone
thank in advance

Have you closed kies. . If kies running background your flashing will never get success. .May be silly but check once
Sent from galaxy ace running S3 beta 3.1 evolution

Kies is not installed I have remove it to prevent this issue
Sent from my GT-N7000 using xda app-developers app

Odin help please!!!!

Hi
Can somebody help me with this problem
Firstly during an official update from 2.3.6 to 4.0.4 using KIES bombed out at 4% so soft bricked is what we call it!!!
Can only boot into download mode so using odin to wack on
"N7000XXLRG_N7000DBTLRG_DBT\N7000XXLRG_N7000DBTLRG_N7000XXLRB_HOME.tar.md5"
Following message appears in Odin
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRG_N7000DBTLRG_N7000XXLRB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> factoryfs.img
<ID:0/006> NAND Write Start!!
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006>
<ID:0/006> Receive Response form LOKE
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there anyway I can force write to it?
Could it be the firmware that is the issue or would I get this on everything I try?
Please help
Thanks

EFCLEE said:
Hi
Can somebody help me with this problem
Firstly during an official update from 2.3.6 to 4.0.4 using KIES bombed out at 4% so soft bricked is what we call it!!!
Can only boot into download mode so using odin to wack on
"N7000XXLRG_N7000DBTLRG_DBT\N7000XXLRG_N7000DBTLRG_N7000XXLRB_HOME.tar.md5"
Following message appears in Odin
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006>
<ID:0/006> Receive Response form LOKE
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there anyway I can force write to it?
Could it be the firmware that is the issue or would I get this on everything I try?
Please help
Thanks
Click to expand...
Click to collapse
Did you select the firmware .tar file in odin PDA tab only?
This sometimes happens due to bad download file, try flashing some other firmware, preferably GB so that you can wipe if required.
search google with 'Receive Response form LOKE" and you will find lot of people having same issue and most of them able to resolve by flashing different firmware.

jeetu1981 said:
Did you selected the firmware .tar file in odin PDA tab only?
This sometimes happens due to bad download file, try flashing some other firmware, preferably GB so that you can wipe if required.
search google with 'Receive Response form LOKE" and you will find lot of people having same issue and most of them able to resolve by flashing different firmware.
Click to expand...
Click to collapse
No I have been adding it to PHONE, is this wrong?
Anyways I just tried it again adding to PDA and this time it gets stuck on
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRI_N7000OXXLP8_N7000XXLRB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
Any ideas?

EFCLEE said:
No I have been adding it to PHONE, is this wrong?
Anyways I just tried it again adding to PDA and this time it gets stuck on
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRI_N7000OXXLP8_N7000XXLRB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
Any ideas?
Click to expand...
Click to collapse
Yes, its completely wrong, you should select single firmware .tar in PDA tab only. Try again by rebooting your phone and check if you have kies running, if so close it completely.
SUGGESTION- Do not flash ICS stock rom now, I am not sure what has been messed up by flashing this using phone tab (ICS phone files on GB base, not sure), best is flash stock GB firmware first, then wipe in stock recovery and flash ICS.

jeetu1981 said:
Yes, its completely wrong, you should select single firmware .tar in PDA tab only. Try again by rebooting your phone and check if you have kies running, if so close it completely.
SUGGESTION- Do not flash ICS stock rom now, I am not sure what has been messed up by flashing this using phone tab (ICS phone files on GB base, not sure), best is flash stock GB firmware first, then wipe in stock recovery and flash ICS.
Click to expand...
Click to collapse
WOW!!! Restarted phone wacked it into PDA and BAM!! started to copy over!!!
A million thank you's Jeetu1981 your a fkin diamond!!!!!

EFCLEE said:
WOW!!! Restarted phone wacked it into PDA and BAM!! started to copy over!!!
A million thank you's Jeetu1981 your a fkin diamond!!!!!
Click to expand...
Click to collapse
Cool... Consider urself lucky this time
And click on thanks is better than million thanks, lol
Sent from my GT-N7000

[Q] Hard Reset on broken screen device

Hi all,
unfortunately i have broken the screen of my Note, completely, no touch response and something like this.
I'm be able to connect the phone with kies and recover all data, but with kies it's impossibile to reset the firmware.
I want to sell my phone as broken phone but i need to do an hard reset to be sure that all personal data is deleted,
how i can do this?
Thanks a lot guys

is the screen lil bit visible?

nokiamodeln91 said:
is the screen lil bit visible?
Click to expand...
Click to collapse
no completely black with no touch response

what rom were u on. If u r able to connect to kies the. u should be able to see the phones drives in my computer as well. u can delete some data from there.

I guess u can do it using adb

If you need to do factory-reset,follow the following steps:
Download this
Open ODIN
put factory_reset.tar.md5 in PDA section and donot check/uncheck anything else...
Put your phone in download mode and connect it to PC.
hit start and it will flash and reboot.
And the device will be factory resetted
ODIN is attached in this post if you need it

This is a very good news, just 2 questions:
1. to put my phone in download mode i have to switch on the phone keeping pressed "volume down" "home" and "power" after just press volume down to enter in download mode, is that right ?
2. if i do the step 5 and the phone is not in download mode what happen?
the screen is completely black and i'll be blind when follow this steps

maybe i have done something wrong but i don't know what...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> factory_reset.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

duombo said:
maybe i have done something wrong but i don't know what...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> factory_reset.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It failed at setting up connection...is kies running at background???if yes,stop its service and try again...
Sent from my GT-N7000 using xda app-developers app

duombo said:
This is a very good news, just 2 questions:
1. to put my phone in download mode i have to switch on the phone keeping pressed "volume down" "home" and "power" after just press volume down to enter in download mode, is that right ?
2. if i do the step 5 and the phone is not in download mode what happen?
the screen is completely black and i'll be blind when follow this steps
Click to expand...
Click to collapse
Step 1 is wrong
Volume down + home +power
That will lead to warning Page
Here you have to press volume up (you wrote down) to enter download mode,
And looking to log device added two times, this corelate your mistake , because you are pressing volume down in warning Page that will reboot your device normally instead of download mode and after booting it gets added again
One thing I want to add, the file you are flashing will raise flash counter, so if you are covered under warranty, this may voids warranty.
Alternatively you can flash stock rom file for CSC tab, that will erase everything.
Sent from my GT-N7100 using xda premium

dr.ketan said:
Step 1 is wrong
Volunteer down + home +power
That will lead to warning Page
Here you have to press volume up (you wrote down) to enter download mode,
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
he he.. r u using swiftkey?? damm! autocorrect
---------- Post added at 02:18 AM ---------- Previous post was at 02:17 AM ----------
but u correctly pointed it out

Oohhh that idiot swift key, you also have pointed out correctly
Sent from my GT-N7100 using xda premium

dr.ketan said:
Step 1 is wrong
Volume down + home +power
That will lead to warning Page
Here you have to press volume up (you wrote down) to enter download mode,
And looking to log device added two times, this corelate your mistake , because you are pressing volume down in warning Page that will reboot your device normally instead of download mode and after booting it gets added again
One thing I want to add, the file you are flashing will raise flash counter, so if you are covered under warranty, this may voids warranty.
Alternatively you can flash stock rom file for CSC tab, that will erase everything.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
I think it wont raise the counter because its just an empty data partition and some stock rom contains this.As far as I know only flashing modified kernel will raise the counter.But today evening i will test to confirm it
Sent from my GT-N7000 using xda app-developers app

I don't think counter matters at this moment.. He wants to sell the phone so he wants to delete data.

vijai2011 said:
It failed at setting up connection...is kies running at background???if yes,stop its service and try again...
Click to expand...
Click to collapse
thanks i will try again, btw yes in pc was running some kies process i will try to kill them
dr.ketan said:
Step 1 is wrong
Volume down + home +power
That will lead to warning Page
Here you have to press volume up (you wrote down) to enter download mode
Click to expand...
Click to collapse
ok, thanks for correct my mistake
nokiamodeln91 said:
I don't think counter matters at this moment.. He wants to sell the phone so he wants to delete data.
Click to expand...
Click to collapse
Right, i only need to erase my personal data, after selling the phone, the guy have bought my phone have a new screen of Note and when he repair the screen than he will be able to flash with what he want, i want just be sure to erase all of my personal stuff
Thank you very much guys i will keep you updated

<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> factory_reset.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> data.img
<ID:0/010> NAND Write Start!!
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010>
<ID:0/010> Receive Response from boot-loader
<ID:0/010> Complete(Write) operation failed.
<ID:0/010> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Guys i don't know what's wrong now... any help?!?!?
Don't worry the 2nd time go ok ))
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> factory_reset.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> data.img
<ID:0/010> NAND Write Start!!
<ID:0/010> RQT_CLOSE !!
<ID:0/010> RES OK !!
<ID:0/010> Completed..
<ID:0/010> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/010> Removed!!
OK, the last question (sorry for all of this trouble, and for my bad english), now, with this operation, i'm SURE that all of my data was deleted from the phone, right?

duombo said:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> factory_reset.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> data.img
<ID:0/010> NAND Write Start!!
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010>
<ID:0/010> Receive Response from boot-loader
<ID:0/010> Complete(Write) operation failed.
<ID:0/010> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Guys i don't know what's wrong now... any help?!?!?
Click to expand...
Click to collapse
I think you must be doing something wrong...
I downloaded the file which i uploaded(to verify that its ok) and flashed it with Odin and The result is pass..Log is here..
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> factory_reset.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> data.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
Attached a pic too...Maybe you doin something wrong on your side???
General info:It didnt raise the counter
Edit:Good that you have passed .Yeah everything on data is wiped now.But files on sd will remain...

vijai2011 said:
General info:It didnt raise the counter
Edit:Good that you have passed .Yeah everything on data is wiped now.But files on sd will remain...
Click to expand...
Click to collapse
i removed the sd card before start this process
what is the counter? (bad question eh!? really sorry)
ok now everything is cleared and i can give my phone to the buyer :good:
btw i don't know how to say thank you at all, specially at vijai2011

duombo said:
i removed the sd card before start this process
what is the counter? (bad question eh!? really sorry)
ok now everything is cleared and i can give my phone to the buyer :good:
btw i don't know how to say thank you at all, specially at vijai2011
Click to expand...
Click to collapse
yes you can give now...
Custom binary Counter is something put up by samsung on our phones that shows them how may time we have flashed insecure (modified kernel) on our phone.It is shown in download mode.But it can be easy resetted on a rooted phone using TriangleAway app by chainfire.
And you can press thanks for all my posts if you really need to thank me .But remember you can only give 8 thanks per day

can i push "thanks" 2 times per post?
thank you very much